211 System Design Expert Witnesses Found

Fraud, Accounting - White-Collar Fraud, Embezzlement, Bank Fraud, Securities Fraud, Public Corruption, Credit Card Fraud, Elderly Exploitation, Locate Hidden Assets, Heirs Research for Probate Estates, Financial Forensics, Money Laundering, Criminal Defense, Civil Cases, Capital Murder Cases, Mitigation Specialist.

...I am currently licensed in Alabama as a Private Investigator (#689) and have held the Certified Fraud Examiner designation for over 21 years. I retired from the Federal Bureau of Investigations (FBI) as Sr. Forensic Accountant in 2017, which led to my starting my own practice to continue doing the work I love with the U.S. Attorney's Office, FBI, Secret Service, Defense Attorneys and the public. I previously held certifications in: Certified Internal Auditor (2001-2016), Certified in Control Self-Assessment (2002-2016), Accreditation in Internal Quality Assessment/Validation (2004-2016), Master Analyst in Financial Forensics (2008-2012) and Certified Fraud Specialist (2009-2011). These certifications expired while I was working for the FBI as the government didn't pay for membership dues nor professional training requirements, even though you were their employee....

Automotive, Motorcycle - Engine, Motor, Defect, Damage, Failure, Exhaust, Emission, Carbon, Monoxide, NOx, Test, Measure, Defeat Device, Computer, Control, Software, Calibration, Tuning, Performance, Power, Fuel, Economy, Combustion, Leak, Heat, Burn, Fire, Gas, Diesel, Motorcycle, Autocycle, Bike, Bicycle, Battery, Lemon

...While working for Ford Motor Company, he applied his failure analysis and troubleshooting skills to discover many design- and manufacturing defects and implemented affordable solutions before mass production started to prevent recalls. His deep technical expertise allows him to analyze defects, and products in detail, and explain clearly the main issues that the judge and jury need to internalize in order to comprehend the essence of the case. His extensive educational experience in academia allows him to help judges and jurors understand the topic they are dealing with. Dr. Will has invented, designed, built, and licenced automotive products such as heat management systems and engine software strategies that reduces emissions and fuel consumption. Therefore, he is also experienced in IP, patent infringement law, and developing claim charts....

Engineering, HVAC - HVAC and Refrigeration, Process and Power Piping, Plumbing Systems, Standard of Care in Design and Construction, Chemical Exposures in the Workplace, Cleanroom Design and Performance, Codes and Standards, Patent and Trade Secret Disputes, Data Centers

...As a consulting mechanical engineer, Bill provides project analysis, forensic reconstructions and litigation support services relating to the design, delivery and functioning of high-tech manufacturing facilities, semiconductor fabrication facilities, institutional laboratories, data centers, health care facilities and a variety of commercial buildings. He is a recognized expert in the evaluation of deficiencies in HVAC systems, cleanrooms, piping systems, refrigeration systems, construction defects and building and fire code compliance. He represents both plaintiffs and defendants. Bill has more than 45 years of experience as a professional engineer and owner's agent and is a recognized expert in assessing, evaluating, remediating and providing testimony on complex project design, construction and operational matters. His consulting expertise has been influential in shaping approaches to code compliance and life safety in semiconductor and similar advanced technology facilities.

Dentist, Investigation - Dentist, Standard of Care, Dental Investigation, Dental IMEs, Implants, Office Construction & Equipment, Digital Impression Imaging, Infections, Crowns & Bridges, Diagnosis & treatment plan, Veneers, Trauma, Dentrix Software Management. Ledger and insurance analysis. Dental employment issues.

...Thirty-eight years of experience in dentistry including: Dental Reconstruction; Dental Employment; Dental Crown & Bridges; Dental Implants; Dental Root Canals; Oral Surgery/Extractions; Orthodontics; Dental bone and gum infections; Dental Veneers; Dental Standard of Care; Dental Trauma; Dental Reconstruction; Dental Diagnosis; Dental Office Construction, Management, and Equipment; Dental IMEs, Dental Identification; Dental Examination, Dental Digital Imaging and Case Design, failure to diagnosis, failure to treat dental conditions, dental fraud, inadequate treatment, over treatment, inappropriate behaviors of a doctor and/or staff, inadequate clinical practice, inadequate treatment planning, appropriateness of care, and board generated cases due to malpractice settlements or awards. I will provide excellent diagrams, charts, photographs, and videos with supportive narratives for exhibits, legal documents and trials....

Technology, Telecommunications - Cell Phone Forensics, Digital Forensics, Technology, EDR, ECM, Triangulation, Black Boxes, Electronic Medical Records, EHR,Investigation, Email, Cell phone apps, information Technology, intellectual property, internet, electronics, cyber security, Documents, hacking, data retrieval, Digital evidence

• Accounting Systems • Black Boxes • ECU, EDR, ECM, Etc. • Cell Phones • Call Data Records (CDRs) • Computer Systems • Databases • Digital Cameras • Digital Fraud • Digital Media • Digital Security • Documents • Electronic Logging Devices • Electronic Medical Records (EMR / EHR) • Email / E-mail • Fax Machines • Google Data • GPS Systems • GPS Records • Hacking Events • iCloud data • Intellectual Property • Internet Browsing History • Intrusions • Medical Systems • Other Electronic Devices • Password Cracking • Photo Copiers • Photos and Images • Printers & Fax Machines • Software Applications Custom & Commercial • Software Design & Development • Social Media • Source Code Analysis • Spreadsheets • Telematics Systems • Websites • And More TESTIFYING EXPERIENCE • Civil & Criminal • Special Master • Plaintiff and Defense • Insurance, Corporate, Family Law • Justice, Superior & District Courts as well as Arbitration Hearing CASE BREAKDOWN • Civil Defendants-30%• Civil Plaintiffs-50%• Criminal...

Statistics - Statistician, Data Analytics, Criminal Justice Data, Police Data, Neighborhood Association Data, Gun Death Data, Public Health Data, Opioid Overdose Data, Census Data, Medical Data, Biostatistics, Proportions, Discrimination

...Holder of the PStat certification from the American Statistical Association, their highest designation, indicating professional statistician. Statistician with extensive experience in the social sciences and public health sectors. This includes, but is not limited to, criminal justice data experience regarding police stops, traffic stops, large jail data, prosecution data, and risk assessment tool validation. Other experience entails expertise with Violent Death Reporting System data including gun death data, drug overdose death data, accidental death data, and violence prevention. Homelessness data experience. Experience in biostatistics research methodology for various medical topics including brain tumors, effectiveness of neurological medical devices, hospital trauma department research, and gynecological diagnoses such as endometriosis and pudendal nerve damage....

Plumbing, Failure Analysis - Chemical Pipe Expert, Petroleum Pipe Expert, Pipe Failure Expert, Pipe Expert, Piping Expert, Pipe Explosion Expert, Pipeline Failure, Pipe Failure Analysis, Pipe Explosion, Pipeline Failures, Industrial Pipe Expert, Industrial Piping, Oil Piping, Natural Gas Piping, Petroleum Piping, B31.3

*500+ forensic engineering cases, $500 Million+ in cases involving nearly every kind of pipe and tubing found in residential, commercial, and industrial applications *Designed piping in every state in the U.S for over 500 large chemical, petroleum, and wastewater plants *35 years experience in design and failure analysis of pipes *Pipe Explosion Specialist * Customers include Dupont Chemical, Dow Chemical, 3M, BASF, Chevron, Exxon, Shell, Texaco, Amoco, Suncor Oil Sands and Central Arizona Project *Member, ASTM committees on standards development for Stainless and Alloy Tubular Products, Copper and Copper Alloys Pipe and Tube, and Plastic Piping Systems *Lectured at universities and provided continuing education, possessing the ability to explain complex matters in simple terms to students, juries and arbitrators *ASME Certified provider of continuing education in Material Science *Performed thousands of computer simulations and stress analyses including wind and seismic analysis of pipelines...

Aviation & Aerospace, Engineering - Business Operations (aviation), failure analysis, Human Factors, Aviation Software engineering and certification, aircraft design, controls, displays, hardware/software integration, Pilot Training, pilot-vehicle interface, Skydiving, Hanggliding, Parachutes, Wingsuits, Airplanes, Helicopters, Safety

...Timothy Sestak is an expert in the field of aerospace technology and systems integration. With an impressive background in both academia and industry, Dr. Sestak has cultivated an exceptional breadth of expertise in numerous critical areas, including sensors, aerodynamics, human factors, human-machine interface, system logistics, hardware and software development, integration, testing, and certification of aircraft systems. Furthermore, he possesses extensive experience and training in aviation safety and safety systems, ensuring a comprehensive understanding of the industry's most crucial aspects. As a Professor at Embry-Riddle Aeronautical University in the College of Aviation, he expertly guided students with his wealth of knowledge and practical insight. Dr....

Refrigeration, OSHA - Industrial process refrigeration, cold storage, ammonia, carbon dioxide, piping, insulation, design, design review, OSHA, EPA, mechanical code analysis.

...My engineering experience includes design and project management positions with a D/B contractor, a large food processor, an A&E firm (Deputy Director of the Food & Beverage Group) and my current consulting business. I'm registered as a PE in 11 states and have an NCEES Record. Current committee service includes the International Institute of Ammonia Refrigeration (Standards-CM and Government Relations-VM) and the American Society of Heating, Refrigerating and Air-Conditioning Engineers (Std 15, TC 10.1, TC 10.3 and TC 10.5; VM on all). I have revised portions of chapter 2 in the 2014 and 2018 editions of the ASHRAE Refrigeration Handbook and am completing calculations of CO2 piping capacities in chapter 3....

Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.

...With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi....

Mechanical Engineering, Safety - Guarding, plastics processing equipment, lockout-tagout (LOTO), Injection molding machines, thermoformers, blow molding machines, intellectual property, Industrial accidents, agricultural accidents, on product warnings, machine design, pumping-piping systems,

...He has worked in industry as a manufacturing and plant engineer and has been responsible for the safety of an industrial plant with over 300 employees, where he designed guards and worked extensively with plastic injection molding machines amongst many other industrial safety responsibilities. Mr. Hamilton is devoted to educating the next generation of engineers. He has developed and teaches a senior level Mechanical Engineering course entitled “Designing for Safety.” In this class he teaches principles of safe design such as the hierarchy of design, warnings usage, machine guarding and various hazard analysis techniques. He is in charge of senior design projects, where he guides students as they complete design projects to assist local manufacturers. A partial list of items Mr....

Hydrology, Meteorology - Flooding, Road Motor Vehicle Accidents, Ocean Flooding, Bridge/Pipe Hydraulics, Forensic Flood Damage Assessment, Agricultural Drainage, Mine Tailings Pond Failures, Dam Failure, Land Drainage, Drowning Assessment, Stormwater Modelling, Flood Risk Assessment, Dams and Reservoirs, Levee Failure

...I have over three decades of hydrotechnical engineering experience specializing in the modeling of surface water resource systems, forensic hydrology and hydraulics, and alternative flood control mitigation. He has been qualified as an expert witness in the Supreme Court of Canada and has experience testifying as an expert witness. In 2019, I received the Certificate of Fellowship (FEC) from Engineers Canada in honour of exceptional contributions to the engineering profession in Canada. Since 2002, I have been a technical reviewer for the Engineers & Geoscientists, of British Columbia carrying out confidential reviews of Professional Engineers for standard practice review and for technical support for potential disciplinary action by the association. As a former Toastmaster and enjoy public speaking and explaining technical terminology in lay terms to assist the court....

Computers, Electronics - Computer Architecture, Computer Systems, Personal Computers, Embedded Systems, Memory Systems, I/O Systems, Microprocessors, Instruction Sets, Media Processing, Power Management, Digital Design, Semiconductors

Donald Alpert, Ph.D. has over 40 years experience in the electronics industry leading the development of microprocessor and computer products at Intel, National Semiconductor, and Zilog. Over the past decade he has served as an expert on dozens of patent litigation cases, handling claim construction, infringement, and invalidity issues. Dr. Alpert has worked as a consulting and testifying expert assisting attorneys representing major high-tech corporations in Federal Court cases, International Trade Commission investigations, and Patent Trial and Appeal Board Inter-Partes reviews. Dr. Alpert also consults to assess patents for acquisition and pre-litigation review.

Neonatal - Perinatal Medicine, Obstetrics & Gynecology - High Risk Obstetric Care in the areas of L&D, Antepartum, Triage, Post Partum, and NICU. Legal Nurse Consulting, Standard of Care, Scope of Practice, Chain of Command, Communication, Team Work, Collaboration, Risk Management, Quality Assurance, Performance Improvement, Administration Responsibility

...Jan is aware of Evidence Based Guidelines for specific high risk areas of Nursing Practice involving Nurse Systems Assessment, Evaluation, Following Orders, Chain of Command, Reporting, Documentation, and follow through. Jan is expert in Standard of Care related to OB High Risk Nursing and NICU Nursing. Jan is a specialist in Scope of Practice. Jan is aware of specific Documentation requirements. Jan prepares for and we are prepared to testify under oath at Trial. As an EPIC Super User, Jan has mentored and trained users with the Electronic Medical Record. Jan believes in safe, high quality, collaborative healthcare for all patients, populations, and communities around the world. Jan believes the clinician's experience is improved via the use of the electronic medical record. Jan works with cutting edge technology in the fast-paced healthcare setting, transforming health systems to ensure quality patient care as a super user for EPIC....

Software Engineering, Computers - Telecommunications, wireless, Wi-Fi, wifi, Computer networking, Machine Learning, Neural networks, Deep learning, Smartphone, phone, smart TV, chromecast, Google TV, remote control, universal remote, Roku, Cloud computing, internet computing, web applications, HTML, HTTP, FTP Video streaming, CDN

...• Nortel Networks: Designed 3G mobile communication systems. • Adaptelligence: COO of health technology machine learning startup. • Sidespin Ventures: Managing director of venture capital syndicate. • NexStar Partners: Principal at early-stage venture capital fund. Education ------------------------ • Ph.D., Computer Science and Engineering, The University of Texas at Arlington, 2003. • MBA, Carnegie Mellon University. 2010.

Aviation & Aerospace, Human Factors - Aviation Crash, Airline & General Aviation, Flight Crew Error, Flight Training, Airplane Crash, Aviation Safety, InFlight Emergency, FAA, Maintenance Negligence, Crash Investigation, Aircraft Safety, Corporate Jet Accidents, Pilot Error, Controlled Flight Into Terrain, Loss of Control, Weather

...The ATC system is fractured and needs fixing!" Captain Botta has 35 years of Aviation Experience as an International Airline and Corporate Jet Captain with a General Aviation background. He also has 10 years experience in Private Practice as a former Licensed Professional Counselor. • Whistleblower case, Major Jet Charter company, 3/24 • Sky West/American Airlines, passenger dry ice injury, 1/24 • Wrong-surface event, 11/22 - 3/23 • Wrongful death case, 7/22 • Other cases opined on: pilot competency, pilot incapacity, medical issues • SEAK Expert Witness Training, 2/22 • SEAK Expert Witness Directory, 12/21 Captain Botta's Specialty is: Investigating Psychological and Emotional issues that may have led up to an Aircraft Accident or Incident....

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

...Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii. Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/Trenching, Crush, Traffic Control, Multi-Employer, Cranes, Confined Space, Demolition, Directional Drilling, Electric, Equipment, Machine Guarding, Excavation, Paving, Power Tools, Rigging, Shoring. Successfully implemented numerous nationally and internationally accepted safety management systems involving multiple training programs, inspection tools and accident investigation methods. Founder and principal of Raising the Standard Consulting Inc....

Toxicology, Environmental - Dram shop, DNA, Product Liability, Statistics, Drug Impairment, Chemical Impairment, Family Law, Due Diligence, Criminal, Civil, Drug Testing, Toxic Tort

...Burgoon served as a senior leader in various roles from leading teams of biostatisticians and bioinformaticians in designing and analyzing toxicology studies, to supervising toxicologists and public health scientists in the development of toxicological and dose-response assessments in support of the US EPA Integrated Risk Information System (IRIS). At the US Army, Dr. Burgoon led classified and unclassified programs and projects with a focus on the effects of chemical, biological, radiological, nuclear, and high yield explosives (CBRNE) on human health, ecological and agriculture systems. Dr. Burgoon’s expertise is in pharmacology, toxicology, biostatistics, exposure modeling, causal analysis, risk assessment, especially in the area of establishing causal relationships of chemical exposures to human effects and the development and application of mathematical modeling, machine learning solutions for computational pharmacology and toxicology. Dr....

Technology, Construction Defects - Crestron, Lutron, AMX, Control4, RTI, Elan, Kaleidescape, Programming, Television, Audio, Video, Lighting, Electrical, Luxury Home, Automation, Integration, LiteTouch, Vantage, Media Rooms, Conference Rooms, Home Theater, Power Surge, Lightning, Smart Home, Security, Surveillance, Noise Masking

Forty+ Years of Professional Experience with Luxury Home & Commercial Construction including Crestron, Lutron, AMX, Control4, LiteTouch, Vantage, Elan, Phast, Panja, ADA, Savant, Electrical, Lighting, Corporate Conference Rooms, IT and “Smart Home” technologies, Home Theater, Automation, Integration, Security, Personal Injury and MORE… • Skills & experience include system design, programming, construction and troubleshooting of a wide variety of high-performance technical systems. • CA Licensed Contractor for C& and C10 low and high voltage electrical systems since 1988, Lic. No. 534161 (Inactive) & 1101511 Expert Witness Experience - 2010 to Present: • About a dozen cases to date involving system design, technical failure, construction defect, personal injury, product liability, wrongful death, fire & lightning damage, system valuation and patent/trademark. • Involvement includes consultation, analysis, reports, deposition, litigation support and custom exhibits....

Pharmacist, Health Informatics - Patient Safety, Pharmacy Management, e-medication, e-prescribing, Health IT, health informatics, EHR systems, EHR audits, REMS, Drug Safety, Medication Errors, Root Cause Analysis, False Claims, HIPAA, Medical Records, Health Care Litigation, Medical Malpractice, Pharmaceutical, Pharmacovigilance

...Previously, Ajit founded Adviva Health, Inc a SaaS prescription medication history reconciliation and analytics platform designed to streamline the medication experience for EHR users. Ajit joined Surescripts in its early years and helped replace the paper prescription and start the first National E-prescribing network. At Surescripts, he last served as the Vice President of Clinical Quality and was responsible for corporate clinical quality, patient safety, and quality research initiatives. While at Surescripts, he also built and ran the first-of-its kind enterprise-wide clinical quality program – a critical component of company’s e-prescribing business solutions – to help prescribers, pharmacies, pharmacy benefit managers (PBMs), and healthcare system organizations achieve the three fundamental pillars of e-prescribing: accuracy, efficiency, and patient safety....

Emergency Medical Services, Transportation - Paramedic, EMT, Emergency Medical Technician, Emergency Medical Services, EMS, Standard of Care, EMT negligence, paramedic negligence, advanced airway, intubation, misplaced airway, CPR, wrongful death, in custody death, medical malpractice, ambulance crash, gurney drop, stretcher drop, patient drop

...Everlove has participated in the research, development and implementation of prehospital clinical care equipment, the design and implementation of EMS policy and procedure, as well as the initial and ongoing clinical education of EMTs and Paramedics. Also, Mr. Everlove directed an EMT educational program while also serving as a Principal Instructor. Serving as a Flight Paramedic on a Rescue Helicopter, Mr. Everlove has earned over 20 awards and commendations, including an award for Valor for an active rescue he completed after being injured during the operation. Mr. Everlove has worked within several Emergency Medical Services systems on an ambulance and a rescue helicopter and has served internationally in Nepal as part of a Disaster Response Medical Team after the 2015 earthquakes. Mr. Everlove has been featured on multiple episodes of the "Dr. Oz Show" for his expertise in Emergency Medical Services and Pre-hospital Emergency Care. References available upon request.

Accident Reconstruction, Engineering - Mechanical Engineering, Auto Accidents, Accident Biomechanics, EDR download, analysis, including TESLA, Work Place Accidents, Heavy Vehicles, Motorcycles, Pedestrians, Bicycles, Failure Analysis, Computer Models, Simulations, Finite Element Modeling (FEA), Human Factors, Vehicle Dynamics and Design.

...SPECIALIZED TRAINING; Vehicle Dynamics and Design, Vehicle Safety & Crash Reconstruction, Accident Biomechanics, Finite Element Modeling in Computer Aided Design, Advanced Mechanical Design and Failure Analysis (CSUS); Motorcycle Accident reconstruction, (Northwestern University); EDR Certification, Tech 1, Tech II, EDR Analysis Certification (Collision Safety Institute); Applying Automotive EDR Data to Traffic Crash Reconstruction (SAE Society of Automotive Engineers International); Expert witness training (SEAK Inc.); Advanced Accident Reconstruction Utilizing Human Factors course (Northwestern University); Photogrammetry for Collision Reconstruction (Lightpoint Data). HONORS / AWARDS; Distinguished Engineering Alumni Award, University of California, Davis. Outstanding Research Award, California State University. NASA Faculty Fellow. Chairman of the Technical Committee on Bond Graph Modeling & Simulation. SCS Society for Modeling and Simulation International....

Mechanical Engineering, HVAC - HVAC, plumbing, construction defects, construction engineering, energy, failure analysis, engineering, refrigeration

...The firm performs building system design work, forensic analysis, expert witness consulting, product liability consulting, construction cost analysis and construction claims consulting. The staff is comprised of professional engineers and former construction executives. We are licensed engineers and licensed contractors and have performed consulting work in over 30 states. Our clients include contractors, homeowner associations, commercial building owners, tenants, hotels, casinos, design professionals, manufacturers, law firms, insurance companies and individuals. We know what it takes to design, bid and construct projects. IEI was founded in 1994 in San Diego, California. We have offices in San Diego; Clearwater Florida; and Richmond, Virginia and provide consulting and expert witness services nationwide. Each of our engineers are licensed as professional engineers in multiple states. These licenses cover approximately 30 states....

Employment, Business Operations - Human Resources, CA Law, Harassment, Termination, Retaliation, Conflict, Resolution, Leave of Absence, ADA, FMLA, CFRA, Dispute, Hiring Practices, Salary and Compensation, Benefits, Discrimination, Training, Development, Organizational Structure, Management.

...Strong experience, education and expertise in California HR Compliance and Benefits, Employee Engagement, Diversity & Inclusion, Organizational Development, Efficiencies Improvements, Recruiting and Retention, Employee Relations - Conflict & Resolution, Benefits Development & Administration, Compensation Strategies, Navigating FMLA, CFRA, PDL, LOA, ADA, EEO, OSHA and Worker’s Compensation. 25 Years Accomplished Accounting, Budgeting, Business, Payroll Processing and Management, Superior knowledge of HRIS and accounting systems, Administrative software and graphic design programs. In addition, a lifetime of learning, creating and teaching art in all mediums and genres to children and adults. Extensive studies in Painting, Drawing, Mosaic, Jewelry, Sculpting, Set Design and Construction, Graphics, Web Design, Animation, Photography, Sewing, Crafting and masters work in Metal Smithing....

