13 Mechanical Code/ Standards Analysis Expert Witnesses Found

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Construction Defects, Electrical Engineering - General Construction, Framing, Building Envelope, Waterproofing, Electrical, HVAC, NFPA, Generators, Design, Solar, Fire, Gas, Hybrid Water Heaters, Contract Scope, Cost to Repair, Fire, Industrial Controls, Electrocutions, Shocks, Electrical Fires

...Scerbo's diverse background serves as a well-balanced platform with extensive expertise in Building Envelope, Mechanical, Electrical & Plumbing (MEP) disciplines. He has dedicated his professional career to providing accurate, impartial and credible work, including testimony to support legal proceedings. He serves as a construction consultant and expert for construction defect litigation. Experiences include cost evaluations and coverage determination, project management, construction defect analysis, code and industry standards review and analysis, litigation support, along with consulting and peer review for single family, multifamily, hospitality and commercial construction. Mr. Scerbo serves as an expert witness in many construction-related matters. As a Senior Construction Consultant at Blackstone Global based in Walnut Creek CA, Mr. Scerbo performs construction defect and litigation services with a team of highly qualified experts....

Failure Analysis, Products Liability - Metallurgy, Materials Science, Forensic Engineering, Corrosion, Fatigue, Fracture, Pipe/Tube/PEX/CPVC, Valve, Bolt, Coupling, Boiler, Power Plant, Quality, Weld, Aerial Lift, Hoist, Wire Rope, Fire Protection, Plumbing, Construction Defects

...Anderson is the founder of Advantec Engineering LLC and provides expert consultation, laboratory testing and analysis, and litigation support regarding materials failure analysis, forensic engineering investigations, corrosion, and structural analysis. He has more than forty years of professional engineering experience. Mr. Anderson has provided engineering support and/or testimony for cases involving product liability, industrial accidents and equipment failures, commercial and residential accidents and equipment failures, bridge structures, and aircraft, marine, and vehicle accidents. He has also provided expert testimony and/or litigation support in cases involving flow accelerated corrosion, stress corrosion, corrosion fatigue, pitting, weld defects, and fitness for service of large industrial components, commercial products, and consumer products. Mr....

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation

...Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr. Kiddy is a registered professional engineer in five states, a certified fire and explosion investigator, and an FAA certified drone pilot. Dr. Kiddy's also has substantial experience in intellectual property matters ranging from invention disclosures, patent writing, patent prosecution, and continuing through IP disputes. Dr. Kiddy has been awarded nine U.S. patents and at one time managed a patent portfolio consisting of over 300 U.S. patents. Further, Dr. Kiddy has provided expert services in Inter Partes Reviews and IP litigation. As an expert witness, Dr....

Engineering, Safety - fire, shock, burn, appliance, product, design, test, code, safety, failure, analysis, warning, instruction, literature, product safety, containment, inspection, litigation, product liability, expert

...Qualifications: Registered professional engineer in the state of Michigan Certified fire and explosion investigator (CFEI) Master certified in design for safety Master certified in force failure testing Certified in experimental statistics and statistical process control Member of the UL Standards Technical Panel for appliance codes related to clothes washers and dryers I worked in the consumer goods industry in appliances for over 28 years, which gave me the opportunity to serve on the dryer safety committee for the American Home Appliance Manufacturers (AHAM), as well as work extensively with Underwriters Laboratory ( UL) and CSA. Recognized as a significant knowledge source in the US on dryer fires and their causes, I was instrumental in the development of the clothes dryer drum containment standard recently implemented by all US codes agencies. I am certified to run both the UL and ANSI dryer drum fire containment test as well as the dryer base fire containment test....

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client....

Engineering, Forensic Science - Forensic Engineering, Explosions, Electrical Engineering, Mechanical Engineering, Product Liability, Fires, Fire Protection, Appliances, Construction, Building Defects, Failure Analysis, Laboratories & Testing, Building Defects, Plumbing

Steven Pietropaolo has a Bachelor Degree of Engineering in Electrical Engineering and a Master of Science Degree in Mechanical Engineering from Manhattan College. Mr. Pietropaolo is a Licensed Professional Engineer (P.E.) in the State of New York, amongst many others. He is a Certified Fire and Explosion Investigator, a Certified Fire Investigator Instructor, a Certified Forensic Consultant and Certified Forensic Professional Engineer. He is a Fellow of the American College of Forensic Examiners Institute. He is Board Certified in Forensic Engineering by the National Academy of Forensic Engineers. He has 30+ years of hands on engineering experience including electrical, mechanical, materials, safety, human factors, fire protection, and construction. He has knowledge of codes and standards used in construction and industry including building codes and safety codes....

Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation

...Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr. Kiddy is a registered professional engineer in five states, a certified fire and explosion investigator, and an FAA certified drone pilot. Dr. Kiddy's also has substantial experience in intellectual property matters ranging from invention disclosures, patent writing, patent prosecution, and continuing through IP disputes. Dr. Kiddy has been awarded nine U.S. patents and at one time managed a patent portfolio consisting of over 300 U.S. patents. Further, Dr. Kiddy has provided expert services in Inter Partes Reviews and IP litigation. As an expert witness, Dr....

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client....

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Mechanical Engineering, Equipment & Machinery - Conveyors, Elevators, Material Lifts, Industrial Controls, Dynamic Analysis, Animations, Forensic Engineering, Intellectual Property, Freight Lifts, ASME Safety Standards, Failure Analysis, Hydraulics, Manufacturing, Products Liability, Lifting Systems, Material Handling, Machinery, Patents.

...Chair of ASME B20.1 Safety Standards for Conveyors and Related Equipment, Member of ASME Board on Safety Codes and Standards, member of the National Academy of Forensic Engineers. Engineering specialties include machine design, dynamic system analysis and animation (multi-body physics, motion analysis), hydraulic lifts and systems, heavy mechanical drives for lifting and other material handling applications, finite element analysis. Very active in ASME safety codes and standards.