85 Engineering Education Expert Witnesses Found

Results Sorted Below by State

Frank S Will, PhD Ino8

Alabama
Automotive, Motorcycle - Engine, Motor, Defect, Damage, Failure, Exhaust, Emission, Carbon, Monoxide, NOx, Test, Measure, Defeat Device, Computer, Control, Software, Calibration, Tuning, Performance, Power, Fuel, Economy, Combustion, Leak, Heat, Burn, Fire, Gas, Diesel, Motorcycle, Autocycle, Bike, Bicycle, Battery, Lemon
...His extensive educational experience in academia allows him to help judges and jurors understand the topic they are dealing with. Dr. Will has invented, designed, built, and licenced automotive products such as heat management systems and engine software strategies that reduces emissions and fuel consumption. Therefore, he is also experienced in IP, patent infringement law, and developing claim charts. He has conducted extensive research in the reduction of emissions and improvement of vehicle efficiency, with applications to automotive control systems, and semi-active suspension systems. He is a Fellow of SAE-A, and a recipient of multiple international awards, and holds a PhD in Mechanical Engineering from Deakin University, Australia, an MBA from Henley Management College, UK, the MSc equivalent from University of Siegen, Germany, and a Graduate Certificate in Higher Education from Deakin University....

Al Rose, P.E. Arizona Forensic Engineering Investigations, PLC

Tucson, Arizona
Plumbing, Failure Analysis - Chemical Pipe Expert, Petroleum Pipe Expert, Pipe Failure Expert, Pipe Expert, Piping Expert, Pipe Explosion Expert, Pipeline Failure, Pipe Failure Analysis, Pipe Explosion, Pipeline Failures, Industrial Pipe Expert, Industrial Piping, Oil Piping, Natural Gas Piping, Petroleum Piping, B31.3
*500+ forensic engineering cases, $500 Million+ in cases involving nearly every kind of pipe and tubing found in residential, commercial, and industrial applications *Designed piping in every state in the U.S for over 500 large chemical, petroleum, and wastewater plants *35 years experience in design and failure analysis of pipes *Pipe Explosion Specialist * Customers include Dupont Chemical, Dow Chemical, 3M, BASF, Chevron, Exxon, Shell, Texaco, Amoco, Suncor Oil Sands and Central Arizona Project *Member, ASTM committees on standards development for Stainless and Alloy Tubular Products, Copper and Copper Alloys Pipe and Tube, and Plastic Piping Systems *Lectured at universities and provided continuing education, possessing the ability to explain complex matters in simple terms to students, juries and arbitrators *ASME Certified provider of continuing education in Material Science *Performed thousands of computer simulations and stress analyses including wind and seismic analysis of pipelines...

Justin Hall, MAS, PE Hall Engineering Group, Ltd

Little Rock, Arkansas
Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.
...Justin Hall, PE is a licensed professional engineer providing a broad range of services in forensic engineering to insurance companies and law firms, construction, energy, mining, and technology, engineering and architectural firms, governmental and educational institutions, property owners, builders and individuals. With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi....

John H Hamilton, MSME PE

MOUNTAINBURG, Arkansas
Mechanical Engineering, Safety - Guarding, plastics processing equipment, lockout-tagout (LOTO), Injection molding machines, thermoformers, blow molding machines, intellectual property, Industrial accidents, agricultural accidents, on product warnings, machine design, pumping-piping systems,
...Hamilton, is a professional engineer and a full-time faculty member of the University of Arkansas. In this this faculty position he is responsible for teaching undergraduate mechanical engineering courses. Previously Mr. Hamilton worked as a full-time consulting engineer assisting professionals in both industry and the legal community by serving as a consultant and as an expert witness. As an expert, Mr. Hamilton has evaluated hundreds of consumer, industrial and agricultural incidents related to safety, machine guarding and mechanical engineering. He has worked in industry as a manufacturing and plant engineer and has been responsible for the safety of an industrial plant with over 300 employees, where he designed guards and worked extensively with plastic injection molding machines amongst many other industrial safety responsibilities. Mr. Hamilton is devoted to educating the next generation of engineers....

Morten O Jensen, PhD, DrMed Jexpert LLC

Fayetteville, Arkansas
Medical Devices, Biomedical Engineering - Biomedical Engineering, Medical Engineering, Biomechanics, Medical Equipment, Intellectual Property (IP), Patent Infringement, Inter Partes Review (IPR), Patent Invalidity, Surgery, Medical Malpractice, Medical Instrument, Prosthetic Device, Medical Device, Blood, Medical Electronics, Device Failure
...Jensen’s educational background is from top ranked universities at the interface of engineering and medicine. He has more than two decades of academic and industry experience in both Europe and the US. He worked for six years with a global measurement, automation, and instrumentation provider in the company’s consulting services and business development departments. He has 17 years of faculty member experience at highly renowned universities in Europe and the US, winning numerous prestigious awards for his work with research, teaching, and service. The results from some of his work has been adopted by the FDA guidelines for designing certain medical devices. Dr. Jensen serves on professional society committees and review panels for the NIH, DOD, NSF, etc. He has published 84 peer reviewed scientific articles, incl....

Istvan B. Jonyer, Ph.D. Sidespin Group LLC

Santa Monica, California
Software Engineering, Computers - Telecommunications, wireless, Wi-Fi, wifi, Computer networking, Machine Learning, Neural networks, Deep learning, Smartphone, phone, smart TV, chromecast, Google TV, remote control, universal remote, Roku, Cloud computing, internet computing, web applications, HTML, HTTP, FTP Video streaming, CDN
...Education ------------------------ • Ph.D., Computer Science and Engineering, The University of Texas at Arlington, 2003. • MBA, Carnegie Mellon University. 2010.

Bert Botta, Aviation Expert: General Aviation, Airline/Corporate Captain, ALPA Pro Stds Botta Aviation Expert

Petaluma, California
Aviation & Aerospace, Human Factors - Aviation Crash, Airline & General Aviation, Flight Crew Error, Flight Training, Airplane Crash, Aviation Safety, InFlight Emergency, FAA, Maintenance Negligence, Crash Investigation, Aircraft Safety, Corporate Jet Accidents, Pilot Error, Controlled Flight Into Terrain, Loss of Control, Weather
...• Captain Botta assesses and opines on individuals in a Corporate, Airline, or General Aviation case that may have • Involved pilot error, inter-personal conflict, stress, or other “human factor” related issues • Based on his experience as a former Licensed Professional Counselor • And as a TWA FAA Designated Check Airman • TWA/ALPA & NetJets Professional Standards Committee Chairman • Experience in Aviation Expert Cases involving Aviator Medical Issues and Aircraft Fatal Accidents • Experience with Rebuttal, Written Reports, and Deposition General Specialties: General Aviation, Flight Crew Human Factors, Pilot Judgment, Safety Culture Adherence, Pilot Behavior Analysis, Accident Analysis Education: • Master's Degree, Counseling Psychology, John F Kennedy University, Orinda, CA, 1984 • BA, San Francisco State University, San Francisco, CA, 1964 Aviation Experience: • Airline Pilot/Captain at Trans World Airlines (TWA) 1966-1992 • FAA Designated Check Airman, TWA, 1989-1992...

Christopher M Daft, PhD River Sonic Solutions, LLC

San Francisco, California
Intellectual Property, Medical Devices - Imaging, Patent, Ultrasound, Electronics, Transducer, ASIC, MEMS, FDA, Signal Processing, Neuro modulation, Regulatory, Integrated Circuit, Semiconductors, Biometric security, Ablation, Tomography, Parallel Computing, Surgical Guidance, Wearable Medical Device, Product Liability
Award winning, Oxford Educated scientist whose areas of expertise include medical imaging, electronics, semiconductors, medical devices, sensors, MEMS, signal processing and image processing. Dr Daft has deposition and trial testimony experience including district court, ITC and PTAB matters. Extensive Intellectual Property experience including patent development, analysis, licensing, and litigation. Serial inventor who holds 26 U.S. Patents. Diverse industry experience including multi-nationals such as GE, Medtronic, Fujifilm, Samsung and Siemens as well as several start-ups. Well published. Winner of grants from National Institute of Health. Extensive international consulting experience. IEEE (Institute of Electrical and Electronic Engineers) Senior Member since 2004. Three years’ experience teaching electrical and computer engineering at the University of Illinois....

James F. Davidson, CPA, CFE, CFF, CGMA, CM&AA, CM&AP, CIRA, CTP, CBA Avant Advisory Group

Newport Beach, California
Accounting, Business Operations - Financial, operational turnarounds, restructurings, mergers, acquisitions, CEO, CFO, CRO, governance, forensic, fraud, corporate investigations, certified, turnaround, insolvency, restructuring, CPA, chartered global management accountant, credentialed, fraud examiner, board, best practices
...Consumer products, services; franchising; retail, wholesale distribution; food processing, packaging; restaurants; agribusiness; real estate; engineering, construction; industrial manufacturing, assembly; trucking, transportation; aerospace, defense; waste management; energy – oil & gas, shale, mining; chemicals; fertilizers; lending; dealerships, service, repair; education; telecom, media, technology....

Adam Goodworth, PhD, PE, ACTAR Goodworth Biomechanic & Forensic Consulting

Goleta, California
Biomechanics, Automotive - pregnancy, eye injury, fetus injury, seat belts, fall, trip, brain injury, slip, biomechanics, injury, mechanism, airbag, EDR, event data recorder, accident reconstruction, NASS, CDS, CISS, research, sports, professor, professional engineer, kinesiology
...Goodworth is a Professional Engineer in California (# M40242), an ACTAR Accredited Traffic Accident Reconstructionist (# 2225), trained in EDR interpretation (“black box”), and active in research of restraint systems and occupant kinematics. Dr. Goodworth can perform vehicle Inspections and site investigations in California and across the US. Dr. Goodworth has been a Professor for over 13 years. Currently, a full tenured Professor at Westmont College in Santa Barbara, CA, Dr. Goodworth has over 50 peer-reviewed journal and conference publications. His research has been funded by the National Science Foundation, National Institutes of Health, and Department of Defense. His teaching includes Biomechanics, Causes of Injury, Research, Human Motor Control, Engineering Materials, and Control Systems. Dr. Goodworth takes pride in explaining technical topics in a clear and simple manner with visuals and illustrations....

