Failure Analysis Expert Witnesses in Texas

Failure Analysis, Engineering - Fire, Engineering Mechanical, Engineering Electrical, Building Inspection, Construction, Electricity, Electronics, Laboratories & Testing, Investigation, Products Liability, Plumbing, Forensic Science

Dr. Durham has been providing forensic and failure analysis services to clients for over 20 years. He has testified as an expert witness in multiple states, in federal jurisdictions, before FERC and state utility commissions. He is a certified fire and explosion investigator. He has been involved in over 2,500 failure analysis projects including: power systems, lightning, electrocutions, oil & gas, tank batteries, industrial, commercial, residential, lighting appliances, utility systems, utility regulation, fire, equipment damage, switchgear, construction equipment, electronics, overhead lines, underground lines and fire protection equipment. Licensed PE in 11 States; BS EE, ME, PhD

Mechanical Engineering, Failure Analysis - Mechanical Engineering, Materials, Failure Analyis, Forensic Engineering, Manufacturing, Design, Warnings - Marketing Defect, Oil & Gas, Metallurgy, Stress, Root Cause, Safety Hierarchy Application, Laboratory Analysis, Inspection, Firearms, Electronics, Field Investigations, Fracture Surface

Dr. Scott Anson has been practicing and teaching engineering for over 28 years. The first 8 years were in industry engineering roles involving process development and tooling design, as well as extensive laboratory failure analysis. During his over 20+yr. academic career he has held multiple industry appointments simultaneous with his academic role, in addition to his independent consulting work. He provides forensic engineering services involving product design, manufacturing defects, and warnings/instructions (marketing defects). He is a licensed professional engineer (P.E.) in Texas and has an active NCEES record to facilitate licensing in other states. Dr. Anson has complementary skills in four key dualities that uniquely enhance his effectiveness in forensic engineering and expert witness services. 1) He is formally trained and experienced in both Mechanical Engineering and Materials Engineering, which enables him to assess both mechanical overstress and materials degrad...

Products Liability, Manufacturing - Testing, Failure Analysis, Ergonomics, Product Design, Manufacturing, Mechanical Engineering, Premises Liability, Structural Engineering, Warnings and Labels, Slip, Trip & Fall, Metallurgy, Machinery/Equipment

I have 37 years of engineering design experience in multiple industries. I have developed designs for aerospace, consumer products, industrial machinery and products for use in retail environments. Strong manufacturing background and familiarity with all types of manufacturing equipment and processes. These include CNC cutting equipment, roll forming, stamping and progressive dies, Mig, Tig, and high frequency welding, robotics and automated manufacturing processes, assembly, finishing and packaging systems. I have the ability and resources to do physical testing of products, materials, including destructive and non-destructive testing. Strong analytical skills to assess product design and performance empirically and theoretically relative to specific industry standards. I am well versed in safety warnings and labels, and the responsibilities these requirements place on manufacturers of products and equipment.

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

Dr. Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr. Gottuk is a recognized expert in fire detection, fire dynamics and fo...

Construction, Structural Engineering - Building Information Modeling (BIM), Level Of Development (LOD), Structural Engineering, 3D Modeling, Laser Scanning, LiDAR, scan-to-BIM, Metrology, Failure Analysis, Forensic Engineering, Architecture, MEP, mechanical, construction defects, concrete, steel, wood, timber, masonry, civil engineering.

Mr. Will Ikerd, PhD, P.E. (TX) is principal at IKERD, a firm that specializes in consulting for attorneys, owners, general contractors, trade contractors and designers of buildings, civil, infrastructure, mechanical and manufacturing projects. The firm focuses in the areas of engineering, laser scanning, Virtual Design and Construction (VDC) and Building Information Modeling (BIM). Mr. Ikerd is currently on the board of directors of the BIMForum and chairs three of their Taskforces; BIM Execution Plan (BxP), Reality Capture / Laser scanning and Level Of Development (LOD). He graduated with his bachelor’s in civil engineering and masters in structural engineering in 1998 from Washington University in St. Louis with a focus on 3D parametric modeling and is currently a University of Denver PhD candidate in BIM research.

Mechanical Engineering, Products Liability - Patent infringement & invalidity, products liability, machinery design, failure analysis, design defects & manufacturing defects, 15 US patents + 6 foreign patents, Oilfield, industrial & agricultural accidents, pumps & compressors, valves & piping, consumer products, mechanical equipment failures

Dr. King is a licensed professional engineer with a Ph.D‭. ‬in mechanical engineering‭: 40+ ‬years experience in mechanical engineering‭, ‬product design‭, research and development of high-pressure oilfield fracturing pumps and automotive components, forensic investigation‭, ‬and litigation support‭. ▪ Testified at 11 trials & 54 depositions ▪ 25 Patent, IPR, & PGR cases – 4 trials & 12 depositions ▪ 21 Patents ▪ Patent infringement & invalidity ▪ Products liability ▪ Design defects & manufacturing defects ▪ Failure analysis ▪ Oilfield, Industrial, Construction, & Agricultural accidents ▪ Pumps, valves, compressors, & piping ▪ Cranes, trucks, lifts ▪ Consumer products Dr. King has served as a forensic engineer for over 20 years, testifying at 11 trials and 54 depositions in state and federal courts for both plaintiff and defense. Dr. King has served on 25 patent cases, providing opinions on invalidity, infringement, IPR’s, PGR's, and claim construction, including l...

