Mechanical Engineering Expert Witnesses

Intellectual Property, Mechanical Engineering - Patents, intellectual property, aerial lift, boom lift, scissor lift, manufacturing equipment, agricultural equipment, oil and gas equipment, refuse equipment, garbage trucks, trailers, conveyors, exercise equipment, safety, consumer products, chairs, seating, furniture.

Experienced mechanical engineer (MS, PE) with six issued patents and multiple patents pending. Award winning inventor. Vice President of Alpine Engineering and Design, Inc., a mechanical engineering consulting company with clients around the United States ranging from individual inventors to Fortune 500 companies. Worked on the development of multiple successful products including among other things: aerial lifts, garbage trucks, trailers, exercise equipment and manufacturing equipment. Graduated Cum Laude with a bachelor's degree in mechanical engineering. Completed a master's of science degree in mechanical engineering and an MBA with an emphasis in product development. Licensed professional engineer (PE) and a certified safety professional in comprehensive practice (CSP). Certified trainer for boom lifts, scissor lifts, rough terrain and counterbalanced forklifts. Over 10 years experience in product development, patents, safe equipment design, and design safety reviews. Exper...

Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.

PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.

Expert consultant/witness in over 50 cases with trial experience across the South including AR, MO, OK, TX, TN, LA and MS. Justin Hall, PE is a licensed professional engineer providing a broad range of services in forensic engineering to insurance companies and law firms, construction, energy, mining, and technology, engineering and architectural firms, governmental and educational institutions, property owners, builders and individuals. With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi. SPECIALIZED PROFESSIONAL COMPETENCE - Engineering & Construction Forensics — Expert Consulting/Witness; Structural; Insurance...

Accident Reconstruction, Safety - Vehicle collisions, Premises liability including slip/trip & fall, Safety, Code Compliance, Construction & Industrial Accidents, Failure Analysis, Human Factors, Biomechanics, Mechanical Engineering, OSHA, ADA compliance, Products Liability, Criminal, Licensed Safety Engineer by State of California

Vehicular:
 all vehicle types, multi-vehicle, bicycles, pedestrians, skidmark analysis. damage-matching, occupant biomechanics. visibility & line-of-sight analysis, traffic signal phasing, vehicular component defects, seatbelts. Premises Liability: Code Compliance, Slip, trip, floor friction testing, stairway & ramp accidents, glass injuries, guardrails; illumination issues; manual & electronic gates, ladders, door closing mechanisms, falling objects, structural failures. Occupancies include single- and multi-family residences, retail stores, office buildings, garages, sidewalks, parks and other public access. Industrial & Construction accidents: Walking-working surfaces including ramps, hoisting & conveying, powered lifts, work platforms, forklifts, construction vehicles, materials handling & storage, machine guarding, ladders, scaffolding, trenching & shoring, Cal-OSHA compliance, lockout/tagout, IIPP analysis, human factors & ergonomics issues. Products Liability: Liabili...

Accident Reconstruction, Engineering - Mechanical Engineering, Auto Accidents, Accident Biomechanics, EDR download, analysis, including TESLA, Work Place Accidents, Heavy Vehicles, Motorcycles, Pedestrians, Bicycles, Failure Analysis, Computer Models, Simulations, Finite Element Modeling (FEA), Human Factors, Vehicle Dynamics and Design.

QUALIFICATIONS; Professor of Mechanical Engineering at the California State University in Sacramento, CA with 39+ yrs. experience. Professional Registered Mechanical Engineer (PE License, CA). An expert in accident reconstruction using computer simulations of accidents involving vehicles, trucks, heavy vehicles, motorcycles, biomechanics, pedestrians, bicycles, occupational, workplace, failure analysis impact forces, industrial accidents. EDR (Event Data Recorder) analysis including TESLA vehicles, patents. EXPERT WITNESS EXPERIENCE: Written reports, depositions & trial experience. SPECIALIZED TRAINING; Vehicle Dynamics and Design, Vehicle Safety & Crash Reconstruction, Accident Biomechanics, Finite Element Modeling in Computer Aided Design, Advanced Mechanical Design and Failure Analysis (CSUS); Motorcycle Accident reconstruction, (Northwestern University); EDR Certification, Tech 1, Tech II, EDR Analysis Certification (Collision Safety Institute); Applying Automotive EDR Da...

