Industrial Accidents Expert Witnesses

Industrial accidents expert witnesses and consultants listed here may be able to form expert opinions, draft expert witness reports, provide expert witness testimony at deposition and/or trial as or serve as consulting (non-testifying) experts on industrial accidents. The industrial accidents expert witness listings on this page are typically from fields/areas of expertise such as: Fire, Human Factors, HVAC, Independent Medical Examinations, Industrial Hygiene, Mechanical Engineering, OSHA, Plastic Surgery, Products Liability, Safety, Technology, and Warnings & Labels.

John H Hamilton, MSME PE

MOUNTAINBURG, Arkansas
Mechanical Engineering, Safety - Guarding, plastics processing equipment, lockout-tagout (LOTO), intellectual property, Industrial accidents, agricultural accidents, on product warnings, machine design, pumping-piping systems,
Mr. Hamilton, is a professional engineer and a full-time faculty member of the University of Arkansas. In this this faculty position he is responsible for teaching undergraduate mechanical engineering courses. Previously Mr. Hamilton worked as a full-time consulting engineer assisting professionals in both industry and the legal community by serving as a consultant and as an expert witness. As an expert, Mr. Hamilton has evaluated hundreds of consumer, industrial and agricultural incidents related to safety, machine guarding and mechanical engineering. He has worked in industry as a manufacturing and plant engineer and has been responsible for the safety of an industrial plant with over 300 employees, where he designed guards and worked extensively with plastic injection molding machines amongst many other industrial safety responsibilities. Mr. Hamilton is devoted to educating the next generation of engineers. He has developed and teaches a senior level Mechanical Engineering co...

David R. Lenorovitz, PhD, CPE LENPRO Services, Inc.

Littleton, Colorado
Human Factors, Warnings & Labels - Human Factors Engineering, Ergonomics, Hazard Analysis, Safety Procedures, Warnings, Warnings Adequacy, Warning Systems, Product Liability, Perception-Memory-Cognition, User Distractions/Diverted Attention, Task Analysis, Industrial Accidents
Dr. Lenorovitz is a Board Certified Ergonomist / Human Factors Professional with extensive experience in developing and applying knowledge regarding the ways in which human capabilities and limitations can materially effect a user's performance (i.e., success or failure) when interacting with a variety of products or equipment. He has performed HF-related work evaluating, designing, developing, and testing user-interactive-systems for a wide range of industrial, governmental, and individual clients. His forensic experience has included applying HF scientific principles, preparing analysis reports, providing expert opinions, and testifying in cases involving: hazard analysis; evaluating safety systems; assessing the necessity for and adequacy of warnings, instructions, operator manuals, work practices, & organizational procedures; addressing product design and product liability issues; and investigating incidents involving user distractions or diverted attention situations.

Steven R. Sawyer, ARM, MS, CSP LSW & Associates Safety Consulting Services, LLC

Pueblo West, Colorado
OSHA, Safety - Grain Bin Engulfment, Lockout/Tagout, Machine Guarding, OSHA Regulations, Grain Augers/Belt Conveyors, Industrial Accidents, Skid-steer Loaders, Forklift, Front End Loaders, Agricultural Equipment Operations, Telehandlers, Confined Spaces
Board Certified Safety Professional (CSP) with a Master’s Degree in Safety Management and an Associate of Risk Management (ARM). Twenty years- experience as a safety consultant working with clients in General Industry and Agribusinesses to prevent incidents and protect workers. Speaker at state safety conferences and trade associations. OSHA Authorized General Industry Trainer for 10 and 30 Hour courses. Ives certified trainer for forklifts, telehandlers, skid-steers, front end loaders, back hoes, boom lifts and scissor lifts. Conducted fatality and catastrophic incident investigations for clients to determine cause of incidents. Audited client’s safety programs to determine compliance with government regulations and determine areas for improvement. Assisted clients with OSHA inspections and citation abatement. Assisted clients with safety program development and conducted safety training. Trained workers where English is a second language. Professional member o...

