OSHA Expert Witnesses

The SEAK Expert Witness Directory contains a comprehensive list of osha expert witnesses who testify, consult and provide litigation support on osha and related issues. Osha expert witnesses and consultants on this page may form expert opinions, draft expert witness reports, and provide expert witness testimony at deposition and trial. The issues and subjects these osha expert witnesses testify regarding may include: OSHA, Construction, Construction Safety, Fall Protection, Safety, Slip Trip & Fall, Accident Investigation, Machine Guarding, Human Factors, Premises Liability, Forklifts, Confined Space, Failure Analysis, Indoor Air Quality, and Risk Management.

Use the search box above to further refine your search for osha expert witnesses by keyword and state. Attorneys contact the experts directly – with no middleman.

Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM

Occupational Medicine, Industrial Hygiene - Toxicology, Mold, Indoor Air, OSHA, metals (arsenic, chromium, lead, mercury), ethylene oxide, ethylene dibromide, chemical exposure, Medical Standards, Workers Compensation, Firefighter, Law Enforcement Officer, Police Officer, Deputy Sheriff, Disability Evaluation, Return to Work, MD, CIH.
Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP). Certified Independent Medical Examiner (CIME). Medical Officer for the Federal Occupational Safety and Health Administration (OSHA). Member of the national committee that determines safe exposure levels to chemicals in the workplace (Threshold Limit Value Committee (TLV) of the American Conference of Governmental Industrial Hygienists (ACGIH)). Member of Scientific Review Panel for the Hazardous Substance Data Base (HSDB) maintained by the National Institutes of Health. Member of the national committees that develop medical guidelines for employment as a firefighter (NFPA 1582 Technical Committee) and a law enforcement officer (ACOEM LEO Medical Guida...

Michael P. Lawler, MS, CSP, ASP, CHST Safewit, Inc.

OSHA, Construction - OSHA, Construction, Fall Protection, Multi-Emplyer, Fall Prevention, Slips, Trips, Falls, Scaffold, Work Zone, MUTCD, Crane, Steel Erection, Excavation, Silica, Lead, Tunnel, Confined Space, MEWP, scissor lift, aerial lift, Struck by Equipment, back over, catastrophic injury, amputation, crush
Over 30 years as a safety executive and OSHA compliance manager, trainer, advisor, and leader on major construction projects throughout the USA. Expert at applying OSH Act of 1970 standards, regulations, policies, and Letter of Interpretation. Experience includes over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations. Expert at incident investigation, accident reconstruction, and injury management and investigation. Extensive experience and expertise in MUTCD Traffic Controls and rules. AREAS OF EXPERTISES INCLUDES: • Liability Assessment & Contractor Duty of Care • Accident Investigation & Root Cause • Aerial Lifts, MEWP • Construction Safety/Accidents • COVID Safety & Pandemic Management • Crane Safety, Critical Pick Planning, & Rigging • Disaster & Emergency Management • Dive/Underwater Operations • EM-385 U.S. Army Corps of Engineers • Excavation, Trenching, & Soil Mechanics • Slip, Trip, Falls, Stirs & Floor Safety Certi...

Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM

Alabama
Occupational Medicine, Industrial Hygiene - Toxicology, Mold, Indoor Air, OSHA, metals (arsenic, chromium, lead, mercury), ethylene oxide, ethylene dibromide, chemical exposure, Medical Standards, Workers Compensation, Firefighter, Law Enforcement Officer, Police Officer, Deputy Sheriff, Disability Evaluation, Return to Work, MD, CIH.
Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP). Certified Independent Medical Examiner (CIME). Medical Officer for the Federal Occupational Safety and Health Administration (OSHA). Member of the national committee that determines safe exposure levels to chemicals in the workplace (Threshold Limit Value Committee (TLV) of the American Conference of Governmental Industrial Hygienists (ACGIH)). Member of Scientific Review Panel for the Hazardous Substance Data Base (HSDB) maintained by the National Institutes of Health. Member of the national committees that develop medical guidelines for employment as a firefighter (NFPA 1582 Technical Committee) and a law enforcement officer (ACOEM LEO Medical Guida...

Lamar T. Hawkins, PE, JD PEG, Inc.

Birmingham, Alabama
Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.
PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

John W Ross Evidence Solutions, Inc.

Tucson, Arizona
Transportation, Oil and Gas - Commercial Motor Vehicle, HazMat, DOT, OSHA, Truck Accidents, FMCSR, FMCSA, OIL field, Propane, Driver Standard of Care, Loading, Unloading, Oversized loads, Electronic log compliance, Driver Hiring & Training, Hours of Service Issues, PI, Driver Qualification File, Clause 391.1,
Double / Triple Trailer Driving Experience • Electronic Log Expertise & Trainer • F.M.C.S.R. Trained & Certified • Licensed Private Investigator • Oil Field Heavy Trucking Experienced • Operation, Inspection & Maintenance of Tractor- Trailers • OSHA 10 & 30 Certified • Oversized Load Experienced • Propane & (HAZ-MAT) Hazardous Materials Certified Driver • Safety and Risk Management Consultant • Truck Driver Actions, Reactions, Responsibilities, Qualifications &Training • Ability to Pass & Maintain two-year DOT Medical Certificate

James Caylor, PE Caylor Engineering & Associates, PLLC

West Fork, Arkansas
Refrigeration, OSHA - Industrial process refrigeration, cold storage, ammonia, carbon dioxide, piping, insulation, design, design review, OSHA, EPA, mechanical code analysis.
I have 15 years' experience as a refrigeration contractor, followed by 18 years' experience as a graduate engineer in industrial refrigeration ammonia and CO2 applications up to 5,000 TR. My engineering experience includes design and project management positions with a D/B contractor, a large food processor, an A&E firm (Deputy Director of the Food & Beverage Group) and my current consulting business. I'm registered as a PE in 11 states and have an NCEES Record. Current committee service includes the International Institute of Ammonia Refrigeration (Standards-CM and Government Relations-VM) and the American Society of Heating, Refrigerating and Air-Conditioning Engineers (Std 15, TC 10.1, TC 10.3 and TC 10.5; VM on all). I have revised portions of chapter 2 in the 2014 and 2018 editions of the ASHRAE Refrigeration Handbook and am completing calculations of CO2 piping capacities in chapter 3. My work with the Refrigerating Engineers and Technicians Association includes vice pres...

Mark Clinton, MBA, ARM Decisive MGMT

NORTH LITTLE ROCK, Arkansas
Risk Management, Premises Liability - Zip-line, Slip Trip & Fall, Roofing, Electrical, OSHA, Risk Management, Amusement Ride Safety & Governance, Premises Liability, Life Safety, NFPA, ASSP, Worker's Compensation.
Mark Clinton, MBA, ARM, entering Colleges of Law MLS program (2018). Workplace accidents, Premises, General Liability. Qualitative Risk Management (1985-date), P & C Insurance loss control (1989-date), Arkansas Insurance Department, Risk Management Division, 1985-1989. Zipline Safety - Association of Challenge Course Technology (member) & Professional Ropes Course Association (member), familiar with ANSI & ASTM application and changes on waiver language using Kuchta v. Opco. OSHA authorized outreach trainer for construction & general industry since 2000. General contractor safety director, 2014-2016; experience in construction from general contractors to all subs. ASSE 25-year member & former chapter president. Highly experienced, educated, trained practitioner. Completed estimated 7,500 surveys & assessments for insurers including AIG, AmRisc, AmTrust, Berkshire Hathaway, CNA, Liberty Mutual, Berkley & XL Catlin. Assesses for range of risk using NFPA & OSHA standards & ...

MARTIN M BALABAN, PhD, PE AR TECH

Encino, California
Accident Reconstruction, Safety - Vehicle collisions, Premises liability including slip/trip & fall, Safety, Code Compliance, Construction & Industrial Accidents, Failure Analysis, Human Factors, Biomechanics, Mechanical Engineering, OSHA, ADA compliance, Products Liability, Criminal, Licensed Safety Engineer by State of California
Vehicular:
 all vehicle types, multi-vehicle, bicycles, pedestrians, skidmark analysis. damage-matching, occupant biomechanics. visibility & line-of-sight analysis, traffic signal phasing, vehicular component defects, seatbelts. Premises Liability: Code Compliance, Slip, trip, floor friction testing, stairway & ramp accidents, glass injuries, guardrails; illumination issues; manual & electronic gates, ladders, door closing mechanisms, falling objects, structural failures. Occupancies include single- and multi-family residences, retail stores, office buildings, garages, sidewalks, parks and other public access. Industrial & Construction accidents: Walking-working surfaces including ramps, hoisting & conveying, powered lifts, work platforms, forklifts, construction vehicles, materials handling & storage, machine guarding, ladders, scaffolding, trenching & shoring, Cal-OSHA compliance, lockout/tagout, IIPP analysis, human factors & ergonomics issues. Products Liability: Liabili...

Dr. Eric N Brown, CIH, CSP Indoor Environments

Los Angeles , California
Mold, Industrial Hygiene - Asbestos, Bad Faith, Construction Safety, Environmental, Ergonomics, Hazardous Materials, Human Factors Engineering, Industrial Hygiene & Mold, Landlord / Tenant, Lead Poisoning, Occupational / Environmental Health, OSHA, Safety, Wrongful Death
Dr. Eric N. Brown, CIH, CSP, is a Certified Industrial Hygienist (CIH) and a Certified Safety Professional (CSP), with both certifications in good standing with the issuing boards. Dr. Brown holds a Doctorate in Public Health with an Industrial Hygiene specialization from the University of California at Los Angeles, and a Master’s degree in Public Health with an Occupational Health specialization from the Medical College of Ohio. He has over 20 years of experience in: Health and Safety Industrial Hygiene Indoor Air Quality Exposure Assessments Heat Stress Litigation Support Dr. Brown has been a designated expert in hundreds of cases, been deposed dozens of times, and has testified successfully in both trials and arbitrations. His services are available to attorneys representing both plaintiff and defendant.

Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC Raising the Standard Consulting Inc.

California
Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer
Stanford R. Brown, B.Sc., CSP, CSHP, CRSP, CHSC, has over 30 years of experience managing safety and health for various projects. He has been involved with multiple construction safety/OSHA cases as an expert witness. A sampling of the expert witness cases he has been involved with include: • Workplace injury at refinery construction project. • Worker fatally electrocuted during a paving incident. • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii. Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/T...

