Structural Engineering Expert Witnesses

The SEAK Expert Witness Directory contains a comprehensive list of structural engineering expert witnesses who testify, consult and provide litigation support on structural engineering and related issues. Structural engineering expert witnesses and consultants on this page may form expert opinions, draft expert witness reports, and provide expert witness testimony at deposition and trial. The issues and subjects these structural engineering expert witnesses testify regarding may include: Structural Engineering, Construction, Construction Defects, Civil Engineering, Forensic Engineering, Building Codes, Concrete, Failure Analysis, Foundations, Masonry, Mechanical Engineering, Steel, Retaining Walls, Drainage, and Engineering.

Use the search box above to further refine your search for structural engineering expert witnesses by keyword and state. Attorneys contact the experts directly – with no middleman.

Lamar T. Hawkins, PE, JD PEG, Inc.

Birmingham, Alabama
Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.
PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Carl H. Josephson, PE, SE Josephson-Werdowatz & Associates, Inc.

Arizona
Structural Engineering, Engineering - Wood, masonry, steel, concrete structures. Construction defect, insurance litigation, professional liability claims. Seismic/wind design, code review, standard of care analysis. Also foundations, underpinning, retaining walls, and tie-backs. Extensive graphics and animations capabilities.
Josephson-Werdowatz & Associates (JWA), founded in 1988 and with licenses in thirty states, has provided structural design and construction defect investigations/evaluations across the United States and abroad. Structural evaluations included wood, masonry, steel, and concrete structures, with particular emphasis on seismic and wind design. JWA has experience working with specialty materials such as acrylic, aluminum, and glass as well. Evaluations also include code review and analysis, and standard of care analysis. JWA has extensive experience with geotechnical structures such as special foundations, underpinning, retaining walls, tie-backs, and soil nails, among others. JWA strives for a reasoned, accurate, and practical solution to structural engineering problems and deficiencies. Principal Structural Engineers Carl H. Josephson, PE, SE; Dan R. Werdowatz PE, SE; and Stephen P. Kerr, PE, SE have been retained as expert witnesses in over 1,500 cases for plaintiff and defense cli...

Carl H. Josephson, PE, SE Josephson-Werdowatz & Associates, Inc.

San Diego, California
Structural Engineering, Engineering - Wood, masonry, steel, concrete structures. Construction defect, insurance litigation, professional liability claims. Seismic/wind design, code review, standard of care analysis. Also foundations, underpinning, retaining walls, and tie-backs. Extensive graphics and animations capabilities.
Josephson-Werdowatz & Associates (JWA), founded in 1988 and with licenses in thirty states, has provided structural design and construction defect investigations/evaluations across the United States and abroad. Structural evaluations included wood, masonry, steel, and concrete structures, with particular emphasis on seismic and wind design. JWA has experience working with specialty materials such as acrylic, aluminum, and glass as well. Evaluations also include code review and analysis, and standard of care analysis. JWA has extensive experience with geotechnical structures such as special foundations, underpinning, retaining walls, tie-backs, and soil nails, among others. JWA strives for a reasoned, accurate, and practical solution to structural engineering problems and deficiencies. Principal Structural Engineers Carl H. Josephson, PE, SE; Dan R. Werdowatz PE, SE; and Stephen P. Kerr, PE, SE have been retained as expert witnesses in over 1,500 cases for plaintiff and defense cli...

Craig L Moskowitz, PE, MBA, MS CLM Engineering Associates, LLC

Stamford, Connecticut
Premises Liability, Construction Defects - OSHA, construction, slips/trips/falls, storm damage, water intrusion, roofing systems, warranty inspections, civil engineering, structural engineering, building collapse, property condition assessment, building codes, forensic engineering, engineering expert, construction accidents, personal injury
Since 2010, the President and Managing Member of CLM Engineering Associates, LLC, which concentrates its focus on forensic engineering/expert witness work for the insurance industry and legal community. In addition, we offer construction management, civil engineering and building inspection services. Prior experience includes extensive construction management work on both commercial and residential projects. Performed safety inspections on both civilian and military projects through application of OSHA regulations. Designed drainage systems for the government while an officer with the United States military. Cost estimating for various projects exceeding $500 million. Design document creation and management of high-rise construction in Manhattan. marketplace. Management of telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating. Directed and managed all water distribution system and sewer system work while working as a contractor to th...

Brian K Bramel, SE, PE, Ph.D. Bramel Engineering

District Of Columbia
Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build
Dr. Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder. He is a current member of the New York City Building Code R...