Traffic Engineering, Engineering - Transportation, Roadway design, Design immunity, Construction zone collisions, bicycles, traffic control devices and systems

Roadway design defect review of public, private roadway with determination of possible dangerous condition and liability; Design immunity; Compliance with standards of care; Construction zone collisions; Investigation of collision site – all roadway types, all land use types, all jurisdictions, all types of vehicles - including bicycles - and pedestrians. Largest settlement $5,000,000. Traffic Engineer (CA Reg. #1179), Civil Engineer (CA Lic. #36644), Transportation Engineer, General Engineering Contractor (CA Lic. #391026), Consulting City Traffic Engineer, Regional Traffic Engineer. Plaintiff/ Defense, Public/Private Sector Clients, Superior and Federal Courts across US and in Canada. ITE Life Fellow

Statistics, Employment - Statistical analysis,Database analysis & Programming, Mathematical modeling,Management science,Discrimination in hiring/promotion/retention ,Wrongful termination, Compensation/Pay Systems,California Wage & Hour analysis,Performance appraisal,Recruitment, selection, & testing,Survey research/analysis

...., for performance appraisal and management systems) ● Wage & Hour Law (e.g., analysis of timeclock records for break and overtime violations; extensively experienced in analyses for compliance with California Wage & Hour law and regulations) ● Compensation - Pay Systems In 100% of the cases in which Dr. Kane has served as an expert witness, his client has prevailed in the resolution of the case. Dr. Kane's range of expertise is extensive, having conducted the design and/or statistical analysis for hundreds of research studies worldwide in fields ranging from psychology, human resource management, medical science, biology, engineering, operations research, linguistics, archaeology, finance, and economics. Many of these studies have been published in major journals or as book chapters, accepted as dissertations, or implemented to improve the operations of businesses....

Automotive Engineering, Telecommunications - Automotive Systems, ADAS, Autonomous Vehicles, Self-Driving Cars, Adaptive Cruise Control, Blind Spot Monitoring, Lane Keeping, Automotive Software, Automotive Electronics, Collision Avoidance, Telecommunications, Networking, Carrier Ethernet, DSL, Wi-Fi, 5G, Wireless Transceivers, Telecom Standards

...Kanellakopoulos has designed and built telecom products such as DSL and Carrier Ethernet hardware and software, has conducted extensive research in adaptive control of nonlinear systems, with applications to automotive control systems, specifically driver assistance systems and active suspension systems. He is a Fellow of the IEEE, and a recipient of multiple international awards, and holds a PhD in Electrical Engineering from the University of Illinois at Urbana-Champaign.

Automotive, Slip Trip & Fall - Auto accident, car crashes, auto and motorcycle crash reconstruction, vehicle ergonomics, vehicular dynamics, Performance driving, defensive driving, human factors, Slip, trip and fall, human physicality, wire rigging and safety, climbing rigging and safety.

Henry Kingi Jr. is a highly accomplished professional in the field of stunts, with a career spanning over 30 years as a stunt person, stunt coordinator, and action designer. His areas of expertise include slip, trip, falls, (un)orthodox stunt rigging (wire/rope, pulley systems, box truss and pneumatic piston systems), vehicle safety, fire burn protection, vehicular dynamics and vehicle ergonomics. Through his extensive experience, Henry has had the opportunity to study human movement in numerous scenarios and understand the probabilities of sustaining injuries. He has also created and recreated car action sequences, both as a performer and action designer, which has provided him with an in-depth philosophical understanding of vehicle dynamics. With his wealth of experience, Henry is capable of creating or recreating accident scenarios, as well as analyzing and comprehending the causes of accidents....

Civil Engineering, Engineering - Water related system modeling and construction defect analyses, Design and PS&E, Drinking water flow and pressure, Wastewater and sewer backup, Storm water drainage and flooding, Groundwater and seepage, Tidal hydrodynamics, Water pumping and storage, Hydraulic and hydrologic analyses, Irrigation

...Lewandowski is a registered professional engineer in the State of California, and has over 35 years of professional experience in water related systems analysis, modeling and construction defect review, including: Drinking Water Systems – Wide range of project size and experience, from analyzing low water pressure conditions in HOA water distribution systems potentially caused by construction defects to City wide water distribution system master planning of piping, pumping and storage facilities to maintain water pressure and quality. Wastewater Systems – District Engineer services for a Sanitary District, including Master Plan review and development, modeling of peak wet weather flows, and project management of design and construction. Identified causes and resolutions for sewer backup and overflow conditions....

Architecture, Construction Defects - Architect & Engineer Negligence, Construction Defects, Fraudulent Change Orders, Construction License Agreement, Antitrust Complaint, Standard of Care Responsibility & Compliance, Warehouse Thermal Comfort, Bid Steering, Treachery & Self-Dealing Related to Professional Practice Industry Standards

...Expert Witness & Dispute Resolution 34 years Registered Architect 44 years Construction Executive 28 years Owner Representative 24 years Fred leverages his in-depth experience of leading cross-discipline teams of design & engineering professionals and construction management teams when presenting detailed opinions and support information in an understandable way. Fred’s work has included community boards, governing agencies, investors, General Services Administration - Offices of the Inspector General, FBI, multiple state courts (including Indiana, Illinois, California, Georgia, Florida, and New York), the New York County District Attorney’s Office (Labor Racketeering Unit, Construction Industry Strike Force), the New York City Office of Administrative Trials & Hearings, and the City of New York Police Department (District Attorney’s Office Squad)....

Software Engineering, Internet - Computer Science, Software Development, Mobile Software, Android, Java, Internet, Web, Distributed Systems, Software Architecture, Operating System, Database, Cloud Computing, Software Security, Artificial Intelligence, Machine Learning, Information Technology, Internet of Things, Embedded Systems

...His research is in the field of software engineering, and to date his focus has spanned the areas of software design and architecture, distributed and embedded systems, smartphone and mobile computing, internet and web technologies, and software dependability and security. Results of his research have appeared in more than 120 manuscripts, which have been published in peer-reviewed scientific conferences and journals. These publications have been cited more than 8,000 times according to Google Scholar. He has received numerous awards for his scientific contributions to the field of computer science, including the ACM SIGSOFT test-of-time award (2020), National Science Foundation CAREER award (2013), GMU Emerging Researcher/Scholar/Creator award (2013), and GMU Computer Science Department Outstanding Faculty Research Award (2011). In addition to his research activities, he regularly teaches a variety of both undergraduate and graduate courses in computer science at the university....

Security, Premises Liability - Hospital & Healthcare Security, Negligent Security, Workplace Violence, Crime Foreseeability, Mall-Retail-Store Security, Hotel & Hospitality Security, Apartment Buildings & Office Security, Parking Lots-Garage Security, Violent Crimes, Casino Security, Bars & Nightclubs and School Security.

...Marcisz has served as Executive Director of Security and Internal Security Consultant for one of the largest Healthcare Systems in the United States. Security Programs under Bill’s leadership have attained national recognition, including: a Top Ten Ranking in Security Magazine’s Annual "Security 500", recipient of the prestigious IAHSS Lindberg Bell Award, and the ASIS Outstanding Security Performance Award for Distinguished Security Program. Mr. Marcisz is among the few Security Professionals to have been recognized by his peers in the industry by being selected to receive the ASIS Outstanding Security Performance Award for Security Director....

Law Enf & Criminal Justice, Communications - 911 Center Ops, Computer Aided Dispatch, Public Safety Project Management, 911 Technologies, Mobile Radio Operations & Design

...Marin, a semi-retired consultant in the field of public safety emergency service call processing and dispatching systems ranging from facilities to technical system to operations. He has over 45 years experience in the application of automated systems to public safety organizations and their operational impacts with specific emphasis on computer, telephone and mobile radio communications systems. Collectively, these technologies support what is commonly known as the 9-1-1 emergency telephone system operated from facilities known as Public Safety Answering Points (PSAPs). This experience includes all the technologies associated with the design of Computer Aided Dispatch (CAD), Records Management (RMS), Jail Information Systems (JIS), Mobile Data Terminal (MDT) systems and two-way radio systems, both trunked and conventional. Mr....

Aviation & Aerospace, Automotive - Aerospace Engineer, Aircraft Engineer, Failure Investigation, Failure Analysis, Aircraft Safety Risk Assessment, Flight controls systems design, Human Factors, Hazardous Operations, DOD Secret Top Secret eligible, Space Vehicle Design, Fact Finding Event Reconstruction, Throttle Control, ABS

...He has specialized in aerospace design and operation of flight and space vehicles with an emphasis on flight safety and mission assurance. Anthony is a past technical leader of an aircraft accident and incident investigation board comprised of engineers, pilots and legal counsel for a major commercial aircraft manufacturer. In this role he has studied, understood, created reports and defined design changes to resolve aircraft safety issues. Over his career he has conducted numerous analyses for root cause to determine failures attributed to design flaws, human error, human workload, improper manufacturing and inadequate maintenance. He has designed aircraft systems, conducted testing and performed analysis that have led to aircraft certification with the FAA and the CAA. His experience includes interface with aircraft manufacturers, space vehicle manufactures, commercial aircraft operators and government agencies....

Architecture, Construction - Healthcare Architecture, OSHPD, BIM, Integrated Project Delivery, Lean Construction, Construction Defects, Construction Claims, Quality Control/Quality Assurance, Hospitals, Schools, Slip and Fall, ADA, Contractor Non-Conformance, NAVFAC, Change Orders, Owner Payment Claims.

...Integrated Project Delivery and Lean Construction consultant. 20 years Architecture Experience -Design and Construction Administration experience in -Healthcare (Large California Hospitals and Medical Centers), Multi-family, Retail, Tenant Fit-out, K-12 Schools, NAVFAC contract administration and Office Buildings. 20+ years Owners Representative/Construction Administration experience in - multi-site K-12 school district design and construction program (including multiple prime contractor projects) and California Hospital and Healthcare portfolio management. Developed and deployed innovative practice, design, production and delivery methodologies. Created globally distributed outsourced CAD and BIM teams through integrated design and construction workflows for multiple architecture, contractor, and owners including BIM execution plans, and linking BIM files to the owner's facility and space planning systems....

Medical Devices, Intellectual Property - Mechanical Engineering, Forensic, Medical Device, Nitinol, Biomedical, Patent,IP, Consumer Products, Failure Analysis,Fracture,Fatigue, Truck Rollover, Crashworthiness, Finite Element, FEA, Reliability, Cell Phone,IVC, Composite Material,Piping,Equipment,Machinery,Food Processing,Personal Injury

...Products include stent, stent-grafts, AAA devices, IVC Filters (Inferior Vena Cava Filters), balloons, guide wires, feeding tubes, intubation devices, Intragastric Abdominal Balloon Weight Loss Systems, Back Pain Reduction Systems, Spinal Surgical Devices, Orthotic Devices, and other implantable or external devices. He has performed design analysis, failure analysis, reliability, and patent investigations. Dr. Parnell brings both breadth and depth of experience to clients. He has over 44 years of professional consulting experience, has taught both graduate and undergraduate University classes (Visiting Professor at Stanford University & Adjunct Professor at Santa Clara University), and has also worked in industry. His industrial positions include sectors such as vehicle (truck & auto), manufacturing, software, hardware, medical devices, and telecommunications equipment....

Firearms & Ballistics, Accident Reconstruction - firearm, ammunition, ammo, ballistic, gun, cartridge, bullet, projectile, manufacture, load, weapon, antique, reconstruction, training, design, engineering, forensic, shooting, crime, scene

...• Ongoing resource/consultant to numerous reloading equipment, projectile, and firearm manufacturers, including the areas of safety, training, and design flaws. • Designed and manufactured firearms and fire control systems. • Certified and testified in crime scene reconstruction and shooting accidents. • Recognized in the firearms industry as an expert in antique and replica cartridge development and manufacturing, including the production of proof loads. “Official” ammunition benchmark for half a dozen firearm manufactures. • Provide educational opportunities on the ammunition manufacturing process and corresponding toolmarks for law enforcement agencies, specifically for their crime lab and firearm unit technical staff. I have provided this training for such agencies as the California Criminalistics Institute (CA-DOJ), Los Angeles Police Department Firearms Unit, Los Angeles County Sheriff’s Department Crime Lab, and Orange County Sheriff’s Department Crime Lab.

Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle,Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe, HVAC, CPVC, Oil & Gas, Welding

...He has taught metallurgical engineering course topics in Principals and Applications of Steel Alloy Design at the University of Pittsburgh School of Engineering. He was awarded outstanding graduate, presidents’ list, graduate with distinction, and high honors; his education was focused in failure analysis, mechanical behavior of materials, corrosion and degradation, and physical metallurgy....

Aquatics Safety, Construction - Drownings, Swimming Pool and Aquatic Related Accidents, Aquatic Accident Reconstruction, Swimming Pools, Spas / Hot Tubs, Waterslides / Aquatic Amusement Rides, Swimming Pool Design / Construction, Swimming Pool Operation / Maintenance, Swimming Pool Equipment, Aquatic Codes and Standard of Care

...He has extensive experience designing and overseeing the construction administration of swimming pools and investigating the spectrum of mechanical system and structural failures. Reynolds has designed more than 200 major commercial and residential swimming pools and spas nationwide. In obtaining his Bachelor of Science in Civil Engineering and through his professional experience designing swimming pools and investigating structural failures, Reynolds is accustomed to reviewing the often-complex seismic and geotechnical issues that play a major role in swimming pool projects. As a youth, he swam competitively and played water polo through college, which he later coached at both the high school and collegiate level. He trained as a junior lifeguard then qualified and served as a lifeguard. He is also an experienced swim instructor and aquatic sport camp counselor. He entered the industry after graduating from Loyola Marymount University....

Mechanical Engineering, Real Estate - plumbing, pipe, re-pipe, leaks, failures, Inspection, construction, water damage, feasibility, epoxy liner, CPVC, Aquatherm, PEX, Galvanized, copper, risk assessment, machinery, insurance, defect, standard of care, Blockchain, smart contract adjudication.

...Technical specialties include plumbing systems (failures, leaks, defects and corrosion), building envelope failures resulting in mold or water damage, Real Estate transactions, mechanical failures due to improper maintenance or operation, Investigation, testing, and report writing. Excellent public speaking skills with the ability to explain complex matters in simple and accessible terms. Knowledgable in recent technologies such as blockchain, digital twin, and digital twin applications for the engineering professions. Experienced in cross border and international engineering practices. Registered professional engineer in California and Washington. Began career working as a mechanical fabricator and design engineer. Recruited by The Northrop Corporation developing composite structures for military aircraft.  Joined Hughes Aircraft Space and Communication Systems, designing precision mechanisms for satellite ejection from an orbiting vehicle. ...

Electrical Engineering, Industrial Design - Industrial Automation, Building Automation, Power Systems, Electrical Design & Construction, Battery Technology, Power Electronics, Control Systems, Manufacturing, Water Treatment, Wastewater Treatment, Arc Flash, Fires and Explosions, Code Compliance

Forensic Electrical Engineer with over a decade of experience in the design, construction, testing, and commissioning of power and automation systems for utilities, industry, and commercial applications. Expert in determining the cause of electrical and control system failures, electrical fires, arc-flash incidents, battery fires, and utility power systems. Licensed in most western states. Certified Automation Professional (ISA), Certified Fire & Explosion Investigator (NAFI).

Aviation & Aerospace, Human Factors - Decision Making, Airline Operations, General Aviation, Training, FAR’s, Incident Investigation, Operations, Compliance, Pilot Error, Crew Performance, Pilot Fatigue, Crew Resource Management (CRM), Situational Awareness, Turbulence Injuries, Passenger Disruptions, Navigation and Communications

...aviation-related technology, flight crew procedures, and in leading committees and project teams Federal Aviation Administration (FAA) type ratings on several aircraft, including various versions of the B747, B777, DC10, and B737 Piloted and instructed on numerous general aviation aircraft Former Chairman of the Air Line Pilots’ Association International (ALPA-I) National Air Traffic Services Group Former Regional Vice President for the International Federation of Air Line Pilots’ Associations (IFALPA) responsible for promoting the highest level of aviation safety worldwide Former ALPA Boeing 747 Fleet Safety Coordinator at United Airlines, responsible for investigating accidents and incidents occurring on United Airlines’ B747 fleet worldwide Former Chair of UAL Pilot-Dispatcher Committee Served on the Air Traffic Procedures Advisory Committee (ATPAC) reporting to the FAA Administrator on new or significantly revised air traffic control (ATC) procedures and concepts Key participant in design...

Mechanical Engineering, Motorcycle - ATV, specialty machinery, hydraulic brakes, drive train, zip line brakes, Quads, construction machinery, suspensions, steering, accidents, off road vehicle, side by side, off road tires, theme park ride, utility vehicle, on road vehicle, recreational vehicle, vehicle dynamics, themed show equipment

Degreed mechanical engineer with 30+ years of continuous design experience. Licensed P.E. in CA and NV Extensive experience with: ATV and side by side suspension design, calibration and testing. ATV and side by side steering and brake system and component design and testing. ATV and side by side drive train design and testing. On road truck suspension design. Specialty equipment design. Theme Park Ride design experience Theme Park Ride 3rd party review experience with significant finds. Theme Park Show Equipment design. Zip Line Brake system design. Extensive knowledge of materials, finishes, manufacturing methods. Experienced in stress analysis and rigid body dynamics analysis. Experienced in structural carbon fiber design and analysis.

Software Engineering, Electronics - audio, video, Digital Signal Processing (Dsp), source code review, patent, copyright, wireless, sensors, user interface, linux, operating systems, open source, electronics, hardware, embedded systems, firmware, computer graphics, computer vision, smart devices, network protocols, USB, C/C++, IoT

...* Experience with server, desktop, embedded and mobile software and embedded systems and firmware. * Experience developing proprietary trading software and strategies for the crypto and futures markets. Experience as an algorithmic trader. * Experience with operating systems such as Windows, Mac OSX and Linux. * Designed, developed and engineered the hardware and software of multiple successful consumer electronics audio and wireless products, sold worldwide. * Academic researcher and teaching assistant at Leuven Catholic University (KUL) and Brussels Free University (VUB), writing and publishing papers on audio signal processing and human-computer interaction research topics, presenting papers at international conferences and teaching students. * Previously founded a consumer electronics company, Percussa, in the pro-audio industry....

HIPAA - Healthcare Futurist, HIPAA, data, Consultant, EHR, Pharma, Health Systems, HIEs,

...Extensive clinical data analytics practice working with a wide variety of clinical datasets from payers, health systems, pharma, and HIEs. Successful track record in delivering health data products based on data generated from user research and using design thinking methods. Named one of HIMSS Future 50, and published author and presenter on FHIR at HL7 Roundtables, and AHIMA on clinical data integrity and burnout. Active advisor and angel investor in early-stage digital health startups. Published author and confident speaker, with extensive healthcare network. Omar has 10+ years of experience in consulting US Payers and Providers to improve healthcare using data science and data visualization. Over his career, Omar has worked with a varied number of clients including Kaiser Permanente, Blue Cross Blue Shield, San Mateo Medical Center, University of South Alabama, University of San Diego, John W. Brick Foundation, and Orchid Health, to name a few....

Environmental, Geology

...Performed investigation and monitoring, remedial planning and cost estimating, and designed and implemented vapor mitigation system. Provided technical support and expert testimony in California Superior Court for successful application for default judgment and assignment of California UST Fund rights from the UST operator to client. Confidential Superfund Cost Allocation, South Gate, CA Senior director and hydrogeologist representing a defendant in a multi-party cost-allocation case for comingled groundwater plume contaminated by PCE, TCE and daughter products and 1,4-dioxane. Successfully demonstrated that defendant

Mechanical Engineering, Plumbing - HVAC, plumbing, construction defects, construction engineering, energy, failure analysis, engineering, refrigeration

...The firm performs building system design work, forensic analysis, expert witness consulting, product liability consulting, construction cost analysis and construction claims consulting. The staff is comprised of professional engineers and former construction executives. We are licensed engineers and licensed contractors and have performed consulting work in over 30 states. Our clients include contractors, homeowner associations, commercial building owners, tenants, hotels, casinos, design professionals, manufacturers, law firms, insurance companies and individuals. We know what it takes to design, bid and construct projects. IEI was founded in 1994 in San Diego, California. We have offices in San Diego; Clearwater Florida; and Richmond, Virginia and provide consulting and expert witness services nationwide. Each of our engineers are licensed as professional engineers in multiple states. These licenses cover approximately 40 states....

Civil Engineering, Land Surveying - Civil Engineer, Land Surveyor, Geomatics Engineer, Boundary Disputes, Easements, LiDAR, Laser Scanning, UAV, Drone, Aerial Photogrammetry, Change Detection, Aerial Photo Analysis, Floodplains, Flooding, Hydraulics, Storm Drains, Sanitary Sewers, Water and Wastewater Treatment, Landslides, Wildfires

...His experience ranges from the design, construction and operation of large scale water and wastewater infrastructure facilities to the design and construction of amusement theme parks, subdivisions and residential, commercial and hospitality projects. He also has extensive experience as technical expert in litigation support matters involving massive flooding events, storm drain and sanitary sewer systems, landslides, land subsidence, change detection, code compliance, construction defect, origin and cause investigations, failure analysis, boundary and easement disputes, and standard of care. He has testified as an expert witness in California and Nevada on a range of issues. Mr. Stoner has also assisted consulting and legal teams to develop the macro perspective on litigation support matters through use of remote sensing techniques, such as aerial and terrestrial LiDAR, 3D laser scanning, multi-spectral imaging and photogrammetry to gather additional facts otherwise undetected....

Construction Defects, Construction Engineering - Waterproofing, Building Envelope, Windows and Doors, Leak Investigation, building Enclosure, Below Grade, Above Grade, Roof, Planters, Construction Standard Of Care, Water Damage

Barry Taheri is founder and principal of California Consultants and one of the most sought-after Expert Witnesses in Building Science, Building Enclosure and Waterproofing Systems. Your case will benefit from the experience and knowledge that comes from Barry Taheri and California Consultants critical role in the success of over 80 Litigation Support Projects, 100 New Construction Projects and 200 Forensic Projects. Barry maintains active general contractor licenses in multiple states, in addition to several system and manufacturer certifications....

Energy, Engineering - Solar,PV,Photovoltaics,Energy,Batteries,Construction,Electric Utility,Intellectual Property,Patent,Project Development,Electrical Engineering,Asset Management,Contracts,Electricity,Generation,Renewable Energy,Solar Energy,Solar Power,Solar Installation

...Weiner has also taught advanced solar system design and project management at UC Berkeley....

Electrical Engineering, Software Engineering - Smart Phone Accessories, Bluetooth, Wireless, USB, Embedded Systems, Forensic Engineering, Firmware, Source Code, Design Review

I have over 49 years experience in Systems, Electrical and Software Engineering, Engineering Management and Expert Witness. I have worked on Embedded Systems, Smart Phone Accessories, Bluetooth, USB, Handheld, Data Communications. I have performed software and design reviews and done forensic engineering. Sample projects include handheld wireless medical sensor; 150 MSPS automotive sensor interface; Smart Phone interface for survey grade GPS device; the secure, wireless communication subsystem for a line of consumer medical products.