Jeffrey T Gotro, PhD InnoCentrix, LLC

Rancho Santa Margarita, California
Chemistry & Chemicals, Intellectual Property - Patent Infringement, Inter Partes Review, Polymers & Plastics, Composites, Adhesives and Coatings, , Rheology And Flow, Polymers Used In Electronic Applications, Polymer Materials Selection, Polymer Product Liability, Thermoset Polymers, polymer Processing, Epoxy Chemistry, Polymer Characterization
...Education Ph.D. in Materials Science from Northwestern University (specialty in polymer science) BSME in Mechanical Engineering from Marquette University (specialty in Materials Science) Professional Memberships Forensic Expert Witness Association (FEWA) American Chemical Society (ACS) International Microelectronics Assembly and Packaging Society (IMAPS) Institute of Electrical and Electronics Engineers (IEEE) Society of Plastics Engineers (SPE) Society for the Advancement of Material and Process Engineering (SAMPE) Institute of Management Consultants (IMC)

Joseph Greenfield, PhD Maryman & Associates

Los Angeles, California
Computers, Information Technology - Digital Forensics, Computer Forensics, Electronic Evidence, Electronic Discovery, eDiscovery, Email Analysis, Mobile, Computers, Cybersecurity, Cyber Breach Investigations, Cyber Investigations, Incident Response, DFIR
...Joseph Greenfield is the Vice President and Chief Forensic Examiner at Maryman & Associates and an award-winning educator. He is a renowned computer forensics expert with over 15 years of investigative experience, including cyber breach investigations, employee misconduct, and email recovery and analysis. He has worked over 1000 cases and analyzed over 2000 pieces of digital evidence. His is known for deep forensic analysis while being able to explain technical details to non-technical decision-makers. He has provided expert witness testimony in state, federal, and international legal matters. Dr. Greenfield is also an Associate Professor of Information Technology Practice at the Viterbi School of Engineering at the University of Southern California, where he authored the undergraduate programs in both cybersecurity and digital forensics. In 2014, the Ponemon Institute ranked USC as 6th in the nation for “Best Schools for Cybersecurity” and the highest ranked on the West Coast....

Paul W Jacobs Paul Jacobs Forensic Imaging and Analysis

Sacramento, California
Video, Accident Reconstruction - Visibility, Daytime Visibility, Nighttime Visibility, Visibility Study, Visibility Analysis, Video, Video Analysis, Photography, Photo Analysis, Photogrammetry, Mapping, Visual, Drone, UAV, Aerial, GIS, Animation, Photomodeling, 3D, Audio, Enhancement, Authentication, Lighting, Human Factors
...Paul has attended thousands of hours of seminars, symposiums, classes and training conducted by forensic science organizations, and educational institutions. CASES WORKED: Accidents (cars, truck, tractor trailer, farm machinery and implements of husbandry, bus, cargo, train, vessel, pedestrian, bicycle, motorcycle), Slip, Trip & Fall, Wrongful Death, Police Shootings, Property Damage, Defamation, Personal Injury, Criminal, Civil Rights, Maritime, Train, Product Misrepresentation, Construction Defect, Elder Care, Wildland Fire, Structure Fire, Obstructed View. SERVICE AREA: Services are offered nationwide. Video and photo analysis work can often be completed remotely, without the necessity of a site visit. PRESENTATIONS: Paul provides introductory and advanced technical presentations to law firms and forensic science professional groups. MEMBERSHIPS: Member of the Society of Forensic Engineers and Scientists- SFES.us....

Jeffrey S Kane, Ph.D. Professional Statistical Services

Folsom, California
Statistics, Employment - Statistical analysis,Database analysis & Programming, Mathematical modeling,Management science,Discrimination in hiring/promotion/retention ,Wrongful termination, Compensation/Pay Systems,California Wage & Hour analysis,Performance appraisal,Recruitment, selection, & testing,Survey research/analysis
...., The University of Michigan; M.A. in Industrial Relations, University of Minnesota) with extensive education and experience in the application of statistical and quantitative methods, data analytic computer programming, and all aspects of human resource management and industrial/organizational psychology. Litigation Support: Since 1974, Dr. Kane has been providing litigation support/expert witness services to attorneys for both plaintiffs and defendants....

Ioannis Kanellakopoulos, PhD Oraton Consulting

Redwood City, California
Automotive Engineering, Telecommunications - Automotive Systems, ADAS, Autonomous Vehicles, Self-Driving Cars, Adaptive Cruise Control, Blind Spot Monitoring, Lane Keeping, Automotive Software, Automotive Electronics, Collision Avoidance, Telecommunications, Networking, Carrier Ethernet, DSL, Wi-Fi, 5G, Wireless Transceivers, Telecom Standards
...His extensive educational experience allows him to help judges and jurors understand the topic they are dealing with, instead of confusing them with unnecessary technical details. After all, it takes excellent teaching skills and a deep understanding of a complex technical concept to convey the essence of that concept to non-experts without talking down to them. Dr. Kanellakopoulos has designed and built telecom products such as DSL and Carrier Ethernet hardware and software, has conducted extensive research in adaptive control of nonlinear systems, with applications to automotive control systems, specifically driver assistance systems and active suspension systems. He is a Fellow of the IEEE, and a recipient of multiple international awards, and holds a PhD in Electrical Engineering from the University of Illinois at Urbana-Champaign.

Bhaskar Kura, PhD, PE i2Care, Inc.

California
Environmental Engineering, Environmental - Air Quality Modeling, Indoor Air Quality, Hazardous Air Pollutants, Public Health, Cancer Risk, Worker Health, Pollution, Pollution Prevention, Hazardous Waste, Solid Waste, Medical Waste, Exposure Assessment, Emissions Modeling, Water Pollution, Green House Gas Emissions, Dispersion Modeling.
...Bhaskar Kura is a higher education leader and has 35 years of professional experience as a professor, researcher, and scientist in the filed of environmental engineering. Over the years, he worked in industry, consulting, and academia. He is a registered Professional Environmental Engineer in the State of Louisiana. He published more than 100 technical articles and supervised graduate students for their MS and PhD degrees....

Sam Malek, PhD Cyberonix

Irvine, California
Software Engineering, Internet - Computer Science, Software Development, Mobile Software, Android, Java, Internet, Web, Distributed Systems, Software Architecture, Operating System, Database, Cloud Computing, Software Security, Artificial Intelligence, Machine Learning, Information Technology, Internet of Things, Embedded Systems
Highlights - Professor of Software Engineering, University of California, Irvine - 20+ years of experience in academia and industry - 50+ prior engagements in software-related litigation matters - 40+ prior testimonies in trials and depositions - Renowned author of 120+ peer-reviewed publications Formal Education - PhD, Computer Science, University of Southern California, 2007 - MS, Computer Science, University of Southern California, 2004 - BS, Information and Computer Science, University of California, Irvine, 2000 Academic Experience Sam Malek is a Software Engineering Professor in the Informatics Department within the School of Information and Computer Sciences at the University of California, Irvine. His research is in the field of software engineering, and to date his focus has spanned the areas of software design and architecture, distributed and embedded systems, smartphone and mobile computing, internet and web technologies, and software dependability and security....

L Fredrick Nolta Nolta Consulting

San Diego, California
Construction, Construction Defects - Construction Claim, Construction Engineering Contractor, Construction Cost, Construction Schedule, Construction Accident, Construction Management, Construction GC, Concrete Contractor, Concrete, Steel Construction, Construction Hospital, Construction Public Works, Construction Indian Gaming & Hotels
...Construction Engineer with 40 + years of continuous construction experience as a general, sub and concrete contractor. Career positions progressing from: laborer, field engineer, superintendent, estimator, project manager, project executive to principal. Licensed contractor with classifications in: “A” Engineering, “B” Building & “C-8” Concrete. Product Type Experience: Residential, commercial, health care, education, light industrial, military, public works, and site development including: offices, retail, restaurants, food service, multifamily high-rise, apartments, condos, hospitals, medical office buildings (MOB), hotels, schools, stadium, theater, parking, power / co-generation, waste water treatment, zoos, Indian gaming and casinos. Concrete Expertise: High-rise (to 51 floors), slip form, jump form, tilt-up, precast, pre-stressed, post tension slab, mat slab, caisson, underpinning, shoring and foundation....

Joseph Quinn, M.S., P.E. Materials FACT

Los Angeles, California
Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle,Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe, HVAC, CPVC, Oil & Gas, Welding
Joseph Quinn, MS, PE, is a Forensic Metallurgy and Metallurgical Engineering consultant. He is a Licensed Professional Engineer in Metallurgical Engineering and is registered in 7 states (CA, PA, UT, NV, AZ, CO, WA). He has provided over 1,000 Failure Analysis investigations on metallic and non-metallic (glass, plastic, rubber, and composite) materials or products. Mr. Quinn provides metallurgical and materials consultation, expert witness testimony, and forensic failure analysis for civil litigation with retentions by defendants and plaintiffs. He has received awards in the International Metallographic Contest and has conducted several presentations on metallurgical engineering and failure analysis subjects at universities, ASM meetings, and industry events. He is President of the National Society of Professional Engineers in California (NSPE-CA) and is active in several technical societies....

Daniel R Robles, PE, MBA Community Engineering Services, PLLC

California
Mechanical Engineering, Real Estate - plumbing, pipe, re-pipe, leaks, failures, Inspection, construction, water damage, feasibility, epoxy liner, CPVC, Aquatherm, PEX, Galvanized, copper, risk assessment, machinery, insurance, defect, standard of care, Blockchain, smart contract adjudication.
Thirty-five years of practical engineering experience across the aerospace, building construction, and technology industries. Bachelors of Science in Mechanical Engineering and Masters degree in International Business Administration. Expert Witness at the intersection of mechanical engineering, business practices, and standard of care.  Technical specialties include plumbing systems (failures, leaks, defects and corrosion), building envelope failures resulting in mold or water damage, Real Estate transactions, mechanical failures due to improper maintenance or operation, Investigation, testing, and report writing. Excellent public speaking skills with the ability to explain complex matters in simple and accessible terms. Knowledgable in recent technologies such as blockchain, digital twin, and digital twin applications for the engineering professions. Experienced in cross border and international engineering practices....

Bert Schiettecatte, MSc/CS, MA/MST Noisetron LLC

Los Angeles, California
Software Engineering, Electronics - audio, video, Digital Signal Processing (Dsp), source code review, patent, copyright, wireless, sensors, user interface, linux, operating systems, open source, electronics, hardware, embedded systems, firmware, computer graphics, computer vision, smart devices, network protocols, USB, C/C++, IoT
...* Over 20 years of computer science, software and hardware engineering experience, including hands-on experience developing software in languages such as Perl, C, C++, java, javascript, php, ... * Experience with server, desktop, embedded and mobile software and embedded systems and firmware. * Experience developing proprietary trading software and strategies for the crypto and futures markets. Experience as an algorithmic trader. * Experience with operating systems such as Windows, Mac OSX and Linux. * Designed, developed and engineered the hardware and software of multiple successful consumer electronics audio and wireless products, sold worldwide. * Academic researcher and teaching assistant at Leuven Catholic University (KUL) and Brussels Free University (VUB), writing and publishing papers on audio signal processing and human-computer interaction research topics, presenting papers at international conferences and teaching students....

