Construction Expert Witnesses in Michigan

Construction Defects, Construction - Residential, commercial, leaks, tenant fit-outs, kitchens, baths, remodels, construction related slip-fall & personal injury, historic buildings, restaurants, roofs, siding, critical path, luxury construction, high-end construction, wine cellars, cabinetry, Schluter Systems, tile, stone, masonry

Award-Winning construction professional. 45 years of hands-on experience. Founder/operator of two highly-successful construction firms. Experience includes all aspects of residential and high-end residential construction, new builds and remodeling, light commercial construction and tenant build-out - multiple new builds, over 60 whole home remodels, over 500 kitchen remodels, approximately 400 master bath remodels, numerous tenant fit out projects, restaurants, and a historic landmark complete renovation. Extensive consulting experience as an Owner's Representative. Patented inventor of a cabinet installation assembly. Author of the book Residential Building & Remodeling, On Amazon https://www.amazon.com/dp/B0CJ7GMDJM. I work to stay current on construction processes, materials, technique's, industry changes and codes through construction of investment properties. Areas of expertise include, but are not limited to: • Construction Defects • Personal Injury resulting from Cons...

Construction, Construction Defects - Engineering Design, Building Codes, construction management, structural engineering, infrastructure engineering, reinforced concrete, steel structures, bridges, Structure engineer, foundations, piers, abutments, and soil analysis.

- 45 years construction design and management of commercial and residential projects. - 15 years Construction Expert Witness - 10 years of teaching experience in George Mason University, DeVry University and NVCC - 15 years of mediation and conflict resolution Mohamed Hassan, PhD, PE has 45 years of diversified experience in the construction industry for commercial and residential projects. He is the principal of Hassan Consulting Group, LLC specializing in designing and building a variety of projects. He was an adjunct professor at George Mason University, DeVry University, and Northern Virginia Community College. LICENSES: He is a licensed professional engineer in the states of Virginia and Texas. He is also licensed contractor in the state of Virginia and District of Colombia (Washington DC). He is certified by the Supreme Court of Virginia as a Mediator. He is admitted in Virginia, West Virginia and Washington DC Court Systems. CONSTRUCTION EXPERT: Experienced in const...

Construction, Premises Liability - Defects, personal injury, insurance, codes, commercial, residential, accidents, falls, asbestos, ADA, sewer, water, liability, damages, general contractor, fire, flood, contracts, subcontractors, engineer

Highly experienced construction and premises expert. Specializes in large commercial and multi-residential construction disputes and serious bodily injury claims. Has served on over 300 cases as an expert witness and dozens of cases as an arbitrator. 30+ years’ experience as a general contractor and owner/developer focusing on condominiums, roads, sewers, subdivisions, offices and other major construction. Summa Cum Laude/Phi Beta Kappa graduate of the University of North Carolina. Consultant (2008-Present): Georgia, North Carolina, Florida, Alabama, Mississippi, and Tennessee. Cases include commercial defects and delays, serious personal injuries, multifamily, sewers, roads and drainage, retail, insurance, professional liability, and construction business practices. Approximately equal representation of plaintiffs and defendants. General Contractor - President of Buckhead Classic (2006 – presen): Projects include defective construction repair, new construction, fire and flood...

OSHA, Construction - Construction Safety, OSHA, Subsurface Utility Engineering (SUE), Underground Utilities, Damage Prevention, call before you dig, Multi-Employer worksite, General Duty Clause, OSHA 1926, Construction Safety Culture, One Call center

With more than 20 years of experience in the construction industry, as a practitioner and a professor, I have also had the privilege of speaking at conferences and authoring articles in respected national and international peer-reviewed journals. My work has been cited more than 700 times as of June 2023. My expertise lies in two areas: • Construction worker safety, specifically in multi-employer worksites & ANSI/ASSP A10.33-2020, OSHA 1926 regulations, the general duty clause, Manual on Uniform Traffic Control Devices (MUTCD) Part 6 (temporary traffic control), the Hispanic construction workforce, Duty of Care, Common Work Area Doctrine, excavation safety, construction Safety culture, and Retained Control Doctrine. • Sub-surface utility management, where my focus is on damage prevention laws, the investigation process for utility strikes or damages, and Subsurface Utility Engineering (SUE). In 2021, I published a book in collaboration with Mr. Louis Panzer, the director of North...