Gary L. Buffington, MS, AA, BS, CSP, CRSP American Safety Consulting

Santa Clarita, California
OSHA, Construction - Accident Reconstruction, Personal Injury/Wrongful Death, Crane/Hoist & Rigging, Safety Training Plans, JHA/JSA, Confined Space, Fall Protection, Machinery Guarding, Ladders/Scaffolds, Forklifts/Scissor Lifts, Safety Codes/Regulatory Compliance, Audits, Mining, MSHA, HAZCOM, EM 385-1-1, ANSI
Mr. Buffington offers a unique combination of formal education, special training and project based technical experience in completing mega-projects valued at 20 billion dollars with over 12 million worker hours and safety statistics below half of the respective national averages and no fatalities. He is a CSP (US) & CRSP (Canada) by exam, licensed Private Investigator, former Federal Supervisory Special Investigator and MSHA federal Mine Inspector, Deputy Sheriff, Deputy Sheriff Criminal Investigator, approved OSHA 29 CFR Trainer Parts 1910 & 1926, approved MSHA 30 CFR trainer for surface & Underground coal and metal/non-metal mines. ASSE 2001 Safety Profession of the Year for Construction Practice Specialty & ASSE 2003 -2004 Safety Professional of the Year for Mining Practice Specialty.

Gary R. Coburn Restaurant Concept Innovations

San Juan Capistrano, California
Hotel & Restaurant, Slip Trip & Fall - Slip, trip & fall, burns, choking, food safety, dram shop, alcohol, negligent security, employee safety, commercial kitchen, customer injuries, operations, management, franchise, ownership, permitting, training, investing, accounting, premises liability, OSHA, ADA, procedures, equipment design.
Award-winning restaurant executive. Helped create, open, run, and advise hundreds of full-service restaurants, limited-service, quick-service, bars and nightclubs. Additional expertise in restaurant franchising and commercial kitchen design/build from remodels to ground up including conceptual development, viability, and business interruption. Over 40 years in the restaurant industry as owner, operator, franchisor, consultant, President, Chief Operating Officer, and General Manager of numerous restaurant and food service establishments. Experienced restaurant investor and developer. Active restaurant owner with consulting business developing restaurant concepts and turning around existing establishments. Concepts worked on include: Joe's Crab Shack, Cask ‘n Cleaver, Lord Charlie’s, El Gato Gordo, Pizza Pronto, Safari Bar Restaurant, Shark Club, Bull Dog Grill, Stronghouse, Pangea, The Ballroom, Juarez Grill, Dickerson’s Club 29, Yucatan Liquor Stand, Zepp’s Atomic Tex Mex, Cab...

Dennis A Colucci, Au.D, M.A., ABAC, FAAA Auditory Disorders and Balance Laboratory, Inc.

Dana Point, California
Audiology, Noise - Hearing Loss, Tinnitus, Hyperacusis, Vertigo, Acoustic Trauma, 3M, Airbag, Head Injury, Whiplash, Malpractice, ADA, Fitness for Duty, OSHA, Noise Exposure, Hearing Aids, Product Liability, MVA, Airplane Crash, Central Auditory Processing.
Forty-nine years of clinical practice in audiology, including 25 years in forensic audiology. Industrial consultant for Chevron (13 years), San Onofre Nuclear Generating Station (15 years), British Petroleum, Tesoro Petroleum, Conoco, Valero Petroleum, Amway, City of Los Angeles, Los Angeles County, and the City of Santa Ana. Over 250 industrial audiology evaluations and worker's compensation determinations. More than 65 plaintiff or defendant forensic cases in federal and state courts, including United Airlines, 3M, Petco Park, Union Pacific Railroad, Southwest Airlines, Geico, JFK University, the City of Newport Beach, the La Puente School District, San Diego USD, and more. In 1997, he was an Expert Witness for the State of California Licensing Board, and from 2012 to the present, he authored 52 educational journal articles for The Hearing Journal in clinical and forensic audiology. Teaching experience includes the American Academy of Audiology, the California Academy of Audi...

Peter Jaramillo, CIH Delta Bay Consultants, LLC

Antioch, California
Industrial Hygiene, OSHA - Industrial Hygiene, Health & Safety, Occupational Health, Indoor Air Quality, Biological Hazards, Chemical Hazards, Construction Safety, Valley Fever, COVID-19, Noise, Environmental, Laboratory Safety, Emergency Preparedness, OSHA, Certified Industrial Hygienist, Workers Compensation
Peter Jaramillo, CIH has 35+ years of experience in the fields of Occupational and Environmental Health & Safety. As co-owner and Principal Industrial Hygienist of Delta Bay Consultants, LLC, Peter provides the following services: (1) air & noise monitoring; (2) indoor air quality investigations; (3) health & safety programs; (4) hazard/risk assessments; (5) ergonomics surveys; (6) assessments of work practices, engineering controls, personal protective equipment, and emergency preparedness; (7) confined space and ventilation evaluations; (8) employee training/mentoring; (9) acting as a technical resource, subject matter expert, and regulatory liaison; and (10) Expert Witness Testimony and other Litigation Support on legal claims related to occupational health & safety. Peter has provided expert witness services for numerous cases involving exposures to Coccidioides immitis (the "Valley Fever" pathogen) in the Central Valley of California. He has also supported various cases invol...

Jerry P Purswell, Ph.D., P.E., CPE Purswell & Purswell, Ergonomics & Safety Consulting

Colorado Springs, Colorado
Human Factors, OSHA - Warnings Design & Testing , OSHA, Product Safety, Industrial Safety, Chemical Safety, HazComm & FHSA labeling requirements, Electrical Safety, Construction Safety, Fall Protection, Personal Protective Equipment, Consumer Product Safety, Human Factors, Perception-Reaction time, Backup Alarm
Dr. Purswell is a Registered Professional Engineer and a Certified Professional Ergonomist. He has designed and tested on-product warning labels as well as product instructions for consumer and for industrial products. He has published several papers on the use of OSHA's "General Duty" clause to cite employers for ergonomics hazards. He has also published several papers evaluating the effectiveness of backup alarms. With his CSU-Pueblo students, he has published papers on hazard analyses of consumer and industrial products. Dr. Purswell has performed usability testing on medical devices, including developing the test protocols and conducting usability testing with different populations. Dr. Purswell & his co-authors were named as Finalists for the 2014 Health Devices Award Achievement by the Emergency Care Research Institute. Dr. Purswell has been retained by attorneys around the US to evaluate the ergonomics and safety aspects of matters in litigation. He has testified at trial in...

Steven R. Sawyer, ARM, MS, CSP LSW & Associates Safety Consulting Services, LLC

Pueblo West, Colorado
OSHA, Safety - Grain Bin Engulfment, Lockout/Tagout, Machine Guarding, OSHA Regulations, Grain Augers/Belt Conveyors, Industrial Accidents, Skid-steer Loaders, Forklift, Front End Loaders, Agricultural Equipment Operations, Telehandlers, Confined Spaces
Board Certified Safety Professional (CSP) with a Master’s Degree in Safety Management and an Associate of Risk Management (ARM). Twenty years- experience as a safety consultant working with clients in General Industry and Agribusinesses to prevent incidents and protect workers. Speaker at state safety conferences and trade associations. OSHA Authorized General Industry Trainer for 10 and 30 Hour courses. Ives certified trainer for forklifts, telehandlers, skid-steers, front end loaders, back hoes, boom lifts and scissor lifts. Conducted fatality and catastrophic incident investigations for clients to determine cause of incidents. Audited client’s safety programs to determine compliance with government regulations and determine areas for improvement. Assisted clients with OSHA inspections and citation abatement. Assisted clients with safety program development and conducted safety training. Trained workers where English is a second language. Professional member o...

Robert M Traynor, EdD, MBA, FNAP Robert Traynor Audiology, LLC

Fort Collins, Colorado
Audiology, OSHA - Audiologist, Hearing, Tinnitus, Hyperacusis, Air Bag Deployment Hearing Injury, Hearing Aids, Hearing Aid Fitting Techniques, Hearing Handicap, Tinnitus Handicap, Worker's compensation, CAOHC Certified Occupation. Hearing Loss, Audiometric Assessment, Audiology Malpractice. Hearing Product injury.
46 years of clinical practice in audiology, hearing industry consultant, trainer, professor, conference speaker, practice manager, author and former military audiologist. 50 years teaching courses and training clinicians within the field of audiology with specific emphasis in hearing loss, tinnitus rehabilitation, noise induced hearing loss. Adjunct Faculty in Audiology at the Rush University, Chicago, IL; Salus University, Elkins Park, PA; and The University of Arkansas for Medical Sciences, Little Rock, AR. Experience includes: • Clinical Audiology - Hearing Assessment - Hearing Rehabilitative Treatment, Hearing Aids, Hearing Conservation, • Tinnitus Treatment and Rehabilitation (Since 1978) • Former Member, Board of Directors, American Tinnitus Association Member, Forensic Expert Witness Association • Hearing Instruments, Hearing Instrument Fittings, Professional Selling techniques, Hearing conservation, Former Army Audiologist • Air bag deployment and Hearing/Tinnitu...

Chip Darius, OHST, CIT, CSHO, CUSP Safety Priority Consultants, LLC

Cromwell, Connecticut
OSHA, Safety - forklift, slip trip fall, machine guarding, amputation, material handling, rack, aerial lift, boom lift, scissor lift, work zone, traffic, flagger, scaffold, ladder, lockout/tagout, Emergency Medical Services, mobile elevating work platform, excavation, railroad, MEWP, occupational safety & health
Retained in over 370 cases, state and federal. Deposition and trial testimony for matters in over 20 states. 30+ years experience in safety & health and OSHA compliance consulting & training for industry, construction, utilities, and emergency services. Frequent speaker at conferences and seminars - international, national, regional, state and local. Instructor for OSHA Training Institute Region 1 Education Center and Adjunct Faculty at Keene State College over 20 years, teaching OSHA standards & policies, technical topics, accident/incident analysis, and outreach trainer courses for both construction and general industry. Lead instructor for fall protection and scaffold courses. Safety Professional of the Year, Associated General Contractors of Connecticut, 2022. Authorized OSHA Outreach Trainer for both construction and general industry. ATSSA Master Instructor. Experienced in: Personal injury, catastrophic injury and fatality cases; Occupational safety & health regulations,...

Craig L Moskowitz, PE, MBA, MS CLM Engineering Associates, LLC

Stamford, Connecticut
Premises Liability, Construction Defects - OSHA, construction, slips/trips/falls, storm damage, water intrusion, roofing systems, warranty inspections, civil engineering, structural engineering, building collapse, property condition assessment, building codes, forensic engineering, engineering expert, construction accidents, personal injury
Since 2010, the President and Managing Member of CLM Engineering Associates, LLC, which concentrates its focus on forensic engineering/expert witness work for the insurance industry and legal community. In addition, we offer construction management, civil engineering and building inspection services. Prior experience includes extensive construction management work on both commercial and residential projects. Performed safety inspections on both civilian and military projects through application of OSHA regulations. Designed drainage systems for the government while an officer with the United States military. Cost estimating for various projects exceeding $500 million. Design document creation and management of high-rise construction in Manhattan. marketplace. Management of telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating. Directed and managed all water distribution system and sewer system work while working as a contractor to th...

Janine McCartney, Ph.D, MBA, CSP, CHST HHC Safety Engineering Services, Inc.//HHC Safety Consulting Services, Corp.

