Chemical Engineering Expert Witnesses

The SEAK Expert Witness Directory contains a comprehensive list of chemical engineering expert witnesses who testify, consult and provide litigation support on chemical engineering and related issues. Chemical engineering expert witnesses and consultants on this page may form expert opinions, draft expert witness reports, and provide expert witness testimony at deposition and trial. The issues and subjects these chemical engineering expert witnesses testify regarding may include: Patent Infringement, Failure Analysis, Formulation, Materials Science, Patents, Plastics, Process Safety Management, Product Development, Rubber, 3 D Additive Manufacturing, Accident, Adhesive, Adhesives And Films, Aerospace, and Agricultural Adjuvants.

Use the search box above to further refine your search for chemical engineering expert witnesses by keyword and state. Attorneys contact the experts directly – with no middleman.

Christian W. Knudsen, PhD MIT, PE Knudsen Associates

California
Chemical Engineering, Chemistry & Chemicals - Intellectual Property, Patent Analysis, Patent Infringement, Patent-Litigation Support, Patents, Petrochemicals, Specialty & Fine Chemicals, Plastics, Oil & Gas, Coal/Synfuels, Rubber, R&D, Laboratories & Testing, Environmental, Toxic Chemicals, Failure Analysis, Forensic Science
Fellow AIChE ● ACS ● ASME 45+ Years Experience ● MIT Trained ● 8 Patents Broad R&D and corporate experience at Exxon, GE, Halcon SD. Executive service in synfuels development at the U.S. Dept. of Energy. 18 years owning and managing a private R&D chemical process development laboratory.

Meyer R. Rosen, FAIC, FRSC, CPC, CChE Interactive Consulting, Inc.

Bonita Springs , Florida
Products Liability, Fire - Fires, Explosions, hazardous chemicals, Chemical burns,Toxic exposures, chemistry, chemical engineering, consumer products, industrial products, industrial accidents, materials science, cosmetics, hair relaxers, warnings & instructions, OSHA Codes, Standards, SDS, Patent Infringement, Trade Secrets
Experienced Consulting and Testifying Forensic Litigation Expert Witness. Products Liability and Personal Injury. Plaintiff or Defense; Federal and State. Incident Reconstruction, Complex Litigation, Early case consultation, International Experience. 25 years Industrial Experience. Consumer & industrial product development. Evaluation of hazardous chemicals & safety issues; Chief Scientific Advisor and Director of Technical & Regulatory Symposia for HBA (Health & Beauty, America), Academic Experience: Adjunct Professor Fire Science (15 years); Fire and Explosion Investigator (E-CFEI); Advanced Training (CFEI). Affiliate member National Academy of Forensic Engineers. Member: National Fire Protection Association, American Chemical Society, American Institute of Chemical Engineers, Contributing Expert for ASTM Standards- Making Committees (American Society of Testing Materials), Peer Reviewer Professional Journals, Member: Center for Dermal Research, Rutgers University. Fellow...

Rustom S Kanga, Ph.D. Xiper Innovations, INC.

KENNESAW, Georgia
Chemistry & Chemicals, Chemical Engineering - Polymer Chemistry, Photopolymers, Graphic Arts (Printing), Flexographic Printing, Screen Printing, UV Cure Technologies, Elastomers, Water-borne Coatings, UV Cure Coatings, Solvent-borne Coatings, Antimicrobial Coatings, 3D Additive manufacturing, Smart Coatings
Rustom Kanga is the President and Founder of Xiper Innovations, Inc., a consulting firm offering Research and Product Development services to corporations. Dr. Kanga is a Research Scientist and Product Development professional with extensive knowledge in the Graphic Arts (Flexographic Printing), Photopolymers, UV Cure, Polymer Chemistry, and Specialty Coatings industries. Dr. Kanga has wide experience in all aspects as an Expert Consultant / Expert Witness specifically in Patent Litigation matters in Flexographic Printing, polymer chemistry, and UV cure projects. Dr. Kanga also has experience in Utility Patent Application Projects with US PTO. He has a working knowledge of Inter Partes Review (IPR) and Post Grant Review (PGR) as it pertains to challenging the validity of issued patents. Specific Expert Witness/Consultant Projects • Arkansas Labeling Inc. v. Tim Proctor, Gary Parr, et al: United States Eastern District Court. Case# 4:19-cv-00773-KGB. Expert Consultant and Expe...