Curt M Freedman, PE, CEM, CEA, LEED AP CMF Engineering Inc

Connecticut
Mechanical Engineering, HVAC - HVAC, Carbon-monoxide incidents, HVAC design, Winter Freeze-ups, Pipe failures, Industrial accidents, Appliance malfunctions, Fire sprinkler system malfunctions, Solar panel failures, Electrical equipment failures, Building assessments, Wind/flood damage, Fork lift/machine accident evaluations
Provide professional engineering consulting services for the residential, commercial, and industrial sector. Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. STATES OF ENGINEERING REGISTRATION Connecticut, Florida, Maine, Massachusetts, Maryland, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont Certified Energy Manager (CEM), Certified Energy Auditor (CEA), The Association of Energy Engineers. Leadership in Energy and Environmental Design (LEED® AP), U.S. Green Building Council. Tau Beta Pi (τβπ) ~ Engineering honor society. PROFESSIONAL ORGANIZATION AFFILIATIONS: ~ Association of Energy Engineers (AEE); ~ The ...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Florida
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Meyer R. Rosen, FAIC, CPC, CChE Interactive Consulting, Inc.

Bonita Springs , Florida
Products Liability, Fire - Fires, Explosions, hazardous chemicals, Chemical burns,Toxic exposures, chemistry, chemical engineering, consumer products, industrial products, industrial accidents, materials science, cosmetics, hair relaxers, warnings & instructions, OSHA Codes, Standards, SDS, Patent Infringement, Trade Secrets
Experienced Consulting and Testifying Forensic Litigation Expert Witness. Products Liability and Personal Injury. Plaintiff or Defense; Federal and State. Incident Reconstruction, Complex Litigation, Early case consultation, International Experience. 25 years Industrial Experience. Consumer & industrial product development. Evaluation of hazardous chemicals & safety issues; Chief Scientific Advisor and Director of Technical & Regulatory Symposia for HBA (Health & Beauty, America), Academic Experience: Adjunct Professor Fire Science (15 years); Fire and Explosion Investigator (E-CFEI); Advanced Training (CFEI). Member: National Fire Protection Association, American Chemical Society, American Institute of Chemical Engineers, Contributing Expert for ASTM Standards- Making Committees (American Society of Testing Materials), Peer Reviewer Professional Journals, Member: Center for Dermal Research, Rutgers University. Fellow: American College of Forensic Examiners, Fellow: America...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Georgia
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Adam K Aleksander, PhD, PE, CSP Aleksander & Associates P.A.

Boise, Idaho
Human Factors, Products Liability - Warnings, Labels, Reconstruction, Visibility, Failure Analysis, Forensic Engineering, Defects, Photogrammetry, Metallurgy, Human Factors, Ergonomics, Construction, OSHA, Safety Engineering, Product Liability, Equipment Failures, Industrial Accidents, Power Utility Accidents, Insurance Claims
Specific Cases: Go cart nip point fatality, washing machine amputation, amputations in punch presses, hydro-pneumatic tank explosion, agricultural truck amputation, airport conveyors, biscuit cutter, amusement rides, water-jet fatality, slips & trips, lead rope snap, exercise machine failures and injuries, document burn injuries, folding chair collapse, concrete anchor system, nail gun injury, prosthesis bolt failure, steam iron electrocution, pool light burn, design of warnings and instructions, ATV rollover, automotive failures and crash related phenomena, measurement of ECDs (TASER®) Farm equipment, failed engines, mining conveyors, power plant systems, belt conveyors, potato processing system, sewer line, tire shredder processing analysis, failed brake die, failed conveyor bearing, RV axle repair failure, trailer suspension system failure, trailer separation, dump truck telescoping cylinder failure, brake system, headlight filament analysis, service station gasoline tank leak, b...