Automotive, Motorcycle - Engine, Motor, Defect, Damage, Failure, Exhaust, Emission, Carbon, Monoxide, NOx, Test, Measure, Defeat Device, Computer, Control, Software, Calibration, Tuning, Performance, Power, Fuel, Economy, Combustion, Leak, Heat, Burn, Fire, Gas, Diesel, Motorcycle, Autocycle, Bike, Bicycle, Battery, Lemon

...While working for Ford Motor Company, he applied his failure analysis and troubleshooting skills to discover many design- and manufacturing defects and implemented affordable solutions before mass production started to prevent recalls. His deep technical expertise allows him to analyze defects, and products in detail, and explain clearly the main issues that the judge and jury need to internalize in order to comprehend the essence of the case. His extensive educational experience in academia allows him to help judges and jurors understand the topic they are dealing with. Dr. Will has invented, designed, built, and licenced automotive products such as heat management systems and engine software strategies that reduces emissions and fuel consumption. Therefore, he is also experienced in IP, patent infringement law, and developing claim charts....

Software Engineering, Computers - Cybersecurity, Software Architecture, Artificial Intelligence, Cryptocurrency / Blockchain, Speech & Face Recognition, ESI Protocol, Social Media Forensics, Biometric Identifiers, Code Review, Patent Infringement ,Trade Secret, IPR, PTAB, Claim Analysis, Forensic Data Extraction, BIPA

...- In addition to his blockchain development experience, he designed the first cryptocurrency arbitrage system....

Electrical Engineering, Software Engineering - Electronics, Control Systems, Embedded Systems, Robotics, Signal Processing, Drones, UAV, Software, Patents, Intellectual Property, Databases, Computers

...Direen has over 35 years of experience as an engineer designing and developing systems in the electronics and software industry. He has significant experience as an expert witness supporting counsel and testifying in complex patent infringement cases. His expertise includes electronic systems, control systems; embedded systems design and development; databases; control of UAVs/Drones; product reverse engineering; and intellectual property. Dr. Direen has a broad base of knowledge in electronic and software systems gained from a long career developing a wide range of products and systems. Dr. Direen has reversed engineered a variety of complex systems over the years, including: media players, modems, modem compression algorithms, coriolis mass flow meters, database systems, and a range of other products to support patent infringement cases generating detailed claim charts and writing expert reports to demonstrate infringement....

Construction Defects, Premises Liability - Architecture, Construction, Construction Defect, Fire Protection, Fire Suppression, Fire-Resistive Assemblies, Residential Construction, Commercial Construction, Building Codes, Premises Liability, Slip & Fall, Trip & Fall.

Registered architect with NCARB certificate in twenty states (licensed in more states than are listed in this directory), with an active design and forensic practice. As a forensic architect, his experience includes among other things, performing analysis of standard of care in building design and construction projects; performing analyses of building systems including roofing systems, window and door systems, exterior wall cladding systems, waterproofing and foundation systems, with a specialization in fire-resistive assemblies and active fire-protection systems. His experience includes premises liability investigation and analysis of accident sites relating to the built environment, both indoors and outdoors. As a design architect, his practice includes traditional architectural practice including building design, building code analysis & application, and services during construction....

Firearms & Ballistics, Business Operations - Firearms, inherent design flaw, gun holsters, ammunition, ballistics, firearms training, gun sales, gun ranges, gun rentals, gun range safety, risk management

...I performed various roles from; designer, project manager, firearms training director, CFO, CEO, COO, and CMO, while scaling the business from $0. While I have not completed formal education, I do have a certificate of completion from the Stanford Graduate School of Business, “Stanford Ignite,” for completing MBA level coursework at an accelerated pace. Of a class of approximately 40 students, I was one of only two non-degreed students allowed entry, as the prerequisites included an undergraduate degree. Possessing over 10 years of military experience, I was fortunate to have served within some of the highest levels of Special Operations. US Army Green Berets are considered the US Department of Defense's premier military training and indigenous force multiplier. Master's of unconventional warfare, US Army Special Forces operate in some of the harshest environments in the world....

HVAC, Plumbing - Engineering-Mechanical, Fire Protection, Energy Conservation, Sustainability, Indoor Air Quality, Ventilation, Heating, Cooling, Air Conditioning, Fire Sprinklers, Colorado PE, Utah PE, Wyoming PE, New Mexico PE

...Mechanical Engineer, 46 years HVAC, Plumbing, & Fire Protection engineering design, facilities engineering, energy analysis, systems commissioning, troubleshooting, expert witness 7 projects, expert witness subconsultant 49+ projects, and sustainability consulting. Presented over 54 seminars to organizations in the HVAC field. Past President and current Director Rocky Mountain Chapter ASHRAE (American Society of Heating, Refrigeration, and Air Conditioning Engineers); Colorado Renewable Energy Society (CRES) Board of Directors and Secretary; US Green Building Council (USGBC) - Colorado Board of Directors, Programs Coordinator, and Greenbuild 2006 Host Committee Chair. 28 year member of Toastmasters; Member Colorado Earthquake Hazard Mitigation Council; Past member: AIA Colorado Committee on the Environment, AEE, RMAEE. Keynote Speaker for the Rocky Mountain Chapter ASHRAE 2004 Annual Tech Conference.

Human Factors, Warnings & Labels - Human Factors Engineering, Ergonomics, Hazard Analysis, Safety Procedures, Warnings, Warnings Adequacy, Warning Systems, Product Liability, Perception-Memory-Cognition, User Distractions/Diverted Attention, Task Analysis, Industrial Accidents

...He has performed HF-related work evaluating, designing, developing, and testing user-interactive-systems for a wide range of industrial, governmental, and individual clients. His forensic experience has included applying HF scientific principles, preparing analysis reports, providing expert opinions, and testifying in cases involving: hazard analysis; evaluating safety systems; assessing the necessity for and adequacy of warnings, instructions, operator manuals, work practices, & organizational procedures; addressing product design and product liability issues; and investigating incidents involving user distractions or diverted attention situations.

Electrical Engineering, Telecommunications - electrocution, electronics, networks, wireless, cellular, 5G, GPS, radar, LTE, cell phones, cell towers, base stations, SMS, quality sciences, applied research, RF, interference, radio, satellite, Internet, control systems, instrumentation, appliances, RFID, mobile, software, geolocation, geofencing

...Mark investigates electrical, electronic, wireless, and telecom systems. Cases revolve around design, use, defects, and malfunctions for legal, insurance, commercial, research, and government matters. Mark is experienced in the design, analysis, and testing of satellite, cellular, 5G, Internet, wireless, Wi-Fi, RF, RADAR, emergency and public safety comm systems, networks, telecom standards and protocols, data communications, GPS, instrumentation, and control systems. Understanding variability is crucial to controlling and improving processes. Mark brings scholarship and practical experience in the quality sciences and applied research to help clients understand variability and improve their outcomes. The financial and legal consequences of improper scientific research methods are enormous. With his education and experience in statistics and applied research, Mark aims to ensure solid and defensible methods inform decision making.

Engineering, Statistics - False Claims Act, Radar Systems, Antennas, Electromagnetic Interference/jamming, Signal Processing, Systems Engineering, Project Management, Risk Management, Quality, Reliability, Digital Engineering, Government Contracting

...Work experience includes Industrial Engineering, Systems Engineering, Electrical Engineering and Electromechanical Control Systems. Provides consulting services to companies functioning as Chief Engineer overseeing two customer projects involving twenty engineers and $8 million of project funding. Expert in engineering project failure root cause analysis. He is frequently assigned to struggling projects to diagnose, correct and resolve technical and managerial deficiencies. Teaches four Graduate engineering courses at University of Colorado and provides professional training in Systems Engineering, Radar System Engineering and Product Development....

Human Factors, OSHA - Warnings Design & Testing , OSHA, Product Safety, Industrial Safety, Chemical Safety, HazComm & FHSA labeling requirements, Electrical Safety, Construction Safety, Fall Protection, Personal Protective Equipment, Consumer Product Safety, Human Factors, Perception-Reaction time, Backup Alarm

...He has designed and tested on-product warning labels as well as product instructions for consumer and for industrial products. He has published several papers on the use of OSHA's "General Duty" clause to cite employers for ergonomics hazards. He has also published several papers evaluating the effectiveness of backup alarms. With his CSU-Pueblo students, he has published papers on hazard analyses of consumer and industrial products. Dr. Purswell has performed usability testing on medical devices, including developing the test protocols and conducting usability testing with different populations. Dr. Purswell & his co-authors were named as Finalists for the 2014 Health Devices Award Achievement by the Emergency Care Research Institute. Dr. Purswell has been retained by attorneys around the US to evaluate the ergonomics and safety aspects of matters in litigation....

HVAC - Carbon Monoxide Poisoning, Site Discovery for Carbon Monoxide Poisoning, Venting Issues Related to CO, Carbon Monoxide Inspections, Ventilation, System Design Flaws, Mechanical Deficiencies, Indoor Air Quality

...He has a Utah State Contractors License 12250871-5501 with classifications S410 and S350 He has worked on 16 cases as an expert witness related to carbon monoxide poisoning due to improper venting, defective equipment, improper service protocols, and installed system deficiencies. Rogers other specialties include: Identifying and solving complex problems related to HVAC mechanical deficiencies, indoor air pollution, HVAC system design flaws, venting issues, and air distribution design inadequacies. His Curriculum Vitae provides insight into his qualifications as an expert witness in the many fields listed. He is: NATE Certified, EPA Certified, an RMGA Certified Technician, RSES-Cosa Carbon Monoxide Certified, HVAC Excellence Certified Carbon Monoxide Inspector, Quality Management System Certified-Chitester Management System, Inc. He works exclusively with legal representation for plaintiffs.

Mechanical Engineering, HVAC - Appliance malfunctions, Building assessments, Carbon-monoxide incidents, Electrical equipment failures, Fire sprinkler system malfunctions, Forklift/machine accident evaluations, HVAC, HVAC design, Industrial accidents, Pipe failures, Solar panel failures, Wind/flood damage, Winter Freeze-ups.

...Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. PROFESSIONAL LICENSURE: ~ Registered Professional Engineer: AZ, CA, CO, CT, FL, HI, IL, MA, MD, ME, MI, MN, NC, NH, NJ, NY, NV, OH, PA, RI, VA, VT, & WI ~ Certified Energy Manager (CEM) as endorsed by the Association of Energy Engineers ~ Certified Energy Auditor (CEA) as endorsed by the Association of Energy Engineers ~ LEED Accredited Professional as endorsed by the U. S....

Architecture, Construction Defects - Architect & Engineer Negligence, Construction Defects, Fraudulent Change Orders, Construction License Agreement, Antitrust Complaint, Standard of Care Responsibility & Compliance, Warehouse Thermal Comfort, Bid Steering, Treachery & Self-Dealing Related to Professional Practice Industry Standards

...Expert Witness & Dispute Resolution 34 years Registered Architect 44 years Construction Executive 28 years Owner Representative 24 years Fred leverages his in-depth experience of leading cross-discipline teams of design & engineering professionals and construction management teams when presenting detailed opinions and support information in an understandable way. Fred’s work has included community boards, governing agencies, investors, General Services Administration - Offices of the Inspector General, FBI, multiple state courts (including Indiana, Illinois, California, Georgia, Florida, and New York), the New York County District Attorney’s Office (Labor Racketeering Unit, Construction Industry Strike Force), the New York City Office of Administrative Trials & Hearings, and the City of New York Police Department (District Attorney’s Office Squad)....

Premises Liability, Construction Defects - OSHA, construction, slips/trips/falls, storm damage, water intrusion, roofing systems, warranty inspections, civil engineering, structural engineering, building collapse, property condition assessment, building codes, forensic engineering, engineering expert, construction accidents, personal injury

...Designed drainage systems for the government while an officer with the United States military. Cost estimating for various projects exceeding $500 million. Design document creation and management of high-rise construction in Manhattan. marketplace. Management of telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating. Directed and managed all water distribution system and sewer system work while working as a contractor to the New York City Department of Design and Construction. Forensic work related to evaluation of structural steel systems with commercial building construction and insurance-related claims due to storm damage on commercial and residential structures.

Construction Defects, Construction - Forensic investigation, building pathology, failure analysis, technical reporting, construction claims, litigation support, insurance, building code, EIFs, stucco, building envelope, facades, rainscreen, infrared, moisture, structural capability, energy conservation, contract analysis.

...Furlong has 21 years of experience with construction, project coordination and design, remodeling, and field inspections of building systems for residential, and commercial low and high-rise properties. He has successfully completed more than 600 unique and custom projects while as a general contractor. His builder background experience ranges from high-end new custom home construction, interior renovations and additions, to green building and energy efficient homes, historical renovations, timber-framing, and creating elaborate custom interiors in prestigious estate-sized homes. This experience gives Mr. Furlong the unique qualifications to testify as an expert in construction matters. As a professional consultant, Mr. Furlong provides services in the forensic investigation field related to construction defects, Building Code compliance, contract review and analysis, construction delay analysis and investigation....

Information Technology, Forensic Science - Data Science, Digital Forensics, Analysis, Examination, Investigation, Collection, Preservation, eDiscovery, Discovery, Aggregate, Presentation, Communication, Education, Legal Technology, Litigation Support, Diversity, Equity, Inclusion, DEI

EDUCATION & PROFESSIONAL CERTIFICATIONS Current: • GCFE – (Global Information Assurance Certification) Certified Forensic Examiner Legacy: • EnCE – EnCase Certified Forensic Examiner • AA in Graphic Design, University of the District of Columbia • A+ CompTia Certification • Network+ CompTia Certification PUBLICATIONS • The Art of Consultation: Creativity in Forensic Investigations (July 2021) • The Main Event: Windows Event Logs are Tools for Investigators – Issue #6 of the Finely Tuned Series – Corporate Counsel Business Journal (November 2020) • Upward Mobility: The Important of Mobile Device Management – Issue #5 of the Finely Tuned Series – Corporate Counsel Business Journal (November 2020) • Retention Attention – Issue #4 of the Finely Tuned Series – Corporate Counsel Business Journal (November 2020) • Deploy the Asset – Issue #3 of the Finely Tuned Series – iDS Blog (September 2020) • Puzzle Pieces – Issue #2 of the Finely Tuned Series – Corporate Counsel Business Journal (November...

Construction Defects, Engineering - Building Enclosures, Exterior Walls and Cladding Systems, Fenestrations and Glazing Systems, Waterproofing Systems, Roofing Systems, Water Intrusion Investigations, and Wind Damage Investigations

I am a Professional Engineer and a Certified General Contractor with 20 years of consulting and engineering experience, specializing in the design, evaluation, inspection, and testing of building envelope systems, including exterior wall claddings, glazing systems, fenestrations, waterproofing systems, and roofing systems, for new and existing structures. I am a member of various industry organizations and an accredited LEED professional. I have worked on hundreds of projects throughout North America and the Caribbean. I enjoy providing technical expertise on all types of building projects to develop and construct high-performance building enclosure systems. I have extensive experience conducting forensic evaluations on buildings with envelope performance problems, which often lead to remedial design and management of restoration programs and expert witness testimony.

Accident Reconstruction, Mechanical Engineering - MOT, Temporary Traffic Control, Construction zone, Heavy vehicle, Commercial vehicle, Headlight and lighting analysis, Infotainment data analysis, Visibility and photometric analysis, Vehicle EDR black box analysis, Human factors analysis, Video analysis, Drone Pilot. Working from Sarasota, FL.

...Barshinger applies the principles of design, analysis, testing, and safety to forensic evaluations involving traffic accident investigation and reconstruction. His professional background includes mechanical engineering positions in the manufacturing and consulting industries. His manufacturing experience includes assembling and testing electronic components and various products. Mr. Barshinger has been involved in product defect allegation cases involving a wide range of products. He has received specialized training in accident reconstruction and traffic collision investigation. His training also includes preserving and analyzing data stored in vehicles such as airbag modules, engine control modules, GPS, and infotainment systems, as well as video footage analysis from various sources. He conducts vehicle accident and mechanical component investigations for clients throughout the southeast United States. Mr....

Structural Engineering, Construction Engineering - Structural Failure / Collapse, Structural design, Structural Analysis, Structural Inspections, Building Code Analysis, Construction Defects, Forensic Engineering, Hurricane Engineering, Failure Analysis, Wind Engineering, Flood Engineering

...We have significant experience with fire, wind, vehicular impact, subsidence, water, insects, improper design, and faulty construction. Dr. Bradford is a certified Neutral Evaluator for Sinkhole disputes in the State of Florida. Dr. Bradford has worked on approximately 250 projects involving insurance claims. He has also testified as an expert witness in court, by deposition, in mediation, and in non-binding arbitration. Dr. Bradford is a licensed Professional Engineer in 8 states and a licensed Special Inspector (Threshold Inspector) in the State of Florida. He has been the Special Inspector for a variety of structures involving a variety of structural systems.

Pharmacology- Clinical, Toxicology - Autopsy, Capital Crimes, Controlled Substance, Dispensing, DUI, Dramshop, Drug Screen, Evidence, Medication Therapy Management, Pain Management, Pharmacology, Postmortem, Toxicology, Trafficking, Prescribing, Prescribing, Side Effects, Substance Use Disorders, Therapeutic Drug Monitoring

...He is a Clinical Pharmacology & Toxicology specialist and provides medication therapy management consulting, serves as a principal investigator for Phase II and III clinical trials, and manages a national drug information service that provides clinical consulting support for medical practices, health systems, health plans, laboratories, and government agencies. Throughout his career, he has been an active member in numerous professional associations including elected leadership (American Medical Association, American Pharmacists Association, American Society of Health-System Pharmacists, American College of Clinical Pharmacology, American College of Clinical Pharmacy, American Society of Consultant Pharmacists, and numerous others). He is also a certified Drug Diversion Investigator (NADDI). Dr. Buffington’s practice also includes a forensic pharmacology division that supports medical examiners, law enforcement, courts, and attorneys....

Fire, Failure Analysis - Kitchen Fire Suppression Systems, Fire Sprinkler System Failure, CPVC sprinkler pipe failure, Fire Walls, Life Safety Egress, Fire Codes, Fire Hazard Analysis, Explosion Analysis and Cause, Fire Alarms, Walking Surface Slip Trip & Fall, Fire Origin and Cause Investigation, Fire Construction Defects

...Specialty areas of forensic expertise include kitchen fire suppression systems, fire sprinklers, and fire alarm systems. Fire and Building Code construction defect findings are supported by 45+ years of working with national codes and standards. Gregory Cahanin also performs code compliance and development for property owners and manufacturers. Working on staff at the National Fire Protection Association, Quincy, MA, Mr. Cahanin was a Senior Life Safety Engineer. Primary responsibilities were in support of Life Safety Code development and education. He was staff liaison for building construction standards and the Fire Prevention Code. Special project work included support of the International Division of NFPA in a survey of fire protection for all oil production facilities of LaGoven SA in Venezuela; an evaluation of the existing airport terminal in Rio De Janeiro, Brazil; and a code comparison study for the National Institute of Building Sciences....

Police Practices & Procedures - Use of Force, Police Procedures, Officer Involved Shootings, Arrest Procedures, Security, Premises Liability, Negligent Security

...He is also a certified instructional systems design instructor and has created or revised training for various law enforcement agencies. He received certification as a 21st Century Anti-Biased Policing Instructor through the Department of Justice. While with the USMS, Paul served as an Inspector with the Office of Professional Responsibility investigating employee misconduct. In this capacity, Paul was responsible for reviewing all use of force reports involving both USMS personnel and task force officers. Paul was the lead on numerous officer involved shooting cases as well. Paul is a certified Force Science Analyst having successfully completed the Force Science training and exam requirements. Paul also graduated from the Federal Law Enforcement Training Center's two-week Use of Force Instructor Training Program....

Construction Defects, Premises Liability - Architecture, Construction, Construction Defect, Fire Protection, Fire Suppression, Fire-Resistive Assemblies, Residential Construction, Commercial Construction, Building Codes, Premises Liability, Slip & Fall, Trip & Fall.

Registered architect with NCARB certificate in twenty states (licensed in more states than are listed in this directory), with an active design and forensic practice. As a forensic architect, his experience includes among other things, performing analysis of standard of care in building design and construction projects; performing analyses of building systems including roofing systems, window and door systems, exterior wall cladding systems, waterproofing and foundation systems, with a specialization in fire-resistive assemblies and active fire-protection systems. His experience includes premises liability investigation and analysis of accident sites relating to the built environment, both indoors and outdoors. As a design architect, his practice includes traditional architectural practice including building design, building code analysis & application, and services during construction....

Structural Engineering, Construction Defects - Building Inspection, construction, civil engineering, milestone inspections, structural integrity inspections, Building Enclosures, Exterior Walls and Cladding Systems, Waterproofing Systems, Roofing Systems, Water Intrusion Investigations

...Harvey-Lewis has more than 17 years of experience providing structural engineering design, construction administration, and forensic services to public and private-sector clients on various projects. As a forensic engineer, Scott investigates structural failures, building construction defects, and code compliance on behalf of attorneys, owners, developers, and insurance companies. Scott’s design portfolio includes significant phases of project development, from conceptual design and plan preparation through construction and final inspection. His expertise includes building envelope systems, cast-in-place concrete, steel, masonry, and timber design for commercial and residential structures, telecommunication and educational facilities, marinas, industrial plants, warehouses, storage and containment, and land development.

Construction Defects, Structural Engineering - Building Construction, Building Envelope, Building Forensics, Concrete, Construction, Construction Accident, Foundations Building, High-rise Building Construction Analysis, Hurricane Damage, Parking Decks, Personal Injury Building, Structural Steel, Construction Contract Administration

...Head has more than 40 years of structural engineering analysis, design and project/construction management experience throughout Saudi Arabia and the United States ranging from the design of new facilities, strengthening, renovation, retrofitting and repair of existing structures in the GMP, Design/Bid and Design/Bid/Build delivery method and conducting forensic investigations as an Expert Witness. He has been primarily engaged in the design and construction of building structures. During that time he has seen the good and the bad, what works and what doesn't and has seen the design and the construction processes change dramatically. Mr....

Traffic Engineering, Safety - Sight distance, traffic signs, traffic congestion, traffic signals, traffic control devices, construction zones, traffic safety, ADA, bicycle, pedestrian, traffic calming, neighborhood traffic management

• 36 years of experience in traffic/transportation engineering and safety • Vice Chair of the Institute of Transportation Engineers (ITE) International Traffic Engineering Council (determines standards, practices and handbooks for the industry) • Experience as a City and County Traffic Engineer, including review, design and construction management of pavement, sidewalk, ADA ramps, traffic signal, bike lane, striping and marking, sign, construction zone, neighborhood traffic management, traffic signal timing, and traffic calming projects • Speaker at international, national, regional and local conferences and seminars • Instructor for four Institute of Transportation Engineers (ITE) webinars and several in-person courses on traffic and safety engineering • Graduate of Leadership ITE / ITE Fellow • Excellent writer in both technical and laymen terms • Experience in providing testimony for Town Councils and Planning Boards • Licensed Professional Engineer in several states and a Certified...

