Design Defects Expert Witnesses

Design defects expert witnesses and consultants listed here may be able to form expert opinions, draft expert witness reports, provide expert witness testimony at deposition and/or trial as or serve as consulting (non-testifying) experts on design defects. The design defects expert witness listings on this page are typically from fields/areas of expertise such as: Accident Reconstruction, Architecture, Bicycles, Construction Defects, Engineering, Failure Analysis, Mechanical Engineering, Metallurgy, Products Liability, Safety, and Slip Trip & Fall.

View Full Profile

Gary L. Jackson, P.E., CSP, CFEI

Engineering, Safety & Fire - Expert Investigations

System Engineering And Laboratories Corporation (SEAL Corp)

Louisiana
Engineering, Safety - Fire Origin and Cause, Equipment Tractors Cranes, Structural, Explosion, Construction Safety, Accident, Marine, Premises, Design Defects, Manufacturing Defects, Watercraft, Plumbing, Failure Analysis, Construction Defects, Causation, Forensic, Slip Trip & Fall, ATV/UTV, Material, Mechanical
Mr. Jackson has 27+ years' experience as an Engineer with a Bachelor of Science in Mechanical Engineering from Texas A & M University graduating in 1984. Mr. Jackson has testified as an expert witness over 100 times in his career. Mr. Jackson is a licensed Professional Engineer in the states of Texas and Louisiana. he also holds national certifications in safety as a CSP - Certified Safety Professional, CFEI - Certified Fire & Explosion Investigator, Certified Drone Pilot, and state licenses as a Private Investigator, Certified Security Officer, Personal Protection Officer - Texas Private Security. Mr. Jackson is currently a member of the National Association of Fire Investigators and has previously been a member of NSPE, SAE, NFPA, and previously a certified firefighter, certified scuba diver, among other pursuits. Mr. Jackson has testified on a wide variety of subjects for both plaintiff and defense matters. His early professional experience began with NASA/JSC as a support...
View Full Profile

Michael S Teller, AIA, NCARB, LEED AP, MCPPO

MST Consulting

Boston, Massachusetts
Architecture, Construction Defects - Design defects, Standard of Care, Roofing, Massachusetts Public Bidding, Historic Restoration, Architecture, Leaks, Windows, Contracts, Historic, Architectural Design, Waterproofing, Concrete, Ice Dams, Sealants and Caulking, Construction Defects, Masonry, Chapter 149, Wrought Iron, Wood Trim
Having lived it from the inside, I assist Attorneys and Owners in assessing the merits of architectural and construction cases. I also help architects and contractors defend matters based on my 46 years of experience understanding the design and building process, the technical issues, as well as the roles of each party. As a Registered Architect (MA, RI, NY) and Building Envelope Consultant, I focus on architectural standard of care issues and construction defects associated with leaks, roofing, windows, masonry, concrete, ice dams, sealants and caulking, wood trim and wrought iron. I specialize in Massachusetts Chapter 149 bidding issues and disputes associated with the renovation of existing and historic buildings as well as new construction.
View Full Profile

Thomas W. Caldwell, PE

Summit Associates of Bedford, LLC

Nashua, New Hampshire
Metallurgy, Failure Analysis - Design Defects, Material Selection, Engineering, Manufacturing Defects, Manufacturing, Quality Control, Mechanical Failure, Corrosion, Fitness for Use, Equipment Operation, Equipment Maintenance, Trade Secrets
Testifying and consulting expert for both plaintiff and defense counsel. Cases have involved hand tools, recreational and exercise equipment, fire fighting apparatus, rotating machinery, construction hardware, fasteners, joints, piping, tubing, lighting fixtures. 40+ yrs designing, manufacturing and quality assurance of components for consumer & industrial products including safety and performance-critical applications for aircraft, automotive safety systems, medical products, construction machinery, defense arms and munitions. Mr. Caldwell has testified in patent infringement and trade secret misappropriation cases. He has lectured in the USA, Europe and India on manufacturing premium quality metal products. He has published in the areas of batteries, materials selection and materials processing. Licensed Professional Engineer, Ohio. US Patent holder.
View Full Profile