Wilmington, Delaware
Safety, Oil and Gas - Oil & Gas, Pipeline, Electrical, Safety Engineering, Arc Flash/NFPA 70E, OSHA, Accident Investigation, Falls, Equipment, Machinery, Accident Reconstruction, Construction, Industrial Plants, Worker's Compensation, Safety Inspection, Safety Management, Training, Employee, Workplace Safety, Toxic Tort.
Dr. Janine McCartney is a Safety Engineer with designation as a Certified Safety Professional, Construction Safety and Health Technician, Registered Professional Industrial Hygienist, and Certified Safety Instructor (Master's Level). Dr. McCartney has held Management safety positions and a Safety Officer II position with OSHA Consultation. She worked for 11 years in the oil & gas industry and pipeline industry on large multi-state pipeline construction projects and as an exploration geologist (onshore and offshore). Dr. McCartney has taught for Texas A&M-Texas Engineering Extension as Adjunct Faculty and teaches the OSHA 10 and 30 hour General Industry and Construction courses for OTI. Her career spans 40 years. Please see her two podcasts on AM Best about Ghostwriting: What an Expert should never allow and Wrongful Expert Designations: What Claims Examiners should know-April 2022. Awards: 2022-2017 AM Best Service Provider, Editorial Staff of Science of the Total Environment, He...

Richard W Carr, PhD, CDS R W Carr, Inc.

Jacksonville, Florida
Transportation, Safety - FMCSA, FMCSR, DOT, OSHA, Tank Truck, Loading, Unloading, Forklifts, Driver Qualifications, Drug & Alcohol, Hours of Service, Hazardous Materials, Training, Standard of Care, Vehicle Inspection, Fleet Safety, Commercial Drivers, CDL, Driver Hiring Standards, Record Retention, ELD, Cargo, Accidents
Richard W. Carr is the principle of R W Carr, Inc., a Risk Management & Safety Consulting company based in Jacksonville, FL. which primarily serves the transportation industry, insurance industry and the legal profession. Mr. Carr has been Operations Manager – Transportation for Olin Chlor Alkali Products, Inc. in which he oversaw a private fleet of tractor trailers delivering hazardous materials throughout the western United States until June 2014. Prior to this he was Director of Risk Management, Safety & Health for Masco Contractors Services, Inc.; a nationwide company employing as many as 20,000 employees at 350 facilities and operating up to 10,000 motor vehicles. Prior to this he was Managing Director of Transurance Risk Retention Group, Inc. and Phoenix Risk Services, Inc., an Arizona licensed Risk Retention Group and a third-party claims administrator respectively whose specialty was commercial motor vehicle fleets. Prior to this, he was Vice President-Safety & Risk Man...

Clinton J. Ford, M. Sc. ACA, CGC, CIE, CMR, CRMI Advanced Building Consultants

Alachua, Florida
Construction, Environmental - Appraisal & Valuation, Arbitration/Mediation, Building Inspection, Construction, Construction Defects, Environmental, Indoor Air Quality, Mold, OSHA, Premises Liability, Safety, Slip Trip & Fall
Clinton J. Ford M.S… is the President and founder of Advanced Building Consultants. Having been in the industry for over 30 years, he is a recognized expert in Construction, Environmental, and Walkway Safety analysis. Ford’s exemplary casework displays his investigative prowess in a vast variety of claim topics. Using up-to-date technology combined with his elite knowledge of building codes, standards, and statutes, Ford is consistently able to present analysis and witnessing that can be described as nothing but expert. Ford’s additional services and certifications are displayed below: Insurance: ACA - All Lines Independent Claims Adjuster Florida 520 Licenses #087209 since 2004 Florida Unaffiliated General Lines Property & Casualty Insurance Agent 2-20 License #A087209 since 2011 National Flood Insurance Program Claims Adjuster – Cert. Number 30003330 Georgia Insurance Non-Resident Casualty & Property Adjuster #763839 IAUA Certified Property Appraiser & Umpire (CPAU) Xactimate Es...

Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM

Orlando, Florida
Occupational Medicine, Industrial Hygiene - Toxicology, Mold, Indoor Air, OSHA, metals (arsenic, chromium, lead, mercury), ethylene oxide, ethylene dibromide, chemical exposure, Medical Standards, Workers Compensation, Firefighter, Law Enforcement Officer, Police Officer, Deputy Sheriff, Disability Evaluation, Return to Work, MD, CIH.
Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP). Certified Independent Medical Examiner (CIME). Medical Officer for the Federal Occupational Safety and Health Administration (OSHA). Member of the national committee that determines safe exposure levels to chemicals in the workplace (Threshold Limit Value Committee (TLV) of the American Conference of Governmental Industrial Hygienists (ACGIH)). Member of Scientific Review Panel for the Hazardous Substance Data Base (HSDB) maintained by the National Institutes of Health. Member of the national committees that develop medical guidelines for employment as a firefighter (NFPA 1582 Technical Committee) and a law enforcement officer (ACOEM LEO Medical Guida...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Florida
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Alex LeBeau, PhD, MPH, CIH Exposure Assessment Consulting, LLC

Orlando, Florida
Industrial Hygiene, Toxicology - Indoor Air Quality, Exposure risk, Risk Assessment, Legionella, Legionnaires disease, PFAS, Environmental Science, Building science, Mold, Bacteria, Dose Assessment, Heavy Metal, Risk, Pesticide, PCB, Food, Waterborne Pathogens, Product Safety, OSHA, Antimicrobial
Problem solving Certified Industrial Hygienist (CIH) with over 16 years of experience evaluating environmental and occupational exposures to chemicals and biological agents (e.g., bacteria) from the industrial hygiene and toxicology perspective. History of performing human health risk assessments at contaminated sites using U.S. EPA and state regulatory guidelines and monitoring remediation activities at those sites enabling me to analyze risk and determine if any workers or residents would be impacted by residual contamination and/or remediation activities. I perform indoor environmental quality assessments to evaluate exposure impacts on building occupants - including Legionella and water quality assessments - at healthcare, residential, commercial, and industrial facilities as part of the comprehensive overall building science aspect of indoor environmental quality. Experience co-authoring industry guidance on COVID-19 and presented on COVID-19 at a number of conferences as an...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Georgia
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Stanford R Brown, B.Sc., CSP, CSHP, CRSP, CHSC Raising the Standard Consulting Inc.

Honolulu, Hawaii
Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer
Stanford R. Brown, B.Sc., CSP, CSHP, CRSP, CHSC, has over 30 years of experience managing safety and health for various projects. He has been involved with multiple construction safety/OSHA cases as an expert witness. A sampling of the expert witness cases he has been involved with include: • Workplace injury at refinery construction project. • Worker fatally electrocuted during a paving incident. • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii. Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/T...

Adam K Aleksander, PhD, PE, CSP Aleksander & Associates P.A.

Boise, Idaho
Human Factors, Products Liability - Warnings, Labels, Reconstruction, Visibility, Failure Analysis, Forensic Engineering, Defects, Photogrammetry, Metallurgy, Human Factors, Ergonomics, Construction, OSHA, Safety Engineering, Product Liability, Equipment Failures, Industrial Accidents, Power Utility Accidents, Insurance Claims
Specific Cases: Go cart nip point fatality, washing machine amputation, amputations in punch presses, hydro-pneumatic tank explosion, agricultural truck amputation, airport conveyors, biscuit cutter, amusement rides, water-jet fatality, slips & trips, lead rope snap, exercise machine failures and injuries, document burn injuries, folding chair collapse, concrete anchor system, nail gun injury, prosthesis bolt failure, steam iron electrocution, pool light burn, design of warnings and instructions, ATV rollover, automotive failures and crash related phenomena, measurement of ECDs (TASER®) Farm equipment, failed engines, mining conveyors, power plant systems, belt conveyors, potato processing system, sewer line, tire shredder processing analysis, failed brake die, failed conveyor bearing, RV axle repair failure, trailer suspension system failure, trailer separation, dump truck telescoping cylinder failure, brake system, headlight filament analysis, service station gasoline tank leak, b...

Michael J Kalinowski, CSP,MBA, CHST, CRIS

Gilberts, Illinois
Construction, OSHA - Insurance, Legal, Safety
Highly qualified and well rounded expert opinion is supported by nearly 14 years experience in the specialized field of construction, incident investigation and general OSHA litigation. Association of General Contractors Safety & Health Committee Member Certified Safety Professional (CSP) Construction Health & Safety Technician (CHST) Construction Risk & Insurance Specialist (CRIS) Many additional Safety certifications available upon request. Worked with construction general contractors for 14 years and have in-depth experience with Federal OSHA litigation. Experienced with fatality investigations, OSHA inspections.

Michael P. Lawler, MS, CSP, ASP, CHST Safewit, Inc.

Orland Park, Illinois
OSHA, Construction - OSHA, Construction, Fall Protection, Multi-Emplyer, Fall Prevention, Slips, Trips, Falls, Scaffold, Work Zone, MUTCD, Crane, Steel Erection, Excavation, Silica, Lead, Tunnel, Confined Space, MEWP, scissor lift, aerial lift, Struck by Equipment, back over, catastrophic injury, amputation, crush
Over 30 years as a safety executive and OSHA compliance manager, trainer, advisor, and leader on major construction projects throughout the USA. Expert at applying OSH Act of 1970 standards, regulations, policies, and Letter of Interpretation. Experience includes over 50 OSHA inspections and associated negotiation and defense preparation related to OSHA citations. Expert at incident investigation, accident reconstruction, and injury management and investigation. Extensive experience and expertise in MUTCD Traffic Controls and rules. AREAS OF EXPERTISES INCLUDES: • Liability Assessment & Contractor Duty of Care • Accident Investigation & Root Cause • Aerial Lifts, MEWP • Construction Safety/Accidents • COVID Safety & Pandemic Management • Crane Safety, Critical Pick Planning, & Rigging • Disaster & Emergency Management • Dive/Underwater Operations • EM-385 U.S. Army Corps of Engineers • Excavation, Trenching, & Soil Mechanics • Slip, Trip, Falls, Stirs & Floor Safety Certi...

Andy Nieto, CSP, CHST Safety Litigation Services LLC

Saint Charles, Illinois
Safety, OSHA - Safety Liability Expert, Construction Safety, Industrial Safety, Multi-Employer work site, OSHA regulations, Accident investigation, Cranes and Rigging, Electrical, Lock out/Tag out, Trenching and Excavation, Ladders/Stairs, Slips, Trips, Falls, Confined Space, Fall Protection, Welding, Demolition
Mr. Nieto is a Certified Safety Professional (CSP) and Construction Health and Safety Technician (CHST). His work is performed in support of safety liability matters pertaining to both the construction and industrial sectors. He has investigated, analyzed, and prepared professional opinions in over 350 safety matters, and has offered testimony on over 70 occasions in jurisdictions nationwide.