Maritime, Accident Reconstruction - Boat repairs and reconstruction including Wood steel, Aluminum, Fiberglass, and composites. Accident investigation including work for USCG as well as Florida and Louisianna Marine Patrols, Electrical fires, sinkings. Collision repairs as well as investigation. Engine Damage

...Gasoline Engine Schools, MERCURY, MERCRUISER, VOLVO PENTA, YAMAHA, EVINRUDE, HONDA, SUZUKI, TOHATSU. (15) ABYC Electrical ABYC Electrical Systems. (16) ABYC Collision Investigation. (17) First Marine Claims Seminar. (18) Knox Claims Seminars2007, 2009, 2012, 2014. (19) ABYC Composites Course. (20) ABYC Electrical Corrosion Course. (21) ABYC Composites Course. (22) IBEX Composites Course. (23) IBEX Advanced Composites Course. (24) IBEX Surveying and repairing Advanced Composites. (25) IBEX Improving Gel Coat Quality. (26) IBEX Demystifying Propeller Design. (27) IBEX National Meetings 1996, 1998, 2000, 2002 ,2004, 2006, 2008, 2010, 2012, 2014, 2018 and 2019 (28) WORKBOAT National Seminars, 1997, 1999, 2001, 2003, 2005, 2007, 200

Architecture, Construction Defects - Architect & Engineer Negligence, Construction Defects, Fraudulent Change Orders, Construction License Agreement, Antitrust Complaint, Standard of Care Responsibility & Compliance, Warehouse Thermal Comfort, Bid Steering, Treachery & Self-Dealing Related to Professional Practice Industry Standards

...Expert Witness & Dispute Resolution 34 years Registered Architect 44 years Construction Executive 28 years Owner Representative 24 years Fred leverages his in-depth experience of leading cross-discipline teams of design & engineering professionals and construction management teams when presenting detailed opinions and support information in an understandable way. Fred’s work has included community boards, governing agencies, investors, General Services Administration - Offices of the Inspector General, FBI, multiple state courts (including Indiana, Illinois, California, Georgia, Florida, and New York), the New York County District Attorney’s Office (Labor Racketeering Unit, Construction Industry Strike Force), the New York City Office of Administrative Trials & Hearings, and the City of New York Police Department (District Attorney’s Office Squad)....

Security, Premises Liability - Hospital & Healthcare Security, Negligent Security, Workplace Violence, Crime Foreseeability, Mall-Retail-Store Security, Hotel & Hospitality Security, Apartment Buildings & Office Security, Parking Lots-Garage Security, Violent Crimes, Casino Security, Bars & Nightclubs and School Security.

...Marcisz has served as Executive Director of Security and Internal Security Consultant for one of the largest Healthcare Systems in the United States. Security Programs under Bill’s leadership have attained national recognition, including: a Top Ten Ranking in Security Magazine’s Annual "Security 500", recipient of the prestigious IAHSS Lindberg Bell Award, and the ASIS Outstanding Security Performance Award for Distinguished Security Program. Mr. Marcisz is among the few Security Professionals to have been recognized by his peers in the industry by being selected to receive the ASIS Outstanding Security Performance Award for Security Director....

Engineering, Mechanical Engineering - HVAC, MEP Design, Fire Protection, Life Safety, NFPA codes, UL standards, LEED, Plumbing Systems

Forensic Engineering and Law class lecturer, University of Miami, School of Civil, Architectural, and Environmental Engineering This course is designed to provide background and working knowledge of how forensic engineering projects are initiated and managed from engineer’s and attorney’s perspectives. Various elements required in a forensic investigation project from condition assessment to expert report preparation and expert testimony are covered. The role of the forensic engineering expert is explained from the view of the engineer and attorney.

Mechanical Engineering, Plumbing - HVAC,Outside Air Quality,Gas Cylinders/Tanks,Boilers - Steam/Water,Air Conditioning,LNG & Compressed Gases,Mechanical/Plumbing Codes,Walk-in Freezers,Ventilators,Gas Regulators,Plumbing Fixtures; Drains; ADA Showers,Pumps,Cooling Towers,Safety Relief Valves,Water Heaters,Exhaust Hoods (Restaurant)

I am a professional engineer with 45 years of experience in mechanical engineering, including designing, constructing, and maintaining various industries such as nuclear, defense, and healthcare facilities. I have experience renovating existing air conditioning systems, natural and liquid gas pipeline layouts, LNG and cryogenics build storages, medical gas installations, steam/condensate return, and chilled water pipelines. See www.pressmaneng.com for additional information. I provided Expert Witness services for TASA for 35 years....

Electrical Engineering, Construction Defects - Construction Defects of Electrical, Fire Alarm, Lighting, and Telecommunications Systems in Commercial and Residential buildings, including Condominiums, Laboratories, Museums, Office Towers, and University Campuses

...He has over 25 years of experience in engineering design and quality assurance inspections of electrical systems for construction projects in the US and abroad. These projects included commercial and residential structures, laboratories and higher educational facilities, museums and cultural facilities, and sports arenas. His technical knowledge and experience are predominantly focused on electrical, fire alarm, lighting, and telecommunication systems’ design in new and existing buildings. Nicholas has more recently provided Expert Witness testimony and construction litigation support.

Engineering, Construction - Management, Causal Analysis, Quality, Reliability, Safety, Design, Project Execution, Commissioning

...Louis practices in the intersection of quality processes, design requirements, and management controls. Using a combination of awareness of system methodologies, human motivations, causal examination; a root cause for operational accidents, or product failures can be established. Louis’ broad and diverse experiences enable him to relate disparate information to establish the sequence of decisions, conditions, and actions which precipitate incidents. Louis’ experiences range from significant Federal government energy, military, and civil programs, industrial manufacturing, industrial processing, and large commercial projects. He has significant experience in the establishment and operations of business alliances, design management, project execution and operational readiness. Much of his career has involved projects associated with hazardous, toxic and radioactive waste (HTRW) materials....

Automotive, Products Liability - wiring, electrical, fire, defect, design, failure, electronics, battery, motor, module, engineering, connector, instrument, cluster, speedometer, HVAC, charging, alternator, starter, validation, vehicle, automotive, forensic,

Providing Expert Witness and Failure Analysis services for design, manufacturing or assembly defects and preventable errors. Will uncover root cause(s) of product defects to identify culpable party. My credible and clear Expert Reports and depositions have been key in achieving successful out-of-court settlements for my fire subrogation clients. Expert in Failure Analysis and Forensic Engineering of automotive electrical fires and accidents caused by electrical, wiring or electronics due to defects, design flaws or assembly errors. M.I.T. BSEE (ME minor), UD Mercy (MIT curriculum) MS in Product Development and Systems Engineering, and UD Mercy EngD Doctoral coursework completed. Over forty years of automotive electronic and mechanical product design, development, manufacturing and field failure analysis experiences....

Architecture, Construction - Hospital Codes, Surgery Center, Nursing Home, Assisted Living, Errors & Omissions, ADA Accessibility, Standard of Care, Building Code, Building Inspection, Building Materials, Construction Defect, Delays, Water Intrusion, Inspection, Roofing, Skilled Nursing, EIFS, Stucco, Cladding, Breach of Duty

...CERTIFICATIONS Board Certified Architect licensed and actively practicing Led regional office of national firm to become ISO 9001 Quality Management System certified President: Willingham Architecture 1999-Present design, consulting and project management for medical professionals

Athletics & Recreation, Technology - Gymnastics, Cheerleading, Performance tumbling (theater, parade, dance, martial arts); standard of care, 3D modeling, litigation animation, Foam Pits, Trampoline, climbing walls, zip lines, attenuation devices,

...He was the Head Coach for the Savannah College of Art and Design Cheerleading team for competitions and games. Having performed as a gymnast, dancer, and cheerleader, CoachWayne continues to share his experience with new generations of students and instructors. ASTM: Committee F24 on Amusement Rides and Devices (trampolines, zip lines, climbing walls & adventure attractions) Committee F08 on Sports Equipment, Playing Surfaces, and Facilities Committee F45 on Robotics, Automation, and Autonomous Systems

Electrical Engineering, Electricity - Electrical Power Systems, Single /Three Phase Distribution Power Lines (Overhead & Underground), lightning mitigation, protective relays/ recclosers and fault current calculations .NESC, NEC, NFPA 780, IEEE RED and GOLD BOOKS

...Forty years of experience in design, operating and maintaining an electrical power system and components ( Pole line distribution and substations). Licensed Professional Electrical Engineer in: Alabama, Florida, Georgia and Tennessee. Experienced in lightning protection/mitigation, protective relaying, coordination, claims, power quality issues, fault current, voltage drop and motor start studies and analysis.

Mechanical Engineering, HVAC - HVAC, plumbing, construction defects, construction engineering, energy, failure analysis, engineering, refrigeration

...The firm performs building system design work, forensic analysis, expert witness consulting, product liability consulting, construction cost analysis and construction claims consulting. The staff is comprised of professional engineers and former construction executives. We are licensed engineers and licensed contractors and have performed consulting work in over 30 states. Our clients include contractors, homeowner associations, commercial building owners, tenants, hotels, casinos, design professionals, manufacturers, law firms, insurance companies and individuals. We know what it takes to design, bid and construct projects. IEI was founded in 1994 in San Diego, California. We have offices in San Diego; Clearwater Florida; and Richmond, Virginia and provide consulting and expert witness services nationwide. Each of our engineers are licensed as professional engineers in multiple states. These licenses cover approximately 30 states....

Construction Defects, Structural Engineering - Building Construction, Building Envelope, Building Forensics, Concrete, Construction, Construction Accident, Foundations Building, High-rise Building Construction Analysis, Hurricane Damage, Parking Decks, Personal Injury Building, Structural Steel, Construction Contract Administration

...Head has more than 40 years of structural engineering analysis, design and project/construction management experience throughout Saudi Arabia and the United States ranging from the design of new facilities, strengthening, renovation, retrofitting and repair of existing structures in the GMP, Design/Bid and Design/Bid/Build delivery method and conducting forensic investigations as an Expert Witness. He has been primarily engaged in the design and construction of building structures. During that time he has seen the good and the bad, what works and what doesn't and has seen the design and the construction processes change dramatically. Mr....

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

...Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii. Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/Trenching, Crush, Traffic Control, Multi-Employer, Cranes, Confined Space, Demolition, Directional Drilling, Electric, Equipment, Machine Guarding, Excavation, Paving, Power Tools, Rigging, Shoring. Successfully implemented numerous nationally and internationally accepted safety management systems involving multiple training programs, inspection tools and accident investigation methods. Founder and principal of Raising the Standard Consulting Inc....

Human Factors, Products Liability - Warnings, Labels, Reconstruction, Visibility, Failure Analysis, Forensic Engineering, Defects, Photogrammetry, Metallurgy, Human Factors, Ergonomics, Construction, OSHA, Safety Engineering, Product Liability, Equipment Failures, Industrial Accidents, Power Utility Accidents, Insurance Claims

Specific Cases: Go cart nip point fatality, washing machine amputation, amputations in punch presses, hydro-pneumatic tank explosion, agricultural truck amputation, airport conveyors, biscuit cutter, amusement rides, water-jet fatality, slips & trips, lead rope snap, exercise machine failures and injuries, document burn injuries, folding chair collapse, concrete anchor system, nail gun injury, prosthesis bolt failure, steam iron electrocution, pool light burn, design of warnings and instructions, ATV rollover, automotive failures and crash related phenomena, measurement of ECDs (TASER®) Farm equipment, failed engines, mining conveyors, power plant systems, belt conveyors, potato processing system, sewer line, tire shredder processing analysis, failed brake die, failed conveyor bearing, RV axle repair failure, trailer suspension system failure, trailer separation, dump truck telescoping cylinder failure, brake system, headlight filament analysis, service station gasoline tank leak, bicycle...

Safety, Ergonomics - Human Factors, Risk Assessment, Product Safety, Slips/Falls, Complex environments, Workplace Design, Procedures, Maintenance, inspection

...Two employees of a fish procession plant were repairing a conveyor system that was not properly locked out. The two employees entered a confined space called a fish dump with the knowledge of the supervisor. The employees contacted the actuator, and their legs were severely injured. I do not know the resolution to this case. 2022-Carpentar suing for his job back. I supplied information concerning the ergonomic issues that would preclude him from continuing to work. This was settled out of court. 2022-Snowblower product liability case. I am provided a report on the inherent safety issues with snow blowers. A dentist lost his right index finger clearing the chute. He confirmed the primary impeller was not moving when he stuck his hand in to clean the chute. This case was arbitrated to the benefit of the plaintiff. 2021- Lawnmower product liability case. In this case the lawnmower failed to stop when the operator released the bail and he attempted to pull the spark plug....

Software Engineering, Intellectual Property - Copyright, Copyright Infringement, Embedded Systems, Firmware, Patent Infringement, Patents, Printers, Software, Software Patents, Software Review, Source Code, Trade Secrets

Thought leader in the design and testing of software, firmware, and hardware. (Firmware is software that runs machines and devices.) Over 30 total years of professional engineering experience. This includes 15 years with Hewlett-Packard’s LaserJet printer design lab which, among other things, resulted in 12 US patents and 15 defensive articles. Author of the key textbook in hardware/firmware interface design, newsletters, and other articles. IEEE (Senior member), Phi Kappa Phi. Expert witness experience includes cases that have involved patents, copyrights violations, trade secrets, and other intellectual property as well as defective products. Work as an expert witness typically involves the examination of software source code and hardware designs, and reverse-engineering the designs of others. Has written expert reports and testified at deposition....

Electrical Engineering, Equipment & Machinery - Lighting, Street Lighting, Parking Area Lighting, Illumination, Accidents & Injuries due to Insufficient Lighting, Photometric Site Surveys, Light Fixtures, Electrocution, Electrical Injuries and Wrongful Death, Electrical Construction Injuries and Defects, Contract Disputes, Fire Origin & Cause.

...Since 1983, I have provided expert witness and forensic engineering services to insurance companies and attorneys including accident and failure investigations, determination of fire origin and cause, litigation support, expert opinions, reports, and testimony in cases involving industrial accidents, electrocution, personal injury, fire, street and area lighting, equipment and machinery failure, safety circuitry failure, grounding, SCADA, lightning damage and fire, construction defects, design and specification disputes, and construction contract claims. I have 40+ years of experience in the design, specification, construction contract administration, installation, startup, and troubleshooting of electrical power, lighting, on-site generation, distribution, control and instrumentation systems, and equipment for residential, commercial, industrial, and municipal occupancies; water, wastewater, and stormwater treatment plants; and military sites....

Chemistry & Chemicals, Metallurgy - Product Failures, Accidents, Analytics, Materials, Chemical, Chemical Processes, Friction, Wear, Coatings, Corrosion, Composites, Ceramics, Carbon Monoxide Detectors; Product Design, Aviation, Buildings Materials, Adhesives, Roadway Materials, R&D, Expert Witness

...• An expert in materials science, advanced composite materials, materials processing including process sensors and controls, materials compatibility, materials selection, protective coatings and lubricants, decorative coatings, coatings fabrication, semiconductor materials, gas sensors, tribology (the science of friction and wear), materials property modeling, corrosion, statistics, and experimental design. • A uniquely qualified litigation expert witness whose extensive scientific experience coupled with broad experience with product and process design processes, the conduct of research and development, and innovation management, provides comprehensive insight of both the technical issues and their relation to R&D and design issues; specialization throughout his career on the role that materials contribute to the limitations and failures of products and systems. • Formal training in chemistry, physics, thermodynamics, and materials.

Firearms & Ballistics, Safety - Firearms, shooting ranges, gun store systemic safety management systems, Firearm human factors, Gun safety, Shooting range safety, Personal protection, Concealed carry, Shooting range design, Training program design, Firearm training, Shooting club management

President (8 yrs) of the 2500 member, 300 acre Aurora Sportsmens' Club - Did a total turn-around from brink of bankruptcy to one of the top shooting clubs in the country; President/Chief Instructor SAFER USA - trained over 8,000 students; U.S. Army (3 yrs) Vietnam veteran - 1st Infantry Division Medical Corps; Sworn, armed Auxiliary Sheriff's Deputy (20 yrs) Sergeant & Executive Board; NRA Training Counselor certified to teach and to train instructors to teach: Basic Pistol, Shotgun and Rifle; Home Firearm Safety; Personal Protection in the Home; Personal Protection Outside the Home; and Metallic Cartridge & Shotgun Shell Reloading; NRA Range Development & Operations certified; NRA Chief Range Safety Officer; NRA Certified Law Enforcement Instructor; NRA Regional Refuse To Be A Victim Counselor; NRA Distinguished Expert Handgun; Chicago Firearm Certification Instructor (entire duration of the program); Illinois Hunter Safety Master Instructor (5 years) ; State of Illinois Certified...

Meteorology - Past weather reconstruction, all weather related accidents, certified weather records and reports, weather graphics, expert testimony, slip and fall.

...In addition to his administrative responsibilities as President, Tom earned the American Meteorological Society (AMS) Certified Consulting Meteorologist (CCM) designation, earning CCM # 661 in 2010. He provides expert testimony and reports for a variety of legal cases. Tom is also the CIO of the company handling all aspects of information technology, computer systems and applications. Tom spent four years as a Weather Officer in the U.S. Air Force in the early 1970s. Tom received a Bachelor of Science degree in Aviation Meteorology from Park College of Aviation at St. Louis University.

Health Informatics, HIPAA - Electronic Health Information Systems, (CPHIMS) Medical Records, Healthcare EDiscovery, (CEDS) Information Governance, Electronic Health Records, Health Insurance, Healthcare Compliance, Clinical Documentation, CEDS, RHIA, Quality Improvement (CPHQ)

...Kim has been an active member of the Health Level Seven (HL-7) Working Group responsible for review and development of the Records Management and Evidentiary Support (RM-ES) profile for the design and development of the functional profile for Electronic Health Record (EHR) systems since 2006. She has also been an active member and contributor in AHIMA task forces and working groups related to electronic discovery. Kim holds a Master’s of Business (MBA) from the Lake Forest Graduate School of Management, a Master’s of Jurisprudence (MJ) in Health Law and Policy from the Loyola School of Law - Beazley Institute for Health Law and Policy in Chicago, IL and Post Baccalaureate in Clinical Informatics (PBCI) from the Johns Hopkins School of Medicine. She is a 2011 recipient of the AHIMA e-HIM® Triumph Award in recognition of those individuals, groups, or organizations who have made important advances in areas related to e-HIM®....

Medical Devices, Biomedical Engineering - FDA, Medical Devices, FDA Compliance, FDA law, FDA Inspections, FDA medical device regulation, FDA medical device labeling, FDA regulation of clinical trials, FDA approval of medical devices. Medical Device Recalls, Medical Device Complaints, FDA Inspections

...Personally designed quality systems, prepared regulatory submissions (510(k), IDE and PMA) and managed 7 multi-center clinical trials for class 3 medical devices. From 1989-1993, was the Industry Representative on the FDA Circulatory Systems panel which reviewed over 30 PMA clinical studies for cardiovascular device. Serve as an expert witness for cases involving FDA regulation compliance for medical devices. Regularly perform webinars regarding FDA and issues regarding clinical studies and medical devices. Finally, a seasoned educator/speaker with over 150 public presentations to audiences ranging from senior executives, physicians, technical personnel, other medical personnel, major media, and the general public. Engaged as an Expert Witness in over 40 cases. deposed 10 times and testified in court twice.

Fire, Safety - Fire Protection Engineering, Arson, Smoke Detectors, Fire Alarm, Fire System Failure, Fire Detectors, Carbon Monoxide, Fire Cause and Origin, Fire Resistance, Building and Fire Code, Explosion, Fire Safety, Means of Egress, Life Safety, Fire Sprinklers, Forensic Fire Analysis, Fire Sprinkler Leakage

...His roles have included Insurance Risk Analyst, Building Commissioner, Building Inspector, Fire Protection and Building Code Consultant, Fire Protection System Designer, System Failure Analyst, and Forensic Fire Investigator. Mr. Wheeler's Expert Witness work includes analysis of events, written reports if requested, litigation support, mediation and arbitration support, depositions, and trail testimony. Mr. Wheeler's career experience includes approximately 220 cases, 65 depositions, and 32 trial testimony's. Mr. Wheeler works nationally and worldwide.

Software Engineering, Computers - Cybersecurity, Software Architecture, Artificial Intelligence, Cryptocurrency / Blockchain, Speech & Face Recognition, ESI Protocol, Social Media Forensics, Biometric Identifiers, Code Review, Patent Infringement ,Trade Secret, IPR, PTAB, Claim Analysis, Forensic Data Extraction, BIPA

...- In addition to his blockchain development experience, he designed the first cryptocurrency arbitrage system....

Blasting and Explosives, Mining - Construction, Mining, Blasting, Explosives, Drilling,

...SPECIALIZED EXPERIENCE: Rotary-percussion track drill operation; Electric / non-electric detonation systems and sequential blasting techniques; Blasting plan preparation and implementation; Blast design optimization and peak particle velocity prediction; Post blast particle velocity and air- over-pressure analysis; Blasting claim investigation and mediation. LITIGATIVE SUPPORT EXPERIENCE: Expert witness litigation support and testimony involving subrogation actions, binding arbitration, blasting damage (due to transient vibration and flyrock), bodily injury and fatalities. Blasting Claims & Litigative support services have been provided for cases in the following States: • Alabama • Florida • Georgia • Idaho • Indiana • Iowa • Kentucky • New York • Pennsylvania • Rhode Island • Tennessee • Vermont • Washington • West Virginia

Architecture, Construction Defects - Architect & Engineer Negligence, Construction Defects, Fraudulent Change Orders, Construction License Agreement, Antitrust Complaint, Standard of Care Responsibility & Compliance, Warehouse Thermal Comfort, Bid Steering, Treachery & Self-Dealing Related to Professional Practice Industry Standards

...Expert Witness & Dispute Resolution 34 years Registered Architect 44 years Construction Executive 28 years Owner Representative 24 years Fred leverages his in-depth experience of leading cross-discipline teams of design & engineering professionals and construction management teams when presenting detailed opinions and support information in an understandable way. Fred’s work has included community boards, governing agencies, investors, General Services Administration - Offices of the Inspector General, FBI, multiple state courts (including Indiana, Illinois, California, Georgia, Florida, and New York), the New York County District Attorney’s Office (Labor Racketeering Unit, Construction Industry Strike Force), the New York City Office of Administrative Trials & Hearings, and the City of New York Police Department (District Attorney’s Office Squad)....

Biomechanics, Medical Devices - Occupant Motion, Injury Biomechanics, Orthopedics, Medical Product Liability, Duties of Manufacturer, Design, Testing, Manufacturing, Warnings, Instructions for Use, Injury Event Reconstruction, Failure Analysis, Injury Pattern, Soft Tissue Injury, Low Speed Collisions, Falls, Impacts, Sports

Licensed Professional Engineer Medical Device Design & Development  38+ years orthopaedic device development  12 patents Testified in State and Federal Courts , Injury Biomechanics and Medical Device Litigation  20+ trials  100+ depositions 38 years of experience in the biomechanics and orthopedics fields, 16 years forensic case analyses. I routinely deal with forces that are applied to the human body during many activities, including impact and injury scenarios. To assure the safety and efficacy of new medical devices, we define clinically relevant performance requirements for their installation and use, and then test to define the product specific performance characteristics. The physical principles and methods used in orthopedic biomechanics are the same as those used to reconstruct injury events....