Richard K Skala, DC

Paradise, California
Chiropractic, Disability Evaluation - manipulation and stroke, Cervical adjustment stroke, disc injury and chiropractic adjustment, stroke, death, permanent disability and chiropractic manipulation, neck, vertebrobasilar stroke, disability
Education: Chiropractic School: Palmer College of Chiropractic Davenport, IA Doctor of Chiropractic Degree 1972 - 1976 Postgraduate: Diplomate National Board of Chiropractic Examiners 1976 California Chiropractic Association Certified Disability Evaluator Course 300 Hours 1990 California Chiropractic Association Qualified Medical Evaluator Course 300 Hours 1992 Academy of Applied Spinal Biomechanical Engineering Spinal Biomechanics Course & Fellow Exam 300 Hours 1988 University of Florida School of Medicine Spinal Musculo-Skeletal Rehabilitation Certification Gainesville, FL 200 hours & Certification Exam 1989 AMA Spinal Impairment Rater Medical Legal Consultants Association Clearwater, FL Certification 1994 AMA Impairment Rater 5th Edition Academy of Forensic Chiropractic Consultants Redondo Beach, CA 2004 Manipulation Under Anesthesia California Academy of MUA Certified MUA 2002 Neuro Electrodiagnostic Certification Program Palmer College of Chiropractic 150 Hours...

Barry Taheri California Consultants

Long Beach, California
Construction Defects, Construction Engineering - Waterproofing, Building Envelope, Windows and Doors, Leak Investigation, building Enclosure, Below Grade, Above Grade, Roof, Planters, Construction Standard Of Care, Water Damage
.... • Technical presenter to the Stucco Manufacturer’s Association (SMA) • Technical Advisor and Forensic Investigator to the leading environmental engineering firm: Terra Petra • ASTM Member & Official Voting Committee Member of E06, Performance of Buildings Education and Certification: Accredited Architectural School Waterproofing Consultant-(USC) State of California License, B 904491 DuPont Envelope Certification number; DWSRC 1082 Solving Mold Training Certificate Solving Moisture Training Certificate State of CA Weatherization Training Certificate State of CA Certification CAS, (Combustible Appliance Safety) State of CA Certification Shell and Sealing (Envelope/Enclosure/HVAC) State of CA Certification Blower Door Testing EPA Lead Safe remodeler Hinkle Corp approved CIM Industries approved Tremco approved Government designated industry expert (CA) IIBEC Certificate in Stucco Detailing for Buildings with Unique Geometry

Frank S Will, PhD Ino8

Los Gatos , California
Automotive, Motorcycle - Engine, Motor, Defect, Damage, Failure, Exhaust, Emission, Carbon, Monoxide, NOx, Test, Measure, Defeat Device, Computer, Control, Software, Calibration, Tuning, Performance, Power, Fuel, Economy, Combustion, Leak, Heat, Burn, Fire, Gas, Diesel, Motorcycle, Autocycle, Bike, Bicycle, Battery, Lemon
...His extensive educational experience in academia allows him to help judges and jurors understand the topic they are dealing with. Dr. Will has invented, designed, built, and licenced automotive products such as heat management systems and engine software strategies that reduces emissions and fuel consumption. Therefore, he is also experienced in IP, patent infringement law, and developing claim charts. He has conducted extensive research in the reduction of emissions and improvement of vehicle efficiency, with applications to automotive control systems, and semi-active suspension systems. He is a Fellow of SAE-A, and a recipient of multiple international awards, and holds a PhD in Mechanical Engineering from Deakin University, Australia, an MBA from Henley Management College, UK, the MSc equivalent from University of Siegen, Germany, and a Graduate Certificate in Higher Education from Deakin University....

AARON JAMES FORUM Aaron Forum LLC

Denver, Colorado
Firearms & Ballistics, Business Operations - Firearms, inherent design flaw, gun holsters, ammunition, ballistics, firearms training, gun sales, gun ranges, gun rentals, gun range safety, risk management
...While I have not completed formal education, I do have a certificate of completion from the Stanford Graduate School of Business, “Stanford Ignite,” for completing MBA level coursework at an accelerated pace. Of a class of approximately 40 students, I was one of only two non-degreed students allowed entry, as the prerequisites included an undergraduate degree. Possessing over 10 years of military experience, I was fortunate to have served within some of the highest levels of Special Operations. US Army Green Berets are considered the US Department of Defense's premier military training and indigenous force multiplier. Master's of unconventional warfare, US Army Special Forces operate in some of the harshest environments in the world. As a member of this elite unit, I engaged in training military units in Bangladesh, South Korea, Afghanistan, and the Philippines....

Mark A McFarland, PE Discovery Engineering

Boulder, Colorado
Electrical Engineering, Telecommunications - electrocution, electronics, networks, wireless, cellular, 5G, GPS, radar, LTE, cell phones, cell towers, base stations, SMS, quality sciences, applied research, RF, interference, radio, satellite, Internet, control systems, instrumentation, appliances, rfid, mobile, software, licenses
Mark McFarland, PE, DFE, is a licensed and Board certified electrical and telecommunications engineer. He provides expert consulting for plaintiff and defense counsel on civil and criminal cases nationwide. Mark's practice covers a wide range of cases, typically involving electrical, electronic, software, cellular, GPS, and telecommunications evidence. He has worked with lawyers in several fields including: wrongful death, personal injury, product liability, securities fraud, homicide, sex trafficking, medical malpractice, class action, insurance claims, patent litigation, contract disputes, and more. Mark has worked dozens of cases and has testified in court for civil and criminal trials. Many of the cases he's worked have settled on his expert report. Contact Mark at Discovery Engineering when you have litigation involving electrical, electronic, cellular, or GPS evidence. Licensed & Board Certified. 720-593-1640 Please call or visit my website for more information....

Lisa A. Fedick, CAE Wonderland of Ice Associates, Inc

Orange, Connecticut
Athletics & Recreation, Risk Management - Ice Arena / Ice Rink Best Practices, Ice Arena / Ice Rink Operations, Ice Arena / Ice Rink Risk Management, Ice Skating Slip and Fall, Ice Skating Accidents, Ice Arena / Ice Rink Design and Safety, Ice Sport Facility Management, Ice Skating Program Administration and Technical Ice Skating
...After earning a degree in Chemical Engineering from the University of Connecticut, Lisa Fedick’s career in rink management began in 1989, with her company, the Wonderland of Ice Associates, Inc, being awarded the long-term lease of the Wonderland of Ice in Bridgeport, Connecticut. Lisa continues to be part of all aspects of the day to day business operations, including management, operations, programming, risk management, retail and food and beverage. The Wonderland of Ice was part of one of the first public / private ice arena privatization arrangements in the country. Lisa’s ice arena has since been expanded to include a second NHL surface, as well as a dedicated curling rink. Through the planning and design of Lisa’s creation, the business footprint has increased by 600%. Lisa has also recently acquired a second arena in Norwich, Connecticut and a synthetic ice facility in Westbrook, Connecticut....

Steven G. Kline Pixel Analysis, LLC

Trumbull, Connecticut
Video, Photography & Imaging - Forensic Video Analysis, Image Clarification, Security Video, Surveillance Video, Cell Phone Video, Photogrammetry, Reverse Projection, Video Production, Day in the Life Video, Drone Video & Drone Photography, Digital Media, 3D Representation & 3D Graphics
Steve Kline has worked as a video and digital media professional since 1994, dealing with encoding, audio and video engineering, production, multimedia and 2D/3D graphics, and live streaming technologies. This has laid a strong foundation and natural bridge for his work in Video & Audio Forensics. Steve began aiding police, lawyers, and private security firms in 1996 - adding video expertise in armed robbery, hit and run, and homicide cases. In 2007 Steve worked CT's last Death Penalty case which started a long working relationship with the CT State Attorney's Office. Since 2007, Steve has worked on dozens homicide cases, processing video for both investigations and prosecutions. Through this work, he gained respect from both sides of the case, being hired by defense attorneys for some of their subsequent cases. Steve prides himself on finding hidden information that many overlook....

Carl Berkowitz, PhD, PE Forensic Engineering Institute

Delray Beach, Florida
Transportation, Safety - Slip Trip & Fall, Pedestrian & Bicycle Safety, Railroad Safety, Bus Safety, Biomechanics & Human Factors, FELA & OSHA, Elevators & Escalators, Traffic Engineering, Transportation Engineering, Transportation Safety, Transportation Rules & Regulations, Transportation Expert Witness
...Berkowitz has extensive multi-modal experience in planning, design, engineering, safety, security, construction, maintenance, operations and management. Dr. Berkowitz has written and edited numerous reports, studies, articles and columns for major publications, journals, newspapers and scholarly periodicals....

Gregory J Cahanin, CP Cahanin Fire & Code Consulting

St. Petersburg, Florida
Fire, Failure Analysis - Kitchen Fire Suppression Systems, Fire Sprinkler System Failure, CPVC sprinkler pipe failure, Fire Walls, Life Safety Egress, Fire Codes, Fire Hazard Analysis, Explosion Analysis and Cause, Fire Alarms, Walking Surface Slip Trip & Fall, Fire Origin and Cause Investigation, Fire Construction Defects
...Cahanin was a Senior Life Safety Engineer. Primary responsibilities were in support of Life Safety Code development and education. He was staff liaison for building construction standards and the Fire Prevention Code. Special project work included support of the International Division of NFPA in a survey of fire protection for all oil production facilities of LaGoven SA in Venezuela; an evaluation of the existing airport terminal in Rio De Janeiro, Brazil; and a code comparison study for the National Institute of Building Sciences. Multiple fatality fire investigations while with NFPA were performed with findings nationally published and peer reviewed. Mr. Cahanin has a Certified Paralegal designatiion from the National Association of Legal Assistants. While he does not work as a paralegal, the designation is an indication of his dedication to understanding the how, why and when of litigation and how his work integrates into a legal case as a part of the team.

Richard W Carr, PhD, CDS R W Carr, Inc.

Jacksonville, Florida
Transportation, Safety - FMCSA, FMCSR, DOT, OSHA, Tank Truck, Loading, Unloading, Forklifts, Driver Qualifications, Drug & Alcohol, Hours of Service, Hazardous Materials, Training, Standard of Care, Vehicle Inspection, Fleet Safety, Commercial Drivers, CDL, Driver Hiring Standards, Record Retention, ELD, Cargo, Accidents
...Here he established and managed the corporation’s Safety, Training and Risk Management and Claims Departments with a staff of 20+ professional Safety Engineers and trainers, 5 licensed claims adjusters and 8 clerical staff members. He has specialized training from the U.S. DOT, Office of Motor Carrier Safety, Environmental Protection Agency, Penn State University, OSHA, Northwestern University, Purdue University, Georgia Tech, and University of South Florida to name a few. In April 1995, he was one of 200 North American Safety Experts invited to participate in President Clinton’s 1994 Tank & Bus Safety Summit held in Kansas City, Missouri, to develop and propose new safety legislation. In April of 1995, the National Tank Truck Association honored him for his achievements in safety....