Richard S. Barrow, PE, SI Barrow Engineering, LLC

Estero, Florida
Structural Engineering, Building Inspection - Structural failures, structural engineering, Structural design, design errors, structural inspections, building collapse, building codes, structural repairs, forensic engineering, special inspector, special inspection, threshold inspection
Mr. Barrow has been practicing structural engineering for the past 35 years. He founded Barrow Engineering, LLC which focuses on forensic engineering and the associated repairs and claim investigations. Mr. Barrow has performed numerous forensic investigations involving structural failures, design deficiencies, faulty construction, construction pay applications, failure to disclose defects, grading issues, cladding failures, roof damage, site plans, pool leaks, water intrusion, fire, wind, subsidence, and vehicular impact. Design of shoring, and other remedial actions have been provided as part of forensic projects where there are conditions that may become unsafe or need repair. Mr. Barrow is experienced in insurance claim work, litigation, and testimony involving legal issues. He has testified under oath in court and in depositions and has presented at mediation and arbitration hearings. Prior to Barrow Engineering, LLC, Mr. Barrow was the president and founder of Liebl & Barr...

Nick M Bradford, PhD PE SE SI TSG Engineering, Inc.

Tampa, Florida
Structural Engineering, Construction Engineering - Structural Failure / Collapse, Structural design, Structural Analysis, Structural Inspections, Building Code Analysis, Construction Defects, Forensic Engineering, Hurricane Engineering, Failure Analysis, Wind Engineering, Flood Engineering
Dr. Bradford has been a practicing structural engineer for the past 27 years. Dr. Bradford is the president and founder of TSG Engineering, located in Tampa, Florida. TSG Engineering provides structural engineering for new construction projects as well as forensic investigations. Since our inception as The Structures Group, Inc. in 1999, we have worked on over 9,000 projects. In the area of new construction, we provide structural engineering for projects in the areas of custom residential, production builder residential, multi-family residential, retail/commercial construction, churches, industrial facilities and warehouses. We provide specialty structural engineering services such as controlled demolition and accessory structures (stairs, handrails, light poles). Our engineering projects include coastal construction projects involving high wind loading, wave loading, flooding, and scour analysis. In the area of forensic engineering, we provide structural engineering failure ...

Richard Coates, PE Gulf Atlantic Engineers, PA

Clearweater, Florida
Civil Engineering, Structural Engineering - Property Damages/Loss Consultant, Moisture Intrusion Cause & Origin, Construction Defects & Delays, Construction Claims Consultant, Flooding Root Cause & Damages, Building Consultant, Pavements & Parking Lots, Real Estate Due Diligence, Stormwater & Drainage Consultant, Storms/Disaster Damages
Licenced Professional Engineer in the following states: Virginia District of Columbus Maryland Florida Georgia Texas North Carolina South Carolina West Virginia Kentucky Tennessee Alabama Mississippi

Rossana Diaz, PE, SI m2e Consulting Engineers

Miami, Florida
Structural Engineering, Failure Analysis
Mrs. Diaz has more than 10 years of experience providing structural engineering design, construction administration, and forensic services to private-sector clients on a wide range of projects. As a forensic engineer, Rossana investigates structural failures, building construction defects, and code compliance on behalf of attorneys, and insurance companies. Rossana’s design portfolio includes development, from conceptual design and plan preparation through construction and final inspection. Her areas of expertise include building castin-place concrete, steel, masonry, and timber design for commercial and residential structures, educational and hospitality facilities, marinas, and industrial plants.

Matthew G. Duckstein, Jr., PE Building Mavens

Palm Beach Gardens, Florida
Structural Engineering, Construction Defects - Building Inspections, UAS (Drone) Inspections, Post-tensioning, Doors and Windows, Building Enclosures & Cladding, Waterproofing, Roofing, Insurance Claims, Wind & Water Damage, Stucco
Mr. Duckstein has over 22 years of experience designing, constructing, and inspecting civil and structural projects. He is a results-oriented consultant with extensive experience in construction defect litigation support and expertise in commercial UAS “drone” operations in central/south Florida. He has a proven track record of providing high-level technical analysis and support for complex projects. His experience includes design and field support for south FL water-control structures and leading movable and fixed bridge inspections on the Ohio, Mississippi, Hudson, and St. Clair rivers.