David Del Vecchio, AIA, CID, RCS, NCARB, LEEDap

Design and Construction Expert Witness

David Del Vecchio, Architect, LLC

Cranford, New Jersey
Architecture, Construction Defects - ADA, OSHA, Contracts, Tenant / Landlord, Construction Administration, Interior Design, AIA Contract Documents, Design Defects, Standard of Care, Affidavit of Merit, Architectural Copyright / Intellectual Property, Residential Design, Commercial / Retail Design, Change Orders, Building Envelope, Consumer Fraud Act
David Del Vecchio has over 34 years experience as an active practicing architect and expert witness. He is licensed in multiple states and is a Certified Interior Designer in NJ. He holds an RCS Building Inspector license, and an NCARB certificate. Licensed in NJ, NY, CT, PA, MA, and FL. Provided expert services in IL and the Bahamas. David taught at Essex County College for 8 years, including Construction Means and Methods, Architectural Design, and Architectural History. Cases have involved ADA / Building Accessibility; Personal injuries and wrongful death matters involving design or construction; Building codes and associated regulations; Building envelope design, water infiltration, mold, EIFS, roofing, windows, vapor barrier, masonry specifications, standing seam roofing, flat roofs; Architectural copyright, intellectual property, standard of care; Premises litigation, BOMA / Common Area / Tenant Area measurements and area calculations; Illegal construction / construction w...
View Full Profile

David Del Vecchio, AIA, CID, RCS, NCARB, LEEDap

Design and Construction Expert Witness

David Del Vecchio, Architect, LLC

New York
Architecture, Construction Defects - ADA, OSHA, Contracts, Tenant / Landlord, Construction Administration, Interior Design, AIA Contract Documents, Design Defects, Standard of Care, Affidavit of Merit, Architectural Copyright / Intellectual Property, Residential Design, Commercial / Retail Design, Change Orders, Building Envelope, Consumer Fraud Act
David Del Vecchio has over 34 years experience as an active practicing architect and expert witness. He is licensed in multiple states and is a Certified Interior Designer in NJ. He holds an RCS Building Inspector license, and an NCARB certificate. Licensed in NJ, NY, CT, PA, MA, and FL. Provided expert services in IL and the Bahamas. David taught at Essex County College for 8 years, including Construction Means and Methods, Architectural Design, and Architectural History. Cases have involved ADA / Building Accessibility; Personal injuries and wrongful death matters involving design or construction; Building codes and associated regulations; Building envelope design, water infiltration, mold, EIFS, roofing, windows, vapor barrier, masonry specifications, standing seam roofing, flat roofs; Architectural copyright, intellectual property, standard of care; Premises litigation, BOMA / Common Area / Tenant Area measurements and area calculations; Illegal construction / construction w...
View Full Profile

Tony DiNicola, AIA, RID, APA

TONY DiNICOLA ARCHITECT

Oklahoma
Architecture, Slip Trip & Fall - Forensic Architecture, Architectural Design, Construction Defects, Design Defects, Accessibility Design, ADA, Fair Housing, Texas Accessibility Standards (TAS), Plan Reviews, Inspections, Fair Housing Design Standards, Cause and Origin, Water Intrusion, Roofing Failures, Building Codes, Zoning
Mr. DiNicola has over 40 years of experience in all phases of Architecture, Construction, Forensic Architecture, Expert Witness and Accessibility (ADA and Fair Housing). Mr. DiNicola has 20 years of teaching experience. Mr. DiNicola offers forensic consulting in the Following areas EXPERT WITNESS: Reports and Presentations, Certificates of Merit, Depositions and Testimony ANALYSIS OF ARCHITECTURAL SERVICES: Architect’s Standard of Care, Architect’s Errors and Omissions, Pre-Construction Services Facility Programing, Design, Bidding Services, Construction Services, Construction Administration and Post-Construction Services AMERICANS WITH DISABILITIES ACT: ADA Violations, Texas Accessibility Standards (Plan Reviews and Site Inspections), Site and Building Accessibility Compliance FAIR HOUSING: Compliance with Fair Housing design requirements CODES AND ORDINANCES: Compliance with Building Codes, Local Ordinances, Industry Standards, ADA and Fair Housing BUILDING FAILURES: An...
View Full Profile

Luke Elrath

Bike Expert - Design + Manufacturing Experience

AFI Forensic

Philadelphia, Pennsylvania
Bicycles, Accident Reconstruction - eBikes, Bicycle shop operation, Bicycle assembly, Rider actions, Bicycle event organization, Carbon fiber, Component failure, Design defects, Manufacturing defects, Accident reconstruction, Quality control, Bike share, Materials, Inspection + maintenance, Electric scooters, Mountain bikes
Luke Elrath has worked as a product manager for large and small bicycle manufacturers and has raced competitively on the road, in the velodrome and on trails. In 2019 he was contracted by the United Nations Industrial Development Organization to advise the India bicycle industry on failure analysis and assembly line best practices. He is a League of American Bicyclist Certified Instructor. He is certified in bicycle accident reconstruction by Northwestern University and the Institute of Police Technology and Management. His casework includes all matters related to bicycles and ebikes including bicycle frame and component failure, bicycle assembly and shop operations, bicycle- motor vehicle collisions, and event organization.
View Full Profile