Thomas Collier, Jr Collier Consultants

Florida
Construction, Premises Liability - Defects, personal injury, insurance, codes, commercial, residential, accidents, falls, asbestos, ADA, sewer, water, liability, damages, general contractor, fire, flood, contracts, subcontractors, engineer
...Education: University of North Carolina at Chapel Hill - Economics and English, Summa Cum Laude Johnston Scholar, Phi Beta Kappa - 1983. Thesis on Disintermediation and Economic Cycles received Highest Honors The Westminster Schools – 1979. Cum Laude, recipient of Special Award for Service, awarded only in select years....

Gary L Deel, PhD, JD, MS, MA FC Consulting & Expert Witness

Windermere, Florida
Hotel & Restaurant, Travel & Tourism - Business, Hospitality, Travel, Tourism, Employment, Human Resources, Safety, Security, Resorts, Lodging, Airlines, Cruise Lines, Meetings, Conventions, Conferences
...Deel's industry experience, he has also spent ten years working in higher education at various institutions, including Valencia College, UNLV, CTU, Kaplan, The Art Institutes, UCF, APUS, and CSU Global. Dr. Deel has developed and taught courses in business, management, hospitality, leadership and ethics, sales and marketing, professionalism, law, human resources, engineering, security, risk management, and other areas. He currently serves as Faculty Director for APUS where he supervises a team of 40+ professors teaching courses in the School of Business. Dr. Deel has also earned several professional licenses and credentials. He is licensed to practice law in Florida and Nevada, and he has been credentialed as a Certified Lodging Security Director (CLSD)*, Certified Hospitality Sales Professional (CHSP)*, Certified Hotel Sales Executive (CHSE), Certified Hospitality Educator (CHE)*, and Certified Hospitality Industry Analyst (CHIA). *certification expired

Rossana Diaz, PE, SI m2e Consulting Engineers

Miami, Florida
Structural Engineering, Failure Analysis
...Diaz has more than 10 years of experience providing structural engineering design, construction administration, and forensic services to private-sector clients on a wide range of projects. As a forensic engineer, Rossana investigates structural failures, building construction defects, and code compliance on behalf of attorneys, and insurance companies. Rossana’s design portfolio includes development, from conceptual design and plan preparation through construction and final inspection. Her areas of expertise include building castin-place concrete, steel, masonry, and timber design for commercial and residential structures, educational and hospitality facilities, marinas, and industrial plants.

Scott Harvey-Lewis, PE, LEED AP Building Mavens

Palm Beach Gardens, Florida
Structural Engineering, Construction Defects - Building Inspection, construction, civil engineering, milestone inspections, structural integrity inspections, Building Enclosures, Exterior Walls and Cladding Systems, Waterproofing Systems, Roofing Systems, Water Intrusion Investigations
...Harvey-Lewis has more than 17 years of experience providing structural engineering design, construction administration, and forensic services to public and private-sector clients on various projects. As a forensic engineer, Scott investigates structural failures, building construction defects, and code compliance on behalf of attorneys, owners, developers, and insurance companies. Scott’s design portfolio includes significant phases of project development, from conceptual design and plan preparation through construction and final inspection. His expertise includes building envelope systems, cast-in-place concrete, steel, masonry, and timber design for commercial and residential structures, telecommunication and educational facilities, marinas, industrial plants, warehouses, storage and containment, and land development.

Joseph (Jay) H McIsaac, III, MD, MS, MBA, CPE, NACD.DC, FASA McIsaac Consulting, LLC

Port St. Lucie, Florida
Anesthesiology, Pediatric Anesthesiology - Patient Safety, Trauma, Coagulopathy, BioEngineering, Cardiovascular, Monitoring, CBRN, Airway, Disasters, Quality, Hemorrhage, Massive Transfusion, Technology, Risk and Crisis Management, Temperature and Hypothermia Reduction, Resuscitation, Non-OR Anesthesia, Pediatric Anesthesia, Risk Reduction.
...Masters in biomedical engineering; MBA; Certified Physician Executive; Certified Corporate Director; Author, Educator, Inventor, and Disaster preparedness expert. Able to cross multiple domains and explain complex topics in plain language to a layman. Two books, 67 chapters, articles, editorials, and other publications. A well-known speaker at national and international professional meetings. He has presented and done simulation training at many medical, engineering, security, and banking conferences. Chief of Trauma Anesthesia at Hartford Hospital (Level 1) and Trauma Liaison at the UConn Health Center. He will be transitioning to independent medical practice in February 2024 with a more flexible schedule. Presently serving on two international boards of directors: The Trauma Anesthesiology Society (Co-founder) and the World Association for Disaster and Emergency Medicine. Dr. McIsaac is an innovator and master educator....

Errold F Moody, PhD MBA MSFP LLB BSCE EF Moody PhD MBA BSCE LLB MSFP

CRYSTAL RIVER, Florida
Securities & Investments, Risk Management - FINANCIAL PLANNING, SUITABILITY, BEST INTERESTS, PRUDENT MAN, FIDUCIARY BREACH, ARBITRATION, FEES, COMMISSIONS, ECONOMICS, INSURANCE, RISK OF LOSS, FINRA, ERISA, SEC/STATE LICENSING, REGULATORY INCOMPETENCE, CFP, RIA, SSRN, ChFC, CPA
AND NOW FOR SOMETHING COMPLETELY DIFFERENT ​PhD- Real Estate; MBA- Business; MSFP- Financial Planning; LLB- Law; BSCE- Civil engineering. No Nonsense Finance- 2003. reprinted 2009; Financial Planning Fiduciary Standards under Dodd Frank, 2011; The Failure of Securities Arbitration, 2012; Investments/Securities Risk of Loss, 2023, online at EMoody.com. 52 years in the trenches as Financial Planner, Held 7, 24, 27, 63, 65 licenses, CFP, RIA, Real Estate Broker; B-1 General Contractor, California Life and Disability Insurance Analyst (i of 35); Have acted as arbitrator, expert witness. Current focus as Consultant. Taught CFP/Financial Planning courses for University of California, Irvine and Berkeley, University of San Francisco, et al; Real Estate Capstone course for UCI, Taught series 4, 6, 24, 27, 63, 65, etc. for Private schools....

Nicholas Strachan, PE Vilano Consulting, LLC

Lake Worth, Florida
Electrical Engineering, Construction Defects - Construction Defects of Electrical, Fire Alarm, Lighting, and Telecommunications Systems in Commercial and Residential buildings, including Condominiums, Laboratories, Museums, Office Towers, and University Campuses
**Providing Electrical Engineering Expert Witness services in Arizona, California, and New York only** Nicholas Strachan is a licensed Professional Engineer (Electrical) in Arizona, California, and New York, and a licensed Plans Examiner in Florida. He has over 25 years of experience in engineering design and quality assurance inspections of electrical systems for construction projects in the US and abroad. These projects included commercial and residential structures, laboratories and higher educational facilities, museums and cultural facilities, and sports arenas. His technical knowledge and experience are predominantly focused on electrical, fire alarm, lighting, and telecommunication systems’ design in new and existing buildings. Nicholas has more recently provided Expert Witness testimony and construction litigation support.

Thomas Collier, Jr Collier Consultants

Atlanta, Georgia
Construction, Premises Liability - Defects, personal injury, insurance, codes, commercial, residential, accidents, falls, asbestos, ADA, sewer, water, liability, damages, general contractor, fire, flood, contracts, subcontractors, engineer
...Education: University of North Carolina at Chapel Hill - Economics and English, Summa Cum Laude Johnston Scholar, Phi Beta Kappa - 1983. Thesis on Disintermediation and Economic Cycles received Highest Honors The Westminster Schools – 1979. Cum Laude, recipient of Special Award for Service, awarded only in select years....

Bruce Fredrics, BSM.h, GA-BC, RGA (EGA), CrtGA, CGA, GMGA, MPA, ICEP, AIC, PPIA, ACA, CACP, CCA U. S. Accredited Expert - Claims & Appraisals

McDonough, Georgia
Insurance, Appraisal & Valuation - Insurance Claims, Insurance Process, Procedure, Standards, Practices, Protocols, Insurance Appraisal and Umpire, Property and Casualty General Adjuster masterclass, Public and Independent Adjuster, Arbitration, State and Federal Court Qualified Expert, Rule 26, Property Claims
...Conduct Jury Education in live court-room testimony, and in Federal Reports, Deposition, and Affidavit....

Stephen (Steve) T. Hopper, PE Inviscid Consulting

Canton, Georgia
Business Operations, Engineering - supply chain, warehouse, warehousing, distribution, logistics, material handling, productivity, automation, industrial engineering, warehouse management system, ecommerce fulfillment, capacity, WMS, TMS, warehouse accident, layout, material flow, labor, safety, software selection, inventory control
...Steve earned a Bachelor of Industrial Engineering (BIE) degree from The Georgia Institute of Technology (Georgia Tech) and is a board-certified, licensed, registered Professional Engineer (PE). He is past president of both the Atlanta chapter of the Institute of Industrial & Systems Engineers (IISE) and the Atlanta chapter of the Warehousing Education & Research Council (WERC). Steve has served as an expert witness for litigation support on more than two dozen cases involving supply chain operations in the US, Canada, and Australia. Steve has advised private-equity and venture-capital firms on their investments in supply chain-related businesses. He has occasionally been interviewed by the supply chain industry media, authored articles for industry publications, and spoken at industry events. Download Steve's full curriculum vitae (CV) through the link shown above.

Chuck Miller Chuck Miller Consulting LLC

Boise, Idaho
Construction, Construction Defects - Construction contracts, construction scheduling, construction estimating, construction project management, International Building Code, code compliance, industry standards, energy efficient building, high performance home building, land development, contractor registration, contractor licensing
Chuck Miller has 50+ years of construction industry experience, has invested in professional education, and has extensive training in alternative dispute resolution, As a result, Chuck has the knowledge and ability to be a convincing construction industry specialist when serving as a professional witness and/or providing expert testimony during a dispute hearing. Chuck's Construction Industry Experience includes: Apprentice Carpenter - Hellman Construction - 1968 to 1970 Journeyman Carpenter / Carpenter Foreman - Ziola Construction Inc., Oak Lawn, IL -1970 to 1972 Journeyman Carpenter / Carpenter Foreman - Southwest Carpentry Inc....

Randy P Wall, PE, MPA Professional Engineering Services

Boise, Idaho
Civil Engineering, Construction Engineering - Right-of-Way, Grading & Drainage, Hillside Homes, Due Diligence, Inverse Condemnation, Construction Defects, Wood Engineering, High-end Homes, Eminent Domain, Residential Structural, Land Use & Zoning, Permitting & Entitlements, Road & Highway Design, Land Use Planning, Local Government, Forensics
...Wall possesses the ideal skill set for Expert Witness work, grounded in his pursuit of lifelong learning, business acumen, Civil Engineering practice, graduate level forensic research and writing, and entrepreneurial mastery. This superlative skill set gives Mr. Wall the ability to write high impact Expert Reports and provide expert testimony that explains complex concepts in plain easy to understand language that settles cases. Mr. Wall serves as an Expert Witness, Forensic Engineer, and Consulting Engineer for the Civil and Structural Engineering, Land Planning, and Construction industries. As a Professional Civil Engineer and Educator, Mr. Wall utilizes his experience to provide high quality professional consulting services....