William G Switalski, PE Switalski Engineering

Des Plaines, Illinois
Mechanical Engineering, Equipment & Machinery - Cranes & Hoists, Printing & Packaging Equip, Bowling Machinery, Agricultural Equip, OSHA, Machinery Maintenance Practices, Conveyors, Hand & Power Tools, Ladders, Workplace Safety, Slip Trip & Fall, Premises Liability, Safety, Warnings & Label Evaluation, Metalworking Equip, Aerial Work Platforms
I have served on the ANSI A14 Ladder Safety Committee since 1995 and currently Chair the Mobile Ladder Stands and Mobile Ladder Stand Platforms Sub-committee. In addition, I serve on the Executive committee which reviews and votes on all ladder-related standards in the A14 family, the A14 Steering Committee, the Labeling Task Force and the Ladder Accessories Sub-committee. I have an extensive background in the Bowling Industry having served my Mechanical Engineering internship with the Brunswick Corp. Automatic Pinsetter division. I have also had ownership interest in two Chicagoland bowling centers. I have performed mechanical and electrical maintenance on Automatic Pinsetters since 1974 in addition to having provided instruction to several dozen apprentice mechanics in the operation of the Pinsetter and related bowling equipment and continue to do so today. I continue to provide expert witness and consulting services to both major bowling equipment manufacturers including Bru...

Kevin L. Trangle, MD,MBA Kevin Trangle & Associates

Illinois
Occupational Medicine, Environmental - Addiction Medicine, Chemistry, Chemicals, Preventive Medicine, IME, Indoor Air Quality, Internal Medicine, Toxicology, OSHA, Disability Evaluation, Engineering-Biomedical

Stephen (Steve) Yates, CHST UpVantage Strategies, LLC

Bolingbrook, Illinois
Safety, OSHA - National, Chicago, Illinois, Michigan, Atlanta, Georgia, Charlotte, North Carolina, Commercial and Residential Construction, Manufacturing, Industrial, Multi-Employer Worksite, Machine Guarding, Metal Coil Processing Welding and Fabrication, Precast Concrete, Food Processing and Manufacturing
Over 24 years of experience as a workplace safety consultant, trainer, conference speaker and educator. Expert in applying the Occupational Safety & Health Act (OSHA) regulations and policies to worker safety, assisting over 450 companies nationally across most construction trades and heavy manufacturing. Services provided include regulatory compliance gap analysis, program and safety management system development, incident and injury investigation including slips, trips, falls, amputations, and fatality, OSHA inspection management, workplace inspection, and training. Also frequently providing strategy and coaching to top management regarding management systems and leadership. An experienced expert, retained to provide litigation support as expert or fact-based analysis.

Randy Gray, CHST, CSHM, GSP, OHST, BS, MS Grayhawk Advantage, Inc., dba. Grayhawk Safety & Health Consulting Company

Benton, Kentucky
OSHA, Safety - OSHA, Industrial Accidents, Safety, Industrial Hygiene, Loss Control, Risk Management, Slip Trip & Fall, Construction Accidents, Manufacturing Accidents, Insurance, Investigations
Mr. Gray provides expert witness services in defense and plaintiff litigation matters, safety and health on-site audits, customized OSHA safety and health training, OSHA 10 and 30-hour construction and general industry training, and assistance for employers who have been issued citations that they need assistance with obtaining better citation settlement agreements and working in conjunction with legal counsel with litigation assistance contesting OSHA citations. Highly-experienced OSHA Forensic Expert Witness with 75 separate fatality and more than 150 non-fatal work-related accidents. 25+ years of OSHA compliance with 29 CFR regulations related to construction and general industry. 8 years of private Safety and Health Consulting specializing in Defense and Plaintiff's occupational injuries, conducting safety and health audits, Authorized OSHA Outreach Trainer for construction and general industry, and employer assistance with settlement of OSHA citations, and testifying in O...

Bart J Leist, CSP Triad Safety

Louisville, Kentucky
Safety, OSHA - Safety Programs, safety training, Lockout, tagout, Machine Guarding, Fall Protection, Fall Prevention, Respiratory Protection, Personal Protective Equipment, Powered Industrial Trucks, Forklifts, Aerial Lifts, Scissor Lifts, Working at Heights, General Industry, Construction, and Manufacturing.
SEAK Certificate of Completion for Running an Expert Witness Practice. Certified Safety Professional. 34 years in safety & health management. 22 years in safety consulting. Authorized OSHA Construction Outreach Trainer. United States Marine Corps Reserve, Retired, Rank of Major. Marine Corps Infantry Officer. Safety Director at Colgate-Palmolive. Safety Specialist at Phillip Morris. Started Compass Safety providing safety consulting services for next 20 years. Developed and help implement numerous safety programs. Experienced in conducting OSHA type audits, accident investigations, safety inspections, safety training and Safety Director duties and responsibilities.

Doug Rush, CIH, CSP, CHMM, SMS, OHST, REPA,MSc, Scopus Consultants, Inc.

Louisiana
Industrial Hygiene, Safety - CIH, CSP, CHMM, Covid, Indoor Air Quality, Toxicology, Asbestos, Environmental, Mold, Legionella, Pesticides, Dermal Assessment, Exposure, Occupational Hygiene, COPD, Forensic Science, Environmental Engineering, Job Hazard Assessment, OSHA, Safety, Warnings & Labels, Products Liability, IAQ
Summary of Experience I am a Certified Industrial Hygienist (CIH), Certified Safety Professional (CSP), Certified Hazardous Materials Manager (CHMM), Safety Management Specialist (SMS), EPA Nationally Qualified Asbestos Consultant, Licensed Asbestos Consultant, and Hazmat Expert. I help clients with a whole range of health, safety, and environmental challenges, and I have a specialty in industrial hygiene including forensic analysis and testimony associated with current and past exposures to chemical, biological, and safety related injuries and illnesses. My experience encompasses the leadership and management of teams of Health, Safety and Environmental (HSE) experts including industrial hygienists, safety professionals, environmental engineers, medical doctors, nurses, and technicians in workplace incidents and exposures to industrial chemicals and substances such as asbestos, benzene, welding fumes, lead, mold, pesticides, among others. My accomplishments include participation ...

H. Landis "Lanny" Floyd II, PE, CSP, CESCP, CUSP, CMRP, CRL, Life Fellow IEEE Electrical Safety Group Inc.

Elkton, Maryland
Electricity, Safety - workplace electrical safety, arc flash, electrical safety management, electrical codes & standards, NFPA70E, National Electrical Code, electrical injury, electrocution, electrical reliability, electrical maintenance, electrical construction, occupational electrical safety, OSHA, NESC, electric shock
I am an expert, author, speaker, and educator in occupational electrical safety. I received my BSEE from VA Tech in 1973. My 45+ year career with DuPont focused on electrical safety in the construction, operation, and maintenance of DuPont facilities worldwide. My responsibilities included improving management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance in all DuPont operations. I have published more than 90 peer-reviewed papers and magazine articles on occupational electrical safety. I have received awards from leading institutions recognizing my work to advance the practice of electrical safety. I am an adjunct faculty member in the graduate school of Advanced Safety Engineering and Management (ASEM) at the University of Alabama at Birmingham (UAB). At UAB, I teach Prevention through Design, Engineering Ethics, and Electrical Systems Safety which I developed for the ASEM curriculum. I am an IEEE Life ...

Tara L Pase Bramel Engineering, LLC

Tracys Landing, Maryland
Structural Engineering, Civil Engineering - Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis
Civil/Structural Engineering Construction Defects Building Codes OSHA Failure Analysis Strength of Materials Concrete/Steel/Wood/Masonry Design Concrete/Steel/Wood/Masonry Analysis Seismic Design and Analysis Wind Design and Analysis Foundations and Retaining Structures Grading and Soil Properties Field Repair Designs Stormwater Management Component/Connection Design and Analysis Construction Cost Estimates Building Envelope (Moisture Barriers) Construction Management Registered Professional Engineer, State of New York, License No.087752 Registered Professional Engineer, State of Maryland, License No.42640 Registered Professional Engineer, Commonwealth of Virginia, License No.051210 Registered Professional Engineer, State of New Jersey, License No.24GE05239300

Scott K. Blair Sure Step New England

Hudson, Massachusetts
Slip Trip & Fall - Slip and Fall, Dynamic Coefficient of Friction Testing re: Friction Resistance per the American National Standards Institute (ANSI), Tile Council of North America (TCNA),(OSHA),(ADA), Interior/ Exterior Testing.
Retired State Trooper, Certified Walkway Safety Auditor with a primary focus on slip and fall litigation. My specialty is performed through the science of Tribometry, the measurement of friction on a hard surface. This is performed through the use of a binary output tribometer known as the BOT3000E. My services help analyze case specifics in accordance to the (ANSI) American National Standards Institute A326.3-21. <<<<PLEASE-EMAIL-ME-DIRECTLY-FOR-IMMEDIATE-CONTACT@>>>> (([email protected] or 508-365-8050))

Thomas I. Fitzgerald, Esq.

Merrimac, Massachusetts
Transportation, Accident Reconstruction - Trucking, Trucks, Commercial Vehicles, Truck Safety, Overweight, size, weight restrictions, hazardous materials, compliance, fatigue, work zone, distracted driving, cargo tank, impaired driving, rollovers, Data Q, DOT, Driver qualifications, OSHA, loading, Commercial Vehicle, tank truck, CMV, speed
Thought leader on trucking and commercial vehicle safety and accident reconstruction. Lieutenant and Commanding Officer, Massachusetts State Police Commercial Vehicle Enforcement Section (2010-2022). Certified accident reconstructionist. Licensed attorney. Experienced expert and fact witness.

Mark Franklin Cove Acre Corp

Somerset, Massachusetts
Safety, OSHA - Construction Safety, General Industry Safety, Hazardous Waste Operations and Emergency Response, Confined Space Entry, Fall Protection, Slips, Trips, and Falls, Hazard Communication (Chemical), Fork Lift, Respiratory Protection, Machine Guarding, Aerial Lift Safety, Roofing Safety
Highly experienced workplace safety professional and trainer. Over 6,000 hours of teaching experience - covering more than 40 topics related to job safety. Investigated over 150 incidents including serious injuries, chemical spills, and equipment and facility damage. Twenty-five years of experience as an Environmental, Health, and Safety Manager in manufacturing, chemical, and construction industries. OSHA Training Institute (OTI) authorized trainer since 2005. Training topics include OSHA safety topics, chemical emergency response, shipping hazardous materials, powered industrial trucks, and aerial lifts. Experienced in industrial and construction incident investigation conducting initial investigation and root cause analyses for over 150 incidents including worker injuries, chemical spills, and equipment and facility damage.