Scott Harvey-Lewis, PE, LEED AP Building Mavens

Palm Beach Gardens, Florida
Structural Engineering, Construction Defects - Building Inspection, construction, civil engineering, milestone inspections, structural integrity inspections, Building Enclosures, Exterior Walls and Cladding Systems, Waterproofing Systems, Roofing Systems, Water Intrusion Investigations
Mr. Harvey-Lewis has more than 17 years of experience providing structural engineering design, construction administration, and forensic services to public and private-sector clients on various projects. As a forensic engineer, Scott investigates structural failures, building construction defects, and code compliance on behalf of attorneys, owners, developers, and insurance companies. Scott’s design portfolio includes significant phases of project development, from conceptual design and plan preparation through construction and final inspection. His expertise includes building envelope systems, cast-in-place concrete, steel, masonry, and timber design for commercial and residential structures, telecommunication and educational facilities, marinas, industrial plants, warehouses, storage and containment, and land development.

Michael C Head, PE HEAD of Engineering, LLC

Florida
Construction Defects, Structural Engineering - Building Construction, Building Envelope, Building Forensics, Concrete, Construction, Construction Accident, Foundations Building, High-rise Building Construction Analysis, Hurricane Damage, Parking Decks, Personal Injury Building, Structural Steel, Construction Contract Administration
Mr. Head has more than 40 years of structural engineering analysis, design and project/construction management experience throughout Saudi Arabia and the United States ranging from the design of new facilities, strengthening, renovation, retrofitting and repair of existing structures in the GMP, Design/Bid and Design/Bid/Build delivery method and conducting forensic investigations as an Expert Witness. He has been primarily engaged in the design and construction of building structures. During that time he has seen the good and the bad, what works and what doesn't and has seen the design and the construction processes change dramatically. Mr. Head is available to assist attorneys, insurance companies, contractors, architects, engineers, owners, developers and real estate professionals in determining the reasons that the structural systems failed or under-performed, how to efficiently return the facility to fulfill its intended function and the assessment of existing facilities for ...

Miroslav Mladenovic, P.E. M2E Consulting Engineers

Miami, Florida
Engineering - Mechanical Engineering, Electrical Engineering, Structural Engineering, and Forensic Engineering
M2E Consulting Engineers is a full service Mechanical, Electrical, Plumbing, and Structural Engineering Firm located in South Miami, Florida and services the tri-county area. The Firm specializes in design and forensic engineering services, thus our clients benefit from the combination of those two skill sets. Our constant exposure to construction and development problems in our forensics practice allows us to sharpen our design skills on a daily basis, and our design experience completes our problem solving tools in our forensics tasks. The overall benefit comes in the form of a quality, efficient, and effective design. M2E has a track record of successfully completed real estate projects. The Firm also provides real estate owners, developers, contractors, condominium associations, and management companies throughout the country with plan review, construction observations, due diligence inspections and reporting services. The Firm provides design engineering services to the con...

Maureen L Davis, PE, DFE Haight Davis & Associates, Inc.

Davisboro, Georgia
Engineering, Construction - Civil, structural and construction engineering consultant, specializing in the evaluation of construction defects. Provides expert witness testimony for defects, building foundations, roofing systems, drainage concerns, building envelope leaks, structural systems, ADA, trip and fall cases.
Ms. Davis is a Registered Professional Engineer in Georgia and has been practicing engineering since 1993. She provides expert witness testimony for all clients to include both plaintiffs and defendants. Her background includes 17 years with the US Army and extensive, hands-on construction experience. She is a member of the National Academy of Forensic Engineers, American Society of Civil Engineers, Society of American Military Engineers, National Society of Professional Engineers, Georgia Society of Professional Engineers, Institute of Roofing, ASTM International, Order of the Engineer and Chi Epsilon Civil Engineering Honor Society.

Michael C Head, PE HEAD of Engineering, LLC

Atlanta, Georgia
Construction Defects, Structural Engineering - Building Construction, Building Envelope, Building Forensics, Concrete, Construction, Construction Accident, Foundations Building, High-rise Building Construction Analysis, Hurricane Damage, Parking Decks, Personal Injury Building, Structural Steel, Construction Contract Administration
Mr. Head has more than 40 years of structural engineering analysis, design and project/construction management experience throughout Saudi Arabia and the United States ranging from the design of new facilities, strengthening, renovation, retrofitting and repair of existing structures in the GMP, Design/Bid and Design/Bid/Build delivery method and conducting forensic investigations as an Expert Witness. He has been primarily engaged in the design and construction of building structures. During that time he has seen the good and the bad, what works and what doesn't and has seen the design and the construction processes change dramatically. Mr. Head is available to assist attorneys, insurance companies, contractors, architects, engineers, owners, developers and real estate professionals in determining the reasons that the structural systems failed or under-performed, how to efficiently return the facility to fulfill its intended function and the assessment of existing facilities for ...

