Products Liability Expert Witnesses in California

Accident Reconstruction, Safety - Vehicle collisions, Premises liability including slip/trip & fall, Safety, Code Compliance, Construction & Industrial Accidents, Failure Analysis, Human Factors, Biomechanics, Mechanical Engineering, OSHA, ADA compliance, Products Liability, Criminal, Licensed Safety Engineer by State of California

Vehicular:
 all vehicle types, multi-vehicle, bicycles, pedestrians, skidmark analysis. damage-matching, occupant biomechanics. visibility & line-of-sight analysis, traffic signal phasing, vehicular component defects, seatbelts. Premises Liability: Code Compliance, Slip, trip, floor friction testing, stairway & ramp accidents, glass injuries, guardrails; illumination issues; manual & electronic gates, ladders, door closing mechanisms, falling objects, structural failures. Occupancies include single- and multi-family residences, retail stores, office buildings, garages, sidewalks, parks and other public access. Industrial & Construction accidents: Walking-working surfaces including ramps, hoisting & conveying, powered lifts, work platforms, forklifts, construction vehicles, materials handling & storage, machine guarding, ladders, scaffolding, trenching & shoring, Cal-OSHA compliance, lockout/tagout, IIPP analysis, human factors & ergonomics issues. Products Liability: Liabili...

Human Factors, Automotive - Motor Vehicle Accidents, Distracted Driving, Products Liability, Pedestrian/Cyclist Accidents, General Aviation Accidents, Workplace Safety, Scooters, Reaction Time, Risk Perception, Warnings, Driver Behavior, Slip/Trip/Fall

Dr. Steve Casner is a former career NASA human factors psychologist. Steve draws on a wide body of scientific research to help characterize the understandings, perceptions, and abilities of a reasonably prudent person. Steve is able to help identify the contributions of persons, places, circumstances, and things in a variety of accident situations. Steve is an experienced driver, motorcyclist, bicyclist, and airplane and helicopter pilot and flight instructor. Steve’s first book entitled Careful was published by Penguin Random House in 2017 and reviewed in the Wall Street Journal, The New Yorker, and many others. An experienced writer and speaker, Steve is able to relate scientific ideas to everyday audiences.

Industrial Hygiene, Products Liability - Exposure, Legionnaires, Asbestos, Occupational Disease, Infection Control, COVID, Indoor Air Quality, Mold, Respirators, Carbon Monoxide, Chemical Product Liability, Pesticides

Adjunct Professor - Occupational & Environmental Health, School of Public Health, University of Toronto Member, American College of Epidemiology Member, Association for Professionals in Infection Control and Epidemiology Certified Industrial Hygienist (American Board of Industrial Hygiene) Registered Occupational Hygienist (Canadian Registration Board of Occupational Hygienists) Licensed Pesticide Applicator Licensed Asbestos Project Supervisor

Human Factors, Warnings & Labels - Products Liability, Slip Trip, and Fall, Vehicle Accidents, Auto Accidents, Perception/Reaction Analysis, Driver Behavior, Distracted Driving, Motorcycle Accidents, Pedestrian/Bicycle Accidents, Night Vision and Lighting, Retail Safety, Workplace Safety

Expert in human factors and ergonomics with extensive experience testifying in motor vehicle accidents; product liability; and slip, trip, fall cases in state and federal courts. Retained by both plaintiff and defense attorneys. Specializes in forensic personal injury causation involving premises, product, vehicle, pedestrian, and workplace accidents. Human factors/ergonomics specialties include: Driver perception & behavior; Pedestrian perception & behavior; Perception response time; Night vision; Lighting, visibility & conspicuity; Slip, trip, misstep & fall (including falls from heights such as ladders & platforms); Product design & liability (including medical, consumer, industrial, agricultural); Human-machine interaction; Control/display layout; Warnings, signs & instructions. PhD in Experimental Psychology, Certified Professional Ergonomist, Certified XL Tribometrist, and OSHA authorized to teach 10 and 30 hr. courses in General Industry Safety. Designed and conducted human f...

Products Liability, Transportation - packaging, freight, load securement, pallets, boxes, packaging machines, cargo transportation, industrial injury, industrial safety, packaging design, packaging testing, corrugated, intellectual property, business ethics

Randy Phares is an expert in packaging, distribution, transportation and manufacturing, especially corrugated and folding carton packaging. He is also an expert on pallets, crating, warehousing and transporting products by semi-truck. He does forensic analysis of packaging failures that caused damage or injury. He has bought, sold operated, supervised, removed and installed packaging machinery. He has managed many warehouses and a fleet of trucks. He has run a packaging testing lab and held almost every job in a packaging operation over his 30+ year career. He has completed Expert Reports on packaging failure, load securement, freight transportation, intellectual property, crating, packaging design, Lean Manufacturing, intellectual property and pallets. He has given Depositions, testified at Trial and consulted with attorneys in a variety of cases. He is an esteemed consultant in the packaging field and has done consulting projects all over the world. He was a Regional Safety Champi...