Randy P. Wall, PE, MPA Professional Engineering Services

Boise, Idaho
Snow Sports Safety, Risk Management - Ski School Race Team standard of care,lessons & accidents,class management,collisions,on-hill group supervision,situational safety,signs,signage,event investigation,ANSI B-77, ASTM F24,ASTM F27,F29-22,padding,rope lines, flagging,operational risk management,expert reports,claims,litigation support
...As a Certified Ski Instructor and leader in the Professional Ski Instructors of America (PSIA), and Professional Engineer, Mr. Wall specializes in opining on issues arising from on-hill group activities including group and private ski lessons, ski and snowsports schools, and race team operations. These services include forensic analysis and expert witness for on-hill group supervision, situational safety, program components, facility conditions, standard-of-care, negligence, duty, breach, causation, and harm, litigation support; and expert testimony. Mr. Wall has been a Board Member, Divisional Chairman, Examiner and Clinician for multiple PSIA Regions, is currently the Owner and Principal of an expert witness, forensic analysis, Civil Engineering, and Land Planning firm, and an education firm that provides professional development by teaching professional, organizational, and soft skills. Mr....

Adam Birchfield, CSP, CHST A & A Safety Consulting

Hanover, Indiana
Safety - Fall Protection, EM385-1.1, OSHA and ANSI Standards, Scaffolds, Accident Investigation, General Contractor requirements , Crane Accidents, Steel Erection, Multi-employer Worksites, Excavations & Trenching, Slips, trips, and Falls, Effective Safety training, failure to train, and Inadequate training
...My career spans roles as a Safety Specialist with the US Army Corps of Engineers, where I managed safety program elements, conducted hazard assessments, and provided critical training to personnel at all levels. Contributions also extend to the EM385.1.1 update for the Army Corps of Engineers Headquarters, highlighting my technical decision-making abilities and leadership skills....

KURT E GLEASON Rock Management Services, LLC

RAMSEY, Indiana
Blasting and Explosives, Mining - Construction, Mining, Blasting, Explosives, Drilling,
PROFESSION: Mining/Construction Blasting; Explosive Engineering; Blasting Consulting; Claims Investigation; Expert Witness EDUCATION: BS Construction Engineering (Civil) 1985, Purdue University Associates in Applied Science Building Construction Technology 1983, Purdue University LICENSES/PERMITS: ATF License Number (18 U.S.C....

Makarand (Mark) Hastak, PhD, PE, CCP, CRIS Hastak Consulting Services, LLC

Indianapolis, Indiana
Construction, Civil Engineering - Construction Engineering, Construction Management, Cost Overruns, Schedule Delays, Construction Safety, Modular Construction, Factory Built Construction, Infrastructure Planning, Data Center Construction, project risk management, Disaster Recovery, Disaster Mitigation, Trade Secret Misappropriation
...Hastak is Professor and the Dernlan Family Head of Construction Engineering and Management as well as Professor of Civil Engineering at Purdue University. He is also an Honorary Distinguished Visiting Professor at Tsinghua University in China. Dr. Hastak has assisted the construction industry for the past 33 years through consulting, research, teaching, and service to the community. Prof. Hastak is recognized around the world as an expert in the area of construction engineering and management with specific expertise in profitability of construction companies, disaster risk reduction, infrastructure management, project control, and risk management. He is a licensed Professional Engineer (PE), a Construction Risk Insurance Specialist (CRIS), and a Certified Cost Professional (CCP). Prof. Hastak has worked on numerous projects sponsored by the NSF, State DOTs, City Agencies, and the Construction Industry Institute (CII)....

Ronald Barrett Barrett Aerospace Technologies

Lawrence, Kansas
Aviation & Aerospace, Engineering - Aerospace, Aviation, Engineering, Aircraft Design, Aerodynamics, Structures, Smart Structures, Stability and Control, Propulsion, UAV, UAM and UAS, Drone, Missile, Munition, Helicopter, Electric Flight, Flying Toys, Flight Testing, Aircraft Crashworthiness, Cost Analysis, Patents
I am a Full Professor of Aerospace Engineering at the University of Kansas (KU) and Director of the Aircraft Design Laboratory (ADL). When not working for the university, I run a small business, Barrett Aerospace Technologies, which is typically centered on transitioning KU technologies to the commercial world. • Winner of the Discover Magazine Award for Aerospace and Aviation • Led more award winning American Institute of Aeronautics and Astronautics (AIAA) Aircraft and Missile Design teams than any other in the world • Associate Fellow, AIAA • Listed by Stanford/Elsevier as one of the world’s top 2% most cited Technologists • Most cited member of the AIAA Aircraft Design Technical Committee • Published more than 400 professional works • Holder of 20 patents • Worked on projects for all of the branches of the US DoD, NASA, NSF, DARPA, all major US aerospace corporations and many minor....

William J. Kirkham, P.E., S.E., Ph.D. APT Engineering LLC

Eudora, Kansas
Structural Engineering, Construction Defects - Codes, Concrete Failures, Steel Failures, Masonry Failures, Wood Failures, Corrosion, Seismic Design, Wind Design, Partial/Full Collapse, Prestressed Concrete, Post-tensioned Concrete, Facade performance, Cladding Failures, Vibration, Timber Construction, Timber Decay, Wood Decay, Tall Buildings
As an engineer, I am fascinated by complexity and understanding new and different situations. I love to talk about engineering and explaining engineering processes and principles to young engineers and lay persons is personal passion. Examining a structural failure brings out my inner researcher, and explaining the cause and physics to a jury or arbitration panel channels my teacher personality. I work as a forensic engineer with the intent of helping the legal industry understand engineering principles and to help citizens resolve their disputes justly. Though I have worked as a scientific programmer and chemical engineer, my primary expertise is in structural engineering. I began professional practice at kpff in Portland, OR in 1998. In 2001, I was hired by DCI Engineers. In 2003, I started my own consulting engineering firm which I continue to operate. I have designed concrete, steel, masonry and wood structures, generally commercial, government or schools....

David Alley, PE ANNA Inc.

Annapolis, Maryland
Electrical Engineering, Mechanical Engineering - electrical engineer, mechanical engineer, power plant, nuclear, gas, oil, coal, marine, design, commissioning
SUMMARY Electrical Power Plant Consulting Engineer and Project Manager experienced in • Switchgear, protection and control systems design, installation, startup, 
commissioning, performance testing and troubleshooting for • cogeneration, hydroelectric, geothermal, combustion turbine, steam 
turbine, diesel, gasoline and gas fired reciprocating engines and nuclear 
power plants and related equipment and systems for • power plant owners, facility owners, utilities, U. S. Navy, U. S. Air Force, 
US Coast Guard, MSC, environmental engineers, power system component manufacturers and switchgear & control systems manufacturers • Forensic expert witness and consultancy related to electrical engineering in electric power systems. 
 EDUCATION & CREDENTIALS • MBA, Colgate Darden Graduate School of Business Administration, University of Virginia, Charlottesville, VA 1983-1985....

H. Landis "Lanny" Floyd II, PE, CSP, CESCP, CUSP, CMRP, CRL, Life Fellow IEEE Electrical Safety Group Inc.

Elkton, Maryland
Electricity, Safety - workplace electrical safety, arc flash, electrical safety management, electrical codes & standards, NFPA70E, National Electrical Code, electrical injury, electrocution, electrical reliability, electrical maintenance, electrical construction, occupational electrical safety, OSHA, NESC, electric shock
I am an expert, author, speaker, and educator in occupational electrical safety. I received my BSEE from VA Tech in 1973. My 45+ year career with DuPont focused on electrical safety in the construction, operation, and maintenance of DuPont facilities worldwide. My responsibilities included improving management systems, competency renewal, work practices, and the application of technologies critical to electrical safety performance in all DuPont operations. I have published more than 90 peer-reviewed papers and magazine articles on occupational electrical safety. I have received awards from leading institutions recognizing my work to advance the practice of electrical safety. I am an adjunct faculty member in the graduate school of Advanced Safety Engineering and Management (ASEM) at the University of Alabama at Birmingham (UAB). At UAB, I teach Prevention through Design, Engineering Ethics, and Electrical Systems Safety which I developed for the ASEM curriculum....

Ole E Haaland, PE ANNA Inc.

Annapolis, Maryland
Electrical Engineering, Mechanical Engineering - electrical engineering, mechanical engineering, power plant, nuclear, gas turbine, generator, engineering, relays, design, contractor, commissioning, marine, Electrical Power, Utility, Power, Electrical Generation, Generation
...He is a registered professional engineer in Maryland and held a Senior Reactor Operator’s license at Indian Point #3 Nuclear Power Plant. Experience is in conventional, nuclear, and alternate fuel power plant mechanical and electrical systems management, design, construction, plant outage management, start-up, performance testing, and operation. He has performed as Project Manager, Construction Manager, and Commissioning Manager for several Greenfield power projects. He has successfully engineered, estimated, planned, executed work, and provided troubleshooting services for power plants of varied prime movers. His has been instrumental in meeting contractual and schedule requirements....

Susan A Abookire, BSEE, MD, MPH

Boston, Massachusetts
Medical Management, Internal Medicine - Hospital Liability, Hospital Negligence, Hospital Administration, Peer Review, Delayed Diagnosis, Missed Diagnosis, EMTALA, Sepsis, Falls, Sexual Assault, Infection Prevention, Credentialing, Privileging, Anticoagulation, Wrong Site Surgery, Medication Error, Safe Discharge
...Harvard educate and trained. Harvard Faculty. Past Vice-President, Board of Directors, Massachusetts Coalition for the Prevention of Medical Error. Extensive experience in developing programs for hospital quality, patient safety, and peer review and addressing issues such as Joint Commission Standards, Regulatory Quality Requirements, DNV Standards, Credentialing and Privileging, Medical Ethics, Infection Prevention, Medication Safety, Anticoagulation Safety, Wrong Site Surgery, Patient Discharge, Patient Admission, and Patient Transfer. Board Certified in Internal Medicine. Distinguished Fellow of the American College of Physicians. Remains clinically active as a part time attending physician. Experience as Chief Medical Officer. Former electrical engineer working as aviation engineer in the aerospace industry. Experienced expert witness - have reviewed dozens of cases and testified at both deposition and trial.

Benjamin A. White, MD, FACEP, FAAEM

Falmouth, Massachusetts
Emergency Medicine - Airway Management, Myocardial Infarction, Cardiac Arrest, Stroke, Sepsis, Pulmonary Embolism, Appendicitis, Allergic Reaction, Emergency Procedures, Foreign Bodies, Trauma, Fracture
...Ben’s academic work has focused on ED operations and systems improvement, with an emphasis on systems engineering, process flow, Lean methodologies, rapid cycle change, and improving patient experience. He has led multiple grant-funded projects in this capacity, with resultant peer-reviewed publications, and has lectured nationally on these topics at AAEM, SAEM, ACEP, and through multiple other invited presentations. He is also a gifted teacher, and has educated hundreds of students, residents, APPs, and nurses throughout his career.