Timothy J Dickson, PE, SE Dickson-Schaefer, Ltd.

Indianapolis, Indiana
Engineering, Failure Analysis - Structural Engineering, Construction defects, water infiltration, storm damage, fire damage, explosion damage, structural collapse, failure of temporary shoring, construction site accidents, roofing failure, windows, handrail failures, masonry, concrete, steel, failure analysis, façade failure
I strive to perform impartial forensic investigations in an efficient manner to help my Clients assess their issue. I prepare concise written reports that provide a solid understanding of the technical aspects of the issue so my Client can make informed decisions. My expert witness experience includes cases dealing with issues such as defective construction, water infiltration, storm/fire/explosion damage assessment, structural collapse, failure of temporary shoring, construction site accidents, roofing failure, improper design and manfacture of windows and handrail failures.

John M. Kennedy, PE Kennedy Consulting Group, LLC

Indianapolis, Indiana
Structural Engineering, Building Inspection - Parking Structures, Concrete Cracking, Concrete Deterioration, Leak Analysis, Waterproofing, Corrosion Damage, Precast Concrete, Post-Tensioned Concrete, Post-Tensioning Failure, Expansion Joint, Deck Coating, Construction Defects
Mr. Kennedy's practice is focused on condition assessments, damage assessments, repair design, forensic investigations and expert witness consulting related to concrete parking structures, building facades, and other exterior-exposed facilities. Other related areas of expertise include structural strengthening design utilizing CFRP & GFRP, waterproofing design and leak investigations and corrosion control methods such as corrosion inhibitive treatments and cathodic protection. Mr. Kennedy has over 20 years of structural engineering consulting experience and over 15 years of construction management experience, with the majority of that focused on repair and renovation of structures.

William J. Kirkham, P.E., S.E., Ph.D. APT Engineering LLC

Eudora, Kansas
Structural Engineering, Construction Defects - Codes, Concrete Failures, Steel Failures, Masonry Failures, Wood Failures, Corrosion, Seismic Design, Wind Design, Partial/Full Collapse, Prestressed Concrete, Post-tensioned Concrete, Facade performance, Cladding Failures, Vibration, Timber Construction, Timber Decay, Wood Decay, Tall Buildings
As an engineer, I am fascinated by complexity and understanding new and different situations. I love to talk about engineering and explaining engineering processes and principles to young engineers and lay persons is personal passion. Examining a structural failure brings out my inner researcher, and explaining the cause and physics to a jury or arbitration panel channels my teacher personality. I work as a forensic engineer with the intent of helping the legal industry understand engineering principles and to help citizens resolve their disputes justly. Though I have worked as a scientific programmer and chemical engineer, my primary expertise is in structural engineering. I began professional practice at kpff in Portland, OR in 1998. In 2001, I was hired by DCI Engineers. In 2003, I started my own consulting engineering firm which I continue to operate. I have designed concrete, steel, masonry and wood structures, generally commercial, government or schools. About half of my work...

Jeremiah R Cole, PE Cole Engineering Solutions

Cold Spring, Kentucky
Structural Engineering, Geotechnical Engineering - investigative engineering, forensic engineering

John Hlinka, PE, M. ASCE

Benton, Kentucky
Structural Engineering, Civil Engineering - civil, railroad, accident, cranes, failures, foundations, structures, drainage, culverts, washouts, hydrology, concrete pump trucks, corrosion, chemical, industrial, building codes, inspections, construction, OSHA Compliance, swimming pools, structural, tornado, earthquake, railroad, highway, stone
Mr. Hlinka has worked over 40 years in the Engineering, Procurement and Construction Management market with experience in numerous industries: Chemical, Oil Refinery, Pulp & Paper, Adhesives, Nuclear Power Generation, Nuclear Feed Stock, and Steel. His work has overlapped with residential and commercial industries. Throughout his career he has engineered and managed a myriad of projects in these industries and has provided leadership to the various companies in the capacities of: Site Manager, Design Manager, Project Manager, Construction Supervisor, and currently as President. Design engineering, analysis, and inspection experience includes structural steel, reinforced concrete, stone, masonry, wood, and stormwater drainage.