Tony DiNicola, AIA, RID, APA

TONY DiNICOLA ARCHITECT

Fort Worth, Texas
Architecture, Slip Trip & Fall - Forensic Architecture, Architectural Design, Construction Defects, Design Defects, Accessibility Design, ADA, Fair Housing, Texas Accessibility Standards (TAS), Plan Reviews, Inspections, Fair Housing Design Standards, Cause and Origin, Water Intrusion, Roofing Failures, Building Codes, Zoning
Mr. DiNicola has over 40 years of experience in all phases of Architecture, Construction, Forensic Architecture, Expert Witness and Accessibility (ADA and Fair Housing). Mr. DiNicola has 20 years of teaching experience. Mr. DiNicola offers forensic consulting in the Following areas EXPERT WITNESS: Reports and Presentations, Certificates of Merit, Depositions and Testimony ANALYSIS OF ARCHITECTURAL SERVICES: Architect’s Standard of Care, Architect’s Errors and Omissions, Pre-Construction Services Facility Programing, Design, Bidding Services, Construction Services, Construction Administration and Post-Construction Services AMERICANS WITH DISABILITIES ACT: ADA Violations, Texas Accessibility Standards (Plan Reviews and Site Inspections), Site and Building Accessibility Compliance FAIR HOUSING: Compliance with Fair Housing design requirements CODES AND ORDINANCES: Compliance with Building Codes, Local Ordinances, Industry Standards, ADA and Fair Housing BUILDING FAILURES: An...
View Full Profile

Randall King, PhD, PE

Mech Engineer, Patents, Products Liability, Design

King Professional Engineering, Inc.

DALLAS, Texas
Mechanical Engineering, Products Liability - Patents, products liability, machinery design, failure analysis, design defects, 15 US patents + 6 int'l patents, Oilfield, industrial accidents, pumps, valves, consumer products, mechanical equipment failures, inventorship, infringement, invalidity, manufacturing defects, piping, compressors, Agricultural accidents, Drilling
Dr. King is a licensed professional engineer with a Ph.D‭. ‬in mechanical engineering‭: 40+ ‬years experience in mechanical engineering‭, ‬product design‭, research and development of high-pressure oilfield fracturing pumps and automotive components, forensic investigation‭, ‬and litigation support‭. 10 years high-pressure equipment design & R&D at Halliburton, 8 years automotive component design & R&D at NTN, ▪ Testified at 11 trials & 58 depositions ▪ 25 Patent, IPR, & PGR cases – 4 trials & 12 depositions ▪ 21 Patents ▪ Patent infringement, invalidity, inventorship, claim construction ▪ Products liability ▪ Design defects & manufacturing defects ▪ Failure analysis ▪ Oilfield, Industrial, Construction, & Agricultural accidents ▪ Pumps, valves, compressors, blowers, piping ▪ Cranes, trucks, lifts, ATV's ▪ Ag equipment ▪ Consumer products Dr. King has served as a forensic engineer for over 20 years, testifying at 11 trials and 58 depositions in state and federal cou...
View Full Profile

Gary L. Jackson, P.E., CSP, CFEI

Engineering, Safety & Fire - Expert Investigations

System Engineering And Laboratories Corporation (SEAL Corp)

Tyler, Texas
Engineering, Safety - Fire Origin and Cause, Equipment Tractors Cranes, Structural, Explosion, Construction Safety, Accident, Marine, Premises, Design Defects, Manufacturing Defects, Watercraft, Plumbing, Failure Analysis, Construction Defects, Causation, Forensic, Slip Trip & Fall, ATV/UTV, Material, Mechanical
Mr. Jackson has 27+ years' experience as an Engineer with a Bachelor of Science in Mechanical Engineering from Texas A & M University graduating in 1984. Mr. Jackson has testified as an expert witness over 100 times in his career. Mr. Jackson is a licensed Professional Engineer in the states of Texas and Louisiana. he also holds national certifications in safety as a CSP - Certified Safety Professional, CFEI - Certified Fire & Explosion Investigator, Certified Drone Pilot, and state licenses as a Private Investigator, Certified Security Officer, Personal Protection Officer - Texas Private Security. Mr. Jackson is currently a member of the National Association of Fire Investigators and has previously been a member of NSPE, SAE, NFPA, and previously a certified firefighter, certified scuba diver, among other pursuits. Mr. Jackson has testified on a wide variety of subjects for both plaintiff and defense matters. His early professional experience began with NASA/JSC as a support...