Aviation & Aerospace, Engineering - Aerospace, Aviation, Engineering, Aircraft Design, Aerodynamics, Structures, Smart Structures, Stability and Control, Propulsion, UAV, UAM and UAS, Drone, Missile, Munition, Helicopter, Electric Flight, Flying Toys, Flight Testing, Aircraft Crashworthiness, Cost Analysis, Patents

I am a Full Professor of Aerospace Engineering at the University of Kansas (KU) and Director of the Aircraft Design Laboratory (ADL). When not working for the university, I run a small business, Barrett Aerospace Technologies, which is typically centered on transitioning KU technologies to the commercial world. • Winner of the Discover Magazine Award for Aerospace and Aviation • Led more award winning American Institute of Aeronautics and Astronautics (AIAA) Aircraft and Missile Design teams than any other in the world • Associate Fellow, AIAA • Listed by Stanford/Elsevier as one of the world’s top 2% most cited Technologists • Most cited member of the AIAA Aircraft Design Technical Committee • Published more than 400 professional works • Holder of 20 patents • Worked on projects for all of the branches of the US DoD, NASA, NSF, DARPA, all major US aerospace corporations and many minor....

Structural Engineering, Construction Defects - Codes, Concrete Failures, Steel Failures, Masonry Failures, Wood Failures, Corrosion, Seismic Design, Wind Design, Partial/Full Collapse, Prestressed Concrete, Post-tensioned Concrete, Facade performance, Cladding Failures, Vibration, Timber Construction, Timber Decay, Wood Decay, Tall Buildings

...I have designed concrete, steel, masonry and wood structures, generally commercial, government or schools. About half of my work has been design of building facades or cladding systems. Seeking new challenges, I joined the faculty at the University of Kansas in 2016, where I am allowed to continue consulting. As a Professor of Practice and Director of the Master of Civil Engineering (MCE) Program at The University of Kansas, I teach primarily graduate structural engineering courses....

Engineering, Construction - Mechanical engineering, Electrical engineering, Control systems engineering, Forensic engineering, Certified indoor environmentalist, Design errors and omissions, Construction defects, HVAC systems, HVAC control systems, Hydronic systems, Moisture intrusion, Mold growth

...Flettrich has fifty-six years experience in (1) the design and retrofit of energy efficient mechanical, electrical, and control (MEC) systems for both new and existing residential, commercial, industrial and institutional facilities with particular emphasis on HVAC, refrigeration, hydronics, controls, energy conservation, and energy management systems (2) problem solving and (3) cause and origin investigations related to poorly performing or problematic building systems. He is a licensed PE in mechanical, electrical and control systems engineering in Alabama, Florida, Louisiana, Mississippi and Texas. The combination of his multi-disciplined expertise and his extensive background in design and construction uniquely qualifies him as a forensic expert who is capable of performing comprehensive investigations and eliminates, in many instances, the need to retain multiple engineering experts on cases requiring a multi-disciplined investigation.

Accounting, Bankruptcy - Fraud, Lost Profits, Forensic Accounting, Business Valuation, Business Damages, Damages, Shareholder Disputes, Corporate Veil Piercing, Business Interruptions, Breach of Fiduciary Duty, White Collar Crimes, Fiduciary Duty

...the US for leading national law firms and Fortune 100/500 companies in areas including, calculating lost profits, fraud detection and recovery, mismanagement, bankruptcies, appointment of receiver, business valuations, shareholder disputes, evidence of ownership, identification of hidden assets, corporate veil piercing, business interruptions, single business enterprises, analysis and explanation of complex financial transactions, forensic accounting, accounting malpractice, marital dissolutions, including separate and community property, spousal support and tracing, lost earnings, personal injury, intellectual property and reasonable royalties, including patent, trademark and copyright infringement and trade secrets, investigative accounting, breach of contract, breach of fiduciary duty, white collar crime, real estate, securities, product liability, business dissolution, construction defects, delays and cost overruns, wrongful termination, data analytics, advanced automated graphic design...

Engineering, Environmental - Building Mechanical Systems, HVAC Systems Design, HVAC Systems Installation, HVAC Systems Controls, Plumbing Systems Design and Installation, Building Fire Protection systems, Indoor Air Quality, Indoor Environmental Quality, Mechanical Codes , Plumbing Codes, National Fire Protection Codes

Consulting engineer in private practice since 1973 and owner of Ritter Consulting Engineers Ltd. since 1981. Registered to practice in Louisiana, Alabama, Arkansas, Florida, Georgia, Mississippi, Missouri, North Carolina, South Carolina, Oklahoma, Texas and Virginia. Deposed and testified in both Federal and State courts. Member of the following professional organizations: ASHRAE AIHA LES NSPE NFPA AIA AEE IBC code IMC code IPC code

Construction Defects, Construction - Slate Roofing, Copper Roofing, Steeple Inspection, Tower Inspection, Roof Design, Historic Restoration, Building Envelope, Waterproofing, Cedar Roofing, Tile Roofing, Single-Ply Membrane, Roofing Specification, metal roofing, masonry, walls, windows, below-grade, waterproofing, construction defects

As Principal of Fulmer Associates LLC, Robert Fulmer utilizes his 38 years of professional practice and consulting experience within the building enclosure construction industry, to provide building exterior design, assessment and project management services for institutional, academic and residential structures through the application of contemporary building science and current industry standards. Robert’s professional experience includes all building enclosure systems, including all types of low-slope and steep-slope roof systems, with extensive expertise in slate, copper, tile and wood roof systems. Also, included are all types of masonry wall and window systems, stucco, plaza decks and below-grade waterproofing. He is a published author and has lectured throughout the U.S. on various exterior building science topics....

Electrical Engineering, Mechanical Engineering - electrical engineer, mechanical engineer, power plant, nuclear, gas, oil, coal, marine, design, commissioning

SUMMARY Electrical Power Plant Consulting Engineer and Project Manager experienced in • Switchgear, protection and control systems design, installation, startup, 
commissioning, performance testing and troubleshooting for • cogeneration, hydroelectric, geothermal, combustion turbine, steam 
turbine, diesel, gasoline and gas fired reciprocating engines and nuclear 
power plants and related equipment and systems for • power plant owners, facility owners, utilities, U. S. Navy, U. S. Air Force, 
US Coast Guard, MSC, environmental engineers, power system component manufacturers and switchgear & control systems manufacturers • Forensic expert witness and consultancy related to electrical engineering in electric power systems. 
 EDUCATION & CREDENTIALS • MBA, Colgate Darden Graduate School of Business Administration, University of Virginia, Charlottesville, VA 1983-1985....

Software Engineering, Electrical Engineering - embedded systems, operating systems, computer software, automotive electronics, medical devices, industrial automation, computer security, software malfunction, programming languages, reverse engineering, source code review, software quality

Michael Barr is a former adjunct professor of computer engineering with more than twenty-five years of experience in the software industry, including over a decade spent developing software for embedded systems. Software he wrote has powered millions of products. Mr. Barr is the author of three books and more than seventy articles and papers about embedded software design and architecture and is internationally recognized as an expert in the field. He is also a founder of three companies, including Barr Group. In his work as a software expert witness, Mr. Barr has testified more than twenty times before judges and juries in matters ranging from patent infringement and validity to product liability to theft of copyrighted software and trade secrets. He has been qualified in U.S. and Canadian courts as an expert in computer software, electrical engineering, and satellite TV security and piracy.

Electricity, Safety - workplace electrical safety, arc flash, electrical safety management, electrical codes & standards, NFPA70E, National Electrical Code, electrical injury, electrocution, electrical reliability, electrical maintenance, electrical construction, occupational electrical safety, OSHA, NESC, electric shock

...My responsibilities included improving management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance in all DuPont operations. I have published more than 90 peer-reviewed papers and magazine articles on occupational electrical safety. I have received awards from leading institutions recognizing my work to advance the practice of electrical safety. I am an adjunct faculty member in the graduate school of Advanced Safety Engineering and Management (ASEM) at the University of Alabama at Birmingham (UAB). At UAB, I teach Prevention through Design, Engineering Ethics, and Electrical Systems Safety which I developed for the ASEM curriculum....

Electrical Engineering, Mechanical Engineering - electrical engineering, mechanical engineering, power plant, nuclear, gas turbine, generator, engineering, relays, design, contractor, commissioning, marine, Electrical Power, Utility, Power, Electrical Generation, Generation

...Haaland has thirty four years experience in power production, design, construction, and commissioning, with 27 years managing people and projects. He is a registered professional engineer in Maryland and held a Senior Reactor Operator’s license at Indian Point #3 Nuclear Power Plant. Experience is in conventional, nuclear, and alternate fuel power plant mechanical and electrical systems management, design, construction, plant outage management, start-up, performance testing, and operation. He has performed as Project Manager, Construction Manager, and Commissioning Manager for several Greenfield power projects. He has successfully engineered, estimated, planned, executed work, and provided troubleshooting services for power plants of varied prime movers. His has been instrumental in meeting contractual and schedule requirements....

Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation

...Kiddy's work experience includes the oil and gas industry, aircraft and helicopter design, marine structures, wind turbines, and telecommunications. From a technical perspective, Dr. Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr. Kiddy is a registered professional engineer in five states, a certified fire and explosion investigator, and an FAA certified drone pilot. Dr. Kiddy's also has substantial experience in intellectual property matters ranging from invention disclosures, patent writing, patent prosecution, and continuing through IP disputes. Dr....

Massage - Massage Therapy, Sexual Abuse in a Spa Setting, Inappropriate Touch, Inappropriate Conduct, Massage Abuse, Sexual Assault, Sexual Misconduct, Inappropriate Touch, Inappropriate Draping, Poor Draping, Draping Issues

...Benjamin has designed and led courses in the massage and bodywork field. In addition to teaching his own therapeutic techniques, he has taught extensively throughout the country and also appeared as a panelist on issues related to communication, ethics, boundaries, and working with survivors of trauma. As Founder and President of the Muscular Therapy Institute, Dr. Benjamin made MTI one of the only schools in the United States to incorporate more than 100 mandatory hours of coursework on these topics. In addition, Dr. Benjamin conceived of and co-authored The Ethics of Touch, a book on ethics, sexual trauma, and professional boundaries, that is used as a primary text in massage and bodywork schools throughout the United States and Canada. He has also published multiple articles on sexual abuse in healthcare. Injuries Dr. Benjamin has a Ph.D. in Sports Medicine and has taught courses on the assessment and treatment of musculoskeletal pain and injuries for more than 30 years....

HVAC, Plumbing - Mechanical, HVAC, Heating, Plumbing, Building Systems, Freeze Losses, Pipe Failures, Water Heating, Appliance Failures, Water Leaks, Combustion Equipment, Building Assessments, Damage Assessments, Cost Estimates, Energy, Ventilation, Air Conditioning and Cooling, Process Systems, Product Liability

...Provided Forensic Engineering Services on hundreds of cases with a specific focus in the areas of Building Systems and Equipment, Heating Ventilation and Air Conditioning (HVAC), Failure Analysis of Mechanical Systems and Components, Failure Modes & Effects Analysis, Energy Systems, Industrial Process Systems. Substantial experience in the Design and Manufacturing of Mechanical Systems and Components. Design and Operation of Energy Systems and Power Plants, including Nuclear, Fossil and Renewable Energy. Also provide services in the areas of Project Management and Construction Administration for the entire duration of a project or on an interim basis, or for the purposes of Claim Damage Mitigation. Detailed knowledge of Construction Management Processes and Organizational Structure. U.S. Patent: 7,631,820 B2 Experienced Arbitrator for FINRA and Massachusetts Office of Consumer Affairs and Business Regulation.

Mechanical Engineering, Hotel & Restaurant - combustion, foodservice equipment, heat transfer, home appliances, reliability, residential heating, water heating, food preparation, manufacturing, restaurant equipment, appliances, food service equipment, intellectual property, cooking, cooking equipment, cooking appliances

Experienced mechanical engineer with over 48 years of experience in product design and manufacturing for commercial foodservice equipment, combustion equipment, heating and cooling and energy applications. Trained to the black belt level in lean six sigma. Expert witness services include patent infringement, product liability,and personal injury cases. I have provided services to attorneys for both the defense and plaintiff in a variety of cases. My experience and capabilities provide litigation support in the commercial appliance industry, restaurants and foodservice, residential appliances, residential heating and cooling equipment, combustion equipment and similar industries. My training in mechanical engineering and my experience with manufacturing commercial products provides the background for my expertise in thermodynamics and heat transfer, combustion and burner systems, electrical heating equipment, and similar products....

Mechanical Engineering, HVAC - Appliance malfunctions, Building assessments, Carbon-monoxide incidents, Electrical equipment failures, Fire sprinkler system malfunctions, Forklift/machine accident evaluations, HVAC, HVAC design, Industrial accidents, Pipe failures, Solar panel failures, Wind/flood damage, Winter Freeze-ups.

...Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. PROFESSIONAL LICENSURE: ~ Registered Professional Engineer: AZ, CA, CO, CT, FL, HI, IL, MA, MD, ME, MI, MN, NC, NH, NJ, NY, NV, OH, PA, RI, VA, VT, & WI ~ Certified Energy Manager (CEM) as endorsed by the Association of Energy Engineers ~ Certified Energy Auditor (CEA) as endorsed by the Association of Energy Engineers ~ LEED Accredited Professional as endorsed by the U. S....

Construction Defects, Construction - Slate Roofing, Copper Roofing, Steeple Inspection, Tower Inspection, Roof Design, Historic Restoration, Building Envelope, Waterproofing, Cedar Roofing, Tile Roofing, Single-Ply Membrane, Roofing Specification, metal roofing, masonry, walls, windows, below-grade, waterproofing, construction defects

As Principal of Fulmer Associates LLC, Robert Fulmer utilizes his 38 years of professional practice and consulting experience within the building enclosure construction industry, to provide building exterior design, assessment and project management services for institutional, academic and residential structures through the application of contemporary building science and current industry standards. Robert’s professional experience includes all building enclosure systems, including all types of low-slope and steep-slope roof systems, with extensive expertise in slate, copper, tile and wood roof systems. Also, included are all types of masonry wall and window systems, stucco, plaza decks and below-grade waterproofing. He is a published author and has lectured throughout the U.S. on various exterior building science topics....

Pediatrics, Hospitalist - Pediatric Hospital Medicine, Pediatric Urgent Care, Sleep Apnea, Complex Care Pediatrics, Pediatric Intermediate Care, Asthma, CPAP, BiPAP, Procedural Sedation, Hypoxemia, Feeding Disorders, Congenital Syndromes, Metabolic Disorders, Diabetic Ketoacidosis, Sepsis, Pediatric Overdoses, Transport

...Her communication skills have drawn institution recognition, such that she now spearheads a system-wide program for patient handoff safety and quality. Dr. Hillier has also won awards for her ability to give skilled feedback to developing medical providers, designating her as a leader in psychological safety and professional development.

Anesthesiology - Anesthesiology, Endoscopy, Procedural sedation, Physiology, Biomedical engineering, Airway management, Ambulatory anesthesia, Preoperative assessment, General anesthesia, Anesthesia information management systems (Epic)

...I completed a PhD focused on designing respiratory equipment based on innovative physiological principles. I have been awarded 7 patents and have published 20 papers in the field. I have also developed an expertise in medical IT and electronic medical information systems, including Epic. I have practiced in diverse clinical environments, including academic, private and community. My areas include general surgeries, neurosurgery, orthopedics, urology, gynecology, ambulatory, plastics, gastrointestinal, endoscopy, interventional radiology and other procedural sedations.

Chemical Engineering, Failure Analysis - polymer, plastic, rubber, coating, materials, material science, material engineering, thermoplastic, thermoset, composite, design, manufacturing, adhesive, ink, automotive, medical device, aerospace, packaging, accident, defect

...He has extensive experience with manufacturing, product development, product design, and failure analysis. Systems investigated include plastics, composites, coatings, paints, adhesives, rubbers, fibers, suspensions, emulsions, and pastes. In particular, Dr. Scott has published extensively on the topics of polymer processing and structure relationships, compounding and mixing in multiphase polymer systems, and structure and morphology development during polymer processing. He is the inventor on 11 U.S. patents, author of more than 30 articles in peer reviewed journals, author of 40 conference proceedings, and has presented more than 50 seminars to industry and government organizations. Dr. Scott has conducted failure analysis investigations and developed product designs in a broad range of applications, including: automotive components, consumer products, medical devices, aerospace, pharmaceuticals, coatings, prints, construction materials, and packaging....

Software Engineering, Computers - Cybersecurity, Software Architecture, Artificial Intelligence, Cryptocurrency / Blockchain, Speech & Face Recognition, ESI Protocol, Social Media Forensics, Biometric Identifiers, Code Review, Patent Infringement ,Trade Secret, IPR, PTAB, Claim Analysis, Forensic Data Extraction, BIPA

...- In addition to his blockchain development experience, he designed the first cryptocurrency arbitrage system....

Engineering, Transportation - Traffic Engineering, Traffic control, Road Safety, Roadway Design, Traffic Impacts, Intelligent Transportation Systems, Traffic Incident Management

...His 44 years of professional experience include projects in both rural and urban settings: municipal traffic engineering, transportation planning, highway design, traffic system operations, right-of-way acquisition, and Intelligent Transportation Systems. In addition to his extensive project work, he has court testimony experience. Mr. Beaubien is a registered professional engineer in several jurisdictions. He has been certified as a Professional Traffic Operations Engineer (PTOE) by the Transportation Professional Certification Board, Washington, D.C. He is also certified as a Road Safety Professional (RSP). He currently chairs the Metro Detroit Incident Management Coordinating Committee, is a Past-President of the Intelligent Transportation Society of Michigan, and is a past International President of the Institute of Transportation Engineers. As frequent public speaker on traffic safety topics, Mr....

Safety, Agriculture Engineering - Accidents, Auto ADAS, Agriculture, Battery Fires, Cannabis Processing, Chemical Exposure, Child Safety, Construction, Electrocution, Ergonomics, Fitness Equip, Fires/Explosions, HazCom, Human Factors, HVAC, Mechatronics/Nano, Medical Devices, OSHA, Recalls, RV/ATV, Slip/Fall, Vapes, Warnings/Label

...Miller Engineering’s principle engineers wrote the original books on warnings and instructions, have published in several other areas, have participated in product designs and patents, and have analyzed, reconstructed and/or animated numerous types of accidents. Miller Engineering also designs and operates hydroelectric and solar energy sources within their agricultural, forestry, marine, and cattle subsidiary operations in Idaho and Oregon, lending to unique hand-on expertise in these areas. We are known for our staff’s thorough, detailed documentation and portrayal of accident sequences and the surrounding environmental circumstances. Dr. James Miller, PE—Founder of Miller Engineering and Emeritus Professor at the University of Michigan – Engineering. He has directly served in Washington originating several Federal OSHA safety regulations, and interacts regularly with Consumer Products Safety Commission regarding safety and product recalls....

Cannabis, Laboratories & Testing - Laboratory, Cannabis, Marijuana, Compliance, Regulatory, Cannabinoid, THC, Potency, Contaminant, Quality Management System, Audit, ISO 17025, FDA, Clinical, DNA, Molecular, Genetic, Testing

...Dr.Opie has written a variety of articles around laboratory operations including: Cannabis Laboratory Planning, Design, Licensing, Instrumentation, and Staffing, A Hemp Growers Guide to Compliance Testing for THC and CBD Levels, A Guide to Preparing Cannabis Laboratory Business License Applications, and How to Start a Cannabis Testing Lab: A Step-by-Step Guide. Dr. Opie is a quality management system lead assessor for laboratories pursuing ISO/IEC 17025:2015 accreditation.

Athletics & Recreation, Risk Management - zipline, zip lines, zipline accident, zipline braking, zipline brake system, zipline construction, zipline death, zipline safety, residential/backyard zipline, zipline standards, aerial adventure course, aerial adventure course standards, ropes course, challenge course, climbing, ACCT, ASTM, NAARSO

...Smith is an industry leader and proven business, marketing, and risk management consultant with 25 years of experience designing and developing award-winning aerial adventure parks and 29 years of experience delivering adventure-based tours, adventure programs, and team and leadership development programming. He has worked with numerous Fortune 500 companies as a business consultant, authored and published climbing guides, worked as a Field Instructor for the Outward Bound School, and is regularly retained as a zip line and adventure park expert witness. Smith maintains a niche consultancy, AdventureSmith, Inc., focused on risk management, marketing, business consulting, and staff development systems for the aerial adventure course market. AdventureSmith, Inc. has provided support to many challenge courses, zip lines, and aerial adventure parks in the U.S.A. and Canada....

Critical Care Medicine, Hospitalist - Sepsis, Resuscitation, Cardiac Arrest, ACLS, Ventilator Management, ARDS, Acute Respiratory Failure, Respiratory Arrest, Overdose, Toxic Ingestion, Coma, Brain Death, Volume Status, Cardiogenic Shock, Multiple Organ System Failure, Alcohol Withdrawal, Alcohol Withdrawal Delirium, ICU Management

...As a student I earned honors designation in multiple rotations and Alpha Omega Alpha designation. As a resident I was repeatedly identified by my peers as a top resident in teaching and clinical skill. I am Board Certified in both critical care medicine and internal medicine by the ABIM. I formerly worked as an intensivist for 9 years in a community hospital that is part of the largest hospital network in Minnesota, and currently work as a hospitalist for a medium sized community hospital. Further, I've led sepsis and resuscitation committees achieving award-winning patient outcome results within the state and nationally, both at my local hospital and within the larger network. Under my leadership as Medical Director, we implemented evidence-based best practices in multiple areas that led to system-best ventilator and ICU LOS times. I have also been a member of multiple peer-review committees and conducted hundreds of case reviews, leading their presentation and discussion.

Motorcycle, Failure Analysis - Accident Reconstruction, All Terrain Vehicle, UTV, Side by Side, Electrical Engineer, Throttle Design, Dealership, Snowmobile, Power Steering, Consultant, Fire, Electronics, Accessory, Rollover, Polaris, Ranger, Speed Sensor, Root Cause Analysis, Trade Practices, Patent, Arctic Cat, Trademark, ATV

30+ years with an exceptionally broad and deep range of experience with ATVs, UTVs, Side-by-Sides, snowmobiles and motorcycles including: Off-road vehicle product failure and root cause analysis, accident reconstruction, product design, dealership vs OEM vs consumer liability, competitive analysis, intellectual property development, vehicle diagnostics, market research in vehicles, components, technology and accessories for global brands and startups. 11 years of employment at Polaris working on the Ranger UTV and Sportsman ATV platforms. A founding contributor to the Polaris Development Process. One of the original inventors of the Ride Command and Active Descent Control systems as well as making contributions to electronics at Yamaha, BRP and Arctic Cat. Consulting and Expert Witness defense clients have included Mahindra, Robert Bosch Corp, Textron, Arctic Cat, General Dynamics, Johnson Controls and Yamaha. Plaintiff experience in many rollover and fire cases....