Ahmed Jalil Al-Bayati, PhD, PE Lawrence Technological University

Southfield , Michigan
OSHA, Construction - Construction Safety, OSHA, Subsurface Utility Engineering (SUE), Underground Utilities, Damage Prevention, call before you dig, Multi-Employer worksite, General Duty Clause, OSHA 1926, Construction Safety Culture, One Call center
With more than 20 years of experience in the construction industry, as a practitioner and a professor, I have also had the privilege of speaking at conferences and authoring articles in respected national and international peer-reviewed journals. My work has been cited more than 700 times as of June 2023. My expertise lies in two areas: • Construction worker safety, specifically in multi-employer worksites & ANSI/ASSP A10.33-2020, OSHA 1926 regulations, the general duty clause, Manual on Uniform Traffic Control Devices (MUTCD) Part 6 (temporary traffic control), the Hispanic construction workforce, Duty of Care, Common Work Area Doctrine, excavation safety, construction Safety culture, and Retained Control Doctrine. • Sub-surface utility management, where my focus is on damage prevention laws, the investigation process for utility strikes or damages, and Subsurface Utility Engineering (SUE). In 2021, I published a book in collaboration with Mr. Louis Panzer, the director of North...

James M. Miller, PE, PhD J.M. Miller Engineering, Inc.

Ann Arbor, Michigan
Safety, Agriculture Engineering - Accidents, Auto ADAS, Agriculture, Battery Fires, Cannabis Processing, Chemical Exposure, Child Safety, Construction, Electrocution, Ergonomics, Fitness Equip, Fires/Explosions, HazCom, Human Factors, HVAC, Mechatronics/Nano, Medical Devices, OSHA, Recalls, RV/ATV, Slip/Fall, Vapes, Warnings/Label
There are four PhD and registered Professional Engineers at Miller Engineering who are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. These co-founders and associates are James M. Miller, PE, PhD; Mark R. Lehto, PhD; David R. Clark, PE, PhD; Adam M. Olshove, PE, MSE; and Jeffrey D. Rupp, MSE. Miller Engineering has a dedicated office with a full-time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise includes the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering. Miller Engineering’s principle engineers wrote the original books on warnings and instructions, have published in several other areas, have participated in product designs and patents, and have analyzed, reconstructed and/or animated numerou...

Ronald K. Tyson Tyson Enterprises, LLC

Ortonville, Michigan
Building Inspection, Construction - Construction Defects, Demolition, Failure Analysis, OSHA, Plumbing, Premises Liability, Products Liability, Safety, Slip, Trip & Fall

Gregory G. Zigulis, BSCE, MBA, CIH, CSP Sixth Sense Safety Solutions

Rogers City, Michigan
Safety, OSHA - Multiple industry safety experience, OSHA, safety & health, serious injury and fatal injury prevention, occupational fatalities, falls, machine guarding, ladder, multi-employer worksite, construction, training, silica, industrial hygiene, respiratory protection, safety management systems, auditing
38 years of occupational safety, health (including industrial hygiene), and environmental management experience within several industries. This includes roles as an Air Force Bioenvironmental Engineering officer (final rank of Captain, with industrial hygiene and environmental responsibilities), regional Occupational Health and Safety (OHS) management for a hazardous waste cleanup company, OHS management for a Prime Contractor to the Department of Energy (Oak Ridge, TN), construction safety and construction fatality research for the University of Tennessee under contract to the Department of Labor/Occupational Safety and Health Administration (OSHA), OHS management for a consumable dental supplies and metals related manufacturing/machining company, OHS management for an international gas engine manufacturer within a global automotive manufacturer, regional environmental, health and safety (EHS) management and global safety team member for a Tier 1 auto parts manufacturer, regulatory...

Richard J (Rick) Larkin, MA, CEM® Larkin and Associates, LLC DBA Beacon Safety Services

Edina, Minnesota
Emergency Preparedness, Safety - Emergency Plans, OSHA, Workplace Safety, Incident Inv., Disaster, Incident Mgt, Crisis Mgt, Emergency Procedures, Special Event Emergency Response, Incident Command System, Failure to Plan, Evacuation, Hazard Analysis, Negligence, Emergency Services, Major Event Emergency Operations, Preparedness
I am a Certified Emergency Manager® (CEM), awarded and recognized by the International Association of Emergency Managers (IAEM) and am able to translate “theory-to-practice”; while relying on my numerous years of experience and knowledge of complex industry standards to provide clear, understandable and practical assessment and advice. I am currently a certified Emergency Medical Technician - Basic, following 33 years as a certified Paramedic. Over 35 years experience in emergency services operations and management, (Fire/Rescue, Emergency Medical Services, Emergency Preparedness/Disaster Management). Hundreds of emergency responses to fires, rescues, emergency medical, and critical incidents. Significant involvement in major disaster response, training and exercises. Broad experience in planning and preparedness for large-scale planned events and event operations coordination ranging from a multi-day State Fair with 1 million attendees, to civil unrest, and sporting events. Nu...

Lamar T. Hawkins, PE, JD PEG, Inc.

Mississippi
Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.
PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Christopher E. Janson, MS, CSP, CHMM Haines, Janson & Associates LLC

St. Louis, Missouri
Safety, Premises Liability - Engineering, Products Liability, Slip, Trip & Fall, Retail Safety, Equipment & Machinery, Human Factors, Slip Resistance, Accident Investigation/Reconstruction, OSHA, Guarding, Failure Analysis, Construction, Industrial & Premises Accidents
Haines, Janson & Associates provides safety and risk management consulting services. Christopher E. Janson, Board Certified Safety Professional (CSP); Certified Hazardous Materials Manager (CHMM); Certified User of the English XL slip resistance measuring device (CXLT). Mr. Janson has held safety management positions with several Fortune 500 companies. He has also worked with a variety of firms as a consultant for the insurance industry. Mr. Janson is a professional member of the American Society of Safety Engineers.

Joe Monaco Monaco Group, Inc.

Martinsville, New Jersey
Safety, OSHA - Forklifts, Forklift Training, Content Validation (Test/Evaluation), Forklift Safety, Accident Reconstruction, Forklift Expert, Forklift Operating Standards, Forklift Operator Management, Forklift Certification, Powered Industrial Trucks, ANSI B56.1, OSHA 1910.178
33 years experience in forklift (powered industrial trucks) safety, OSHA, and performance management consulting. Speaker at international, national, state, and local conferences and seminars. Author of forklift focused articles and presentations emphasizing both forklift safety and productivity. Co-author of a chapter in a university text book addressing human performance technologies: Chap 4, “Solve the Problem…So it STAYS solved”. Performs accident reconstruction by reverse engineering probable behavior of the parties.

Cheryl Scanlon-Zinner, CSP Safety Research, Inc.

Audubon, New Jersey
OSHA, Safety - Fall Protection, Construction, Construction Safety, Industrial Safety, Slip/Trip/Fall, Construction Accidents, Scaffold safety, Ladders, Ladder Safety, Trenching & Excavation, Excavation Safety, Trench Safety, Power Tools, Forklifts, Powered Industrial Trucks, Standard of Care, Machine Guarding
Cheryl Scanlon-Zinner is a board-certified safety professional with over twenty-five years of experience developing and implementing occupational safety programs in construction and general industry for employers, corporations and government agencies. She has trained thousands of management representatives, supervisors, and competent persons on the principles and practices of safety management, hazard identification, hazard evaluation and the implementation of the hierarchy of controls. She specializes in hazards that are likely to cause serious injuries and fatalities (SIFs), including falls from elevation, and other construction hazards, machinery hazards, forklifts, and ladders. She was the technical editor of Nigel's Ellis's textbook Introduction to Fall Protection. Cheryl is a member of several professional safety organizations. She was the president of the Philadelphia chapter of the American Society of Safety Professionals and is active in that organization. She was award...

Amin Terouhid, Ph.D., PE, PMP, CFE Adroit Consultants, LLC

Upper Saddle River, New Jersey
Construction Defects, OSHA - Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, concrete inspection, standard of care, construction simulation and modeling, construction inspection, loss of productivity, critical path method (CPM), OSHA
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims. Served numerous times (in more than 100 cases) in the capacity of a consulting expert. Currently (Feb 2022) involved in one international arbitration case for a multimillion-dollar claim in the court of London and three other cases, including a construction delay and loss of productivity claim for a megaproject in New York, a construction injury case, and a slip and fall case in the United States. Licenses • Examined and certified as a Professional Engineer (P.E.) • Examined and certified by the Association of ...

Peter Vander Heide, RA, LEED AP G. Peter Vander Heide, AIA

New Jersey
Construction Defects, Architecture - stucco, building envelope, architecture, ADA, moisture intrusion, WUFI analysis, space frames, stairways, windows, building codes, roofing, delay claims, vapor barriers, air barriers, slip trip & fall, OSHA
Mr. Vander Heide is a practicing architect, registered in MI, PA & NJ. First registration was in MI in 1974. His career has included: full time work for a structural systems (space-frames) manufacturer, doing project engineering and later management; management of a hundred person architecture, engineering, landscape architecture, interior design firm; capital budgeting and owner led improvements of city government buildings; and the independent practice of architecture. Direct hands on experience includes construction inspections across North America, CADD contract documents, 3D computer modeling and animations. Management experience includes capital budgeting, project management and firm management. He is a voting member of ASTM Committee E:06 Performance of Buildings. He can bring building sciences to the table, as he has attended many WUFI advanced seminars and RCI conventions.. He started expert witness work in 2004 and has been a player in cases from ADA to trip and fall...

C.J. Abraham, PhD, P.E., DPE, JD, FRSC, FTI, DEE, IH

Great Neck, New York
Products Liability, Slip Trip & Fall - Athletics & Recreation, Safety, Safety Engineering, Warnings & Labels, Industrial Hygiene, OSHA, Risk Analysis, Biomechanics, Engineering, Fires, Explosions, Human Factors, Brain Injuries, Personal Injury, Trampolines, Amusement Parks, Water Parks, Playground Accidents
Dr. Abraham is a licensed P.E. and a Senior Member and a Diplomat in The National Academy of Forensic Engineers. Over the last 45 years, C. J. Abraham has created warnings and instructions for many products and protocols applied and used worldwide. He has consulted to major news channels, NHTSA, OSHA, NIOSH, State of California (CaITrans), Microsoft, New York Transit, Queensborough Bridge Authority, Department of Agriculture, the Federal Government, State Attorney General's Offices, and municipalities throughout the United States, Canada and Europe in a variety of technical areas. His interests include head and brain protection in sports and recreation and personal injury accidents and litigations. In addition, he is also involved in the reconstruction of all types of sports injuries in a large variety of recreational and sports activities, amusement and trampoline facilities, as well as accidents involving a variety of products and vehicles. His background may be found at www...