Supply Chain, Products Liability - Business Operations, Personal Injury, Purchasing, Manufacturing, Product Safety, Product Liability, Product Design, Quality Control, Distribution, Logistics, Safety Testing, Product Recall, Procurement, Safety Testing, Packaging, Operations, Labeling, Industry Standards, Best Practices

Dr. Zal Phiroz is a supply chain professor, and expert on manufacturing vulnerabilities causing personal injury, product liability, product recall, product defect, quality control, packaging and distribution. As a practitioner, Dr. Phiroz has held senior supply chain roles at Proctor & Gamble (NYSE:PG). As an academic, he has held faculty appointments at Harvard University, USC, MSU, and is a regularly invited keynote speaker on Supply Chain topics. In addition to holding a PhD in Supply Chain Management, Dr. Phiroz is a Harvard fellow, and currently a member of faculty at Rady School of Business, University of California, San Diego. The following are some examples of areas Dr. Phiroz has opined on: - Injury due to manufacturing design, inefficient storage, product testing, and quality assurance. - Industry standards for inventory transportation, storage, packaging, labeling, and quality testing. - Consumer demand and behavior analysis. - Supply chain design and funct...

Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle,Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe, HVAC, CPVC, Oil & Gas, Welding

Joseph Quinn, MS, PE, is a Forensic Metallurgy and Metallurgical Engineering consultant. He is a Licensed Professional Engineer in Metallurgical Engineering and is registered in 7 states (CA, PA, UT, NV, AZ, CO, WA). He has provided over 1,000 Failure Analysis investigations on metallic and non-metallic (glass, plastic, rubber, and composite) materials or products. Mr. Quinn provides metallurgical and materials consultation, expert witness testimony, and forensic failure analysis for civil litigation with retentions by defendants and plaintiffs. He has received awards in the International Metallographic Contest and has conducted several presentations on metallurgical engineering and failure analysis subjects at universities, ASM meetings, and industry events. He is President of the National Society of Professional Engineers in California (NSPE-CA) and is active in several technical societies. He has taught metallurgical engineering course topics in Principals and Applications of ...

Products Liability, Manufacturing - Fitness, Fitness Equipment, Gym, Treadmill, Bicycle, Group Cycle, Spinning, Strength Training, Weight Training, Product Quality, Asia Manufacturing, Human Factors, FMEA, DFMA, Design for Serviceability

Over 20 years in the bicycle and fitness equipment industries bringing to the table a well-rounded professional perspective. From Mechanical Engineer designing products to head of Product Development & Quality ensuring manufacturing process and sourcing excellence, my expertise covers a wide spectrum of technical disciplines. With experience in technical field service training and being an avid user of bicycle and fitness equipment, I can also relate well with the plaintiff’s side of a product liabilities claim. I have provided testimony and sat as the most knowledgeable defense party on over 35 depositions and mediations in 6 litigations in the states of California, New York, and Florida as well as well as internationally in Hong Kong. During college and after graduation, I was employed as a Mechanical Designer then Mechanical Engineer in the bike industry for Profile Design & Primo Products. I later transitioned into the fitness industry in 2005 as a Senior Mechanical Enginee...

Products Liability, Mechanical Engineering - Accident Reconstruction, Failure Analysis, FMEA, Material Characterization and Testing, Material Properties, Metallurgy, Manufacturing, Aviation & Aerospace, 3D printing, Automotive, Slip Trip & Fall, Warnings & Labels, Oil and Gas, Product Development, Laboratories & Testing

Mingxi is a Licensed Professional Mechanical Engineer in the state of California with expertise in materials development and mechanical engineering across a broad range of industries. With a specialty in metallurgy, fracture mechanics and failure analysis, she has experience in materials testing and process development in the aerospace and manufacturing industries, Prior to joining Berkeley Engineering And Research, Inc., she held engineering roles at SpaceX, Virgin Orbit, and Carbon 3D, where she worked on integrating Mil, ASTM, ISO, and NASA specifications into the product development process during transitions from R&D to production. In addition to knowledge of traditional materials and processing methods, she has developed characterization methods for additive manufacturing of metallic and polymeric materials. Her skills take a big picture approach, centering on the intersection of materials science and mechanical design, among other fields. Projects have included reusability...