Brian K Bramel, SE, PE, Ph.D. Bramel Engineering

Tracys Landing, Maryland
Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build
Dr. Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder. He is a current member of the New York City Building Code R...

Tara L Pase Bramel Engineering, LLC

Tracys Landing, Maryland
Structural Engineering, Civil Engineering - Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis
Civil/Structural Engineering Construction Defects Building Codes OSHA Failure Analysis Strength of Materials Concrete/Steel/Wood/Masonry Design Concrete/Steel/Wood/Masonry Analysis Seismic Design and Analysis Wind Design and Analysis Foundations and Retaining Structures Grading and Soil Properties Field Repair Designs Stormwater Management Component/Connection Design and Analysis Construction Cost Estimates Building Envelope (Moisture Barriers) Construction Management Registered Professional Engineer, State of New York, License No.087752 Registered Professional Engineer, State of Maryland, License No.42640 Registered Professional Engineer, Commonwealth of Virginia, License No.051210 Registered Professional Engineer, State of New Jersey, License No.24GE05239300

Lamar T. Hawkins, PE, JD PEG, Inc.

Mississippi
Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.
PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Jared Krupa, PE K2 Engineering

Reno, Nevada
Civil Engineering, Structural Engineering - zipline engineering, zip lines, aerial adventure challenge courses, ASTM, structure fire repair design evaluation, NAARSO, ACCT, wood structures, amusement ride inspections, pre manufactured wood trusses, ASTM F2959, IBC wind snow seismic design
Jared A. Krupa is a principal engineer at K2 Engineering and Structural Design, LLC (K2). He holds a Bachelor of Science degree in Civil Engineering from the University of Nevada, Reno, and Professional Engineering licenses in multiple US states. Jared started his structural engineering career in 1999 and has since advanced his profession into more specialized fields such as the amusement ride industry and design/analysis of buildings damaged by fire. Founded in February 2005, K2 is a medium-sized engineering firm located in Reno, Nevada, that focuses on the structural design of commercial buildings, residential homes, and amusement rides and attractions. K2 provides quality engineering services to architects, designers, owners, building contractors and developers with a focus on efficiency and constructability. K2’s staff has over 60 years of experience in the design of projects both large and small in Northern California, Northern Nevada and Lake Tahoe. K2’s expertise and ex...

Zohaib A Alvi, PE za/engineering

Lake Ronkonkoma, New York
Structural Engineering, Building Inspection - Forensic Engineering, Structural Failure, Construction Issues, Special Inspections, Building Evaluation, Building Defects, Trips and Falls, Building Preservation, Building Repair, Retaining Walls, Foundations, Building Codes
Zohaib A. Alvi, PE is a Civil, Structural, and Forensic Engineering Consultant, and Principal of za/engineering. He is a graduate of State University of New York, Farmingdale State College, and holds a dual Bachelors of Science degree in Architectural Technology and Construction Management, along with an Engineering Leadership Certificate from Cornell University, and earned his Master of Engineering from SUNY Buffalo. He is a Licensed Professional Engineer (P.E.) and maintain licensure in New York and multiple other states. He has extensive experience in the evaluation, repair, and rehabilitation of existing structures and historic buildings, verifying construction compliance with applicable building codes and contract specifications, evaluating impact of construction errors, change orders, and damages during construction. He is also highly experienced in forensic investigations evaluations, to determine the cause and origin of structural deficiencies, damage following accidents, w...

Paul J. Angelides, PE Paul J. Angelides, P.E., P.C.

Melville, New York
Engineering, Forensic Science - Forensic Engineering, Building Structures and Systems, Structural Engineering, Mechanical Engineering, Civil Engineering, Foundations, HVAC, Plumbing, Electrical, Construction, Construction Defects, Investigations, Fires, Floods, Insurance, Property Casualty, Disaster Recovery, Premises Liability.
Expert Engineering Staff with Interdisciplinary Experience Client base consists of Insurance Professionals, Building Owners, and Attorneys representing Plaintiff's and Defendants. Retained as Experts in Over 10,000 cases. National Academy of Forensic Engineers Certified Safety Professional Certified Fire and Explosion Investigator National Society of Professional Engineers American Society of Civil Engineers American Society of Mechanical Engineers OSHA and Suspended Scaffold Certifications New York City Special Inspection Agency Licensed in New York, New Jersey, Pennsylvania, Connecticut, Florida, US Virgin Islands Qualified as Experts in State Supreme and Federal Courts FAA Certified Drone Pilot

Brian K Bramel, SE, PE, Ph.D. Bramel Engineering

New York
Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build
Dr. Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder. He is a current member of the New York City Building Code R...