Jeffrey A Grusenmeyer, RA, NCARB, MPE, CBO Jeffrey A. Grusenmeyer & Associates, Inc.

Michigan
Architecture, Construction Defects - Forensic Architect, Building Inspection, Architectural Professional Liability, Water Intrusion & Damage, ADA Consulting, Slip Trip and Fall, Building Code, Building Envelope, Waterproofing, Roofs, Fenestration, Construction Administration, Construction Standards, Standard of Care, Design Errors
...Professional Experience Principle Architect in a firm established in 1983, providing design services on a wide range of projects, including civic, recreational, commercial, educational, medical, and code consultation work. Served as Adjunct Professor at Kent State University College of Architecture and Environmental Design teaching Construction Methods and Materials I and II, building code and construction documents. Previous experience prior to the private practice includes work with Albert Kahn Associated Architects and Engineers in Detoit, Michigan; Ventura & Associates, Architects & Engineers in Detroit, Michigan; T.A. Badowski, A.I.A, Architects in Lakewood, Ohio; Argentieri Associates & Planners in Cleveland, Ohio; and the King James Group of Westlake, Ohio. Building Commissioner to the City of North Olmsted, Ohio....

Randal Hill, PhD Kodiakhill Services LLC

Honor, Michigan
Chemistry & Chemicals, Chemical Engineering - Colloid, Surface Chemistry, Silicones, Materials Science, surfactants, detergents, formulation, emulsions, microemulsions, liquid crystals, formulation, product development, patents, IP, personal care, household care, upstream oil & gas, electrophoretic displays, agricultural adjuvants
...With an educational background in physical chemistry (PhD) and physics he went on to establish a career working with surfactants for applications ranging from personal care and polymer coatings to oil and gas. After getting his start with Dow Corning (now Dow Silicones) in progressive research capacities, he spent time with E Ink during their startup phase and most recently with the oilfield at Flotek Chemistry. Key Accomplishments: Career defining innovations include the serendipitous development of superhydrophic silicone nanofibers, leading-edge microemulsion treatments with new dimensions of performance, and momentous diversification of Flotek’s patent portfolio (which grew by 1400%). Distinguished product innovator credited with 64 patents. Involved member of multiple organizations, including American Chemical Society, Society of Petroleum Engineers, American Physical Society, and American Oil Chemists Society....

Robert (Rob) C Hoffman Jr, PE, CFEI Creative Product Solutions, LLC

Coloma, Michigan
Engineering, Safety - fire, shock, burn, appliance, product, design, test, code, safety, failure, analysis, warning, instruction, literature, product safety, containment, inspection, litigation, product liability, expert
...Qualifications: Registered professional engineer in the state of Michigan Certified fire and explosion investigator (CFEI) Master certified in design for safety Master certified in force failure testing Certified in experimental statistics and statistical process control Member of the UL Standards Technical Panel for appliance codes related to clothes washers and dryers I worked in the consumer goods industry in appliances for over 28 years, which gave me the opportunity to serve on the dryer safety committee for the American Home Appliance Manufacturers (AHAM), as well as work extensively with Underwriters Laboratory ( UL) and CSA. Recognized as a significant knowledge source in the US on dryer fires and their causes, I was instrumental in the development of the clothes dryer drum containment standard recently implemented by all US codes agencies. I am certified to run both the UL and ANSI dryer drum fire containment test as well as the dryer base fire containment test....

troy galloway ASHI

Ellisville, Missouri
Construction Defects, Building Inspection - Arbitration/Mediation, Construction, Slip trip & Fall, Safety, Mold, Commercial Building Inspections, Construction Consultant, Building Manager, Concrete, Roofing, Siding, Deck/patios, Landscaping defects, Construction Superintendent, Property Safety, Doors, Windows, Water Leakage, ConstructionEd
Education 76-78 University of Southern California General Requirements 78- 82 Quincy College University of Springfield BS Building Engineering 04-06 University of Missouri/School of Metaphysics Metaphysics Ordained Minister Certifications Construction Superintendent Union Master Carpenter Union Journeyman Millwright National Home Inspector Association (NHIE) American Society of Home Inspectors (ASHI) Commercial Building Inspections Missouri Real Estate Board School of Education (Construction classes) STL Community College Instructor (Construction Classes) Construction Consultant Building Manager Missouri State Lead Risk Assessor EPA/RRP Lead Contractor Certified Boardroom Director...

Kenneth D Martin Door & Gate Experts

Las Vegas, Nevada
Premises Liability, Products Liability - Garage Door,Gates,garage door spring,overhead door,automatic gate,automatic garage door,garage door operator,gate operator,garage,commercial door,industrial door,parking gate,swinging gate,sliding gate,barrier gate,sectional door,rolling door,high speed door,jackshaft,access system,remote control
Garage Door and Gate Contractor Accredited, Institute of Door Education & Accreditation UL325 National Standards Technical Panel Voting Member Litigation Consultant, Expert Witness Door Manufacturing Designer & Engineer President National Association of Garage Door Manufacturers Door & Access Systems Manufacturer’s Association International (DASMA) Founding Member and Committee Chair. President Martin Door Manufacturing, Bachelor of Business Management, Engineering Emphasis, University of Utah 1976 Door & Gate Contractor employing IDEA Certified Technicians Licensed Garage Door & Gate Contractor in 6 states....

Amin Terouhid, Ph.D., PE, PMP, CFE Adroit Consultants, LLC

Upper Saddle River, New Jersey
Construction Defects, OSHA - Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, concrete inspection, standard of care, construction simulation and modeling, construction inspection, loss of productivity, critical path method (CPM), OSHA
...Licenses • Examined and certified as a Professional Engineer (P.E.) • Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE) • Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP) • Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and Scheduling Professional (PSP) and a Decision and Risk Management Professional (DRMP) • Examined and certified by American Concrete Institute (ACI) as a Concrete Construction Special Inspector Organizations • Principal Consultant with Adroit Consultants, LLC • Exam Committee, National Council of Examiners for Engineering and Surveying (NCEES) • Director of Education/Knowledge Platform, AACE-Metro New York Publications • Concurrent Delays: Definitional and Procedural Considerations, American Bar Association (ABA), 2019 • Recommended Practice PS-19 Linear Scheduling Method (LSM), AACE International...

Kiwesa King, PE, CCM, DBIA Expanded Resources LLC

New York, New York
Construction - Construction Management, Construction Administration, Construction Means and Methods, Construction Standard of Care, Construction Management Standard of Care, Construction New York City, Construction Contract Administration, Construction Documents, Construction Management Procedures and Operations
...King's professional credentials include those of New York State Licensed Professional Engineer (PE), Certified Construction Manager (CCM), Designated Design-Build Professional (DBIA), New York City Licensed Master Fire Protection Contractor (Certificate holder), New York City Licensed Site Safety Manager, and New York State Notary Public. Ms. King teaches undergraduate, graduate, and continuing education courses in Construction Management at New York institutions. Ms. King has been engaged in the construction industry for over twenty-nine years. Ms. King has served as an expert witness for fourteen years. Her expert witness experience and expertise include cases involving construction means and methods and construction management standards of practice.

Amin Terouhid, Ph.D., PE, PMP, CFE Adroit Consultants, LLC

New York
Construction Defects, OSHA - Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, concrete inspection, standard of care, construction simulation and modeling, construction inspection, loss of productivity, critical path method (CPM), OSHA
...Licenses • Examined and certified as a Professional Engineer (P.E.) • Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE) • Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP) • Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and Scheduling Professional (PSP) and a Decision and Risk Management Professional (DRMP) • Examined and certified by American Concrete Institute (ACI) as a Concrete Construction Special Inspector Organizations • Principal Consultant with Adroit Consultants, LLC • Exam Committee, National Council of Examiners for Engineering and Surveying (NCEES) • Director of Education/Knowledge Platform, AACE-Metro New York Publications • Concurrent Delays: Definitional and Procedural Considerations, American Bar Association (ABA), 2019 • Recommended Practice PS-19 Linear Scheduling Method (LSM), AACE International...

Thomas Collier, Jr Collier Consultants

North Carolina
Construction, Premises Liability - Defects, personal injury, insurance, codes, commercial, residential, accidents, falls, asbestos, ADA, sewer, water, liability, damages, general contractor, fire, flood, contracts, subcontractors, engineer
...Education: University of North Carolina at Chapel Hill - Economics and English, Summa Cum Laude Johnston Scholar, Phi Beta Kappa - 1983. Thesis on Disintermediation and Economic Cycles received Highest Honors The Westminster Schools – 1979. Cum Laude, recipient of Special Award for Service, awarded only in select years....

Jeffrey A Grusenmeyer, RA, NCARB, MPE, CBO Jeffrey A. Grusenmeyer & Associates, Inc.

Fairview Park, Ohio
Architecture, Construction Defects - Forensic Architect, Building Inspection, Architectural Professional Liability, Water Intrusion & Damage, ADA Consulting, Slip Trip and Fall, Building Code, Building Envelope, Waterproofing, Roofs, Fenestration, Construction Administration, Construction Standards, Standard of Care, Design Errors
...Professional Experience Principle Architect in a firm established in 1983, providing design services on a wide range of projects, including civic, recreational, commercial, educational, medical, and code consultation work. Served as Adjunct Professor at Kent State University College of Architecture and Environmental Design teaching Construction Methods and Materials I and II, building code and construction documents. Previous experience prior to the private practice includes work with Albert Kahn Associated Architects and Engineers in Detoit, Michigan; Ventura & Associates, Architects & Engineers in Detroit, Michigan; T.A. Badowski, A.I.A, Architects in Lakewood, Ohio; Argentieri Associates & Planners in Cleveland, Ohio; and the King James Group of Westlake, Ohio. Building Commissioner to the City of North Olmsted, Ohio....

Anthony Bruttaniti, AIA, LEED AP BD+C Bruttaniti Architecture LLC

Philadelphia, Pennsylvania
Architecture, Construction Defects - Architect, ADA compliance, Zoning, Building codes, Building product liability, Slip Trip Fall, Construction defects, Building envelope, Building materials, Construction accidents, Building demolition, Fire damage, Water damage, Structure collapse, Building personal injury
...His responsibilities and duties have included project acquisition and marketing; Project Development from concept ideas thru to construction; Client interaction, communication, and proposal writing; Zoning and Construction drawings for building permits; Managing structural and MEP engineers for the project; and problem-solving during construction. Mr. Bruttaniti was honored with an award for Excellence in Planning & Design from the Montgomery County Planning Commission, PA for an adaptive building re-use and sustainable design for a new Public Library in North Wales, PA. Litigation Support - Mr. Bruttaniti has Architect licenses in Pennsylvania, New Jersey, and Delaware, and has vast experience and knowledge of the architectural profession, with the expertise and qualifications to speak with integrity and proficiency in all aspects of building design and construction....