Medical Devices, Intellectual Property - Mechanical Engineering, Forensic, Medical Device, Nitinol, Biomedical, Patent,IP, Consumer Products, Failure Analysis,Fracture,Fatigue, Truck Rollover, Crashworthiness, Finite Element, FEA, Reliability, Cell Phone,IVC, Composite Material,Piping,Equipment,Machinery,Food Processing,Personal Injury

T. Kim Parnell, PhD, PE is Principal & Founder of Parnell Engineering & Consulting (PEC). Dr. Parnell holds PhD and MSME degrees in Mechanical Engineering from Stanford University, a BES from Georgia Tech, and is a registered Professional Mechanical Engineer (PE) in the State of California. He is an ASME Fellow, an IEEE Senior Member, and a Member of ASM and SAE. Dr. Parnell is Past-Chair of the IEEE Santa Clara Valley Section (IEEE-SCV) (over 13,000 members) and Past-Chair/Board Member of the IEEE Consultants' Network of Silicon Valley (IEEE-CNSV). Dr.Parnell is an experienced Expert Witness, has provided testimony in both trial and deposition, and has authored numerous expert reports, ITC and IPR declarations. He has worked extensively as an expert in medical devices, patents, product failure, product liability, and personal injury. Dr. Parnell has been retained in medical device litigation cases that are in the news.  Products include stent, stent-grafts, AAA devices, IVC F...

HVAC, Plumbing - Engineering-Mechanical, Fire Protection, Energy Conservation, Sustainability, Indoor Air Quality, Ventilation, Heating, Cooling, Air Conditioning, Fire Sprinklers, Colorado PE, Utah PE, Wyoming PE, New Mexico PE

Professional Engineer: Colorado, Utah, Wyoming, New Mexico. Mechanical Engineer, 46 years HVAC, Plumbing, & Fire Protection engineering design, facilities engineering, energy analysis, systems commissioning, troubleshooting, expert witness 7 projects, expert witness subconsultant 49+ projects, and sustainability consulting. Presented over 54 seminars to organizations in the HVAC field. Past President and current Director Rocky Mountain Chapter ASHRAE (American Society of Heating, Refrigeration, and Air Conditioning Engineers); Colorado Renewable Energy Society (CRES) Board of Directors and Secretary; US Green Building Council (USGBC) - Colorado Board of Directors, Programs Coordinator, and Greenbuild 2006 Host Committee Chair. 28 year member of Toastmasters; Member Colorado Earthquake Hazard Mitigation Council; Past member: AIA Colorado Committee on the Environment, AEE, RMAEE. Keynote Speaker for the Rocky Mountain Chapter ASHRAE 2004 Annual Tech Conference.

Accident Reconstruction, Products Liability - Mechanical Engineering, Biomechanics, Automotive, Construction, Engineering, Failure Analysis, Forensic Science, Golf Carts, Human Factors, Motorcycle, Premises Liability, Safety, Slip Trip & Fall

Our staff of experienced engineers are ready to apply established scientific and engineering knowledge and techniques to your case. Our staff has published hundreds of papers, served on national ANSI standards committees and assisted over 2,600 attorneys and insurance agents settle or try their cases. Because the laws of physics and principles of engineering are universal, we are able to investigate and opine on a wide range of topics including motor vehicle crashes, heavy machinery, consumer products, construction sites, falls and biomechanical analyses. In each case, we assist our clients by determining, in as much detail as possible, how and why an accident occurred and communicating those finding in a clear and concise manner.

Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build

Dr. Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder. He is a current member of the New York City Building Code R...