Chemical Engineering, Intellectual Property - polymers, plastics, patent infringement, adhesives and films, security documents, micro-optics, extrusion, injection molding, product development, failure analysis, laminates, polymer coatings

...Thomas School of Engineering where he has taught since 2009, including courses on materials , polymers in design, senior design, fluid mechanics laboratory, and thin films. He also teaches on materials at the University of Minnesota. More than 25 years of industry experience at 3M and Gemalto/Thames during which he generated, supported, and defended numerous patent filings and developed products that have achieved over $250MM in sales. A member of the American Institute of Chemical Engineers (AIChE), the Northwestern University Chemical and Biological Engineering Advisory Board, and the Document Security Alliance. Dr. Haas has 18 patents. Focus areas include: - New product and technology development - R&D strategy - Polymer extrusion and coating - Polymer and adhesives systems and properties - Security document features, printing, and fabrication - Adhesives and tapes - Defect analysis / failure analysis Dr....

Information Technology, Telecommunications - Cloud Computing, Computer, Construction Claims, Contracts, Data Center, Engineering, Fiber Optic, Forensic Engineering, Internet, Intellectual Property, Life Safety, Network, Operations, Outsourcing, Project Management, Service Level Agreement, Systems Implementation, Telecom, Trade Secret

Professional Engineer, Certified Data Center Design Consultant & Registered Communications Distribution Designer with 20+ years as a design & operations consultant & training provider with a focus in the data center, telecommunications & networking industries. International expertise in 28 countries across 6 continents, encompassing data center facilities, power, cooling, networking infrastructure, fiber optic & copper network cabling, IT & Telecom systems and services, implementing enterprise, colocation & cloud service strategies. Publications & Awards ♦ANSI/BICSI 002, Data Center Design & Implementation Best Practices Standard, Author/Editor ♦ANSI/BICSI 009, Data Center Operations Standard, Chair/Author/Editor ♦Data Center Handbook, Wiley Publishing One of 50 Subject Matter Experts from around the world that authored the content, providing the fundamentals, technologies, and best practices in designing, constructing & managing mission critical, energy efficient data centers....

Hydrology, Civil Engineering - flood, erosion, dam, river, stream, restoration, hydraulics, streambank, habitat, water quality, levee, channel, riprap, vegetation, sediment, sedimentation, bridge, grade control, storm, stormwater

...Shields’ research focused on the response of fluvial systems to human influences and development of environmental design criteria for all types of channel stabilization and modification projects, including streambank erosion controls and management of riverine backwaters. He is a leading authority on stream and river restoration, was a founding member of the ASCE Task Committee on River Restoration, a past chair of the River Restoration committee, and a past chair of the hydraulics and waterways council of the ASCE/EWRI. He has served as an instructor for short courses sponsored by the Corps, ASCE and the State of California. Doug has authored or co-authored more than 310 technical publications and has completed consulting projects dealing with stream restoration, erosion protection of riparian cultural resources sites, streambank erosion, geomorphic assessment, sediment management, large wood design and local flooding....

Hydrology, Engineering - Water Resources focused on: Flooding, Floodplain Management, Drainage, Surface Water Hydrology, Hydraulic Structures, Grading, Erosion, Permitting, and other water resource issues.

...His experience includes dam safety, design and construction, energy, geographic information systems, groundwater hydrology, remote sensing, river systems, and surface water hydrology, in support of his expert witness practice focus area in water resources (flooding, floodplain management, drainage, hydrology, hydraulic structures, grading, erosion, and permitting). Mr. Blatchford served the United States Government (Interior, Reclamation) as the River Operations Manager on the Lower Colorado River, involved with water deliveries to Phoenix, Tucson, Los Angeles, San Diego, and irrigators in southern California, southern Arizona, and Mexico. He actively served west wide in Reclamation’s dam safety program, and interfaced extensively with the USGS, the USACE, NOAA, the Colorado River Basin Forecast Center (CBRFC), Mexico, and many irrigators, local and state agencies, and non-Governmental organizations. Mr....

Premises Liability, Products Liability - Garage Door,Gates,garage door spring,overhead door,automatic gate,automatic garage door,garage door operator,gate operator,garage,commercial door,industrial door,parking gate,swinging gate,sliding gate,barrier gate,sectional door,rolling door,high speed door,jackshaft,access system,remote control

Garage Door and Gate Contractor Accredited, Institute of Door Education & Accreditation UL325 National Standards Technical Panel Voting Member Litigation Consultant, Expert Witness Door Manufacturing Designer & Engineer President National Association of Garage Door Manufacturers Door & Access Systems Manufacturer’s Association International (DASMA) Founding Member and Committee Chair. President Martin Door Manufacturing, Bachelor of Business Management, Engineering Emphasis, University of Utah 1976 Door & Gate Contractor employing IDEA Certified Technicians Licensed Garage Door & Gate Contractor in 6 states....

Metallurgy, Failure Analysis - Design Defects, Material Selection, Engineering, Manufacturing Defects, Manufacturing, Quality Control, Mechanical Failure, Corrosion, Fitness for Use, Equipment Operation, Equipment Maintenance, Trade Secrets

...Cases have involved hand tools, recreational and exercise equipment, fire fighting apparatus, rotating machinery, construction hardware, fasteners, joints, piping, tubing, lighting fixtures. 40+ yrs designing, manufacturing and quality assurance of components for consumer & industrial products including safety and performance-critical applications for aircraft, automotive safety systems, medical products, construction machinery, defense arms and munitions. Mr. Caldwell has testified in patent infringement and trade secret misappropriation cases. He has lectured in the USA, Europe and India on manufacturing premium quality metal products. He has published in the areas of batteries, materials selection and materials processing. Licensed Professional Engineer, Ohio. US Patent holder.

Construction Defects, Construction - Slate Roofing, Copper Roofing, Steeple Inspection, Tower Inspection, Roof Design, Historic Restoration, Building Envelope, Waterproofing, Cedar Roofing, Tile Roofing, Single-Ply Membrane, Roofing Specification, metal roofing, masonry, walls, windows, below-grade, waterproofing, construction defects

As Principal of Fulmer Associates LLC, Robert Fulmer utilizes his 38 years of professional practice and consulting experience within the building enclosure construction industry, to provide building exterior design, assessment and project management services for institutional, academic and residential structures through the application of contemporary building science and current industry standards. Robert’s professional experience includes all building enclosure systems, including all types of low-slope and steep-slope roof systems, with extensive expertise in slate, copper, tile and wood roof systems. Also, included are all types of masonry wall and window systems, stucco, plaza decks and below-grade waterproofing. He is a published author and has lectured throughout the U.S. on various exterior building science topics....

Electrical Engineering, Energy - Electrical engineering & design, industrial automation & control systems, instrumentation, integration, process control, programmable logic controllers hardware & software, electrically hazardous areas, code evaluations, safety, electric power generation & distribution systems, power plants design

Electrical engineering, automation and process control systems design, instrumentation integration, process control, intrinsically safe (IS) circuits, surge protection, installation, programming & commissioning. Energy efficient systems, energy audits, prototype technologies design. Electrical design specifications & drawings, equipment and systems specifications including large machinery, for skids, containers, buildings, or entire campuses. Electrically hazardous areas. Code and/or safety evaluations. Electrical power generation & distribution, power plants, motors, motor control centers (MCC), variable frequency drives (VFD), transformers, switchgear, uninterruptible powers supplies (UPS). Commissioning and startup. Flammable gas facilities including natural gas, liquefied natural gas (LNG), compressed natural gas (CNG), liquefied petroleum gas (LPG), liquid nitrogen, propane and hydrogen.

Internet, Computers - Intellectual Property, Patents, Networking, Telecommunications, Wi-Fi, Cellular Communications, Wireless, Internet, Mobility, Broadband, Internet of Things, IoT, Cloud Computing, 3GPP, LoRa, Wi-Max, WPAN, TCP/IP, Protocols, Standards, Web Services, API, Big Data, Plastic Optical Fiber, SDN, NFV, SON

...Internet-of-Things (IoT), M2M, LoRa, LoRaWAN, LTE Cat-M, NB-IoT Hotspot 2.0 / Passpoint (for Wi-Fi) IPsec, IKEv2, L2/L3 tunneling, NAT/NAPT (firewall) SAML, SAMLv2 federation; oAuth, oAuth 2.0 authentication; RADIUS, DIAMETER Network & device management, Broadband Forum TR-69 and IETF SNMP standards Network Function Virtualization (NFV) Software Defined Networking (SDN) Self-Organizing Network and Self-Optimizing Network (SON) Web Services, REST/JSON API design & implementation Cloud computing, Amazon Web Services (AWS) Big Data, Avro, Parquet Plastic Optical Fiber (POF), Optical Networking Object-Oriented Design and Programming, Design Patterns (software) Go Lang, C, C++, Perl, LabVIEW, BASIC, Pascal, Unix shell scripting languages HTML, CSS, web design & development, web hosting, JavaScript, CGI Programming Operating systems (RTOS, various Unix/Linux variants, iOS, Android, etc.)...

Electrical Engineering

...Ferrese has over 20 years experience working with electrical, electronic, communication, and control systems including industrial control and SCADA systems. He has done extensive research in controls and computational intelligence for the United States military. He also has been involved with the design and construction of large scale software and hardware systems. Dr. Ferrese holds two patents and has over 20 technical publications. Provides forensic expertise from experienced engineers and scientists actively working in the laboratory and in the field; focus on forensic investigations and technical training and consultation; regularly publishing at conferences and in journals; communicate complex issues in a clear manner.

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client....

Security, Premises Liability - Security Standards, Security Operations, Security Practices, Major Crime Litigation, Assault, Homicide, Sexual Assault, Hospitality Security, Entertainment Venue Security, Casino Gaming Security, Retail Security, Nightclub Security, Contract Security, Cash-In-Transit Security, Executive Protection

...The ASIS CPP is the Gold Standard for Security Certification, to qualify must have 7 years of private sector security management experience, possess a bachelor’s degree or higher, complete a 225-question assessment test covering security standards and practices topics including; security operations, emergency/crisis management, investigations, risk management, asset protection, executive protection, information technology security, special event security, CCTV and electronic security systems. Recertification requirements including audited 60 CEU’s every three years. Thirty Years of Corporate Security Management in large Gaming Resorts in multiple jurisdictions, five years of experience overseeing Risk Management, Insurance and Claims function for 5 gaming/resort operations. 13 years’ experience as expert witness. Provided premises liability expert witness litigation support and consulting for over 190 cases....

Construction Defects, Architecture - stucco, building envelope, architecture, ADA, moisture intrusion, WUFI analysis, space frames, stairways, windows, building codes, roofing, delay claims, vapor barriers, air barriers, slip trip & fall, OSHA

...His career has included: full time work for a structural systems (space-frames) manufacturer, doing project engineering and later management; management of a hundred person architecture, engineering, landscape architecture, interior design firm; capital budgeting and owner led improvements of city government buildings; and the independent practice of architecture. Direct hands on experience includes construction inspections across North America, CADD contract documents, 3D computer modeling and animations. Management experience includes capital budgeting, project management and firm management. He is a voting member of ASTM Committee E:06 Performance of Buildings. He can bring building sciences to the table, as he has attended many WUFI advanced seminars and RCI conventions.. He started expert witness work in 2004 and has been a player in cases from ADA to trip and fall to architectural malpractice.

Security, Fire - Burglar Alarm, Alarm System, Security System, Alarm & Security, Central Station, Telephone Line Security, Fire Alarm, Smoke Detection, Carbon Monoxide, Panic & Holdup, Physical Security, Access Control, Video Surveillance Systems, Manufacturer Specifications, UL & NFPA Standards, Industry Standards.

A Master Alarm Technician, Certified Protection Professional (CPP), Board Certified in Security Management, Certified Fire Protection Specialist (CFPS), Certified Fraud Examiner (CFE), Senior Engineering Technician, Level IV Certified (SET) in Fire Protection Engineering Technology/Fire Alarm Systems, Certificate Number 111275 from NICET, Level I and II Certified Engineering Technician, Fire Protection Engineering Technology/Inspection and Testing of Fire Alarm Systems (FASI&T) from NICET, Certified Homeland Security Protection Associate Level IV (CHPA-IV)by The National Sheriffs’ Association in partnership with The Global Society of Homeland and National Security Professionals. Appointed and Serves on twenty-two (UL) Underwriters Laboratories, Inc. Standard Technical Panels (STP) and is a former Principal Technical Committee Panel Member, Appointed by NFPA 72®, in the Special Expert Category, for The National Fire Alarm Code And The National Fire Alarm and Signaling Code....

Mining, Geology - Hydrogeology, Hydrology, Geological Engineering, Mining Engineering, Tunnel Engineering, Geotechnical Engineering, Groundwater, Geology, Water Resources Engineering, Remediation Design, Hazardous Waste Management, Site Investigations.

...I provide senior technical advice and recommendations to the CBFO Manager, Assistant Manager and Director, Facility Engineering Division, on matters pertaining to mining engineering, ground control, mine safety, groundwater engineering, underground mine construction and drift, back and ribs maintenance, mine shaft and hoist construction and maintenance, surface mining facilities, and systems construction and maintenance, and input and coordinates with other CBFO staff. I graduated with degrees in mining and geological engineering from the Colorado School of Mines which is ranked #1 in the world in mining and mineral engineering by QS World University Rankings since 2016. I have supervised office and field personnel to complete feasibility studies and engineering designs and drawings for the production of base metals, oil and gas and water. I have worked in the United States, Germany, Poland, Saudi Arabia, Kurdistan-Iraq, Bolivia and Peru....

Mechanical Engineering, HVAC - Appliance malfunctions, Building assessments, Carbon-monoxide incidents, Electrical equipment failures, Fire sprinkler system malfunctions, Forklift/machine accident evaluations, HVAC, HVAC design, Industrial accidents, Pipe failures, Solar panel failures, Wind/flood damage, Winter Freeze-ups.

...Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. PROFESSIONAL LICENSURE: ~ Registered Professional Engineer: AZ, CA, CO, CT, FL, HI, IL, MA, MD, ME, MI, MN, NC, NH, NJ, NY, NV, OH, PA, RI, VA, VT, & WI ~ Certified Energy Manager (CEM) as endorsed by the Association of Energy Engineers ~ Certified Energy Auditor (CEA) as endorsed by the Association of Energy Engineers ~ LEED Accredited Professional as endorsed by the U. S....

Emergency Medical Services, Emergency Medicine - Emergency Medical Services, EMS, EMT, Paramedic, Standard of Care, Medical Malpractice, Cardiac Arrest, Airway, Intubation, Chemical Restraint, Refusal of Care, RMA, Violent Patient Management, Protocols, Trauma Care, Delay of Care, Sedation, Overdose, Wrongful Death, Negligence, Ambulance, Dispatch

...Extending into leadership, incident management, design and implementation of immersive educational scenarios, physician training, and emergency planning, I have experience in several widely varying aspects of my profession. In addition to management of countless incidents in a broad array of emergency services, I have also mitigated events ranging in complexity from multiple alarm fires to mass casualty incidents. I am a paramedic supervisor for both a municipal, fire-based EMS system (260 EMS providers) and a county emergency medical services system (90 EMS providers) I have participated in the design and implementation of educational, operational, safety, quality improvement, standard of care and EMS policies and procedures for EMTs, paramedics and physicians. As an expert witness specializing in pre-hospital emergency medicine, I have been retained by firms representing both defendants and plaintiffs throughout the United States....

Jails & Prisons, Security - Correction Officer Policies & Procedures, Premises Liability, Use of Force, Crime Prevention Through Environmental Design, Standards of Care, Security, Security Management, Conditions of Confinement, Physical Security, Security Guard Negligence, Jail & Prison Practices, Negligent Security

...Physical Security Assessment/ Application, Design, and Integration of Physical Security Systems / Implementation of Physical Security Measures. Marcello has earned the National Institute of Crime Prevention (NICP) Crime Prevention Through Environmental Design Professional Designation Certification (CPD). This certification suggests he is an expert in CPTED principles, skills, and the applications essential for creating a safer, healthier, and more sustainable human environment. Marcello is a Certified Corrections Executive (CCE) through the American Correctional Association (ACA). This certification signifies he can successfully develop and implement policies and procedures for Adult Correctional Institutions on the Federal, State and Local levels. Marcello is certified as a Work Place Violence Prevention & Intervention and Active Assailant Instructor with the Center for Personal Protection & Safety (CPPS)....

Architecture, Construction Defects - Architect & Engineer Negligence, Construction Defects, Fraudulent Change Orders, Construction License Agreement, Antitrust Complaint, Standard of Care Responsibility & Compliance, Warehouse Thermal Comfort, Bid Steering, Treachery & Self-Dealing Related to Professional Practice Industry Standards

...Expert Witness & Dispute Resolution 34 years Registered Architect 44 years Construction Executive 28 years Owner Representative 24 years Fred leverages his in-depth experience of leading cross-discipline teams of design & engineering professionals and construction management teams when presenting detailed opinions and support information in an understandable way. Fred’s work has included community boards, governing agencies, investors, General Services Administration - Offices of the Inspector General, FBI, multiple state courts (including Indiana, Illinois, California, Georgia, Florida, and New York), the New York County District Attorney’s Office (Labor Racketeering Unit, Construction Industry Strike Force), the New York City Office of Administrative Trials & Hearings, and the City of New York Police Department (District Attorney’s Office Squad)....

Engineering, Forensic Science - Forensic Engineering, Explosions, Electrical Engineering, Mechanical Engineering, Product Liability, Fires, Fire Protection, Appliances, Construction, Building Defects, Failure Analysis, Laboratories & Testing, Building Defects, Plumbing

...His expertise is in the field of forensic investigations of; product defects, fires/explosions, fire protection systems, accidents/injuries, building failures, and electro/mechanical system failures. He provides expert services involving product design, manufacturing defects and warnings/instructions. He has extensive experience in Utility Company procedures/equipment and investigating major incidents involving electrical, gas, steam system failures, and construction accidents. He has been retained on numerous large multimillion-dollar property damage cases as well as fatal accidents and fires/explosions including those that resulted in injury.

Pharmacology- Clinical, Pharmacist - Prescribing Error, Drug Interaction, Drug Toxicity, Overdose, Pharmacy Error, Pediatric Pharmacist, Polypharmacy, Adverse Drug Reaction, Pharmacy Practice, Pharmacy Standards, Pharmacy Malpractice, Drug Allergy, Pharmacogenomics

...He has maintained Board Certified Pharmacotherapy Specialist designation since 1998, is an active member of American Society of Health-System Pharmacists and New York State Council of Health System Pharmacists, and former member of the Pediatric Pharmacy Advocacy Group and American College of Clinical Pharmacy.

Electrical Engineering, Safety - Arc Flash, Shock, Arc Blast, Electrical Accident, Power System Studies, NFPA 70E, Electrical Code, Utility Distribution, Stray Voltage, NESC, IEEE,

...He has designed power distribution, lighting, control systems, fire alarm and security systems for utility, industrial, commercial, and pharmaceutical clients. Mr. Strang’s specialty is power systems analysis and the engineering of medium and high voltage distribution systems and substations. He has lectured at several conferences and is an expert in the field of short-circuit analysis, overcurrent protective device coordination studies, and arc-flash calculations. Mr. Strang has lectured at many safety conferences and provided electrical safety training for many companies. Deposition and trial experience.

Software Engineering, Computers - Cybersecurity, Software Architecture, Artificial Intelligence, Cryptocurrency / Blockchain, Speech & Face Recognition, ESI Protocol, Social Media Forensics, Biometric Identifiers, Code Review, Patent Infringement ,Trade Secret, IPR, PTAB, Claim Analysis, Forensic Data Extraction, BIPA

...- In addition to his blockchain development experience, he designed the first cryptocurrency arbitrage system....

Toxicology, Environmental - Dram shop, DNA, Product Liability, Statistics, Drug Impairment, Chemical Impairment, Family Law, Due Diligence, Criminal, Civil, Drug Testing, Toxic Tort

...Burgoon served as a senior leader in various roles from leading teams of biostatisticians and bioinformaticians in designing and analyzing toxicology studies, to supervising toxicologists and public health scientists in the development of toxicological and dose-response assessments in support of the US EPA Integrated Risk Information System (IRIS). At the US Army, Dr. Burgoon led classified and unclassified programs and projects with a focus on the effects of chemical, biological, radiological, nuclear, and high yield explosives (CBRNE) on human health, ecological and agriculture systems. Dr. Burgoon’s expertise is in pharmacology, toxicology, biostatistics, exposure modeling, causal analysis, risk assessment, especially in the area of establishing causal relationships of chemical exposures to human effects and the development and application of mathematical modeling, machine learning solutions for computational pharmacology and toxicology. Dr....

Construction, Equipment & Machinery - Crane accident, rigging accident, crane, rigging, hoist, wire rope, slings, straps, chokers, rigger, boom truck, construction accident, industrial accident

...Nuclear crane experience Certifications (Current and Former) NCCCO Certified Rigger NCCCO Accredited Rigger Practical Examiner NCCCO Certified Signalperson NCCCO Accredited Signalperson Practical Examiner NCCCO Certified Overhead Crane Operator NCCCR Accredited Mobile Crane Operator License Examiner NCCCR: Certified Exam Administrator NCCCR: Certified Master Trainer Trico-Lift Trained Rough Terrain Forklift Operator NIASE Certified Mechanic Technical Memberships and Committees American Society of Mechanical Engineers (ASME), member ASME B30 Safety Standards for Cableways, Cranes, Derricks, Hoists, Jacks and Slings, main committee ASME P30 Planning for the use of Cranes, main committee member ASME B30.9 Slings, subcommittee member ASME B30.23 Personnel Lifting Systems, subcommittee member ASME B30.24 Container Cranes, subcommittee member ASME B30.26 Rigging Hardware, subcommittee former chair NCCCO Lift Director Management Committee Crane Institute Certification (CIC) Lift Director Exam...

Biomechanics, Blasting and Explosives - injury biomechanics, blast trauma, explosives, undersea medicine, hyperbaric physiology, ballistic trauma, extreme environments, trauma, diving, scuba, submersible, submarine, outer space, hypoxia, breathing system design, traumatic brain injury, TBI, military history, medical history, underwater

...I began my career working as a civilian mechanical engineer for the US Navy, where I specialized in the design, function testing, and safety testing of underwater equipment and breathing systems intended for use by military personnel, and I was both the project engineer and project manager for the first approval effort for a new military underwater breathing system to be successful since the 1970s. Concurrent with part of my employment with the navy, I earned a doctorate degree in biomedical engineering from Duke University, specializing in injury biomechanics, which is the application of the principles of engineering to determine the injury mechanisms and safe limits during events when human beings are at risk of injury or death. My goal for my career is safety and prevention....

Hospitalist, Information Technology - Internal Medicine, Informatics, EHR, EMR, electronic medical records, electronic health records, patient portals, medical records, IT, board certified, Medical Director, Internist, negligence, injury, damages, causation, malpractice, quality of care, standard of care, professor, medication error

...Hands on experience for over 10 years as a hospitalist and medical faculty at Duke University Health System. Served as director of 30+ FTE academic and clinical hospital medicine program in Connecticut for over three years. Excellent communication skills from teaching Duke physicians and giving academic presentations and lectures. Duke University, University of Connecticut, and Tufts University educated physician board certified in both internal medicine (hospital medicine focused) and clinical informatics. Awarded Phi Beta Kappa and Summa Cum Laude from Clark University. Recipient of Senior Fellow in Hospital Medicine designation from the Society of Hospital Medicine and Scholars Award from Duke University. Received training from SEAK in expert witness testimony. Over 5 years of medical informatics experience as Associate Medical Informatics Officer at Duke Regional Hospital and Informatics Physician Champion at Duke University Health System....