Chemical Engineering, Chemistry & Chemicals - Intellectual Property, Patent Analysis, Patent Infringement, Patent-Litigation Support, Patents, Petrochemicals, Specialty & Fine Chemicals, Plastics, Oil & Gas, Coal/Synfuels, Rubber, R&D, Laboratories & Testing, Environmental, Toxic Chemicals, Failure Analysis, Forensic Science

Fellow AIChE ● ACS ● ASME 45+ Years Experience ● MIT Trained ● 8 Patents Broad R&D and corporate experience at Exxon, GE, Halcon SD. Executive service in synfuels development at the U.S. Dept. of Energy. 18 years owning and managing a private R&D chemical process development laboratory.

Mechanical Engineering, Metallurgy - Product Liability, Failure Analysis, HVAC, Oilfield, Heavy Equipment, Cranes, Cables, Medical Devices, Plastics, Boilers, Water Heaters, Plumbing

Using his combination of mechanical and metallurgical (including plastics) experience and education, Mr. Plank provides forensic and consulting engineering services to attorneys, insurance professionals, and manufacturing companies. A registered engineer in Texas and 23 other states, his experience includes 32 years in manufacturing in the metals processing industries, 29 years performing failure analyses, and 26 years investigating claims. Mr. Plank has testified in a wide variety of matters including personal injury and property damage, in both state and federal court, and his testimony has never been excluded. Assignments have involved mechanical equipment, appliances, oil and gas transmission equipment, plumbing, HVAC, heavy equipment, machine tools, cranes and wire cables, manufacturing processes, and thermal processes, among many others.

Engineering, Metallurgy - Failure Analysis, Accident Reconstruction, Slip, Trip & Fall, Products Liability, Human Factors, Intellectual Property, Forensic Science, Fire, Equipment & Machinery, Electricity, Biomechanics, Premises Liability

Jahan Rasty, PhD, PE, MBA is a tenured full professor of Mechanical Engineering at Texas Tech University (since 1988) where he also serves as the Director of newly established post-graduate Forensic Engineering Certificate Program, as well as the director of Materials Performance Characterization and Failure Analysis Laboratory. Dr. Rasty is also the founding president of Real-World Forensic Engineering, LLC, which is a boutique-style engineering consulting firm. He is an experienced engineering expert and has successfully testified in more than 250 cases and has conducted over 1,000 engineering investigations in the areas of consumer products and industrial machinery failures involving design, manufacturing and marketing defect issues. Professor Rasty is a licensed professional engineer in the state of Texas, and holds various forensic certifications in the fields of fire and explosion investigation (CFEI, CFII), as well as vehicle Crash Data Retrieval (CDR). He received his BS,...

Mechanical Engineering, Forensic Science - Electrical Engineering, Energy, Equipment & Machinery, Failure Analysis, Fire, Laboratories & Testing, Oil and Gas, Products Liability, Product, Plumbing, Leak, Warnings & Labels, Guarding, CSST, Gas Explosions, Natural Gas, Propane, LPG, Forensic Engineering, Expert Witness

LICENSURE: -Texas Professional Engineer License #57023 -Colorado Professional Engineer License #24555 -Mississippi Professional Engineer License #17888 -Alabama Professional Engineer License #35693 -North Carolina Professional Engineer License #049314 -South Carolina Professional Engineer License #37169 -Virginia Professional Engineer License #0402061315 -Michigan Professional Engineer License #6201069726 -Minnesota Professional Engineer License #58020 EDUCATION: -BSME, University of Texas at Arlington, 1978 AFFILIATIONS: -MEMBER, American Society of Mechanical Engineers (ASME) -SENIOR MEMBER, National Academy of Forensic Engineers (NAFE) -MEMBER, National Council of Examiners for Engineering and Surveying (NCEES) -MEMBER, National Society of Professional Engineers (NSPE) -MEMBER, Texas Society of Professional Engineers (TSPE) -Pi Tau Sigma -Tau Beta Pi PRIMARY AREAS OF EXPERTISE: -Fire and Explosion Analysis Fuel Gas Fires and Explosions Residential, Commercial, Ind...

Transportation, Safety - Safety & Compliance Consultants provides Litigation Support, Accident Investigations, DOT Audits, DOT Inspections, DOT/FMCSR Regulations, Freight Broker & HazMat Regulations for collisions involving Commercial Motor Vehicles/Fleet Vehicles. Failure Analysis, Biomechanical, Accident reconstruction

Over 30 years of experience in transportation, safety, compliance and logistics. Contact Billy for updated CV.