ANTHONY CORRADO, CHST, SSM, CSFSM, OSHA-Trainer NYC Safety Services, LLC

New York, New York
Construction, Safety - OSHA, Scaffolding, Construction Safety, Construction Accidents & Injuries, Holes-Covers-Falls, New York Labor Law, Construction Standard of Care, Aerial Lifts, Fork-Lifts, Reinforced Concrete, Excavations, Shoring, Underpinning & Foundations, Steel Erection, Personal Injury, Cranes, Scaffolds
Anthony Corrado is Founder and Principal of NYC Site Safety Services, LLC, a safety consulting firm in New York City that provides NYC contractors with Site Safety Plan Development, OSHA Training and on-site Licensed Safety Professionals who oversee safety on large scale construction projects as regulated by the NYC Department of Buildings. Anthony has had a long successful and diversified career in the NYC construction industry spanning almost 40 years. Starting at a young age as a Union Carpenter apprentice and working his way up to becoming a carpenter foreman in his early twenties, Anthony has continued his education and became a superintendent working on interior renovations in hi-rise buildings throughout NYC. He continued to progress and was continuously given larger projects and more responsibilities. Anthony rose through the ranks becoming a Senior Project Superintendent for a top 10 Construction Management company in the US and successfully managed projects up to $150 Mil...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

New York
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Amin Terouhid, Ph.D., PE, PMP, CFE Adroit Consultants, LLC

New York
Construction Defects, OSHA - Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, concrete inspection, standard of care, construction simulation and modeling, construction inspection, loss of productivity, critical path method (CPM), OSHA
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims. Served numerous times (in more than 100 cases) in the capacity of a consulting expert. Currently (Feb 2022) involved in one international arbitration case for a multimillion-dollar claim in the court of London and three other cases, including a construction delay and loss of productivity claim for a megaproject in New York, a construction injury case, and a slip and fall case in the United States. Licenses • Examined and certified as a Professional Engineer (P.E.) • Examined and certified by the Association of ...

Joe DeFranco, CSP Safety Consulting Specialists, Inc.

Raleigh, North Carolina
Safety, OSHA - Construction, General Industry, Equipment & Machinery, Forklifts, Slip, Trip & Fall, Lockout/Tagout, Scaffold, Aerial Lift, Crane, Rigging & Signaling, MSHA, Accident Investigation, Construction Safety, Forklifts, Ladders, Machine Guarding, Dropped Objects, Struck-by, Crush Hazards, Personal Injury
25+ years of experience in construction, industrial, and crane safety consulting. Retained in over 50 cases for both OSHA 1926 Construction and OSHA 1910 General Industry. Board Certified Safety Professional since 2001. OSHA 500 course in Construction Safety-Outreach Trainer NCCCO Certified Crane Operator NCCCO Certified Crane Inspector MSHA Certified Instructor Supervisor Training in Accident Reduction Techniques (S.T.A.R.T.) Certified Independent STAR Assessor American Society of Safety Professionals (ASSP) Member Experienced in: -Occupational safety and health policies & standards -Personal injury, catastrophic injury, and fatality cases -Multi-employer worksites -Crane accidents -Crane safety -Mobile and overhead cranes -Rigging & Signalperson -Trenching and excavation -Confined space -MSHA Part 48 & 46 -Contractor safety -Chemical safety including lead, silica, hexavalent chromium, and ammonia safety -Noise -Fall protection -Scaffolding -Forklift, Aerial lift -Accident inve...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Jamestown, North Carolina
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

John R. Puskar, PE Prescient Technical Services

Parma, Ohio
Fire, Oil and Gas - Mechanical Engineering, Boilers, Natural Gas, Furnaces, Carbon Monoxide, NFPA Codes, gas piping, steam, explosions, fires, ovens, OSHA, heaters, flue piping, NFPA 54, NFPA 85, ASME CSD-1, NFPA 86, NFPA 59A, NFPA 820, Methane, NFPA 56, Purging, Boiler Safety, Steam piping, Gas piping
Mr. Puskar is currently the President of Prescient Technical Services in Cleveland, Ohio. His firm provides strategic safety solutions related to flammable gas safety and the prevention of fires and explosions related to piping systems and combustion equipment in the oil and gas industry. Mr. Puskar is a licensed professional engineer in Ohio and 6 other states. Mr. Puskar holds a Bachelor’s degree in Mechanical Engineering from Youngstown State University and an MBA from the Weatherhead School of Management at Case Western Reserve University in Cleveland, Ohio. Mr. Puskar is the 2015 National American Society of Mechanical Engineers (ASME) Uzgiris Barnett medal winner for a lifetime of safety contributions to the industry. Mr. Puskar has served on several National Fire Protection Association (NFPA) standards and code committees including NFPA 54 (National Fuel Gas Code), 86 (ovens and furnaces), 85 (boilers), 820 (wastewater treatment plants), and 56 (flammable gas piping safety, 8...

Kevin A Rider, PhD, PE, CPE Forensic Human Factors, LLC

Columbus, Ohio
Human Factors, Engineering - Distracted driving, Driving behavior, Reconstruction, Biomechanics, Maritime, Manufacturing, Mining, OSHA, Premises Liability, Products Liability, Safety, Slips, Trips, Falls, Transportation, Warnings, Conspicuity, Cell phones, Texting, Lighting, Perception, Visibility, Instructions, Human Factors
Dr. Kevin Rider is a human factors expert and owner of Forensic Human Factors, LLC, providing investigations, reports and expert testimony for personal injury cases – plaintiff and defense. His expertise involves investigating how people interact with other people, products and environments in predictable ways, and applying this understanding to effective, efficient and safe products, services and systems. He has been retained as an expert in more than 40 states (+ Puerto Rico). Dr. Rider’s expertise includes: • MVAs and pedestrian collisions, incl. trucks, trains, buses, motor/bicycles • Illumination, nighttime visibility, and conspicuity • DUI/DWIs, where intoxication was not a proximate cause of crash • Adequacy of product designs and warnings • The design and maintenance of safe civil and occupational environments • Premises liability, and slips, trips and falls • Workplace and construction safety Dr. Rider is a Professional Engineer (PE), a Certified Professional Ergonomi...

Kevin L. Trangle, MD,MBA Kevin Trangle & Associates

Mayfield Heights, Ohio
Occupational Medicine, Environmental - Addiction Medicine, Chemistry, Chemicals, Preventive Medicine, IME, Indoor Air Quality, Internal Medicine, Toxicology, OSHA, Disability Evaluation, Engineering-Biomedical

Leslie "Les" A. Smart Smart Fleet Management, LLC

Bixby, Oklahoma
Transportation, Safety - Trucking, OSHA, FMCSA, DOT, FMVSS, Truck Accidents, Commercial Motor Vehicles, Drivers, Driver Actions, Hours of Service, Training, Hazmat, Fleet Operation, Fleet Maintenance
Leslie Smart has 50 (fifty) years of experience in trucks, truck equipment, related equipment, distribution by truck and tractor trailer (conventional and Hazmat), specifications, procurement, vehicle & driver safety, DOT/FMCSA regulations-compliance (including FMVSS, NHTSA, OSHA) operations, risk management, tires, truck maintenance (internal & by contract both with Penske & Ryder), training, behavior & monitoring. His experience also includes leasing of all types including full-service leases, managing a fleet directly and through a fleet management company. Responsibilities included the management of fleets of up to 5,500 vehicles in number. As an expert witness, Mr. Smart has worked equally with defendants and plaintiffs specializing in personal injury related to trucking, truck litigation, driver safety, fleet management, corporate fleet management, and operations. Professional Associations: Member of N.A.F.A. & N.T.E.A. Extensive experience using Penske, Ryder and other prov...

Dennis W. Eckstine Eckstine & Associates, Inc.

Waynesboro, Pennsylvania
Construction, Equipment & Machinery - Construction Vehicles, Construction Equipment, Cranes, Forklifts, Aerial Lifts, Mobile Elevating Work Platforms, MEWPs, Construction Accidents, Accident Reconstruction, Electrocution, Machinery, OSHA, Safety, Slips, Trips & Falls, Cranes, Aerial Lifts, Fork lifts
Eckstine & Associates, Inc. (E & A) provides litigation support, safety consulting, safety training, and engineering consulting services relating to safe and design of cranes, aerial work platforms, mobile elevating work platforms, MEWPs, lifts and other construction, industrial, and agricultural equipment. Our expertise regarding lifting equipment is unparalleled.

Steven D High, MPH, MS, CIH, CSP, ARM, CHST, CXLT High Environmental Health & Safety Consulting Ltd.

Lancaster, Pennsylvania
Slip Trip & Fall, OSHA - Certified Industrial Hygienist, Safety, Occupational Safety, Chemical Exposure, Public Health, Trenching, Construction Safety, Cranes, Rigging, Accident Investigation, Coefficient of Friction, Slip Resistance, Lockout, Electrical Safety, NFPA 70E, Health Exposure, Noise, Safety Culture, OSHA
Over 30 years in Safety & Health. Authorized Trainer and Instructor-Trainer for the OSHA Training Institute Outreach Education Center in Construction and General Industry. Post-baccalaureate Certificates in Environmental Health & Industrial Hygiene (Johns Hopkins) / Epidemiology & Bio-statistics (Drexel). Certified Safety Professional (CSP) Certified Industrial Hygienist (CIH) Construction Health & Safety Technician (CHST) Emergency Medical Technician - PA (EMT) Certified XL Tribometrist(CXLT)(slip-resistance) Frequent Public Speaker on Safety and Health Issues. Creative approaches and perspectives to cases. Defense and Plaintiff work. Organization Participation and Memberships: Lancaster County Industrial Safety Council (officer positions) American Society of Safety Engineers (ASSE) Member: Consultants’ Division American Industrial Hygiene Association (AHIA): Full Member; Member of the Occupational & Environmental Epidemiology Committee American Conference of Governmen...

Peter Vander Heide, RA, LEED AP G. Peter Vander Heide, AIA

Philadelphia, Pennsylvania
Construction Defects, Architecture - stucco, building envelope, architecture, ADA, moisture intrusion, WUFI analysis, space frames, stairways, windows, building codes, roofing, delay claims, vapor barriers, air barriers, slip trip & fall, OSHA
Mr. Vander Heide is a practicing architect, registered in MI, PA & NJ. First registration was in MI in 1974. His career has included: full time work for a structural systems (space-frames) manufacturer, doing project engineering and later management; management of a hundred person architecture, engineering, landscape architecture, interior design firm; capital budgeting and owner led improvements of city government buildings; and the independent practice of architecture. Direct hands on experience includes construction inspections across North America, CADD contract documents, 3D computer modeling and animations. Management experience includes capital budgeting, project management and firm management. He is a voting member of ASTM Committee E:06 Performance of Buildings. He can bring building sciences to the table, as he has attended many WUFI advanced seminars and RCI conventions.. He started expert witness work in 2004 and has been a player in cases from ADA to trip and fall...