Building Inspection, Construction Defects - Roofing, EIFS, Waterproofing, Flashing, AAMA, Water Testing, Building Envelope, Wall defects, Water Intrusion, RRC, Roofing Defects, Roofing Failures, Infrared Thermography, Tramex, EIFS Inspector, Adhered Stone, Plaza Deck, Balcony, Sheet Metal, Curtain Wall.

Registered Roof Consultant (International Institute of Building Enclosure Consultants) Registered Roof Observer (International Institute of Building Enclosure Consultants) Registered Exterior Wall Observer (International Institute of Building Consultants) Construction Document Technologist (Construction Specification Institute) Level One Infrared Thermographer Certified EIFS Inspector (Association of Walls and Ceilings) Certified EIFS Inspector and Level I and II Inspector (Exterior Design Institute) Adhered Stone Certification (Exterior Design Institute) After growing up in a family run commercial roofing business (3rd generation), I have over 35 years experience in the roofing, sheet metal, and construction industry. My knowledge includes all phases of roofing (Single ply, TPO, EPDM, Modified Bitumen, Built-up Coal Tar, PVC, Shingles, Metal Roofing, Clay Tile, and Slate) as well as related sheet metal work....

Geriatrics, Guardianship/Conservatorship - Elder abuse, disability, senior, healthcare power of attorney, healthcare advocate, social work, care management, case management, long-term care, assisted living, memory care, guardian, nursing home, assessments, cognitive impairment, dementia, conservator, exploitation, elder fraud

...For the past 15 years, I have served as a private guardian for older individuals who have been adjudicated in our court system. I serve as a Board Member of the North Carolina Guardianship Association and am a member of the National Guardianship Association. I became certified as a guardian in 2017 and am currently one of only 52 National Master Guardians in the country. This is the highest professional designation that can be attained by guardians and it requires extensive demonstration of competencies in a variety of areas, a comprehensive exam, and at least 15 years of experience in the field of guardianship. In our routine work as both care managers and guardians, we conduct clinical assessments of older adults and persons with disabilities, create care plans and evaluate existing care plans, advocate for the highest possible quality of care for our clients....

Mechanical Engineering, Products Liability - Snowplow, snow, ice, snow and ice removal, salt spreader, towing, pintle hook, ball mount, lunette, trailer, truck, snow plow, gritter, cartridge valve, hydraulics, aftermarket truck accessories

28 years of experience in mechanical engineering working as a product engineer, developer, trainer, and communicator in the automotive, hydraulic and truck accessory industries. 17 years designing, developing, launching, and managing the SnowDogg snowplow product line while overseeing and developing a wide range of towing, lighting, and snow and ice removal truck accessories. Experience includes depositions and trial testimony in multiple liability, patent and business issues. Responsible for pursuit of corporate patents, and current holder of 4 active patents with 3 pending. Areas of expertise include: • Snowplows and related mechanical, hydraulic and electrical systems • Salt Spreaders and related mechanical, hydraulic and electrical systems • Truck Towing Products – Pintle Hooks, Couplers, Hitch Balls and relevant SAE standards • Truck Accessory Design and Mounting • Dealer Training and Technical Communication • Product Development, Engineering and Lifecycle Management

Human Factors, Engineering - Distracted driving, Driving behavior, Reconstruction, Biomechanics, Maritime, Manufacturing, Mining, OSHA, Premises Liability, Products Liability, Safety, Slips, Trips, Falls, Transportation, Warnings, Conspicuity, Cell phones, Texting, Lighting, Perception, Visibility, Instructions, Human Factors

...His expertise involves investigating how people interact with other people, products and environments in predictable ways, and applying this understanding to effective, efficient and safe products, services and systems. He has been retained as an expert in more than 40 states (+ Puerto Rico). Dr. Rider’s expertise includes: • MVAs and pedestrian collisions, incl. trucks, trains, buses, motor/bicycles • Illumination, nighttime visibility, and conspicuity • DUI/DWIs, where intoxication was not a proximate cause of crash • Adequacy of product designs and warnings • The design and maintenance of safe civil and occupational environments • Premises liability, and slips, trips and falls • Workplace and construction safety Dr. Rider is a Professional Engineer (PE), a Certified Professional Ergonomist (CPE), and has served as a human factors consultant since 1999, including five years as a professor at West Virginia University. Dr....

Police Practices & Procedures, Law Enf & Criminal Justice - Criminal Justice, Police Policies, Domestic Violence, Crowd Control, Use of Force, Excessive Force, Sexual Assault, Drug Enforcement, Surveillance, School Safety, Crisis Intervention, Baton, Taser, Firearm, Electronic Control Device

.... • Served on Multi-jurisdictional SWAT Team • Patrol Rifle Operator / Designated Marksman Certification • Certified Firearms Trainer • Field Training Officer and Supervisor • Police Honor Guard 2004 through 2015 • Additional command capacities: • New World Reporting System Build Team / Training of supervisors and Officers, Mobile Field Force Unit Commander Career Accolades With Sterling Heights Police Department • (6) Merit Citations (2) Chief's Awards • (7) Performance Awards • (11) Perfect Attendance • (19) Letters of Commendation

Telecommunications, Arbitration/Mediation - Toll-Free Numbers, Toll-Free Disputes, Toll-Free Lawsuits, Toll-Free Arbitration, Toll-Free Contracts, Toll-Free Industry, Toll-Free Regulations, SMS/800 Tariff, FCC, SMS/800, Resp Orgs, End Subscribers, Warehousing, Hoarding, Reselling, Toll Free, toll-free, toll free numbers

...Initially, he worked for three (3) years as a System Engineer in the SMS/800 Software Development organization at Bell Communications Research (BELLCORE). His next assignment was a one-year position as a Solution Architect in the Intelligent Networks division where he developed Local Number Portability and Number Pooling industry solutions. Erik eventually accepted a position as the Senior Vice-President of Operations at Database Service Management, Inc. (DSMI), an independent subsidiary of Telcordia Technologies. DSMI was designated in 1993 as the North American Toll-Free Administrator (NATFA) and manager of the SMS/800 system. He held this position until 2013. In 2013, the NATFA and SMS/800 system responsibilities were assigned to SOMOS, LLC. During the transition, he personally assumed the position of NATFA for approximately two (2) years....

Construction, Equipment & Machinery - Crane accident, rigging accident, crane, rigging, hoist, wire rope, slings, straps, chokers, rigger, boom truck, construction accident, industrial accident

...Nuclear crane experience Certifications (Current and Former) NCCCO Certified Rigger NCCCO Accredited Rigger Practical Examiner NCCCO Certified Signalperson NCCCO Accredited Signalperson Practical Examiner NCCCO Certified Overhead Crane Operator NCCCR Accredited Mobile Crane Operator License Examiner NCCCR: Certified Exam Administrator NCCCR: Certified Master Trainer Trico-Lift Trained Rough Terrain Forklift Operator NIASE Certified Mechanic Technical Memberships and Committees American Society of Mechanical Engineers (ASME), member ASME B30 Safety Standards for Cableways, Cranes, Derricks, Hoists, Jacks and Slings, main committee ASME P30 Planning for the use of Cranes, main committee member ASME B30.9 Slings, subcommittee member ASME B30.23 Personnel Lifting Systems, subcommittee member ASME B30.24 Container Cranes, subcommittee member ASME B30.26 Rigging Hardware, subcommittee former chair NCCCO Lift Director Management Committee Crane Institute Certification (CIC) Lift Director Exam...

Medical Devices, Biomedical Engineering - Mechanical Engineering, R&D, Product Development, Clinical diagnostics, Blood collection, Biospecimens, Point of care testing, Microfluidics, Spectroscopy, Cell therapy, Intellectual Property, Microscopy, Physics, Biomedical sensing, Optics, Imaging, Mathematics, Laboratories & Testing, Lasers

...He has particular expertise in mechanical engineering design and development of non-invasive and minimally invasive biomedical diagnostics systems, blood collection and stabilization, blood separation, and blood and cell preparation for both diagnostic and therapeutic applications, including the development of sample collection devices, needles, and lancets. He is co-inventor on 23 patents for devices and methods in blood collection and processing. Yale educated PhD Physicist with 30 years experience in medical devices, diagnostics, and biomedical engineering. Expertise in product development, in vitro diagnostics, point of care testing, blood collection, separation, and sample preparation, optics, sensors, infrared, optical, & X-ray spectroscopy & imaging instrumentation for measurements of physical, chemical, & biological material properties....

Mechanical Engineering, HVAC - HVAC, plumbing, construction defects, construction engineering, energy, failure analysis, engineering, refrigeration

...The firm performs building system design work, forensic analysis, expert witness consulting, product liability consulting, construction cost analysis and construction claims consulting. The staff is comprised of professional engineers and former construction executives. We are licensed engineers and licensed contractors and have performed consulting work in over 30 states. Our clients include contractors, homeowner associations, commercial building owners, tenants, hotels, casinos, design professionals, manufacturers, law firms, insurance companies and individuals. We know what it takes to design, bid and construct projects. IEI was founded in 1994 in San Diego, California. We have offices in San Diego; Clearwater Florida; and Richmond, Virginia and provide consulting and expert witness services nationwide. Each of our engineers are licensed as professional engineers in multiple states. These licenses cover approximately 30 states....

Environmental Engineering - Legionella, Spa, Outbreak Management, Legionnaires' disease, Hot Tubs, Ornamental Fountains, Waterborne Pathogens, Potable Water, Cooling Towers, Outbreak response, Litigation Support

Tim Keane is recognized nationally and internationally as a Leading Expert on methods to Control, Mitigate and Assess the Risk for Legionella in building and industrial water systems as well as standards of care needed for control of Legionella in water systems. He has published articles and books on the subject and has co-written regulatory documents including the 2018 and the 2015 ASHRAE Standard 188 titled: Legionellosis: Risk Management for Building Water Systems, ASHRAE Guideline 12 titled: Managing the Risk of Legionellosis Associated with Building Water Systems, 2005 Guidelines for Ornamental Fountains and the 2000 ASHE Advisory. Mr Keane has over 24 years experience in Legionella consulting, 14 years experience in water treatment consulting and over 10 years experience in facility design, construction and operation....

Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation

...Kiddy's work experience includes the oil and gas industry, aircraft and helicopter design, marine structures, wind turbines, and telecommunications. From a technical perspective, Dr. Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr. Kiddy is a registered professional engineer in five states, a certified fire and explosion investigator, and an FAA certified drone pilot. Dr. Kiddy's also has substantial experience in intellectual property matters ranging from invention disclosures, patent writing, patent prosecution, and continuing through IP disputes. Dr....

Architecture, Construction - Healthcare Architecture, OSHPD, BIM, Integrated Project Delivery, Lean Construction, Construction Defects, Construction Claims, Quality Control/Quality Assurance, Hospitals, Schools, Slip and Fall, ADA, Contractor Non-Conformance, NAVFAC, Change Orders, Owner Payment Claims.

...Integrated Project Delivery and Lean Construction consultant. 20 years Architecture Experience -Design and Construction Administration experience in -Healthcare (Large California Hospitals and Medical Centers), Multi-family, Retail, Tenant Fit-out, K-12 Schools, NAVFAC contract administration and Office Buildings. 20+ years Owners Representative/Construction Administration experience in - multi-site K-12 school district design and construction program (including multiple prime contractor projects) and California Hospital and Healthcare portfolio management. Developed and deployed innovative practice, design, production and delivery methodologies. Created globally distributed outsourced CAD and BIM teams through integrated design and construction workflows for multiple architecture, contractor, and owners including BIM execution plans, and linking BIM files to the owner's facility and space planning systems....

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client....

Civil Engineering, Geotechnical Engineering - Stormwater, Erosion and Sediment Control, Hydrology, Landslides and Slope Stability, Foundations, Settlement, Retaining Walls, Geohazards, Pavement Evaluation and Remediation, Earthwork, Construction and Materials Testing, and Americans with Disabilities Act (ADA) Accessibility.

...His experience includes providing geotechnical engineering design/expertise for all aspects of land development and construction. Projects have included establishing procedures for subsurface explorations, boring layout, soil sampling, and laboratory testing programs. Michael has authored geotechnical reports regarding deep, shallow, and specialty foundation construction for projects in the real estate, natural gas, manufacturing, mining and public client sectors. Also, he has investigated and provided remedial recommendations for landslides, carbonaceous (expansive) shale, retaining walls, karst, geohazards, and mine grouting/subsidence. His responsibilities have included preparing bid packages, authoring specifications, and construction level drawings, as well as preparing expert reports for the legal and insurance industries....

Engineering, Manufacturing - Engineering Design, Manufacturing Processes, Manufacturing Costs, Industrial Construction, Heavy Machinery, Project Management, Capital Cost Estimating, Quality Assurance, Industrial Safety, Process Scale-up, Pilot Plant, Biomass, Supercritical Fluids, and Slurry Pumping.

Expertise in engineering design, manufacturing processes, manufacturing costs, industrial construction, heavy machinery, project management, capital cost estimating, quality assurance, and industrial safety. Specific technical skills in industrial plant construction, pilot plants, process scale-up, commissioning & testing, and troubleshooting. Specific technical skills in biomass handling, slurry pumping, supercritical fluids, mixing systems, liquid/solid separation, control valves, compressed-air systems, material handling, and mechanical systems. Experienced expert witness in testimony and report writing, retained by both plaintiff and defense counsels, in cases involving manufacturing process design, facility decontamination/relocation, and industrial accidents. Over 30 years of experience in process design and manufacturing for start-ups to Fortune 100 companies in power generation, biomass conversion, and building material industries. Education includes BSME, MSME, and MBA....

Transportation, Industrial Design - wheelchair transportation, biomechanics, public transit, railcar boarding, accessible air travel, wheelchair securement, wheelchair restraint, seatbelt, crash safety, ergonomics, accessibility, paratransit, wheelchair lift, medical device, ramp, school bus, walker safety, warnings, usability, ADA

...Linda van Roosmalen brings over 25 years of experience in wheelchair transportation safety as a designer and researcher at the University of Pittsburgh. She is a key member of a select group of experts dedicated to researching Wheelchair Transportation Safety. Over the past two decades, Dr. van Roosmalen has been retained by both plaintiff and defendant councils, providing her expertise in various cases, including: • Wheelchair transport safety on school buses, public buses, paratransit, non-emergency transport, private vehicles, rail systems, and airplanes. • Lift and ramp access. • Securement of wheelchairs and scooters, along with associated labeling. • Seat belt restraints for wheelchair-seated occupants and related labeling. • Accessibility for wheelchair users in various environments, such as sidewalks, crosswalks, bathrooms, amusement parks, and public vehicles....

Construction Defects, Architecture - stucco, building envelope, architecture, ADA, moisture intrusion, WUFI analysis, space frames, stairways, windows, building codes, roofing, delay claims, vapor barriers, air barriers, slip trip & fall, OSHA

...His career has included: full time work for a structural systems (space-frames) manufacturer, doing project engineering and later management; management of a hundred person architecture, engineering, landscape architecture, interior design firm; capital budgeting and owner led improvements of city government buildings; and the independent practice of architecture. Direct hands on experience includes construction inspections across North America, CADD contract documents, 3D computer modeling and animations. Management experience includes capital budgeting, project management and firm management. He is a voting member of ASTM Committee E:06 Performance of Buildings. He can bring building sciences to the table, as he has attended many WUFI advanced seminars and RCI conventions.. He started expert witness work in 2004 and has been a player in cases from ADA to trip and fall to architectural malpractice.

HMO, Medical Management - Accountable Care, HMO & Managed Care, Appeals & Grievances, Hospital & Provider Credentialing, Utilization/Medical Necessity, Healthcare Fraud/Abuse, Utilization Review, Qui Tam, Physician Quality of Care, Physician Sanctions, Defamation, Disruptive Physicians, Population Health, Sleep Medicine

...He holds patents for improved emergency patient flow system design and improved effectiveness for patient engagement in obesity, cholesterol, high blood pressure, and diabetes management. With current licensure in Kentucky, North Carolina, Pennsylvania & Virginia, Dr. Brown is board-certified in emergency medicine and internal medicine. As an experienced public speaker and communicator, he serves as Chief Medical Correspondent at station WVGB-FM in Beaufort, South Carolina.

Plumbing, HVAC - Plumbing, plumbing systems, plumbing codes, plumbing design, plumbing engineering, piping, hot water systems, scalding, Legionella, fuel gas systems, gas appliances, gas venting, carbon monoxide poisoning, HVAC, HVAC design, fire protection, sprinkler systems, construction defects, failure analysis

...His experience includes plumbing, HVAC, and sprinkler system design, forensic analysis, and expert witness consulting. For the past 15 years, Mr. Griffith has provided expert witness services, including deposition and trial testimony. In addition to plumbing, HVAC and sprinkler systems, his areas of specialty include hot water system design, hot water scalding, legionella, and venting of gas appliances as it relates to carbon monoxide poisoning. Mr. Griffith is a Board Certified Diplomate Forensic Engineer (DFE) of the National Academy of Forensic Engineers (NAFE). Prior to founding Griffith Engineering in 1997, Mr. Griffith worked at the Tennessee Valley Authority (TVA), an electric utility, as a nuclear piping analyst, valve and heat exchanger specialist, maintenance engineer and later maintenance supervisor at a fossil plant, and quality manager. There his engineering roles included failure analysis of plant equipment....

Real Estate, Property Management - property management expert, standard of care, maintenance, inspection, CPM, landlord duty of care, property injury, residential, commercial, instructor, author, parking lot, slip, trip, fall, policies, procedures, training, IREM, BOMA, balcony, balconies, safety, operations, premises liability

...I am also an Instructor for Tennessee Real Estate Education Systems (TREES), teaching pre-license real estate courses in Tennessee.   I hold a Certified Property Manager (CPM®) designation and an Accredited Residential Manager designation (ARM®) from the Institute of Real Estate Management (IREM®), a Distinguished Real Estate Instructor (DREI®) designation from the Real Estate Educators Association (REEA) and am an active real estate licensee in both California and Tennessee.

Construction, Construction Defects - Construction Defects, Construction Scheduling, Construction Management, Building Codes, Healthcare/Commercial/ and Residential Construction, Construction Contracts, Construction Claims, Construction Planning, Insurance Claims Evaluation, Construction Cost Estimates

...In building design, construction, facilities management, and performance on different types of contracts, Scoville and Associates (S&A) provide services to attorneys representing defendants and plaintiffs, insurance companies and institutions, and private individuals. Experience in construction is extensive. Experience in legal cases is three, with one still awaiting trial. Services include reviewing contracts and project records to assess adherence to contractual obligations. Scoville & Associates, Inc. performs site surveys when an on-site review is needed: photographing and noting pertinent conditions. If instructed, the research includes reviews of court filings, codes, designs, contract documents, and correspondence. S&A Analyzes information gathered versus contracts, building codes, project-specific design requirements, and personal experience. S&A verbally communicates preliminary conclusions to the supervising attorney....

Products Liability, Manufacturing - Testing, Failure Analysis, Ergonomics, Product Design, Manufacturing, Mechanical Engineering, Premises Liability, Structural Engineering, Warnings and Labels, Slip, Trip & Fall, Metallurgy, Machinery/Equipment

I have 37 years of engineering design experience in multiple industries. I have developed designs for aerospace, consumer products, industrial machinery and products for use in retail environments. Strong manufacturing background and familiarity with all types of manufacturing equipment and processes. These include CNC cutting equipment, roll forming, stamping and progressive dies, Mig, Tig, and high frequency welding, robotics and automated manufacturing processes, assembly, finishing and packaging systems. I have the ability and resources to do physical testing of products, materials, including destructive and non-destructive testing. Strong analytical skills to assess product design and performance empirically and theoretically relative to specific industry standards. I am well versed in safety warnings and labels, and the responsibilities these requirements place on manufacturers of products and equipment.

Construction Defects, Premises Liability - Architecture, Construction, Construction Defect, Fire Protection, Fire Suppression, Fire-Resistive Assemblies, Residential Construction, Commercial Construction, Building Codes, Premises Liability, Slip & Fall, Trip & Fall.

Registered architect with NCARB certificate in twenty states (licensed in more states than are listed in this directory), with an active design and forensic practice. As a forensic architect, his experience includes among other things, performing analysis of standard of care in building design and construction projects; performing analyses of building systems including roofing systems, window and door systems, exterior wall cladding systems, waterproofing and foundation systems, with a specialization in fire-resistive assemblies and active fire-protection systems. His experience includes premises liability investigation and analysis of accident sites relating to the built environment, both indoors and outdoors. As a design architect, his practice includes traditional architectural practice including building design, building code analysis & application, and services during construction....

Medical Devices, Intellectual Property - Infusion Pumps, Sleep Apnea, CPAP, Humidification, Oxygen Concentrators, Oxygen Conserving Devices, Breathe Detection, Electronic Cigarettes, Instrumentation, Sensing, Patent (IP) Cases, Product Liability Cases

...Areas of expertise: Peristaltic and Syringe Infusion Pumps, Sleep Apnea or CPAP Devices, Oxygen Concentrators, Oxygen Conserving Devices, Breathe Detection, Electronic Cigarettes, Sensing, Gas and Diesel Engine Control Engineering experience: Electrical engineering, System Engineering, Product Development Leadership, Manufacturing, Testing, Circuit Simulations, 6 Sigma Black Belt, Design Control, Risk Management, Failure Analysis, Technology Development Primary Area of Expertise: Medical Devices, Electronics

Civil Engineering, Hydrology - flood, drainage, storm, water, floodplain, dam, hydraulics, FEMA, municipal, stormwater regulation, flood plain analysis, dam construction and maintenance, road construction and repair, water resources, runoff, flow, pipe, street, utility

...Performed numerous flood studies for rivers and creeks, bridge hydraulic studies, reservoir analyses, drainage designs and storm water pollution prevention plan designs. Experienced with dams. Designed new dams, performed inspections, analyzed seepage conditions, developed rehabilitation programs, developed Emergency Action Plans, developed foundation-grouting programs and constructed and operated physical models. Experienced city engineer, having served in multiple cities. Designed public street, drainage, and utility improvements. Reviewed subdivision plats, proposed utility modifications and ordinances. Experienced in site development and subdivisions. Designed roads, utilities, lot layouts, grading plans, detention ponds and drainage systems for residential and commercial subdivisions. Experienced in public presentations and teaching. Taught university-level lab classes and recitations as a teaching assistant....

Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.

...With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi....

Engineering, Security - Information Technology, Low Voltage Systems, HVAC, HVAC Controls, Building Automation Systems, Fire Alarm Systems, Risk Assessments, Audio-Visual Systems, Commissioning, SCADA, Video Surveillance Systems, Access Control Systems, CATV, Integrated Systems, Smart Building Technologies, Cabling Systems

...He is a Certified Protection Professional (CPP) by ASIS International, a Building Commissioning Professional (BCxP) by the American Society of Heating, Refrigerating and Air-Conditioning Engineers, a Leadership in Energy and Environmental Design (LEED) Accredited Professional by the US Green Building Council, and a Certified Homeland Security (CHS) III by the American Board for Certification in Homeland Security. John has been involved in the design of highly integrated and smart technology systems for buildings for several decades. He has overseen the implementation of hundreds of high profile and iconic facilities across the world....