Building Inspection, Construction - Premises Liability, Property Litigation,Negligence Actions, Building Code, Wrongful Death,Residential & Commercial Structures,Fire,Electrical,Mechanical, Plumbing,Zoning,Slip & Fall,Workmanship,Water Testing,Building Inspection, Maintenance, Safety,Code Research, Cost Estimating

Tens of Thousands of Building Inspections performed. Certified Building Inspector, I.C.B.O - International Code Council Registered Building Inspector, State of MI Registered Building Official, State of Michigan Registered Plan Reviewer, State of MI 2009 International Accreditation Service, International Code Council, Lead Evaluator Training 1998 Professional Development Committee, International Conference of Building Officials 1987 Rehabilitation Construction Specialist, National Association of Housing and Redevelopment Officials 1983 Licensed Residential Builder, State of MI 2010 International Accreditation Service, International Code Council, Building Department Evaluator, Construction Practices Assessment Team, Abu Dhabi, United Arab Emirates 2009 Faculty, Michigan State Univ., School of Planning, Design and Construction, Construction Management Program, Adjunct Instructor, Commercial, Fire and Residential Building Codes 1984 President, Professional Inspection Consultant...

Civil Engineering, Environmental Engineering - Groundwater, Wastewater, Remediation, Bioremediation, Modeling, Stormwater, Hydrogeology, Hydrology, Geotechnical, Microbiology, Contamination, Geochemistry, Construction, Demolition, Home Inspection

Dr. TImothy Mayotte is President and CEO of Mayotte Design & Engineering, PC, a civil and environmental engineering design firm based in East Lansing, Michigan. Since 2003, MD&E has proved itself a highly responsive design, advocate and risk management partner for clients in the energy, automotive, commercial printing, textile, pharmaceutical, chemical, real estate, and legal industries. MD&E offers a variety of services, specializing in the design and engineering of treatment solutions for wastewater, groundwater, stormwater and contaminated soil, sediment and air. Dr. Mayotte has assisted clientele across globe, having completed projects in: Alabama; Arizona; California; Colorado; Connecticut; Illinois; Indiana; Iowa; Kansas, Massachusetts; Michigan; Missouri, Mississippi; Nevada; New Jersey; New York; Ohio; Oregon; Tennessee; Texas; Vermont; Virginia; West Virginia; Washington, Wisconsin; Wyoming; British Columbia; Ontario; Quebec; Brazil; China; Czech Republic; Italy; and Mex...

Safety, Agriculture Engineering - Accidents, Auto ADAS, Agriculture, Battery Fires, Cannabis Processing, Chemical Exposure, Child Safety, Construction, Electrocution, Ergonomics, Fitness Equip, Fires/Explosions, HazCom, Human Factors, HVAC, Mechatronics/Nano, Medical Devices, OSHA, Recalls, RV/ATV, Slip/Fall, Vapes, Warnings/Label

There are four PhD and registered Professional Engineers at Miller Engineering who are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. These co-founders and associates are James M. Miller, PE, PhD; Mark R. Lehto, PhD; David R. Clark, PE, PhD; Adam M. Olshove, PE, MSE; and Jeffrey D. Rupp, MSE. Miller Engineering has a dedicated office with a full-time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise includes the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. Miller Engineering’s principle engineers wrote the original books on warnings and instructions, have published in several other areas, have participated in product designs and patents, and have analyzed, reconstructed and/or animated numerou...

Building Inspection, Construction - Construction Defects, Demolition, Failure Analysis, OSHA, Plumbing, Premises Liability, Products Liability, Safety, Slip, Trip & Fall

Safety, OSHA - Multiple industry safety experience, OSHA, safety & health, serious injury and fatal injury prevention, occupational fatalities, falls, machine guarding, ladder, multi-employer worksite, construction, training, silica, industrial hygiene, respiratory protection, safety management systems, auditing

38 years of occupational safety, health (including industrial hygiene), and environmental management experience within several industries. This includes roles as an Air Force Bioenvironmental Engineering officer (final rank of Captain, with industrial hygiene and environmental responsibilities), regional Occupational Health and Safety (OHS) management for a hazardous waste cleanup company, OHS management for a Prime Contractor to the Department of Energy (Oak Ridge, TN), construction safety and construction fatality research for the University of Tennessee under contract to the Department of Labor/Occupational Safety and Health Administration (OSHA), OHS management for a consumable dental supplies and metals related manufacturing/machining company, OHS management for an international gas engine manufacturer within a global automotive manufacturer, regional environmental, health and safety (EHS) management and global safety team member for a Tier 1 auto parts manufacturer, regulatory...