Gary D Fletcher, PhD RnDDx Solutions LLC

Media, Pennsylvania
Medical Devices, Biomedical Engineering - Mechanical Engineering, R&D, Product Development, Clinical diagnostics, Blood collection, Biospecimens, Point of care testing, Microfluidics, Spectroscopy, Cell therapy, Intellectual Property, Microscopy, Physics, Biomedical sensing, Optics, Imaging, Mathematics, Laboratories & Testing, Lasers
...Fletcher is Founder and Principal Consultant at RnDDx Solutions LLC, a consulting firm focused on industrial biomedical and mechanical engineering, and research and product development, in medical devices, diagnostics, optical devices, point-of-care blood sample testing, and on expert witness patent litigation, including subject matter expertise in medical device mechanical engineering, and subject matter expertise in medical devices for blood collection and blood sample processing for diagnostics and therapeutics. He has particular expertise in mechanical engineering design and development of non-invasive and minimally invasive biomedical diagnostics systems, blood collection and stabilization, blood separation, and blood and cell preparation for both diagnostic and therapeutic applications, including the development of sample collection devices, needles, and lancets. He is co-inventor on 23 patents for devices and methods in blood collection and processing....

Thomas D Gillespie, P.G. Gilmore & Associates, Inc.

Coopersburg, Pennsylvania
Geology, Environmental - Groundwater, Hydrogeology, Geology, Geo-Hazards, Mining, Stormwater, Oil & Gas, Bedrock Aquifer, Groundwater Contamination, Environmental Forensics, Environmental Evaluation, Environment, Water Resources, Water Supply, Karst, Karst Geology, Karst Hydrogeology, Sinkholes
...He is a published researcher in hydrostructural geology and karst hydrogeology, an adjunct university professor of geology and a frequent provider of continuing professional education courses. Mr. Gillespie is routinely invited to speak on matters of earth, environment and energy to government committees, national business organizations and educational institutions. He developed and leads a geoResource Risk Reduction practice, specializing in strategic representation in regulatory and legal venues. Mr. Gillespie has provided litigation support, testifying expert services, expert regulatory negotiation support and public representation on a wide range of geologic, hydrogeologic and environmental matters....

Jeffrey A Grusenmeyer, RA, NCARB, MPE, CBO Jeffrey A. Grusenmeyer & Associates, Inc.

Pennsylvania
Architecture, Construction Defects - Forensic Architect, Building Inspection, Architectural Professional Liability, Water Intrusion & Damage, ADA Consulting, Slip Trip and Fall, Building Code, Building Envelope, Waterproofing, Roofs, Fenestration, Construction Administration, Construction Standards, Standard of Care, Design Errors
...Professional Experience Principle Architect in a firm established in 1983, providing design services on a wide range of projects, including civic, recreational, commercial, educational, medical, and code consultation work. Served as Adjunct Professor at Kent State University College of Architecture and Environmental Design teaching Construction Methods and Materials I and II, building code and construction documents. Previous experience prior to the private practice includes work with Albert Kahn Associated Architects and Engineers in Detoit, Michigan; Ventura & Associates, Architects & Engineers in Detroit, Michigan; T.A. Badowski, A.I.A, Architects in Lakewood, Ohio; Argentieri Associates & Planners in Cleveland, Ohio; and the King James Group of Westlake, Ohio. Building Commissioner to the City of North Olmsted, Ohio....

Steven D High, MPH, MS, CIH, CSP, ARM, CHST, CXLT High Environmental Health & Safety Consulting Ltd.

Lancaster, Pennsylvania
Slip Trip & Fall, OSHA - Certified Industrial Hygienist, Safety, Occupational Safety, Chemical Exposure, Public Health, Trenching, Construction Safety, Cranes, Rigging, Accident Investigation, Coefficient of Friction, Slip Resistance, Lockout, Electrical Safety, NFPA 70E, Health Exposure, Noise, Safety Culture, OSHA
...Authorized Trainer and Instructor-Trainer for the OSHA Training Institute Outreach Education Center in Construction and General Industry. Post-baccalaureate Certificates in Environmental Health & Industrial Hygiene (Johns Hopkins) / Epidemiology & Bio-statistics (Drexel). Certified Safety Professional (CSP) Certified Industrial Hygienist (CIH) Construction Health & Safety Technician (CHST) Emergency Medical Technician - PA (EMT) Certified XL Tribometrist(CXLT)(slip-resistance) Frequent Public Speaker on Safety and Health Issues. Creative approaches and perspectives to cases. Defense and Plaintiff work. Organization Participation and Memberships: Lancaster County Industrial Safety Council (officer positions) American Society of Safety Engineers (ASSE) Member: Consultants’ Division American Industrial Hygiene Association (AHIA): Full Member; Member of the Occupational & Environmental Epidemiology Committee American Conference of Governmental Industrial Hygienists (ACGIH)....

Martin U Schlegel, Dr. rer.-nat. (Equivalent to PhD) chemneera LLC

Warrendale, Pennsylvania
Chemistry & Chemicals, Failure Analysis - Sports Technology, Sports Surfaces, Synthetic Turf, Artificial Turf, Playgrounds, Running Tracks, Gymnasium Floors, Court Surfaces, Construction Defects, Manufacturing, Recreational Coatings, Surface Coatings, Technical Textiles, Protective & Shock-absorbing Materials, Material Fatigue & Failure.
...Throughout his manufacturing career, he worked globally in various roles including management positions in business information technology, quality management, engineering and business M&A. Martin holds a Doctorate degree (Dr.rer-nat.) in natural science from the oldest technical university in Germany (Technische Universität Braunschweig) specializing in Chemical Engineering (technical chemistry), a German Diplom (MSc) in Chemistry and engaged in economic studies as part of his doctorate program. In addition, he completed the Certificate of Business Excellence (Executive Education) at the Haas School of Business, UC Berkeley, California. He is a Director and Board Member multiple companies, a casual lecturer on sports management, entrepreneurship and innovation and volunteers as the President of a cross-border student exchange scholarship program....

Mike Simard, PE, PMP, CEP PACED Engineering Inc

Berwyn, Pennsylvania
Engineering, Manufacturing - Engineering Design, Manufacturing Processes, Manufacturing Costs, Industrial Construction, Heavy Machinery, Project Management, Capital Cost Estimating, Quality Assurance, Industrial Safety, Process Scale-up, Pilot Plant, Biomass, Supercritical Fluids, and Slurry Pumping.
Expertise in engineering design, manufacturing processes, manufacturing costs, industrial construction, heavy machinery, project management, capital cost estimating, quality assurance, and industrial safety. Specific technical skills in industrial plant construction, pilot plants, process scale-up, commissioning & testing, and troubleshooting. Specific technical skills in biomass handling, slurry pumping, supercritical fluids, mixing systems, liquid/solid separation, control valves, compressed-air systems, material handling, and mechanical systems. Experienced expert witness in testimony and report writing, retained by both plaintiff and defense counsels, in cases involving manufacturing process design, facility decontamination/relocation, and industrial accidents. Over 30 years of experience in process design and manufacturing for start-ups to Fortune 100 companies in power generation, biomass conversion, and building material industries. Education includes BSME, MSME, and MBA....

Linda van Roosmalen, PhD LINC Design LLC

Gibsonia, Pennsylvania
Transportation, Industrial Design - wheelchair transportation, biomechanics, public transit, railcar boarding, accessible air travel, wheelchair securement, wheelchair restraint, seatbelt, crash safety, ergonomics, accessibility, paratransit, wheelchair lift, medical device, ramp, school bus, walker safety, warnings, usability, ADA
...With a strong background in Industrial Design Engineering and a decade of industry experience, Dr. van Roosmalen extends her expertise to medical device design and compliance. Her specific competencies include: • Device human factors and ergonomics, covering medical devices, injector systems, drug/device combination devices, device labeling, instructions for use, and intra-uterine devices (usability, safety, comfort, regulatory compliance). • In-depth knowledge of medical device regulations and their application to safety and effectiveness for use (IEC62366). In summary, Dr. Linda van Roosmalen is a highly qualified expert witness with a Ph.D. in rehabilitation science and technology, as well as a B.S. and M.S. in industrial design engineering. Her international publications and multiple patents on wheelchair safety technology and medical device innovation attest to her expertise....

Roger W. Griffith, P.E. Griffith Engineering & Consulting, Inc.

Jefferson City, Tennessee
Plumbing, HVAC - Plumbing, plumbing systems, plumbing codes, plumbing design, plumbing engineering, piping, hot water systems, scalding, Legionella, fuel gas systems, gas appliances, gas venting, carbon monoxide poisoning, HVAC, HVAC design, fire protection, sprinkler systems, construction defects, failure analysis
...Griffith, P.E. is a licensed, professional mechanical engineer in 18 states and has over 34 years of experience as a mechanical engineer. . He is the founder and principal of Griffith Engineering & Consulting. His experience includes plumbing, HVAC, and sprinkler system design, forensic analysis, and expert witness consulting. For the past 15 years, Mr. Griffith has provided expert witness services, including deposition and trial testimony. In addition to plumbing, HVAC and sprinkler systems, his areas of specialty include hot water system design, hot water scalding, legionella, and venting of gas appliances as it relates to carbon monoxide poisoning. Mr. Griffith is a Board Certified Diplomate Forensic Engineer (DFE) of the National Academy of Forensic Engineers (NAFE). Prior to founding Griffith Engineering in 1997, Mr....

Scott J. Anson, Ph.D., P.E. Anson Engineering, LLC

Harleton (Longview), Texas
Mechanical Engineering, Failure Analysis - Mechanical Engineering, Materials, Failure Analyis, Forensic Engineering, Manufacturing, Design, Warnings - Marketing Defect, Oil & Gas, Metallurgy, Stress, Root Cause, Safety Hierarchy Application, Laboratory Analysis, Inspection, Firearms, Electronics, Field Investigations, Fracture Surface
...Scott Anson has been practicing and teaching engineering for over 28 years. The first 8 years were in industry engineering roles involving process development and tooling design, as well as extensive laboratory failure analysis. During his over 20+yr. academic career he has held multiple industry appointments simultaneous with his academic role, in addition to his independent consulting work. He provides forensic engineering services involving product design, manufacturing defects, and warnings/instructions (marketing defects). He is a licensed professional engineer (P.E.) in Texas and has an active NCEES record to facilitate licensing in other states. Dr....

Justin Hall, MAS, PE Hall Engineering Group, Ltd

Texas
Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.
...Justin Hall, PE is a licensed professional engineer providing a broad range of services in forensic engineering to insurance companies and law firms, construction, energy, mining, and technology, engineering and architectural firms, governmental and educational institutions, property owners, builders and individuals. With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi....

