Corrosion Expert Witnesses

Corrosion expert witnesses and consultants listed here may be able to form expert opinions, draft expert witness reports, provide expert witness testimony at deposition and/or trial as or serve as consulting (non-testifying) experts on corrosion. The corrosion expert witness listings on this page are typically from fields/areas of expertise such as: Chemistry & Chemicals, Civil Engineering, Construction Defects, Failure Analysis, Metallurgy, Products Liability, and Structural Engineering.

Joseph Quinn, M.S., P.E. Materials FACT

Los Angeles, California
Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle,Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe, HVAC, CPVC, Oil & Gas, Welding
Joseph Quinn, MS, PE, is a Forensic Metallurgy and Metallurgical Engineering consultant. He is a Licensed Professional Engineer in Metallurgical Engineering and is registered in 7 states (CA, PA, UT, NV, AZ, CO, WA). He has provided over 1,000 Failure Analysis investigations on metallic and non-metallic (glass, plastic, rubber, and composite) materials or products. Mr. Quinn provides metallurgical and materials consultation, expert witness testimony, and forensic failure analysis for civil litigation with retentions by defendants and plaintiffs. He has received awards in the International Metallographic Contest and has conducted several presentations on metallurgical engineering and failure analysis subjects at universities, ASM meetings, and industry events. He is President of the National Society of Professional Engineers in California (NSPE-CA) and is active in several technical societies. He has taught metallurgical engineering course topics in Principals and Applications of ...

Frederick C Anderson, PE Advantec Engineering LLC

Avon, Connecticut
Failure Analysis, Products Liability - Metallurgy, Materials Science, Forensic Engineering, Corrosion, Fatigue, Fracture, Pipe/Tube/PEX/CPVC, Valve, Bolt, Coupling, Boiler, Power Plant, Quality, Weld, Aerial Lift, Hoist, Wire Rope, Fire Protection, Plumbing, Construction Defects
Mr. Anderson is the founder of Advantec Engineering LLC and provides expert consultation, laboratory testing and analysis, and litigation support regarding materials failure analysis, forensic engineering investigations, corrosion, and structural analysis. He has more than forty years of professional engineering experience. Mr. Anderson has provided engineering support and/or testimony for cases involving product liability, industrial accidents and equipment failures, commercial and residential accidents and equipment failures, bridge structures, and aircraft, marine, and vehicle accidents. He has also provided expert testimony and/or litigation support in cases involving flow accelerated corrosion, stress corrosion, corrosion fatigue, pitting, weld defects, and fitness for service of large industrial components, commercial products, and consumer products. Mr. Anderson is especially skillful at translating highly complex and technical information into something understandable by ...

Edward S. George E & S Consulting, Inc.

Saint Augustine, Florida
Metallurgy, Failure Analysis - Metallurgy, Products Liability, Coatings Inspection, Welding Inspection, Slip and Falls, Material Science, Forensic Engineering, Corrosion, Fatigue, Fractures, Bolt Failures, Weld Failures, Construction Defects
Professional Experience Court qualified technical expert in criminal and civil court, deposition and trial experience. Extensive experience in the field of failure analysis involving a variety of products, components, and materials utilized in both industrial and consumer applications. Experience in inspection and failure analysis of building materials. Proficient in microscopic analysis techniques and digital imagery. Proficient in destructive and non-destructive testing techniques and procedures in accordance with the applicable American Society of Testing Materials Standards. Direct experience in the field of materials thermal processing and procedures. Expert in material science, forensic engineering, corrosion, fatigue, fractures, bolt failures, weld failures andconstruction defects. Professional Licenses  Registered Professional Engineer: P.E. #51375 Florida (1997- Present)  Certified Welding Inspector: C.W.I #07060051 (2007-Present)  Certified AMPP Coating Inspector Level...

John M Fildes, Ph.D. Spotlight Business Consulting

Batavia, Illinois
Chemistry & Chemicals, Metallurgy - Product Failures, Accidents, Analytics, Materials, Chemical, Chemical Processes, Friction, Wear, Coatings, Corrosion, Composites, Ceramics, Carbon Monoxide Detectors; Product Design, Aviation, Buildings Materials, Adhesives, Roadway Materials, R&D, Expert Witness
Dr. Fildes has extremely strong problem-solving and analytical skills, excellent communications abilities, and decades of experience of successfully conveying, with credibility and confidence, highly technical issues to laypeople. He successfully tackles challenging technical problems and often sees key issues and devises approaches, which others have missed, through a combination of vast experience, extensive technical knowledge, skilled use of analytics, creativity, an excellent understanding of testing and analysis, and strong project planning and management capabilities. • A doctoral-level scientist who has organized, written proposals, conducted, and managed $27.5 million in funded projects including research, development, litigation expert witness investigations, and collaborations involving Government labs, large defense companies, and leading universities with funding from the Army, Navy, the Defense Advanced Research Projects Agency (Technology Reinvestment Program), The ...