Neuroradiology, Radiology - Brain, head and neck, spine imaging, CT, CTA, MRI, MRA, Myelography, Diagnostic Radiology, Teleradiology, Mammography, Internal Medicine, Medical Devices, Biomedical Engineering, Mechanical Engineering

16 Medical Licenses including FL, CA, NY, OH, IL. Neuroradiology Fellowship Trained & Board Certified. Neuroradiology lecturer. Diplomat, American Board of Radiology. Former NASA Engineering Intern. Former GE Aircraft Engineering Intern.

Engineering - Mechanical Engineering, Electrical Engineering, Structural Engineering, and Forensic Engineering

M2E Consulting Engineers is a full service Mechanical, Electrical, Plumbing, and Structural Engineering Firm located in South Miami, Florida and services the tri-county area. The Firm specializes in design and forensic engineering services, thus our clients benefit from the combination of those two skill sets. Our constant exposure to construction and development problems in our forensics practice allows us to sharpen our design skills on a daily basis, and our design experience completes our problem solving tools in our forensics tasks. The overall benefit comes in the form of a quality, efficient, and effective design. M2E has a track record of successfully completed real estate projects. The Firm also provides real estate owners, developers, contractors, condominium associations, and management companies throughout the country with plan review, construction observations, due diligence inspections and reporting services. The Firm provides design engineering services to the con...

Biomedical Engineering, Intellectual Property - Medical Devices, Failure Analysis, Products Liability, Mechanical Engineering, Biomechanics, Laboratories & Testing, MRI safety, FDA and Regulatory, Finite Element Analysis, Electromagnetic Compatibility, Magnetic Resonance Imaging, MRI, Patent Analysis

David Gross, PhD, PE, is the Director of MRI Safety Evaluations and Engineering Simulations at MED Institute. As a graduate research associate, he was awarded a Pre-Doctoral Fellowship from the American Heart Association (AHA) for his research focusing on improving the MRI safety of patients with implanted cardiovascular devices. He is a member of numerous societies, including the International Society for Magnetic Resonance in Medicine (ISMRM) where he received the Magna Cum Laude Merit Award at the 2016 ISMRM Annual Conference. Additionally, he was a member of the Ethics Subcommittee for the Biomedical Engineering Society. He graduated from Purdue University with a B.S. in Biomedical Engineering and M.S.E. in Interdisciplinary Engineering. He also holds M.S. and Ph.D. degrees in Biomedical Engineering from Ohio State University and is a licensed Professional Engineer.

Engineering, Construction - Mechanical engineering, Electrical engineering, Control systems engineering, Forensic engineering, Certified indoor environmentalist, Design errors and omissions, Construction defects, HVAC systems, HVAC control systems, Hydronic systems, Moisture intrusion, Mold growth

Mr. Flettrich has fifty-six years experience in (1) the design and retrofit of energy efficient mechanical, electrical, and control (MEC) systems for both new and existing residential, commercial, industrial and institutional facilities with particular emphasis on HVAC, refrigeration, hydronics, controls, energy conservation, and energy management systems (2) problem solving and (3) cause and origin investigations related to poorly performing or problematic building systems. He is a licensed PE in mechanical, electrical and control systems engineering in Alabama, Florida, Louisiana, Mississippi and Texas. The combination of his multi-disciplined expertise and his extensive background in design and construction uniquely qualifies him as a forensic expert who is capable of performing comprehensive investigations and eliminates, in many instances, the need to retain multiple engineering experts on cases requiring a multi-disciplined investigation.

Electrical Engineering, Mechanical Engineering - electrical engineer, mechanical engineer, power plant, nuclear, gas, oil, coal, marine, design, commissioning

SUMMARY Electrical Power Plant Consulting Engineer and Project Manager experienced in • Switchgear, protection and control systems design, installation, startup, 
commissioning, performance testing and troubleshooting for • cogeneration, hydroelectric, geothermal, combustion turbine, steam 
turbine, diesel, gasoline and gas fired reciprocating engines and nuclear 
power plants and related equipment and systems for • power plant owners, facility owners, utilities, U. S. Navy, U. S. Air Force, 
US Coast Guard, MSC, environmental engineers, power system component manufacturers and switchgear & control systems manufacturers • Forensic expert witness and consultancy related to electrical engineering in electric power systems. 
 EDUCATION & CREDENTIALS • MBA, Colgate Darden Graduate School of Business Administration, University of Virginia, Charlottesville, VA 1983-1985. • BSEE, Clemson University, Clemson, SC 1968-1972 LICENSES Registered Professional Electrical Engineer, in as ...

Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build

Dr. Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder. He is a current member of the New York City Building Code R...

Electrical Engineering, Mechanical Engineering - electrical engineering, mechanical engineering, power plant, nuclear, gas turbine, generator, engineering, relays, design, contractor, commissioning, marine, Electrical Power, Utility, Power, Electrical Generation, Generation

SUMMARY Mr. Haaland has thirty four years experience in power production, design, construction, and commissioning, with 27 years managing people and projects. He is a registered professional engineer in Maryland and held a Senior Reactor Operator’s license at Indian Point #3 Nuclear Power Plant. Experience is in conventional, nuclear, and alternate fuel power plant mechanical and electrical systems management, design, construction, plant outage management, start-up, performance testing, and operation. He has performed as Project Manager, Construction Manager, and Commissioning Manager for several Greenfield power projects. He has successfully engineered, estimated, planned, executed work, and provided troubleshooting services for power plants of varied prime movers. His has been instrumental in meeting contractual and schedule requirements. EDUCATION AND COMMITTIES BSME, New York Institute of Technology, 1980 IEEE-45.1 Shipboard Power Systems – Design Committee ASSOCIATIONS...

Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.

PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Failure Analysis, Metallurgy - Derailment Investigation, Certified Welding Inspector (CWI), Professional Engineer (PE), Forensic Metallurgy, Railroad, AREMA Rail Testing, Mechanical Testing, Metallurgical Testing, Mechanical Engineering, Corrosion, API Fitness for Service (FFS) Evaluation

Brett has over 13 years of experience as a mechanical engineering and metallurgical consultant specializing in forensic metallurgy (failure analysis). He has a strong background in the rail industry, having participated in hundreds of derailment investigations and rail related failure analyses. Brett has earned international recognition for his failure analysis capabilities and has a wide range of experience, including: API Fitness for Service (FFS) Evaluations, field testing, mechanical/metallurgical laboratory management, legal expert witness services, and failure analysis for Rail, Food, Manufacturing, Oil and Gas, Medical, and Transportation industries. Brett obtained his Doctor of Science degree in Mechanical Engineering from Washington University in St. Louis, has obtained Professional Engineering (PE) licensure in 48 states, and is an AWS Certified Welding Inspector (CWI). He is an active member of ASM International, American Society of Mechanical Engineers (ASME), Natio...

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client. Warehouse Distribut...

Engineering, Forensic Science - Forensic Engineering, Building Structures and Systems, Structural Engineering, Mechanical Engineering, Civil Engineering, Foundations, HVAC, Plumbing, Electrical, Construction, Construction Defects, Investigations, Fires, Floods, Insurance, Property Casualty, Disaster Recovery, Premises Liability.

Expert Engineering Staff with Interdisciplinary Experience Client base consists of Insurance Professionals, Building Owners, and Attorneys representing Plaintiff's and Defendants. Retained as Experts in Over 10,000 cases. National Academy of Forensic Engineers Certified Safety Professional Certified Fire and Explosion Investigator National Society of Professional Engineers American Society of Civil Engineers American Society of Mechanical Engineers OSHA and Suspended Scaffold Certifications New York City Special Inspection Agency Licensed in New York, New Jersey, Pennsylvania, Connecticut, Florida, US Virgin Islands Qualified as Experts in State Supreme and Federal Courts FAA Certified Drone Pilot

Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build

Dr. Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder. He is a current member of the New York City Building Code R...