William C Salter, MS, MBA, CIH, CSP, CHMM Sal Terra Safety Consulting

East Greenwich, Rhode Island
OSHA, Industrial Hygiene - Chemical Safety, Indoor Air Quality, Hazard Communication, Health and Safety Training, Hazardous Gas and Cryogenic Safety, Environmental Reporting, Hazardous Waste, Hazardous Materials Response, Behavioral Safety, Workplace Accident and Incident Investigation, Laboratory Safety, Process Safety
Certified Industrial Hygienist Certified Hazardous Materials Manager Certified Safety Professional

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

South Carolina
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

James A Poage, MA, CSP, ASP, SMS, CSMP, COHC James Poage LLC

Aiken, South Carolina
Safety, OSHA - Fall Protection, Employee Safety, Occupational Safety, Occupational Health, Workplace Accidents, Driver Safety, Safety Training, Workplace Illness, Workplace Injury, Workplace Fatality, Fall Prevention, Hearing Protection, Accident Prevention, Risk Management, Risk Exposure, Billboard Safety
Certified Safety Professional/CSP-34643 Associate Safety Professional/ASP-28339 Safety Management Specialist/SMS-646 Certified Safety Management Practitioner/14307 Certified Occupational Hearing Conservationist/506102 OSHA Outreach Instructor - General Industry OSHA Outreach Instructor - Construction National Safety Council CPR/First Aid/AED Instructor National Safety Council Defensive Driving Instructor COVID19 Return to Work Auditor FEMA - Fire Prevention training

Ellen Szubski, M.S., Ph.D., CXLT, CPSI, AHFP The Warren Group, Inc.

Irmo, South Carolina
Human Factors, Premises Liability - Accident Prevention, Risk Management, Illumination, Conspicuity, Visual Perception, Slip resistance, Playground Safety, Premises Liability, Lighting, Line of Sight, Driver Distraction, Roadway Markings, Environmental Conditions, Slip-Trip- Fall Evaluations, Workplace Injuries, Human Factors, OSHA
Ellen Szubski, Ph.D., is a human factors consultant at The Warren Group. She earned a Doctor of Philosophy in Human Factors Psychology and a Master of Science in Applied Psychology from Clemson University. Ellen is also a Certified XL Tribometrist, a Certified Playground Safety Inspector (CPSI), and a Certified Associate Human Factors Professional (AHFP). Ellen worked in the Clemson Visual Perception and Performance Laboratory examining the factors contributing to the conspicuity of pedestrians and bicyclists in challenging road conditions, such as nighttime driving. She did her dissertation on “The Influence of Pedestrian Biological Motion on Time-To-Collision Estimates at Night”. Prior to entering the forensic field, Ellen planned and conducted experiments for a major bicycle manufacturer that improved bicycle conspicuity. She also conducted laser strike perception and performance studies for the Department of Defense. Ellen applies her experience in Human Factors to the ana...

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

Tennessee
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Cory W Bruner Propel Safety Consulting

San Antonio, Texas
Safety, Risk Management - Legal Consulting, OSHA, Construction Safety, General Industry Safety, Safety Program, Safety Training, Job-site Accident Investigation, Safety Expert Witness, Job-site accident/fatality, OSHA Inspection, Concrete Pumping Accident, Concrete Pumping Safety, Electrical Safety, Electrical Accident.
Propel Safety Consulting is a full service safety, risk and legal consulting firm. We provide our clients turn key service that we personally help implement and that provides proven results. We stand by our success of helping our clients achieve the success they seek in their compliance programs. We have consulted for hundreds of clients and have reviewed hundreds of accident and fatality cases. With this knowledge of lessons learned from tragedy, we have developed programs and training that will help your firm become proactive in the prevention of accidents and prepared to handle accidents when they do happen without stress. Our team has decades of experience in safety, risk and legal consulting in real world ever day management for some of the biggest construction, chemical, oil and gas, manufacturing, meat packing and processing companies in the country. We know what works and doesn't work through decades of experience getting it wrong and right. We believe our clients are our pa...

Greg Gerganoff, CSP, Esq. Rocky Mountain Safety Consulting, Inc.

Houston, Texas
Safety, OSHA - OSHA/MSHA compliance, Oil & gas safety, Mining safety, Construction safety, Manufacturing safety, Workplace fatalities, Forklift safety, Conveyor safety, Crushing equipment safety, Fall protection safety, Walking/working surfaces, Pipeline safety, Workplace injuries, Work zone safety
Provide safety expert witness for mining, oil & gas, construction, manufacturing workplace injuries, including Worker’s Compensation Subrogation matters. Provide services to plaintiff or defense. I have worked as a safety professional for companies involving mining, oil & gas and construction and manufacturing for over 19 years. I am an OSHA General Industry 10 & 30 Hour Authorized trainer, and oil & gas PEC Safeland Trainer for Basic and Core training, holder of Blue Card from MSHA for miner safety training. “Hydrogen Sulfide-Safety.” Journal of the American Society of Safety Engineer, Professional Safety, Spring 2015. “Use of OSHA as Standard of Care Negligence Cases.” Trial Talk, Colorado Trial Lawyers Association, March/April 2016. “Expert Safety Witness Role, Use of the OSH Act as Standard of Care in Common-Law Negligence Cases.” Journal of the American Society of Safety Engineer, Professional Safety, February 2017. “Implementing an Effective OSH Program Without a Dedi...

Stanley C Haimes, MD, MPH, CIH, CSP, CIME, FACOEM

Texas
Occupational Medicine, Industrial Hygiene - Toxicology, Mold, Indoor Air, OSHA, metals (arsenic, chromium, lead, mercury), ethylene oxide, ethylene dibromide, chemical exposure, Medical Standards, Workers Compensation, Firefighter, Law Enforcement Officer, Police Officer, Deputy Sheriff, Disability Evaluation, Return to Work, MD, CIH.
Assistant Professor at the College of Medicine of the University of Central Florida. Board Certified in Occupational Medicine, Residency Trained at Johns Hopkins, and a Fellow of the American College of Occupational and Environmental Medicine (FACOEM). Certified Industrial Hygienist (CIH) and Certified Safety Professional (CSP). Certified Independent Medical Examiner (CIME). Medical Officer for the Federal Occupational Safety and Health Administration (OSHA). Member of the national committee that determines safe exposure levels to chemicals in the workplace (Threshold Limit Value Committee (TLV) of the American Conference of Governmental Industrial Hygienists (ACGIH)). Member of Scientific Review Panel for the Hazardous Substance Data Base (HSDB) maintained by the National Institutes of Health. Member of the national committees that develop medical guidelines for employment as a firefighter (NFPA 1582 Technical Committee) and a law enforcement officer (ACOEM LEO Medical Guida...

Roger H Hanson, CSHO Critical Construction Consultation

La Porte, Texas
OSHA, Slip Trip & Fall - Fall Prevention , Material Handling , Electrical Safety, Signs Signals Barricades, Ladders, Stairways , Working at Heights, Hand Tools, Steel Erection, Excavation, General Safety, Welding, Scaffolding, Confined Space, PPE, HazMat, Aerial Man Lifts, Respirators, Fire Prevention, Cranes and Rigging
30 plus years in construction of which14 years in construction safety. Achieved a Certified Safety and Health Official from Texas A&M University College of Engineering TEEX in 2013. Employed by TEEX from 2013-2015 as an Adjunct Professor teaching OSHA related course. Subject Mater Expert Student Fall Prevention/Protection Textbook TEEX. Train the Trainer OSHA CFR 1926 Train the Trainer industrial and Extendable-boom Forklifts, Aerial Manlifts, Structural and Aerial Suspension Scaffolding. Served in the USAF 3 years 3 months and 15 days as a C130 Aircraft Electrical Tech. Received an Honorable Discharge. Expert Witness Construction Fall Protection Cause 37360 223 District Court Gray County Settled prior to trial. Oilfield Crane-Rigging-Signaling Cause B192-633 District Court Jefferson County Settled prior to trial. Construction Motorized Manlift Cause 67795-A Smith County Settled prior to trial. Constuction Concrete Pumping Cause DC-17-10426 284th Judicial District Court Settled pr...

Andrew McKewen, CSHO Service Safety

La Porte, Texas
OSHA, Safety - construction safety, accident investigation, safety training, OSHA disputes, job-site audits, fall protection, stairways and ladders, OSHA authorized trainer, employee rights, employer requirements, documentation, safety policies, OSHA inspections, scaffolds, boom lift, scissor lift, forklift, PPE
Mr. McKewen has over 14 years of occupational safety and health experience within the construction industry. Over the past 12 years he has been in a senior management position within several construction builders and safety consulting companies. The following detail the and services provided to clients and employers; Accident Investigation Thorough, detailed and efficient investigations of accidents, ranging from property damage to construction fatalities. Breaking down everything from company policy to human behavior to find the root cause of the accident. OSHA citation disputes Research the standards which were cited as being in violation, find OSHA Letters of Interpretation, take into account job-site conditions, company policy, training and human behaviors; then meet with OSHA in an informal conference to eliminate the citation. Job-site audits Inspect job-sites, observe employees’ activities. Inspect tool and equipment for safe and proper use and condition, engage with empl...

Michael R. Roop, CSP MRE Training & Consulting

Richmond, Texas
Safety, OSHA - Fall Protection, Confined Space Entry, Confined Space Retrieval, Confined Space Rescue, OSHA and Standards Compliance, Industry Best Practices, Telecommunication Tower Climbing, Safety Training Accidents, Highway Roadwork Safety, Rail Tank Car Entry and Rescue, Ladder Safety, Trench Collapse
Certified Safety Professional (Safety training, incident investigations, and safety procedures and programs). Roop has many years of experience as both a company as well as a contracted Safety Director. Court certified expert in fall protection, confined spaces, safety, rescue, law enforcement, trench collapse, OSHA regulations, rail tank car incidents, and safety equipment. Captain, Louisiana State Police (Retired) Roop has worked as a specialized safety expert in dozens of cases and has given deposition and courtroom testimony in numerous of those work engagements. Roop’s experience includes performing site investigations and authoring subsequent reports detailing how events proceeded and what individuals/circumstances lead to a specific outcome. Additionally, as a retired uniformed and plain clothes state police officer and commander, Roop has provided evidence and testified in hundreds of felony and misdemeanor trials. Michael is a highly qualified incident investigator e...

Doug Rush, CIH, CSP, CHMM, SMS, OHST, REPA,MSc, Scopus Consultants, Inc.

Cypress, Texas
Industrial Hygiene, Safety - CIH, CSP, CHMM, Covid, Indoor Air Quality, Toxicology, Asbestos, Environmental, Mold, Legionella, Pesticides, Dermal Assessment, Exposure, Occupational Hygiene, COPD, Forensic Science, Environmental Engineering, Job Hazard Assessment, OSHA, Safety, Warnings & Labels, Products Liability, IAQ
Summary of Experience I am a Certified Industrial Hygienist (CIH), Certified Safety Professional (CSP), Certified Hazardous Materials Manager (CHMM), Safety Management Specialist (SMS), EPA Nationally Qualified Asbestos Consultant, Licensed Asbestos Consultant, and Hazmat Expert. I help clients with a whole range of health, safety, and environmental challenges, and I have a specialty in industrial hygiene including forensic analysis and testimony associated with current and past exposures to chemical, biological, and safety related injuries and illnesses. My experience encompasses the leadership and management of teams of Health, Safety and Environmental (HSE) experts including industrial hygienists, safety professionals, environmental engineers, medical doctors, nurses, and technicians in workplace incidents and exposures to industrial chemicals and substances such as asbestos, benzene, welding fumes, lead, mold, pesticides, among others. My accomplishments include participation ...