Firas Abdelahad, PE, MS Pittsburgh Design & Engineering Services LLC

Pittsburgh, Pennsylvania
Structural Engineering, Civil Engineering - Personal injuries, slip & fall, Construction Defects, Code review, structural assessments for conservatorship cases, Property condition assessments, Floor collapse, Building envelope assessments & consulting, panels failures, Structural distress, Fire damage structural assessment, Foundation defects
An accomplished and award winning structural engineer and experienced expert witness, I hold a Bachelor of Science degree in Structural Engineering and a Master of Science in Structural Engineering from FAU. As a licensed Professional Engineer (PE) with active licensure in Pennsylvania and several other states, my professional credentials are further reinforced by a current NCEES record. Drawing from a wealth of experience, my expertise lies in the evaluation, repair, and rehabilitation of existing structures. This encompasses a spectrum of tasks, including load-bearing wall removals, addressing floor sags, and managing foundation movements and failures. Additionally, I possess the capability to accurately pinpoint the cause and origin of structural deficiencies and damages resulting from accidents. My proficiency extends to the design, calculations, fabrication, and installation of facade panels, equipping me with the skills needed to assess defects, failures, and damages in both...

Matthew G. Duckstein, Jr., PE Building Mavens

Pennsylvania
Structural Engineering, Construction Defects - Building Inspections, UAS (Drone) Inspections, Post-tensioning, Doors and Windows, Building Enclosures & Cladding, Waterproofing, Roofing, Insurance Claims, Wind & Water Damage, Stucco
Mr. Duckstein has over 22 years of experience designing, constructing, and inspecting civil and structural projects. He is a results-oriented consultant with extensive experience in construction defect litigation support and expertise in commercial UAS “drone” operations in central/south Florida. He has a proven track record of providing high-level technical analysis and support for complex projects. His experience includes design and field support for south FL water-control structures and leading movable and fixed bridge inspections on the Ohio, Mississippi, Hudson, and St. Clair rivers.

John E Poole, P.E. CNX Forensics and Consulting

Philadelphia, Pennsylvania
Civil Engineering, Construction - Americans with Disabilities Act (ADA), Building Codes, Civil Engineering, Construction, Stucco, OSHA Ramp & Stairs, Scheduling Delay & Analysis, Structural Engineering, Waterproofing, Storm water
A construction and engineering expert with over 20 years of construction industry experience as a civil engineer, forensic engineer, CPM scheduler, cost estimator, general contractor, subcontractor, and project management consultant. Strong expertise gained through projects that ranged from $100,000 to over $1 Billion and have included commercial, residential, government, and institutional markets. Mr. Poole has been retained as an expert witness on litigation cases and testified at deposition, arbitration, and trial. He is a licensed Professional Engineer in Pennsylvania, New York, Maryland, and Florida.

Yasser M. Abdelhamid, PhD Bryant Consultants

Carrollton, Texas
Geotechnical Engineering, Construction Defects - Civil Engineering, Expansive Soil, Foundation Analysis and Design, Settlement, Heave, Pavement, Retaining Walls, Slope Stability, Numerical Modeling, Seepage, Drainage, Erosion, Hydrology, Seismic, Earthquake Engineering, Laboratory Testing, Structural Engineering, Construction Defects
Dr. Abdelhamid has been designated as an expert witness for many litigated cases. Dr. Abdelhamid is heavily involved in performing forensic geotechnical and geophysical investigations for several problematic foundations, pavements, retaining walls and slopes. He devises protocols for geotechnical and geophysical testing, in-situ long-term monitoring, lab testing and analysis. He is also heavily involved in preparing and reviewing proposals and expert reports for geotechnical exploration and litigated and non-litigated forensic projects. Dr. Abdelhamid is responsible for meeting clients during the proposal phase, the investigation phase and after releasing the final report to ensure client satisfaction. Dr. Abdelhamid has performed work at wide variety of forensic projects. He evaluated numerous residential buildings from single family house to a whole subdivision. Dr. Abdelhamid also evaluated many commercial, school, hospital, garage buildings. He performed stability analysis for v...