Engineering, Forensic Science - Forensic Engineering, Explosions, Electrical Engineering, Mechanical Engineering, Product Liability, Fires, Fire Protection, Appliances, Construction, Building Defects, Failure Analysis, Laboratories & Testing, Building Defects, Plumbing

Steven Pietropaolo has a Bachelor Degree of Engineering in Electrical Engineering and a Master of Science Degree in Mechanical Engineering from Manhattan College. Mr. Pietropaolo is a Licensed Professional Engineer (P.E.) in the State of New York, amongst many others. He is a Certified Fire and Explosion Investigator, a Certified Fire Investigator Instructor, a Certified Forensic Consultant and Certified Forensic Professional Engineer. He is a Fellow of the American College of Forensic Examiners Institute. He is Board Certified in Forensic Engineering by the National Academy of Forensic Engineers. He has 30+ years of hands on engineering experience including electrical, mechanical, materials, safety, human factors, fire protection, and construction. He has knowledge of codes and standards used in construction and industry including building codes and safety codes. He is an expert in investigating and opining on New York State Labor Law cases (§200, §240(1) and §241(6)) involving ...

Accident Reconstruction, Products Liability - Mechanical Engineering, Biomechanics, Automotive, Construction, Engineering, Failure Analysis, Forensic Science, Golf Carts, Human Factors, Motorcycle, Premises Liability, Safety, Slip Trip & Fall

Our staff of experienced engineers are ready to apply established scientific and engineering knowledge and techniques to your case. Our staff has published hundreds of papers, served on national ANSI standards committees and assisted over 2,600 attorneys and insurance agents settle or try their cases. Because the laws of physics and principles of engineering are universal, we are able to investigate and opine on a wide range of topics including motor vehicle crashes, heavy machinery, consumer products, construction sites, falls and biomechanical analyses. In each case, we assist our clients by determining, in as much detail as possible, how and why an accident occurred and communicating those finding in a clear and concise manner.

Fire, Oil and Gas - Mechanical Engineering, Boilers, Natural Gas, Furnaces, Carbon Monoxide, NFPA Codes, gas piping, steam, explosions, fires, ovens, OSHA, heaters, flue piping, NFPA 54, NFPA 85, ASME CSD-1, NFPA 86, NFPA 59A, NFPA 820, Methane, NFPA 56, Purging, Boiler Safety, Steam piping, Gas piping

Mr. Puskar is currently the President of Prescient Technical Services in Cleveland, Ohio. His firm provides strategic safety solutions related to flammable gas safety and the prevention of fires and explosions related to piping systems and combustion equipment in the oil and gas industry. Mr. Puskar is a licensed professional engineer in Ohio and 6 other states. Mr. Puskar holds a Bachelor’s degree in Mechanical Engineering from Youngstown State University and an MBA from the Weatherhead School of Management at Case Western Reserve University in Cleveland, Ohio. Mr. Puskar is the 2015 National American Society of Mechanical Engineers (ASME) Uzgiris Barnett medal winner for a lifetime of safety contributions to the industry. Mr. Puskar has served on several National Fire Protection Association (NFPA) standards and code committees including NFPA 54 (National Fuel Gas Code), 86 (ovens and furnaces), 85 (boilers), 820 (wastewater treatment plants), and 56 (flammable gas piping safety, 8...

Medical Devices, Biomedical Engineering - Mechanical Engineering, R&D, Product Development, Clinical diagnostics, Blood collection, Biospecimens, Point of care testing, Microfluidics, Spectroscopy, Cell therapy, Intellectual Property, Microscopy, Physics, Biomedical sensing, Optics, Imaging, Mathematics, Laboratories & Testing, Lasers

Dr. Fletcher is Founder and Principal Consultant at RnDDx Solutions LLC, a consulting firm focused on industrial biomedical and mechanical engineering, and research and product development, in medical devices, diagnostics, optical devices, point-of-care blood sample testing, and on expert witness patent litigation, including subject matter expertise in medical device mechanical engineering, and subject matter expertise in medical devices for blood collection and blood sample processing for diagnostics and therapeutics. He has particular expertise in mechanical engineering design and development of non-invasive and minimally invasive biomedical diagnostics systems, blood collection and stabilization, blood separation, and blood and cell preparation for both diagnostic and therapeutic applications, including the development of sample collection devices, needles, and lancets. He is co-inventor on 23 patents for devices and methods in blood collection and processing. Yale educated Ph...