Christian W. Knudsen, PhD MIT, PE Knudsen Associates

Massachusetts
Chemical Engineering, Chemistry & Chemicals - Intellectual Property, Patent Analysis, Patent Infringement, Patent-Litigation Support, Patents, Petrochemicals, Specialty & Fine Chemicals, Plastics, Oil & Gas, Coal/Synfuels, Rubber, R&D, Laboratories & Testing, Environmental, Toxic Chemicals, Failure Analysis, Forensic Science
Fellow AIChE ● ACS ● ASME 45+ Years Experience ● MIT Trained ● 8 Patents Broad R&D and corporate experience at Exxon, GE, Halcon SD. Executive service in synfuels development at the U.S. Dept. of Energy. 18 years owning and managing a private R&D chemical process development laboratory.

Chris Scott, PhD Material Answers LLC

Weston, Massachusetts
Chemical Engineering, Failure Analysis - polymer, plastic, rubber, coating, materials, material science, material engineering, thermoplastic, thermoset, composite, design, manufacturing, adhesive, ink, automotive, medical device, aerospace, packaging, accident, defect
Dr. Chris E. Scott is President of Material Answers LLC. He specializes in material structure, properties, and processing. His work emphasizes thermoplastics, thermosets, blends, composites, and multicomponent formulations. He has extensive experience with manufacturing, product development, product design, and failure analysis. Systems investigated include plastics, composites, coatings, paints, adhesives, rubbers, fibers, suspensions, emulsions, and pastes. In particular, Dr. Scott has published extensively on the topics of polymer processing and structure relationships, compounding and mixing in multiphase polymer systems, and structure and morphology development during polymer processing. He is the inventor on 11 U.S. patents, author of more than 30 articles in peer reviewed journals, author of 40 conference proceedings, and has presented more than 50 seminars to industry and government organizations. Dr. Scott has conducted failure analysis investigations and developed p...

Randal Hill, PhD Kodiakhill Services LLC

Honor, Michigan
Chemistry & Chemicals, Chemical Engineering - Colloid, Surface Chemistry, Silicones, Materials Science, surfactants, detergents, formulation, emulsions, microemulsions, liquid crystals, formulation, product development, patents, IP, personal care, household care, upstream oil & gas, electrophoretic displays, agricultural adjuvants
Randal Hill has more than 30 years of industrial silicone and surface chemistry experience including silicone defoamers, formulation of household and personal care products, applications of silicone surfactants, silicone-based nanotechnology for soldier protection, development of pigments for electronic displays, and, most recently, upstream oil and gas well treatment. He wrote the book on “Silicone Surfactants”, and has 64 patents and more than 50 papers. He received a PhD in physical chemistry from the University of Oklahoma, and served as the Dow Corning Visiting Scientist at MIT for five years. With an educational background in physical chemistry (PhD) and physics he went on to establish a career working with surfactants for applications ranging from personal care and polymer coatings to oil and gas. After getting his start with Dow Corning (now Dow Silicones) in progressive research capacities, he spent time with E Ink during their startup phase and most recently with the oil...

Chris K. Haas, PhD Indigo Sciences, LLC

Saint Paul, Minnesota
Chemical Engineering, Intellectual Property - polymers, plastics, patent infringement, adhesives and films, security documents, micro-optics, extrusion, injection molding, product development, failure analysis, laminates, polymer coatings
Dr. Haas is an expert in plastics, films, labels, and adhesives with a special focus in security documents such as passports, identity cards, currency, and labels. He is an Engineering Fellow at the University of St. Thomas School of Engineering where he has taught since 2009, including courses on materials , polymers in design, senior design, fluid mechanics laboratory, and thin films. He also teaches on materials at the University of Minnesota. More than 25 years of industry experience at 3M and Gemalto/Thames during which he generated, supported, and defended numerous patent filings and developed products that have achieved over $250MM in sales. A member of the American Institute of Chemical Engineers (AIChE), the Northwestern University Chemical and Biological Engineering Advisory Board, and the Document Security Alliance. Dr. Haas has 18 patents. Focus areas include: - New product and technology development - R&D strategy - Polymer extrusion and coating - Polymer and adhesiv...