Jay H Daily JHD Product Liability Consulting

ROWLETT, Texas
Products Liability, Manufacturing - Testing, Failure Analysis, Ergonomics, Product Design, Manufacturing, Mechanical Engineering, Premises Liability, Structural Engineering, Warnings and Labels, Slip, Trip & Fall, Metallurgy, Machinery/Equipment
I have 37 years of engineering design experience in multiple industries. I have developed designs for aerospace, consumer products, industrial machinery and products for use in retail environments. Strong manufacturing background and familiarity with all types of manufacturing equipment and processes. These include CNC cutting equipment, roll forming, stamping and progressive dies, Mig, Tig, and high frequency welding, robotics and automated manufacturing processes, assembly, finishing and packaging systems. I have the ability and resources to do physical testing of products, materials, including destructive and non-destructive testing. Strong analytical skills to assess product design and performance empirically and theoretically relative to specific industry standards. I am well versed in safety warnings and labels, and the responsibilities these requirements place on manufacturers of products and equipment.

William F. Ikerd, II, PhD, PE, CM-BIM IKERD Consulting, LLC

Dallas, Texas
Construction, Structural Engineering - Building Information Modeling (BIM), Level Of Development (LOD), Structural Engineering, 3D Modeling, Laser Scanning, LiDAR, scan-to-BIM, Metrology, Failure Analysis, Forensic Engineering, Architecture, MEP, mechanical, construction defects, concrete, steel, wood, timber, masonry, civil engineering.
Mr. Will Ikerd, PhD, P.E. (TX) is principal at IKERD, a firm that specializes in consulting for attorneys, owners, general contractors, trade contractors and designers of buildings, civil, infrastructure, mechanical and manufacturing projects. The firm focuses in the areas of engineering, laser scanning, Virtual Design and Construction (VDC) and Building Information Modeling (BIM). Mr. Ikerd is currently on the board of directors of the BIMForum and chairs three of their Taskforces; BIM Execution Plan (BxP), Reality Capture / Laser scanning and Level Of Development (LOD). He graduated with his bachelor’s in civil engineering and masters in structural engineering in 1998 from Washington University in St. Louis with a focus on 3D parametric modeling and is currently a University of Denver PhD candidate in BIM research.

Amy Patrick, PE Apollo BBC, Inc.

Houston, Texas
Structural Engineering, Civil Engineering - Engineering Design, Consulting Engineering, Structural Analysis, Infrastructure, Concrete, Steel Structures, Engineering, Construction, Grading, Drainage, Steel, Concrete, Foundation, Brick, Building, Structure, Frame, Masonry, Flooding, Flood, Damage, Pool, Leaking, Roof, EIFS, Stucco
Ms. Patrick is a Technical Consultant at Apollo BBC and a licensed professional engineer with over 15 years of experience. Ms. Patrick has a background in structural and civil engineering, including civil site development, structural design, structural forensics, highway and associated structure analysis and evaluation, retaining wall evaluation, flood mitigation and floodproofing, building envelope consulting, and finite element analysis of structural systems. Amy is a licensed professional engineer in Texas and California and has been an adjunct professor at the University of Houston-Downtown's Structural Analysis and Design program since 2013. She is an experienced expert witness in construction defect litigation.

Marcor G. Platt, SE, PE, PMP, PMI-ACP MarcorSEN Engineering

South Jordan, Utah
Structural Engineering, Civil Engineering - Forensic engineering, construction defects, structural failure and retrofits, bridge engineering, fall protection, building codes, project management, fire, water, wind, snow, hurricane, impact, damage analysis, hydrologic and hydraulic flood studies, electrical power line structures
Mr. Marcor Platt is a licensed civil and/or structural engineer (PE/SE) in 21 US states or territories - namely Alabama, Arizona, Arkansas, California, Colorado, Florida, Hawaii, Illinois, Kentucky, Louisiana, Nebraska, Nevada, New Mexico, North Carolina, Oregon, South Carolina, Tennessee, Texas, Utah, the US Virgin Islands, and Washington. He is a Project Management Professional (PMP) and Agile Certified Practitioner (PMI-ACP). He provides expert opinion reports and testimony for structural and civil projects involving both forensic engineering, design engineering, and project management. He has conducted over 600 forensic investigations involving roof failures, wall failures, foundation issues, corrosion, or other forms of damage resulting from rain, hail, wind, snow, tornado, hurricane, earthquake, lightning, fire, volcano, tropical storm, vehicle impact, construction defect, or other natural or man-made events. He has testified at depositions and trials regarding economic feas...