Amin Terouhid, Ph.D., PE, PMP, CFE Adroit Consultants, LLC

Texas
Construction Defects, OSHA - Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, concrete inspection, standard of care, construction simulation and modeling, construction inspection, loss of productivity, critical path method (CPM), OSHA
Dr. Amin Terouhid is a Principal Consultant with Adroit Consultants, LLC. He leads a vibrant consulting practice on construction claim matters especially in the areas of delay analysis, loss of productivity, claims for changes, construction defects, and injury cases. With extensive experience working on several large and mega construction projects internationally and throughout the United States, he is a recognized expert in preparing and investigating construction claims. Served numerous times (in more than 100 cases) in the capacity of a consulting expert. Currently (Feb 2022) involved in one international arbitration case for a multimillion-dollar claim in the court of London and three other cases, including a construction delay and loss of productivity claim for a megaproject in New York, a construction injury case, and a slip and fall case in the United States. Licenses • Examined and certified as a Professional Engineer (P.E.) • Examined and certified by the Association of ...

Vince Vittatoe, CPP, CSC, CPTED Vittatoe Consulting, LLC

McKinney, Texas
Security, Premises Liability - Inadequate/Negligent Security, Hotel/Motel, Safety/Security, Security Procedures, commercial buildings, Crime Foreseeability, Assaults, Battery, Rape, Robbery, Murder, Parking Lot, Apartments, Violent Crime, Workplace Violence, Wrongful Death, OSHA, emergency/crisis, premises security liability
Vince Vittatoe, CPP, CSC, CPTED, is the Principal/CEO at Vittatoe Consulting, LLC, independent security management and forensic consulting practice focused on providing clients security and loss prevention expertise to help protect their employees and customers. With over 30 years of combined law enforcement and corporate safety, security, and loss prevention experience, we offer our clients direction and advice from our experience in both the public and private sectors. After college, Vince worked for State Farm Insurance as an accounting supervisor before joining the Dallas Police Department in 1988, serving as a police officer and divisional defensive tactics instructor. Upon returning to the private sector, Vince entered the hospitality industry and gained operations experience as an Area Manager for Motel 6, responsible for twelve motels. Next, Vince moved to the corporate office of Accor North America as the Director-Safety & Security. Vince held safety, security, and los...

Patrick J Walsh, CSP Walsh Safety Consulting

Georgetown, Texas
Safety, Construction - OSHA, Personal Injury, Property Damage, Risk Management, Loss Prevention, Accident Investigation

Sandra Whitaker, CSHO Ongoing Safety & Health Advice

Spring Branch, Texas
Safety, OSHA - OSHA Standards, Accident Investigation, Confined Space, Fall Prevention Systems, Haz-Comm, Lockout/Tagout, Machinery/Machine Safeguarding, Materials Handling, Means of Egress, Personal Protective Equipment, Powered Industrial Truck Operations, OSHA Record-keeping, Walking/Working Surfaces
As a US-DOL Occupational Safety and Health expert with over 50 years’ experience in the field, Sandra Whitaker offers expert witness and litigation support for clients located throughout Texas. Ms. Whitaker is a Certified Safety and Health Official (CSHO) and US-DOL OSHA Approved Trainer. Mrs. Whitaker’s extensive experience, education, and training in the area of US-DOL-OSHA compliance make her uniquely qualified to offer these expert services: • Expert Witness – Deposition and Trial – both plaintiff and defense. • Comprehensive review and interpretation of OSHA 29 CFR 1910 General Industry regulations. • Workplace Injury services including determination of cause, research, opinion and consultation. Services Include: Case File Review; Regulation Research; Written Opinion; Arbitration; Deposition; and/or Trial for either Plaintiff or Defense Attorneys. Experience: Fifty Years in US DOL OSHA compliance in the following industries: Warehouse; Manufacturing; Logistics; Food/Beverage...

Michael Claverie Claverie Safety Consultation L.L.C.

RIVERTON, Utah
Safety, OSHA - 1910 General Industry, Accident Investigation, Fall Protection, Haz-Com, Hazard Recognition, Logistics Safety, OSHA Record Keeping, OSHA Standards, Powered Industrial Truck Operations, PPE, Risk Management, Root Cause Analysis, Safety Training, Warehouse Safety, Workplace Injuries
Mr. Claverie has been doing occupational health and safety work since 2010 and has experience applying safe work practices within a broad range of industries including fire prevention, training, construction, power generation, manufacturing, DOT, and warehouse logistics. He can speak to a wide range of health and safety topics and the applicable regulatory requirements. He has a Bachelor of Science in Occupational Health and Safety and is certified through the BCSP and holds a current Certified Safety Professional certificate (CSP). He has in the past been a certified First Aid class trainer, respirator fit tester, and done industrial hygiene sampling work. He is very familiar with the OSHA 29 CFR 1910 General Industry Regulations, and also has experience with the OSHA 29 CFR 1926 Construction regulations as well. He is proficient in accident investigation, root cause analysis, OSHA standards, OSHA recordkeeping, powered industrial truck operations, warehouse safety, logistics s...

Deborah E Dickerson, PhD CIH CSP CHMM Dickerson Consulting LLC

Blacksburg, Virginia
Products Liability, Warnings & Labels - Injury, Illness, Product Liability, Premises Liability, Industrial Accidents, Warnings and Labels, OSHA, Worker's Compensation, Human Factors, Safe Equipment Design, Respiratory Protection, Respiratory Illness, Chemical Exposures, Dust, Asbestos, Silica, Lead, Temperature Extremes, Laboratory Safety
Expertise in: product design and safety; design of product warnings and labels; chemical exposure risks, analysis, and health outcomes; industrial system design, safety, and training. I am an associate professor of safety engineering and human factors engineering and the Director of the Product and System Safety Laboratory in the Grado Department of Industrial and Systems Engineering at Virginia Tech in Blacksburg, VA. I hold MS and PhD degrees in safety engineering and the certified safety professional (CSP), certified industrial hygienist (CIH), and certified hazardous materials manager (CHMM) credentials. I have over 30 years of experience in the fields of industrial hygiene and safety engineering: conducting investigations and designing safe work systems. I led a compliance organization responsible for conducting investigations and ensuring compliance with safety and health standards (OSHA and EPA). I have 21 years of university teaching experience and have taught cours...

Tara L Pase Bramel Engineering, LLC

Virginia
Structural Engineering, Civil Engineering - Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis
Civil/Structural Engineering Construction Defects Building Codes OSHA Failure Analysis Strength of Materials Concrete/Steel/Wood/Masonry Design Concrete/Steel/Wood/Masonry Analysis Seismic Design and Analysis Wind Design and Analysis Foundations and Retaining Structures Grading and Soil Properties Field Repair Designs Stormwater Management Component/Connection Design and Analysis Construction Cost Estimates Building Envelope (Moisture Barriers) Construction Management Registered Professional Engineer, State of New York, License No.087752 Registered Professional Engineer, State of Maryland, License No.42640 Registered Professional Engineer, Commonwealth of Virginia, License No.051210 Registered Professional Engineer, State of New Jersey, License No.24GE05239300

Christopher K Lane, PE POWERPLANT SPECIALISTS, LLC

SAMMAMISH, Washington
Engineering, Energy - power, refinery, turbine, diesel, boiler, asbestos, marine, propulsion, controls, lockout - tagout, LOTO, OSHA, engineering economics, alternative energy, digester gas, landfill gas, geothermal, cogeneration, combined cycle, microturbines, plant operations, aeroderivative gas turbines
45 years experience as power plant and marine propulsion engineer. Extensive expert witness experience (over 100 cases). International arbitration experience in England, Mexico, Australia and Mexico. Forensic analysis using multi-disciplinary "systems" approach to ferret out what happened or "who dunnit". Registered Professional Engineer (CA, AZ & WA), 30 years experience as General Engineering Contractor for new construction and heavy maintenance work at power plants and similar facilities. Special experience in critical standby power systems at Data Centers, hospitals and telecommunications facilities.

Gary E Kilpatrick, PE, DFE The Kilpatrick Group, PA

West Virginia
Mechanical Engineering, OSHA - Crash Reconstruction, ATV, ROV, UTV, Automotive, Motorcycle, School Bus, Tractor Trailers, Industrial Process Equipment, Product Defect, Failure Analysis, Forklift, Crane, Mobile Elevating Work Platform, Aeral Lift, Personel Lift, Amusement Park Rides, OSHA, Industrial Accidents
Gary E. Kilpatrick, PE, DFE at The Kilpatrick Group is a board certified Forensic Engineer through the National Academy of Forensic Engineers (NAFE) and is a Diplomat Forensics Engineer (DFE). Gary provides forensic engineering services to law firms and insurance companies in the following areas: Product Defect and Failure Analyses. OSHA 29CFR 1910, 1926 and 1928 regulations. Forklift Accidents. Crane Accidents. Industrial Process Equipment Accidents. Amusement Park Ride Accidenst. Motor Vehicle Crash Reconstruction. School Bus Safety and Crash Reconstruction. Tractor Trailer Crash Reconstruction. Motorcycle Accident Crash Reconstruction. ATV/ROV/UTV Crash Reconstruction. Mobile Elevating Work Platform Accident Investigations. I Earned a BS Degree in Mechanical Design Engineering from North Carolina State University with an emphasis in Machine Design Engineering and Automotive Design Engineering. I have over 20 years of industrial work experience five years of which I spent ...

Timothy Kobernat, CSP RET OSHAware LLC

Eau Claire, Wisconsin
OSHA, Safety - OSHA, Fall Protection, Confined Space, Trenches, OSHA Standards, Paper Mill, Excavating, Lockout/Tagout, Cranes & Forklifts, Grain Elevators, Multi-Employer Worksites,Material Handling
With 32 years experience as an OSHA Area Director and Safety Compliance Officer, as well as an additional 17 years in various related safety and heath related work, I have a broad range of experience in OSHA & safety related matters. In the approximately 14 years I spent as a compliance safety and health officer, I conducted approximately 1500 site inspections, roughly half of which were related to construction standards enforcement. During these inspections, I evaluated safety and health conditions and hazards, recommended abatement methods, and determined exposure and standard application. While serving approximately 16 years as district supervisor and area director for OSHA, a major part of my duties was to review virtually all files that came through our office, certifying their legal sufficiency for citations. In addition to my enforcement efforts with OSHA, I also conducted numerous construction safety seminars, helping companies to come into full compliance wit...
You can also find OSHA Expert Witnesses in:
Michigan, Hawaii , California, Arkansas, Utah, Connecticut, North Carolina, Massachusetts, Texas, Kentucky, Pennsylvania, Illinois, Wisconsin, New Jersey, South Carolina, Colorado, and Rhode Island