Christian W. Knudsen, PhD MIT, PE Knudsen Associates

New York
Chemical Engineering, Chemistry & Chemicals - Intellectual Property, Patent Analysis, Patent Infringement, Patent-Litigation Support, Patents, Petrochemicals, Specialty & Fine Chemicals, Plastics, Oil & Gas, Coal/Synfuels, Rubber, R&D, Laboratories & Testing, Environmental, Toxic Chemicals, Failure Analysis, Forensic Science
Fellow AIChE ● ACS ● ASME 45+ Years Experience ● MIT Trained ● 8 Patents Broad R&D and corporate experience at Exxon, GE, Halcon SD. Executive service in synfuels development at the U.S. Dept. of Energy. 18 years owning and managing a private R&D chemical process development laboratory.

Jennifer T. Morningstar, BSChE, PE, CFEI The Warren Group

Irmo, South Carolina
Chemical Engineering, Fire - Process Safety Management, Chemical Release & Exposure, Chemical Fires & Explosions, Boiler Fires & Explosions, Energy Management, Refrigeration, Cooling Towers, Chillers, Ammonia Based Refrigeration Systems, Saturated Steam and Super-heated Steam for Cogeneration
Jennifer Morningstar is a licensed professional engineer in South Carolina, North Carolina, Georgia, Iowa, Louisiana, Missouri, Oklahoma and West Virginia, and an NCEES Model Law Engineer. She has over 20 years of engineering experience. Her emphasis includes chemical release & exposure, OSHA compliance, boiler systems, industrial accident investigation, fires & explosions, product liability and scope of damage/cost to repair. She has provided deposition and trial testimony in both state and federal court. She spent 16 years working at a polyethylene terephthalate (PET) manufacturer where she gained experience with distributed control systems (DCS) and programmable logic controllers (PLC). She is an OSHA-trained Process Hazard Analysis study leader and completed Root Cause Failure Analysis training to become an Incident Investigator. Jennifer authored procedures for lockout/tagout and confined space entry. She also managed capital expansion projects in excess of $1M. Jennifer then ...

Christian W. Knudsen, PhD MIT, PE Knudsen Associates

Texas
Chemical Engineering, Chemistry & Chemicals - Intellectual Property, Patent Analysis, Patent Infringement, Patent-Litigation Support, Patents, Petrochemicals, Specialty & Fine Chemicals, Plastics, Oil & Gas, Coal/Synfuels, Rubber, R&D, Laboratories & Testing, Environmental, Toxic Chemicals, Failure Analysis, Forensic Science
Fellow AIChE ● ACS ● ASME 45+ Years Experience ● MIT Trained ● 8 Patents Broad R&D and corporate experience at Exxon, GE, Halcon SD. Executive service in synfuels development at the U.S. Dept. of Energy. 18 years owning and managing a private R&D chemical process development laboratory.

Morris D. Argyle, PhD, PE

Provo, Utah
Chemical Engineering, Safety - Petroleum Refining, Heterogenous Catalysis, Process Safety Management, Risk Management, Hazard Analysis, Fluid Catalytic Cracking, Oil and Gas, Energy, Catalyst Deactivation
Professional Engineer registered in Texas. Eight years' petroleum refining experience in process design, economics, fluid catalytic cracking operation and supervision, hydrodesulfurization and catalytic reforming supervision, technical and operations supervision. Prior expert witness in cases involving chemical engineering safety (heat transfer and pressure relief) and attempted arson. Twenty years' experience teaching undergraduate and graduate chemical engineering courses. 61 peer-reviewed journal publications in areas of heterogenous catalysis, catalyst deactivation, energy, hydrogen generation and purification, and CO2 capture, Fellow of the American Institute of Chemical Engineers.

Christian W. Knudsen, PhD MIT, PE Knudsen Associates

Alexandria, Virginia
Chemical Engineering, Chemistry & Chemicals - Intellectual Property, Patent Analysis, Patent Infringement, Patent-Litigation Support, Patents, Petrochemicals, Specialty & Fine Chemicals, Plastics, Oil & Gas, Coal/Synfuels, Rubber, R&D, Laboratories & Testing, Environmental, Toxic Chemicals, Failure Analysis, Forensic Science
Fellow AIChE ● ACS ● ASME 45+ Years Experience ● MIT Trained ● 8 Patents Broad R&D and corporate experience at Exxon, GE, Halcon SD. Executive service in synfuels development at the U.S. Dept. of Energy. 18 years owning and managing a private R&D chemical process development laboratory.
You can also find Chemical Engineering Expert Witnesses in:
Utah, Minnesota, Michigan, Georgia, Virginia, South Carolina, and Massachusetts