Michael Troy Richardson, MA, BS in Engineering Momentum Engineering, LLC

Washington, Utah
Mechanical Engineering, Structural Engineering - Ziplines & Trampoline Courts: Physics, engineering, industry standards, safety & rescue procedures, state and local regulations, and testing. Over 70 expert engagements and zipline building projects in over 30 U.S. states; Several more in Puerto Rico, Mexico, and Canada; 100% in the last four years.
EXPERIENCE Mr. Richardson is the President of Momentum Engineering, LLC; he's designed and built aerial adventure rides, and devices since 1988. He is working on a Master's degree at Utah TECH University. Bachelor of Science in Engineering and 30+ semester hours of Physics. Building ziplines for 20+ years, where he has designed, evaluated, and patented multiple safety elements and devices. In 2000, Park City Mountain Resort Zipline designed, testing, prototypes, and Patents for passive braking trolleys, a series of springs as the emergency arrest device, and built the towers for a 4000+ foot long zipline. In 2009 he built and designed his commercial zipline in Spanish Fork, Utah. He has three U.S. Patents for zip line safety trolleys and springs with at least one pending. He is on two advisory and voting committees with the American Society for Testing and Materials (ASTM). ASTM F24' Adventure Rides' & ASTM F15' Consumer Products,' and an F2959 Task-group member of F24.61 Aerial Adv...

Mohamed E. Hassan, PhD, PE Hassan Consulting Group, LLC

Gainesville, Virginia
Construction, Construction Defects - Engineering Design, Building Codes, construction management, structural engineering, infrastructure engineering, reinforced concrete, steel structures, bridges, Structure engineer, foundations, piers, abutments, and soil analysis.
- 45 years construction design and management of commercial and residential projects. - 15 years Construction Expert Witness - 10 years of teaching experience in George Mason University, DeVry University and NVCC - 15 years of mediation and conflict resolution Mohamed Hassan, PhD, PE has 45 years of diversified experience in the construction industry for commercial and residential projects. He is the principal of Hassan Consulting Group, LLC specializing in designing and building a variety of projects. He was an adjunct professor at George Mason University, DeVry University, and Northern Virginia Community College. LICENSES: He is a licensed professional engineer in the states of Virginia and Texas. He is also licensed contractor in the state of Virginia and District of Colombia (Washington DC). He is certified by the Supreme Court of Virginia as a Mediator. He is admitted in Virginia, West Virginia and Washington DC Court Systems. CONSTRUCTION EXPERT: Experienced in const...

Tara L Pase Bramel Engineering, LLC

Virginia
Structural Engineering, Civil Engineering - Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis
Civil/Structural Engineering Construction Defects Building Codes OSHA Failure Analysis Strength of Materials Concrete/Steel/Wood/Masonry Design Concrete/Steel/Wood/Masonry Analysis Seismic Design and Analysis Wind Design and Analysis Foundations and Retaining Structures Grading and Soil Properties Field Repair Designs Stormwater Management Component/Connection Design and Analysis Construction Cost Estimates Building Envelope (Moisture Barriers) Construction Management Registered Professional Engineer, State of New York, License No.087752 Registered Professional Engineer, State of Maryland, License No.42640 Registered Professional Engineer, Commonwealth of Virginia, License No.051210 Registered Professional Engineer, State of New Jersey, License No.24GE05239300

Scott Phelan, Ph.D, P.E., P.Eng., S.E. Caprock Engineering, PLLC

Greater Seattle Area, Washington
Structural Engineering, Civil Engineering - Highway Bridge Design, Transit Guideway Design, Structural Bridge Design, Concrete Segmental Bridge Design, Design-Build, Value Engineering
I serve as President and Chief Technical Specialist for Caprock Engineering, PLLC, and as a Principal Engineer with Systra-IBT. I have over thirty years of experience in structural bridge design. My LinkedIn profile is at https://www.linkedin.com/in/scottphelan-caprock. I serve on the international American Society of Civil Engineers (ASCE) Transportation & Development Institute (T&DI) Economics & Finance Committee, the national Precast/Prestressed Concrete Institute (PCI) Bridges Committee, and the regional American Council of Engineering Companies/ Washington Department of Transportation (ACEC/WSDOT) Structures & Geotech Subcommittee. I recently was inducted as an ASCE Fellow. I have participated in the design and construction of numerous concrete segmental bridge projects, including the final design of two world-record bridges and the construction of the first precast concrete segmental bridges in the State of Washington. I recently served as Co-Chair of the Seattle DOT Technica...
You can also find Structural Engineering Expert Witnesses in:
Pennsylvania, New York, Florida, Maryland, Kentucky, Georgia, Texas, California, Indiana, Kansas , Nevada, Washington, and Utah