Randy Gray, CHST, CSHM, GSP, OHST, BS, MS Grayhawk Advantage, Inc., dba. Grayhawk Safety & Health Consulting Company

Benton, Kentucky
OSHA, Safety - OSHA, Industrial Accidents, Safety, Industrial Hygiene, Loss Control, Risk Management, Slip Trip & Fall, Construction Accidents, Manufacturing Accidents, Insurance, Investigations
Mr. Gray provides expert witness services in defense and plaintiff litigation matters, safety and health on-site audits, customized OSHA safety and health training, OSHA 10 and 30-hour construction and general industry training, and assistance for employers who have been issued citations that they need assistance with obtaining better citation settlement agreements and working in conjunction with legal counsel with litigation assistance contesting OSHA citations. Highly-experienced OSHA Forensic Expert Witness with 75 separate fatality and more than 150 non-fatal work-related accidents. 25+ years of OSHA compliance with 29 CFR regulations related to construction and general industry. 8 years of private Safety and Health Consulting specializing in Defense and Plaintiff's occupational injuries, conducting safety and health audits, Authorized OSHA Outreach Trainer for construction and general industry, and employer assistance with settlement of OSHA citations, and testifying in O...

Jason S. Kiddy, PhD, PE, CFEI Aither Forensic Engineering

Gambrills, Maryland
Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation
Dr. Kiddy is a principle at Aither Forensics Engineering, LLC, a forensics consulting firm located in central Maryland. Dr. Kiddy spent over 20 years in various industries prior to becoming a full-time expert witness providing a broad industry experience base from which to draw extensive knowledge on a wide variety of topics. Dr. Kiddy's work experience includes the oil and gas industry, aircraft and helicopter design, marine structures, wind turbines, and telecommunications. From a technical perspective, Dr. Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr. Kiddy is a registered professional engineer in five states, a certified fire and ex...

Curt M Freedman, PE, CEM, CEA, LEED AP CMF Engineering Inc

Longmeadow, Massachusetts
Mechanical Engineering, HVAC - HVAC, Carbon-monoxide incidents, HVAC design, Winter Freeze-ups, Pipe failures, Industrial accidents, Appliance malfunctions, Fire sprinkler system malfunctions, Solar panel failures, Electrical equipment failures, Building assessments, Wind/flood damage, Fork lift/machine accident evaluations
Provide professional engineering consulting services for the residential, commercial, and industrial sector. Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. STATES OF ENGINEERING REGISTRATION Connecticut, Florida, Maine, Massachusetts, Maryland, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont Certified Energy Manager (CEM), Certified Energy Auditor (CEA), The Association of Energy Engineers. Leadership in Energy and Environmental Design (LEED® AP), U.S. Green Building Council. Tau Beta Pi (τβπ) ~ Engineering honor society. PROFESSIONAL ORGANIZATION AFFILIATIONS: ~ Association of Energy Engineers (AEE); ~ The ...

Emil J Geiger, PhD, PE Geiger Engineering

Reno, Nevada
Mechanical Engineering, Technology - Product Defects, Microtechnology, Sensors, Microfluidics, MEMS, Product Design, Gas Sensors, Industrial Accidents, Failure Analysis, Laboratory Accidents, Injection Molding, Fluid Dynamics
With over 15 years of mechanical engineering experience, Emil has a broad range of skills that bridge many settings and applications. He draws from his broad background ranging from academic laboratories to technology startups to solve problems efficiently and effectively. As a former professor, he is a persuasive communicator and is able to explain difficult concepts crisply and accurately both orally and in text. His primary expertise is in microtechnology and has over a dozen published articles in this area. His research has been supported by National Science Foundation and NASA. He has extensively lectured on the mechanical design process and is able to provide objective analysis in the area of product design and product defects.