Victor E. Holloman, PE VICTOR E. HOLLOMAN CONSULTING

Missouri City, Texas
Accident Reconstruction, Biomechanics - Accident reconstruction, Biomechanics, Event Data Recorder (EDR) Analysis, Engine Control Module (ECM) Analysis, Low speed analysis, Site survey, Vehicle damage analysis, Photogrammetry, Acceleration force analysis, Delta-V determination, Momentum analysis, Lane change analysis
Registered professional engineer with extensive training in accident reconstruction and biomechanics, including traumatic brain injury, acceleration, force analysis, crash scene investigation, crash data retrieval data analysis. As a registered professional engineer with an excellent background in accident reconstruction and biomechanics, Mr. Holloman has performed accident reconstruction for over twenty-five years. Over the past several years Mr. Holloman has worked a number of commercial vehicle (18 wheeler) cases involving automobiles and pickup trucks and provided computer renderings of accident scenarios and time/distance analysis. His consulting specialties are commercial (18 wheeler), private vehicle and forklift accident reconstruction, biomechanics, fatigue failure analysis, mechanical failure analysis, and machine tools failure analysis. Mr. Holloman also has trial and deposition testimony experience, having testified in trial or deposition in over 25 cases. Mr....

Bhaskar Kura, PhD, PE i2Care, Inc.

San Antonio, Texas
Environmental Engineering, Environmental - Air Quality Modeling, Indoor Air Quality, Hazardous Air Pollutants, Public Health, Cancer Risk, Worker Health, Pollution, Pollution Prevention, Hazardous Waste, Solid Waste, Medical Waste, Exposure Assessment, Emissions Modeling, Water Pollution, Green House Gas Emissions, Dispersion Modeling.
...Bhaskar Kura is a higher education leader and has 35 years of professional experience as a professor, researcher, and scientist in the filed of environmental engineering. Over the years, he worked in industry, consulting, and academia. He is a registered Professional Environmental Engineer in the State of Louisiana. He published more than 100 technical articles and supervised graduate students for their MS and PhD degrees....

Cassandra K Moody, M.S., P.E. Time For Change, LLC.

Houston, Texas
Oil and Gas, Engineering - Pipeline, PHMSA, Pipeline Safety, Integrity Management, IMP, TRRC, Pipelines, Gas Pipeline, Oil Pipeline, Oil & Gas Pipelines, 49 CFR 192, 49 CFR193, 49 CFR 195, United States, Canada, North American, Safety Management Systems, Project Management, Contracts
...Moody, P.E. is passionate about engineering risk-informed solutions to safely optimize ROI: Return on INTEGRITY. She conveys visionary leadership, technical competency, and distinctive communication cultivated over a decade of midstream operations and integrity engineering experience with a mid-size oil and gas operator. As a proficient expert in the midstream pipeline industry, Mrs. Moody has represented both plaintiffs and defendants on a variety of cases both in the courtroom and through expert opinion reports. Mrs. Moody’s retained engagements as an independent Engineering Expert have resulted in favorable resolutions for 100% of her clients to date. Mrs. Moody is an effective communicator who excels at presenting complex information simply, both written and verbally....

Bradley N Plank, PE MME Forensic Consulting, Inc.

Dallas, Texas
Mechanical Engineering, Metallurgy - Product Liability, Failure Analysis, HVAC, Oilfield, Heavy Equipment, Cranes, Cables, Medical Devices, Plastics, Boilers, Water Heaters, Plumbing
Using his combination of mechanical and metallurgical (including plastics) experience and education, Mr. Plank provides forensic and consulting engineering services to attorneys, insurance professionals, and manufacturing companies. A registered engineer in Texas and 23 other states, his experience includes 32 years in manufacturing in the metals processing industries, 29 years performing failure analyses, and 26 years investigating claims. Mr. Plank has testified in a wide variety of matters including personal injury and property damage, in both state and federal court, and his testimony has never been excluded. Assignments have involved mechanical equipment, appliances, oil and gas transmission equipment, plumbing, HVAC, heavy equipment, machine tools, cranes and wire cables, manufacturing processes, and thermal processes, among many others.

Johnie P. Spruiell, P.E. Integrity Forensics and Engineering, LLC

Sanger, Texas
Mechanical Engineering, Forensic Science - Electrical Engineering, Energy, Equipment & Machinery, Failure Analysis, Fire, Laboratories & Testing, Oil and Gas, Products Liability, Product, Plumbing, Leak, Warnings & Labels, Guarding, CSST, Gas Explosions, Natural Gas, Propane, LPG, Forensic Engineering, Expert Witness
LICENSURE: -Texas Professional Engineer License #57023 -Colorado Professional Engineer License #24555 -Mississippi Professional Engineer License #17888 -Alabama Professional Engineer License #35693 -North Carolina Professional Engineer License #049314 -South Carolina Professional Engineer License #37169 -Virginia Professional Engineer License #0402061315 -Michigan Professional Engineer License #6201069726 -Minnesota Professional Engineer License #58020 EDUCATION: -BSME, University of Texas at Arlington, 1978 AFFILIATIONS: -MEMBER, American Society of Mechanical Engineers (ASME) -SENIOR MEMBER, National Academy of Forensic Engineers (NAFE) -MEMBER, National Council of Examiners for Engineering and Surveying (NCEES) -MEMBER, National Society of Professional Engineers (NSPE) -MEMBER, Texas Society of Professional Engineers (TSPE) -Pi Tau Sigma -Tau Beta Pi PRIMARY AREAS OF EXPERTISE: -Fire and Explosion Analysis Fuel Gas Fires and Explosions Residential, Commercial, Industrial...

Amin Terouhid, Ph.D., PE, PMP, CFE Adroit Consultants, LLC

Texas
Construction Defects, OSHA - Civil Engineering, industrial engineering, forensic schedule and delay analysis, construction safety, slip and fall, construction injury, concrete inspection, standard of care, construction simulation and modeling, construction inspection, loss of productivity, critical path method (CPM), OSHA
...Licenses • Examined and certified as a Professional Engineer (P.E.) • Examined and certified by the Association of Certified Fraud Examiners as a Certified Fraud Examiner (CFE) • Examined and certified by Project Management Institute (PMI) as a Project Management Professional (PMP) • Examined and certified by the Association for the Advancement of Cost Engineering (AACE International) as a Planning and Scheduling Professional (PSP) and a Decision and Risk Management Professional (DRMP) • Examined and certified by American Concrete Institute (ACI) as a Concrete Construction Special Inspector Organizations • Principal Consultant with Adroit Consultants, LLC • Exam Committee, National Council of Examiners for Engineering and Surveying (NCEES) • Director of Education/Knowledge Platform, AACE-Metro New York Publications • Concurrent Delays: Definitional and Procedural Considerations, American Bar Association (ABA), 2019 • Recommended Practice PS-19 Linear Scheduling Method (LSM), AACE International...

Michael Troy Richardson, MA, BS in Engineering Momentum Engineering, LLC

Washington, Utah
Mechanical Engineering, Structural Engineering - Ziplines & Trampoline Courts: Physics, engineering, industry standards, safety & rescue procedures, state and local regulations, and testing. Over 70 expert engagements and zipline building projects in over 30 U.S. states; Several more in Puerto Rico, Mexico, and Canada; 100% in the last four years.
...Richardson is the President of Momentum Engineering, LLC; he's designed and built aerial adventure rides, and devices since 1988. He is working on a Master's degree at Utah TECH University. Bachelor of Science in Engineering and 30+ semester hours of Physics. Building ziplines for 20+ years, where he has designed, evaluated, and patented multiple safety elements and devices. In 2000, Park City Mountain Resort Zipline designed, testing, prototypes, and Patents for passive braking trolleys, a series of springs as the emergency arrest device, and built the towers for a 4000+ foot long zipline. In 2009 he built and designed his commercial zipline in Spanish Fork, Utah. He has three U.S. Patents for zip line safety trolleys and springs with at least one pending. He is on two advisory and voting committees with the American Society for Testing and Materials (ASTM)....

James J. Lilje, ATP, CFI, CFII, MEI

Vashon, Washington
Aviation & Aerospace - Pilot Training, Pilot Evaluation, Flight Planning, Flight Evaluation, Airplane Flight Risk Assessment, Flight Risk Mitigation, Extended Overwater Flight, ETOPS, Performance Based Navigation, PBN, Required Navigation Performance, RNP, Cat. II & III Approaches, Technically Advanced Aircraft, TAA
...Examples of recent special courses include: • A Part 61 Multi-engine transition course for Private and Commercial Pilots training in aircraft and simulators. • Lead Instructor in a new FAR 141 approved course to transition helicopter pilots to fixed wing aircraft. • A 5 to10 day ATP course using airplanes and simulators. • A 21day course for pilots of the Turkish Air Force and Indian Navy to prepare them for three separate FAA ratings. • Initial and recurrent training for FAA Flight Safety Inspectors in technically advanced light single-engine and multi-engine airplanes....

Daniel R Robles, PE, MBA Community Engineering Services, PLLC

EDMONDS, Washington
Mechanical Engineering, Real Estate - plumbing, pipe, re-pipe, leaks, failures, Inspection, construction, water damage, feasibility, epoxy liner, CPVC, Aquatherm, PEX, Galvanized, copper, risk assessment, machinery, insurance, defect, standard of care, Blockchain, smart contract adjudication.
Thirty-five years of practical engineering experience across the aerospace, building construction, and technology industries. Bachelors of Science in Mechanical Engineering and Masters degree in International Business Administration. Expert Witness at the intersection of mechanical engineering, business practices, and standard of care.  Technical specialties include plumbing systems (failures, leaks, defects and corrosion), building envelope failures resulting in mold or water damage, Real Estate transactions, mechanical failures due to improper maintenance or operation, Investigation, testing, and report writing. Excellent public speaking skills with the ability to explain complex matters in simple and accessible terms. Knowledgable in recent technologies such as blockchain, digital twin, and digital twin applications for the engineering professions. Experienced in cross border and international engineering practices....

Drew Neckar, MBA, CPP, CHPA COSECURE Enterprise Risk Solutions

Strum, Wisconsin
Security, Premises Liability - Healthcare/Hospital Security, Bar/Nightclub Security, Parking Lot Security, Campus Safety, School Security, Negligent Security, CPTED, Crime Prevention, Crime Foreseeability, Use of Force, Security Officers/Guards, Workplace Violence, Security Assessment, Risk Assessment, Security Training/Education
Drew Neckar is a board-certified security management professional who over his 20+ year career has managed safety and security programs for companies operating in the healthcare, higher education, financial services, and nightclub industries. In 2014 Drew founded Security Advisors Consulting Group, a full-service security consulting firm that has provided strategic advice on improvement of security and violence prevention programs to companies throughout the United States and internationally. Drew and security programs he has managed have been recognized with awards including: Mayo Clinic Health Systems' Security Department was awarded the “Program of Distinction” award from the International Association of Healthcare Security and Safety (IAHSS) while under Drew's leadership. Mayo Clinic Health Systems' Security Department was named to Security Magazine’s “Security 500” as one of the top Security programs while under Drew's leadership....