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client. Warehouse Distribut...

Mechanical Engineering, Failure Analysis - Mechanical Engineering, Materials, Failure Analyis, Forensic Engineering, Manufacturing, Design, Warnings - Marketing Defect, Oil & Gas, Metallurgy, Stress, Root Cause, Safety Hierarchy Application, Laboratory Analysis, Inspection, Firearms, Electronics, Field Investigations, Fracture Surface

Dr. Scott Anson has been practicing and teaching engineering for over 28 years. The first 8 years were in industry engineering roles involving process development and tooling design, as well as extensive laboratory failure analysis. During his over 20+yr. academic career he has held multiple industry appointments simultaneous with his academic role, in addition to his independent consulting work. He provides forensic engineering services involving product design, manufacturing defects, and warnings/instructions (marketing defects). He is a licensed professional engineer (P.E.) in Texas and has an active NCEES record to facilitate licensing in other states. Dr. Anson has complementary skills in four key dualities that uniquely enhance his effectiveness in forensic engineering and expert witness services. 1) He is formally trained and experienced in both Mechanical Engineering and Materials Engineering, which enables him to assess both mechanical overstress and materials degrad...

Products Liability, Manufacturing - Testing, Failure Analysis, Ergonomics, Product Design, Manufacturing, Mechanical Engineering, Premises Liability, Structural Engineering, Warnings and Labels, Slip, Trip & Fall, Metallurgy, Machinery/Equipment

I have 37 years of engineering design experience in multiple industries. I have developed designs for aerospace, consumer products, industrial machinery and products for use in retail environments. Strong manufacturing background and familiarity with all types of manufacturing equipment and processes. These include CNC cutting equipment, roll forming, stamping and progressive dies, Mig, Tig, and high frequency welding, robotics and automated manufacturing processes, assembly, finishing and packaging systems. I have the ability and resources to do physical testing of products, materials, including destructive and non-destructive testing. Strong analytical skills to assess product design and performance empirically and theoretically relative to specific industry standards. I am well versed in safety warnings and labels, and the responsibilities these requirements place on manufacturers of products and equipment.

Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.

Expert consultant/witness in over 50 cases with trial experience across the South including AR, MO, OK, TX, TN, LA and MS. Justin Hall, PE is a licensed professional engineer providing a broad range of services in forensic engineering to insurance companies and law firms, construction, energy, mining, and technology, engineering and architectural firms, governmental and educational institutions, property owners, builders and individuals. With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi. SPECIALIZED PROFESSIONAL COMPETENCE - Engineering & Construction Forensics — Expert Consulting/Witness; Structural; Insurance...

Engineering, Construction - Mechanical engineering, electrical engineering, plumbing engineering, engineering design, fire investigation, fire protection, fire alarm.

Qualified and experienced MEP (Mechanical, Electrical, Plumbing) engineer with expertise in design and construction. Member of the Investigative Engineers Association.

Mechanical Engineering, Equipment & Machinery - Mechanical engineering, industrial process, industrial design, energy modeling, energy control, steam production, fluid transfer, process analysis, heat exchange, piping, pumps

Alan Werner’s skills and background include forensic analysis in the areas of industrial process systems, industrial process equipment including pumps, fans, heat exchangers, mixers, specialty equipment, piping include safety devices, and pipe support systems. Specific experience has been gained in chemical process plants, pulp and paper mills, wood processing plants, boiler plants, chiller plants, and co-gen systems. Using a proprietary thermodynamic model, I am able to replicate boiler and chiller systems to duplicate normal and off-spec operations. I have designed mechanical parts and machinery, some using unusual materials and/or features. I have experience in worker sound exposure investigation and remediation, as well as "fence line" acoustical research. Trained for patent litigation. My professional licenses are in Washington, California, Florida (Ret), and British Columbia (former).