Curt M Freedman, PE, CEM, CEA, LEED AP CMF Engineering Inc

New York
Mechanical Engineering, HVAC - HVAC, Carbon-monoxide incidents, HVAC design, Winter Freeze-ups, Pipe failures, Industrial accidents, Appliance malfunctions, Fire sprinkler system malfunctions, Solar panel failures, Electrical equipment failures, Building assessments, Wind/flood damage, Fork lift/machine accident evaluations
Provide professional engineering consulting services for the residential, commercial, and industrial sector. Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. STATES OF ENGINEERING REGISTRATION Connecticut, Florida, Maine, Massachusetts, Maryland, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont Certified Energy Manager (CEM), Certified Energy Auditor (CEA), The Association of Energy Engineers. Leadership in Energy and Environmental Design (LEED® AP), U.S. Green Building Council. Tau Beta Pi (τβπ) ~ Engineering honor society. PROFESSIONAL ORGANIZATION AFFILIATIONS: ~ Association of Energy Engineers (AEE); ~ The ...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

New York
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Elliott H Rose, MD The Aesthetic Surgery Center

New York, New York
Plastic Surgery, Independent Medical Examinations - Burn Injuries, Catastrophic Burns, , Explosions, Dog Bites, Facial Trauma, Burns of the Hand, Scars, Facial Paralysis, Bell’s Palsy, Auto Accidents, Product Liability, Premise Liability, Industrial accidents, Independent Medical Examinations, Scar Assessment and Permanency, Future Medical Costs
Dr. Elliott Rose, a board certified plastic and reconstructive surgeon is currently Associate Clinical Professor in the Division of Plastic and Reconstructive Surgery at The Mount Sinai Medical School and an attending surgeon at The Mount Sinai Medical Center. Dr Rose’s international reputation in burn reconstruction, dog bite injuries and re-animation of the paralyzed face attracts patient from all over the world. He was voted by his peers as the Best Plastic Surgeon in New York City for "Corrective Facial Surgery” and is listed in the "New York Magazine Best Doctors" and "Castle Connolly America’s Top Doctors.”. Dr. Rose has also appeared on ABC’s “20/20” and “Good Morning America”, NBC’s “Today Show”, “Entertainment Tonight”, Fox News Network, as well as numerous local news segments in NYC. Dr Rose is a member of numerous professional societies including the Aesthetic Society, the American Burn Association, and both the American and World Reconstructive Microsurgery Socie...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Jamestown, North Carolina
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Jason S. Kiddy, PhD, PE, CFEI Aither Forensic Engineering

Pennsylvania
Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation
Dr. Kiddy is a principle at Aither Forensics Engineering, LLC, a forensics consulting firm located in central Maryland. Dr. Kiddy spent over 20 years in various industries prior to becoming a full-time expert witness providing a broad industry experience base from which to draw extensive knowledge on a wide variety of topics. Dr. Kiddy's work experience includes the oil and gas industry, aircraft and helicopter design, marine structures, wind turbines, and telecommunications. From a technical perspective, Dr. Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr. Kiddy is a registered professional engineer in five states, a certified fire and ex...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

South Carolina
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Tennessee
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Deborah E Dickerson, PhD CIH CSP CHMM Dickerson Consulting LLC

Blacksburg, Virginia
Safety, Industrial Hygiene - Injury, Illness, Product Liability, Premises Liability, Industrial Accidents, Warnings and Labels, OSHA, Worker's Compensation, Human Factors, Safe Equipment Design, Respiratory Protection, Respiratory Illness, Chemical Exposures, Dust, Asbestos, Silica, Lead, Temperature Extremes, Laboratory Safety
I am an associate professor of safety engineering and human factors engineering and the Director of the Healthy Work Design Laboratory in the Grado Department of Industrial and Systems Engineering at Virginia Tech in Blacksburg, VA. I hold MS and PhD degrees in safety engineering and the certified safety professional (CSP), certified industrial hygienist (CIH), and certified hazardous materials manager (CHMM) credentials. I have over 25 years of experience in the fields of industrial hygiene and safety engineering: conducting investigations and designing safe work systems. I led a compliance organization responsible for conducting investigations and ensuring compliance with safety and health standards (OSHA and EPA). I have 21 years of university teaching experience and have taught courses on occupational safety, industrial hygiene, risk control, and human factors engineering. My expertise is in the control of occupational health hazards and Prevention through Design. Prev...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

West Virginia
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...