Animals, Agriculture - fence expert, livestock expert, horse collision, cattle collision, escaped livestock, livestock/vehicle collision, ranch management, equine facilities, riding, escaped cattle, escaped horses, livestock fence, livestock fencing, cattle fencing, horse fencing, pasture management, rodeo

...He is an expert on the design, installation and maintenance of all types of livestock fencing, including barbed wire and field fence; rail fence systems; electric fence systems and gates. He is also an expert on livestock handling practices, livestock equipment, and livestock facilities such as feedlots, arenas, auction barns, equestrian facilities and racetracks.

Architecture, Construction Defects - Architect & Engineer Negligence, Construction Defects, Fraudulent Change Orders, Construction License Agreement, Antitrust Complaint, Standard of Care Responsibility & Compliance, Warehouse Thermal Comfort, Bid Steering, Treachery & Self-Dealing Related to Professional Practice Industry Standards

...Expert Witness & Dispute Resolution 34 years Registered Architect 44 years Construction Executive 28 years Owner Representative 24 years Fred leverages his in-depth experience of leading cross-discipline teams of design & engineering professionals and construction management teams when presenting detailed opinions and support information in an understandable way. Fred’s work has included community boards, governing agencies, investors, General Services Administration - Offices of the Inspector General, FBI, multiple state courts (including Indiana, Illinois, California, Georgia, Florida, and New York), the New York County District Attorney’s Office (Labor Racketeering Unit, Construction Industry Strike Force), the New York City Office of Administrative Trials & Hearings, and the City of New York Police Department (District Attorney’s Office Squad)....

Business Operations, Aviation & Aerospace - International Business Development, International Trade, International Arms Trade, Manufacturing, Environmental and safety compliance, Plant Management, Business Practices, Corporate Investigations, Business Practices, Business Administration

.... - Aircraft structures: the design, manufacture, assembly, and final aircraft assembly. Functions included metal fabrication, composites, aircraft wiring, assembly, tooling, and systems integration of components such as horizontal stabilizers, nacelles, flight controls, wings, and assembly of the aircraft. - Electronics manufacturing: PCB manufacturing, “black” box assembly, test, and sub-system integration. - Aircraft modification, integration and testing: design, development, test and delivery of highly complex systems including airborne and ground-based avionics, weapons and surveillance systems. - Operational maintenance of aircraft. He has been engaged as an expert witness for business practices and executive management. In addition, he was a fact-witness in intellectual property, trade secrets, and anti-trust cases before becoming a consultant....

Mechanical Engineering, HVAC - Building Science, Insulation, Building Assessment, HVAC, Water Intrusion, Design Flaw/Defect/Failure, Condensation, Buildings, Forensic Analysis, Building Envelope, Building Forensics, Humidity Control

...Middlebrooks is an experienced mechanical engineer specializing in evaluating failures of HVAC systems and their impact on wall and roof assemblies. He regularly provides opinions based on analysis of cooling and dehumidification design strategies and the occurrence of condensation on surfaces such as insulated pipes and within wall systems.

Structural Engineering, Civil Engineering - Engineering Design, Consulting Engineering, Structural Analysis, Infrastructure, Concrete, Steel Structures, Engineering, Construction, Grading, Drainage, Steel, Concrete, Foundation, Brick, Building, Structure, Frame, Masonry, Flooding, Flood, Damage, Pool, Leaking, Roof, EIFS, Stucco

...Patrick has a background in structural and civil engineering, including civil site development, structural design, structural forensics, highway and associated structure analysis and evaluation, retaining wall evaluation, flood mitigation and floodproofing, building envelope consulting, and finite element analysis of structural systems. Amy is a licensed professional engineer in Texas and California and has been an adjunct professor at the University of Houston-Downtown's Structural Analysis and Design program since 2013. She is an experienced expert witness in construction defect litigation.

Security, Oil and Gas - International Security, Corporate Security, South and Southeast Asia

...Following the merger of Exxon and Mobil, Ray initially served as the Senior Security Program Advisor for Special Operations and Management Systems Interface. In this capacity, he managed field operations for the new corporation in high-threat areas and coordinated other trans-regional issues. In September 2003 Ray assumed responsibility for the security of ExxonMobil’s natural gas production operations in Aceh, Indonesia. This environment was one of the most complex and challenging within the corporation as Aceh was the site of the longest running insurgency in Asia. Following the cessation of hostilities in Ache in mid 2006, Ray was reassigned as Security Manager for Mobil Equatorial Guinea, Inc. This company was unique in that it encompassed both major on and off-shore activities in the demanding West Africa environment....

Electrical Engineering, Fire - Transformer, motor, generator, UPS, circuit breaker, switchboard, electrical fire, electrical insulation failure, short circuit, fault current, Arch flash, fire alarm, field investigation.

...Duties include but not limitted to: equipment failure analysis, writing technical reports, writing business case, project budget preparation, project managment, review and recommend expert solutions, electrical saftey, energy savings, promotes clean energy systems design for the 130 acres of Travis County Correctional Complex and Travis County Jail. Worked internationally (Bangladesh, Malaysia, Brunei Darussalam and the USA). Experienced in applying British Standards, International Building Code, National Electrical Code (NEC), National Fire Alarm Code (NFPA), National Electrical Safety Code (IEEE SA) etc....

Mechanical Engineering, Forensic Science - Electrical Engineering, Energy, Equipment & Machinery, Failure Analysis, Fire, Laboratories & Testing, Oil and Gas, Products Liability, Product, Plumbing, Leak, Warnings & Labels, Guarding, CSST, Gas Explosions, Natural Gas, Propane, LPG, Forensic Engineering, Expert Witness

...Engineer License #0402061315 -Michigan Professional Engineer License #6201069726 -Minnesota Professional Engineer License #58020 EDUCATION: -BSME, University of Texas at Arlington, 1978 AFFILIATIONS: -MEMBER, American Society of Mechanical Engineers (ASME) -SENIOR MEMBER, National Academy of Forensic Engineers (NAFE) -MEMBER, National Council of Examiners for Engineering and Surveying (NCEES) -MEMBER, National Society of Professional Engineers (NSPE) -MEMBER, Texas Society of Professional Engineers (TSPE) -Pi Tau Sigma -Tau Beta Pi PRIMARY AREAS OF EXPERTISE: -Fire and Explosion Analysis Fuel Gas Fires and Explosions Residential, Commercial, Industrial Gas-Fired Equipment and Household Appliances Engineering Assistance for Fire Investigators -General Products and Equipment - Mechanical and Electrical Determination of Cause of Failure and Accidents Evaluation of Safety, Warnings, Guarding Compliance with Standards Analysis/Evaluation - Machine and System...

Forensic Pathology, Anatomic Pathology - Autopsy, Death investigation, Cause of death, Manner of death, Trauma, Injury, Pain and suffering, Medical examiner, Homicide, Survivability, Time of death, Forensic, Coroner, Toxicology, Overdose, Histology, Laboratory Medicine.

...His post-graduate medical education included training at Madigan Army Medical Center, Walter Reed Army Medical Center, National Naval Medical Center, Armed Forces Medical Examiner System, and Office of the Chief Medical Examiner, State of Maryland in Baltimore. His job titles have included Staff Pathologist at Madigan Army Medical Center; Chief of Pathology at Martin Army Community Hospital in Fort Benning Georgia; Deputy Medical Examiner, Regional Medical Examiner, and Director of the Office of the Armed Forces Medical Examiner in the Armed Forces Medical Examiner System. During his military career, he was awarded the “A” Proficiency Designator, Order of Medical Military Merit (O2M3), Defense Meritorious Service Medal, Joint Service Commendation Medal with one oak leaf cluster, Meritorious Service Medal with one oak leaf cluster, and Army Superior Unit Award among others....

Electrical Engineering, Electronics - Microelectronics, Integrated Circuits, Radio Frequency, Optics, Lasers, Electro-optics, optical fibers, Electronic Devices, Antennas, Semiconductors, Semiconductor Manufacturing, Microscopy

...I have professional experience in electronics, circuits, device physics, radio frequency circuits and systems, lasers, optics, fiber optics, embedded coding, semiconductor design, semiconductor manufacturing, internet of things, motor control, and electro-optical systems. I have experience in patent law from the engineering side: I am a co-inventor on more than a dozen patents. have owned the IP portfolio and strategy of one of my startup companies, and provide lectures on patents in my ECE classes. My teaching experience at Rice University includes courses in device physics, circuits, optics, and senior design. The latter course keeps me current in many areas of electrical engineering practice. I have never testified at trial. However, I have won numerous teaching awards at Rice, and I believe I would be persuasive in front of a jury.

HVAC - Carbon Monoxide Poisoning, Site Discovery for Carbon Monoxide Poisoning, Venting Issues Related to CO, Carbon Monoxide Inspections, Ventilation, System Design Flaws, Mechanical Deficiencies, Indoor Air Quality

...He has a Utah State Contractors License 12250871-5501 with classifications S410 and S350 He has worked on 16 cases as an expert witness related to carbon monoxide poisoning due to improper venting, defective equipment, improper service protocols, and installed system deficiencies. Rogers other specialties include: Identifying and solving complex problems related to HVAC mechanical deficiencies, indoor air pollution, HVAC system design flaws, venting issues, and air distribution design inadequacies. His Curriculum Vitae provides insight into his qualifications as an expert witness in the many fields listed. He is: NATE Certified, EPA Certified, an RMGA Certified Technician, RSES-Cosa Carbon Monoxide Certified, HVAC Excellence Certified Carbon Monoxide Inspector, Quality Management System Certified-Chitester Management System, Inc. He works exclusively with legal representation for plaintiffs.

Software Engineering, Computers - Cybersecurity, Software Architecture, Artificial Intelligence, Cryptocurrency / Blockchain, Speech & Face Recognition, ESI Protocol, Social Media Forensics, Biometric Identifiers, Code Review, Patent Infringement ,Trade Secret, IPR, PTAB, Claim Analysis, Forensic Data Extraction, BIPA

...- In addition to his blockchain development experience, he designed the first cryptocurrency arbitrage system....

Construction, Construction Defects

40 years experience in commercial and residential building and remodeling, design/build and project management. Most experienced with interior renovations, office renovations, kitchen and bathroom replacements, room additions, house expansions and egress systems. Completed OSHA training in construction safety and was a trainer for 10 hour and 30 hour classes in construction safety.

Vascular Surgery, Interventional & Vascular Radiology - vascular surgery, hemodialysis access, hemodialysis interventions, critical limb ischemia, deep vein thrombosis, vascular duplex laboratory, limb amputation, aortic aneurysm, claudication, venous insufficiency, venous disease, arterial disease, lymphedema, endovascular interventions, 3D Printing

...Michael Amendola is a practicing vascular surgeon at the Central Virginia VA Health Care System (CVVHS) in Richmond Virginia. He is the Division Chief of Vascular Surgery and the Head of The Vascular Duplex Laboratory. Dr. Amendola obtained his undergraduate and graduate degree in Chemistry from The College of William and Mary in Williamsburg, Virginia. He subsequently worked as a Research Associate for Merck and Company in Rahway, New Jersey utilizing computer aided rational drug design. He then undertook funded research in Department of Genetics at Virginia Commonwealth University School of Medicine (VCU-SOM) In Richmond, Virginia. He started and completing medical school at VCU-SOM in 2002. He completed his general surgery residency and vascular surgery fellowship at Virginia Commonwealth University Health System in Richmond Virginia. He practiced in private practice in Georgia for two years before returning to VCU-SOM and CVVHS practice. Dr....

Security, Premises Liability - Premises Liability, Negligent Security, Violent Crimes, Workplace Violence, Healthcare Security, Guard Services, Risk Assessment, Hospital Security, Incident Reporting, Security Training, Security Systems Design, Active Shooter

Highly credentialed, Board Certified Expert. Michael S. D'Angelo, is the Principal & Lead Consultant for Secure Direction Consulting, LLC. He provides case review, expert testimony and consultation on security standards and best practices in cases involving premises liability, negligent security, and related civil litigation, with a special focus on healthcare security and workplace violence. D'Angelo has been in the public safety and private security industries for nearly 30 years. He retired as a Police Captain with the South Miami Police Department, having served 23 years In a variety of positions; including supervision and senior management. Upon transitioning to the private sector, he was hired as the corporate security leader for Baptist Health South Florida, where he served as an internal consultant for security and emergency preparedness to six hospitals and a multitude of outpatient facilities. He now provides risk assessments, security plans, guard force planning and program...

Products Liability, Warnings & Labels - Injury, Illness, Product Liability, Premises Liability, Industrial Accidents, Warnings and Labels, OSHA, Worker's Compensation, Human Factors, Safe Equipment Design, Respiratory Protection, Respiratory Illness, Chemical Exposures, Dust, Asbestos, Silica, Lead, Temperature Extremes, Laboratory Safety

Expertise in: product design and safety; design of product warnings and labels; chemical exposure risks, analysis, and health outcomes; industrial system design, safety, and training. I am an associate professor of safety engineering and human factors engineering and the Director of the Product and System Safety Laboratory in the Grado Department of Industrial and Systems Engineering at Virginia Tech in Blacksburg, VA. I hold MS and PhD degrees in safety engineering and the certified safety professional (CSP), certified industrial hygienist (CIH), and certified hazardous materials manager (CHMM) credentials. I have over 30 years of experience in the fields of industrial hygiene and safety engineering: conducting investigations and designing safe work systems. I led a compliance organization responsible for conducting investigations and ensuring compliance with safety and health standards (OSHA and EPA)....

Construction Defects, Construction - Forensic investigation, building pathology, failure analysis, technical reporting, construction claims, litigation support, insurance, building code, EIFs, stucco, building envelope, facades, rainscreen, infrared, moisture, structural capability, energy conservation, contract analysis.

...Furlong has 21 years of experience with construction, project coordination and design, remodeling, and field inspections of building systems for residential, and commercial low and high-rise properties. He has successfully completed more than 600 unique and custom projects while as a general contractor. His builder background experience ranges from high-end new custom home construction, interior renovations and additions, to green building and energy efficient homes, historical renovations, timber-framing, and creating elaborate custom interiors in prestigious estate-sized homes. This experience gives Mr. Furlong the unique qualifications to testify as an expert in construction matters. As a professional consultant, Mr. Furlong provides services in the forensic investigation field related to construction defects, Building Code compliance, contract review and analysis, construction delay analysis and investigation....

Construction, Construction Defects - Engineering Design, Building Codes, construction management, structural engineering, infrastructure engineering, reinforced concrete, steel structures, bridges, Structure engineer, foundations, piers, abutments, and soil analysis.

- 45 years construction design and management of commercial and residential projects. - 15 years Construction Expert Witness - 10 years of teaching experience in George Mason University, DeVry University and NVCC - 15 years of mediation and conflict resolution Mohamed Hassan, PhD, PE has 45 years of diversified experience in the construction industry for commercial and residential projects. He is the principal of Hassan Consulting Group, LLC specializing in designing and building a variety of projects. He was an adjunct professor at George Mason University, DeVry University, and Northern Virginia Community College. LICENSES: He is a licensed professional engineer in the states of Virginia and Texas. He is also licensed contractor in the state of Virginia and District of Colombia (Washington DC). He is certified by the Supreme Court of Virginia as a Mediator. He is admitted in Virginia, West Virginia and Washington DC Court Systems....

Family Medicine, Internal Medicine - Diabetes, kidney disease, heart attack, sleep apnea, abnormal labs, failure to diagnose, Lyme Disease, pulmonary embolism, DVT, cancer, sepsis, melanoma, allergic reactions, office systems, medication allergy, pneumonia, headache, disability, drug toxicity, bleeding, blood pressure, stroke

...As a clinician and practice owner Dr Joffee has developed successful office systems designed to deliver excellent care to his patients. As such he is an expert on systems based medical errors in addition to typical primary care subject matter. Dr. Joffee is well regarded by his peers and has been selected by them to be a Washingtonian magazine Top Doctor and Northern Virginia Living magazine Top Doctor in almost every year since 2015. He supervises medical students and is an Assistant Professor of Medical Education at the University of Virginia and a Clinical Instructor for Georgetown University School of Medicine. Dr. Joffee is easy to work worth and always adheres strictly to deadlines. He has an even temperament and answers questions accurately and succinctly under pressure. He has experience with plaintiff cases and disability cases. He is able to provide services for plaintiff and defense firms.

Maritime, Management - newbuilding sea trials, bridge resource management, watchkeeping, watchstanding, navigation, shiphandling, tanker operations, cruise ship operations, quality and safety management systems, ISM Code, ISPS Code, regulations for preventing collisions at sea (“Rules of the Road”), teaching and training

...EXPERIENCE -- Newbuilding sea trials shipmaster (over 100 sea trials in over 50 new ships) -- Operations, health, environment and safety superintendent -- Quality and safety management system lead auditor -- Shipmaster and officer in commercial merchant ships on international and US coastwise voyages -- Appointed shipmaster of a new refined products tanker in US coastwise service, at age thirty -- Served as second mate and chief mate on four maiden voyages, two on new trade routes for the respective shipowners EXPERTISE -- Command in newbuilding sea trials -- Bridge resource management, watchstanding, watchkeeping, navigation, shiphandling -- Petroleum tankship operations -- Tanker Management Self-Assessment 3 (TMSA3) -- Cruise ship operations including operation of their tender boats and rescue boats -- Design, administration and audit of quality management systems, safety management systems, and security management systems -- International Management Code for the Safe Operation...

Mechanical Engineering, Real Estate - plumbing, pipe, re-pipe, leaks, failures, Inspection, construction, water damage, feasibility, epoxy liner, CPVC, Aquatherm, PEX, Galvanized, copper, risk assessment, machinery, insurance, defect, standard of care, Blockchain, smart contract adjudication.

...Technical specialties include plumbing systems (failures, leaks, defects and corrosion), building envelope failures resulting in mold or water damage, Real Estate transactions, mechanical failures due to improper maintenance or operation, Investigation, testing, and report writing. Excellent public speaking skills with the ability to explain complex matters in simple and accessible terms. Knowledgable in recent technologies such as blockchain, digital twin, and digital twin applications for the engineering professions. Experienced in cross border and international engineering practices. Registered professional engineer in California and Washington. Began career working as a mechanical fabricator and design engineer. Recruited by The Northrop Corporation developing composite structures for military aircraft.  Joined Hughes Aircraft Space and Communication Systems, designing precision mechanisms for satellite ejection from an orbiting vehicle. ...

Human Factors, Software Engineering - user interface, user interface design, mobile software, smartphones, software, software engineering, software architecture, virtual reality, augmented reality, GPS, human factors, display design, virtual environments, augmented environments, systems engineering, simulation, software development, UI

...Rosenberg is the founder of Global Technica and is an accomplished human factors engineer, user interface designer, software engineer, and systems engineer with extensive expert witness experience specializing in user interface design and human factors issues for embedded, mobile, web, desktop, and server software. Dr. Rosenberg specializes in software engineering, user interface design, information architecture, user experience, systems engineering, object oriented analysis, complex systems, and modeling and simulation. He has extensive experience in the entire software design and development life cycle applied to a wide range of domains from mobile devices though enterprise class mission critical applications. He has published 21 research papers in professional journals and proceedings relating to user interface design, computer graphics, and the design of spatial, stereo, and auditory displays....

Mechanical Engineering, Equipment & Machinery - Mechanical engineering, industrial process, industrial design, energy modeling, energy control, steam production, fluid transfer, process analysis, heat exchange, piping, pumps

Alan Werner’s skills and background include forensic analysis in the areas of industrial process systems, industrial process equipment including pumps, fans, heat exchangers, mixers, specialty equipment, piping include safety devices, and pipe support systems. Specific experience has been gained in chemical process plants, pulp and paper mills, wood processing plants, boiler plants, chiller plants, and co-gen systems. Using a proprietary thermodynamic model, I am able to replicate boiler and chiller systems to duplicate normal and off-spec operations. I have designed mechanical parts and machinery, some using unusual materials and/or features. I have experience in worker sound exposure investigation and remediation, as well as "fence line" acoustical research. Trained for patent litigation. My professional licenses are in Washington, California, Florida (Ret), and British Columbia (former).

Security, Premises Liability - Healthcare/Hospital Security, Bar/Nightclub Security, Parking Lot Security, Campus Safety, School Security, Negligent Security, CPTED, Crime Prevention, Crime Foreseeability, Use of Force, Security Officers/Guards, Workplace Violence, Security Assessment, Risk Assessment, Security Training/Education

...Drew and security programs he has managed have been recognized with awards including: Mayo Clinic Health Systems' Security Department was awarded the “Program of Distinction” award from the International Association of Healthcare Security and Safety (IAHSS) while under Drew's leadership. Mayo Clinic Health Systems' Security Department was named to Security Magazine’s “Security 500” as one of the top Security programs while under Drew's leadership. Finalist for Campus Safety Magazine’s “Campus Safety Director of the Year”. Security Director News’ “20 under 40 - up and comers in the security industry”. Crisis Prevention Institute’s list of “twelve people who did great work for the common good” for work on violence prevention in healthcare. One of the Top 100 “most often quoted voices in hospital security” as published in Forbes Magazine....

Mechanical Engineering, Equipment & Machinery - Conveyors, Elevators, Material Lifts, Industrial Controls, Dynamic Analysis, Animations, Forensic Engineering, Intellectual Property, Freight Lifts, ASME Safety Standards, Failure Analysis, Hydraulics, Manufacturing, Products Liability, Lifting Systems, Material Handling, Machinery, Patents.

Licensed Professional Engineer with more than 35 years of experience with conveyors, and a wide range of industrial machinery and control systems. conveyor systems, material handling systems, elevators, material lifts, vertical conveyors, shopping cart conveyors (adjacent to escalators), automated car parking systems, custom engineered machinery and systems. Board Certified Forensic Engineer. Chair of ASME B20.1 Safety Standards for Conveyors and Related Equipment, Member of ASME Board on Safety Codes and Standards, member of the National Academy of Forensic Engineers. Engineering specialties include machine design, dynamic system analysis and animation (multi-body physics, motion analysis), hydraulic lifts and systems, heavy mechanical drives for lifting and other material handling applications, finite element analysis. Very active in ASME safety codes and standards.

HVAC - Carbon Monoxide Poisoning, Site Discovery for Carbon Monoxide Poisoning, Venting Issues Related to CO, Carbon Monoxide Inspections, Ventilation, System Design Flaws, Mechanical Deficiencies, Indoor Air Quality

...He has a Utah State Contractors License 12250871-5501 with classifications S410 and S350 He has worked on 16 cases as an expert witness related to carbon monoxide poisoning due to improper venting, defective equipment, improper service protocols, and installed system deficiencies. Rogers other specialties include: Identifying and solving complex problems related to HVAC mechanical deficiencies, indoor air pollution, HVAC system design flaws, venting issues, and air distribution design inadequacies. His Curriculum Vitae provides insight into his qualifications as an expert witness in the many fields listed. He is: NATE Certified, EPA Certified, an RMGA Certified Technician, RSES-Cosa Carbon Monoxide Certified, HVAC Excellence Certified Carbon Monoxide Inspector, Quality Management System Certified-Chitester Management System, Inc. He works exclusively with legal representation for plaintiffs.