William J. Kirkham, P.E., S.E., Ph.D. APT Engineering LLC

Eudora, Kansas
Structural Engineering, Construction Defects - Codes, Concrete Failures, Steel Failures, Masonry Failures, Wood Failures, Corrosion, Seismic Design, Wind Design, Partial/Full Collapse, Prestressed Concrete, Post-tensioned Concrete, Facade performance, Cladding Failures, Vibration, Timber Construction, Timber Decay, Wood Decay, Tall Buildings
As an engineer, I am fascinated by complexity and understanding new and different situations. I love to talk about engineering and explaining engineering processes and principles to young engineers and lay persons is personal passion. Examining a structural failure brings out my inner researcher, and explaining the cause and physics to a jury or arbitration panel channels my teacher personality. I work as a forensic engineer with the intent of helping the legal industry understand engineering principles and to help citizens resolve their disputes justly. Though I have worked as a scientific programmer and chemical engineer, my primary expertise is in structural engineering. I began professional practice at kpff in Portland, OR in 1998. In 2001, I was hired by DCI Engineers. In 2003, I started my own consulting engineering firm which I continue to operate. I have designed concrete, steel, masonry and wood structures, generally commercial, government or schools. About half of my work...

John Hlinka, PE, M. ASCE

Benton, Kentucky
Structural Engineering, Civil Engineering - civil, railroad, accident, cranes, failures, foundations, structures, drainage, culverts, washouts, hydrology, concrete pump trucks, corrosion, chemical, industrial, building codes, inspections, construction, OSHA Compliance, swimming pools, structural, tornado, earthquake, railroad, highway, stone
Mr. Hlinka has worked over 40 years in the Engineering, Procurement and Construction Management market with experience in numerous industries: Chemical, Oil Refinery, Pulp & Paper, Adhesives, Nuclear Power Generation, Nuclear Feed Stock, and Steel. His work has overlapped with residential and commercial industries. Throughout his career he has engineered and managed a myriad of projects in these industries and has provided leadership to the various companies in the capacities of: Site Manager, Design Manager, Project Manager, Construction Supervisor, and currently as President. Design engineering, analysis, and inspection experience includes structural steel, reinforced concrete, stone, masonry, wood, and stormwater drainage.

Brett Pond, PhD, PE, CWI Pond Industries LLC

Omaha, Nebraska
Failure Analysis, Metallurgy - Derailment Investigation, Certified Welding Inspector (CWI), Professional Engineer (PE), Forensic Metallurgy, Railroad, AREMA Rail Testing, Mechanical Testing, Metallurgical Testing, Mechanical Engineering, Corrosion, API Fitness for Service (FFS) Evaluation
Brett has over 13 years of experience as a mechanical engineering and metallurgical consultant specializing in forensic metallurgy (failure analysis). He has a strong background in the rail industry, having participated in hundreds of derailment investigations and rail related failure analyses. Brett has earned international recognition for his failure analysis capabilities and has a wide range of experience, including: API Fitness for Service (FFS) Evaluations, field testing, mechanical/metallurgical laboratory management, legal expert witness services, and failure analysis for Rail, Food, Manufacturing, Oil and Gas, Medical, and Transportation industries. Brett obtained his Doctor of Science degree in Mechanical Engineering from Washington University in St. Louis, has obtained Professional Engineering (PE) licensure in 48 states, and is an AWS Certified Welding Inspector (CWI). He is an active member of ASM International, American Society of Mechanical Engineers (ASME), Natio...

Thomas W. Caldwell, PE Summit Associates of Bedford, LLC

Bedford, New Hampshire
Metallurgy, Failure Analysis - Design Defects, Material Selection, Engineering, Manufacturing Defects, Manufacturing, Quality Control, Mechanical Failure, Corrosion, Fitness for Use, Equipment Operation, Equipment Maintenance, Trade Secrets
Testifying and consulting expert for both plaintiff and defense counsel. Cases have involved hand tools, recreational and exercise equipment, fire fighting apparatus, rotating machinery, construction hardware, fasteners, joints, piping, tubing, lighting fixtures. 40+ yrs designing, manufacturing and quality assurance of components for consumer & industrial products including safety and performance-critical applications for aircraft, automotive safety systems, medical products, construction machinery, defense arms and munitions. Mr. Caldwell has testified in patent infringement and trade secret misappropriation cases. He has lectured in the USA, Europe and India on manufacturing premium quality metal products. He has published in the areas of batteries, materials selection and materials processing. Licensed Professional Engineer, Ohio. US Patent holder.

Robert A Iezzi, PhD RAI Technical Solutions, Inc.

West Chester, Pennsylvania
Chemistry & Chemicals, Metallurgy - Paint, Plastics, Metal Coatings, Packaging, Fluoropolyners, Pretreatments for Metals & Plastics, Patents, Nanotechnology, Corrosion, Polymer Science, Metal Alloys, Electrochemistry, Steel, Laminates, Li-ion Batteries, Surface Preparation & Cleaning, Extrusion, Product Development, Li-ion batteries
I have more than 40 years of experience in paint and metal coatings, corrosion, plastics, plastic additives, pretreatments for metals and plastics, fluoropolymers, intellectual property, patent infringement, Li-ion batteries, composites, extrusion, PVC, nanotechnology, metal & plastic packaging, polymer & materials science, electrochemistry, laminates, metal buildings, surface preparation & cleaning, steel & metal alloys. I have extensive experience as an expert witness and consultant in these technical fields, and am a recognized authority on the technology. Most of my experience was obtained while working in R&D at Fortune 500 companies, specifically Arkema Chemicals, Campbell Soup, Betz-Dearborn, and Bethlehem Steel, where I developed and commercialized dozens of innovative products. I was awarded seven U.S. patents, multiple foreign patents, and have authored 2 book chapters and 50 publications in respected technical journals and conferences. I earned my Ph.D. in Materials Sci...