13 Weld Failure Expert Witnesses Found

Results Sorted Below by State

Lamar T. Hawkins, PE, JD PEG, Inc.

Birmingham, Alabama
Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.
PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

MARTIN M BALABAN, PhD, PE AR TECH

Encino, California
Accident Reconstruction, Safety - Vehicle collisions, Premises liability including slip/trip & fall, Safety, Code Compliance, Construction & Industrial Accidents, Failure Analysis, Human Factors, Biomechanics, Mechanical Engineering, OSHA, ADA compliance, Products Liability, Criminal, Licensed Safety Engineer by State of California
...Premises Liability: Code Compliance, Slip, trip, floor friction testing, stairway & ramp accidents, glass injuries, guardrails; illumination issues; manual & electronic gates, ladders, door closing mechanisms, falling objects, structural failures. Occupancies include single- and multi-family residences, retail stores, office buildings, garages, sidewalks, parks and other public access. Industrial & Construction accidents: Walking-working surfaces including ramps, hoisting & conveying, powered lifts, work platforms, forklifts, construction vehicles, materials handling & storage, machine guarding, ladders, scaffolding, trenching & shoring, Cal-OSHA compliance, lockout/tagout, IIPP analysis, human factors & ergonomics issues. Products Liability: Liability regarding design, manufacturing, maintenance, failure to warn....

Nikhil K Kar, Ph.D., P.E. Kars' Advanced Materials, Inc.

Anaheim, California
Metallurgy, Mechanical Engineering - Materials Science, Composite Materials, Fractography, Fractures, Weld Failures, Failure Analysis, Product, machinery, and equipment failures
Nikhil’s expertise is in fields of mechanical engineering, materials science, metallurgy, failure analysis, mechanical/materials behavior, laboratory testing, contamination analysis and equipment function to determine cause(s) of failure. He is involved in various consulting projects including implant failures, product failures, automotive component failures and patent infringement matters. When time permits, he teaches undergraduate and graduate courses for the Viterbi School of Engineering at the University of Southern California as an adjunct assistant professor of engineering practice. He has qualified as an expert witness in both State and Federal Court.

bernard e kopaskie

covina, California
Metallurgy, Failure Analysis - heat treating, quality control, metallurgy , material selection, failure analysis
...Taught classes in Heat Treating, Welding, and specialty metals. Wrote the initial document for the SAE ARP 1962 Heat Treating Training. Level Three Nondestructive Testing Inspector - Magnetic and Penetrant Testified as expert witness – Materials selection, Quality control, Failure analysis, Processing, Properties, Welding, Casting

Joseph Quinn, M.S., P.E. Materials FACT

Los Angeles, California
Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle,Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe, HVAC, CPVC, Oil & Gas, Welding
...He has provided over 1,000 Failure Analysis investigations on metallic and non-metallic (glass, plastic, rubber, and composite) materials or products. Mr. Quinn provides metallurgical and materials consultation, expert witness testimony, and forensic failure analysis for civil litigation with retentions by defendants and plaintiffs. He has received awards in the International Metallographic Contest and has conducted several presentations on metallurgical engineering and failure analysis subjects at universities, ASM meetings, and industry events. He is President of the National Society of Professional Engineers in California (NSPE-CA) and is active in several technical societies. He has taught metallurgical engineering course topics in Principals and Applications of Steel Alloy Design at the University of Pittsburgh School of Engineering....

Frederick C Anderson, PE Advantec Engineering LLC

Avon, Connecticut
Failure Analysis, Products Liability - Metallurgy, Materials Science, Forensic Engineering, Corrosion, Fatigue, Fracture, Pipe/Tube/PEX/CPVC, Valve, Bolt, Coupling, Boiler, Power Plant, Quality, Weld, Aerial Lift, Hoist, Wire Rope, Fire Protection, Plumbing, Construction Defects
...Anderson is the founder of Advantec Engineering LLC and provides expert consultation, laboratory testing and analysis, and litigation support regarding materials failure analysis, forensic engineering investigations, corrosion, and structural analysis. He has more than forty years of professional engineering experience. Mr. Anderson has provided engineering support and/or testimony for cases involving product liability, industrial accidents and equipment failures, commercial and residential accidents and equipment failures, bridge structures, and aircraft, marine, and vehicle accidents. He has also provided expert testimony and/or litigation support in cases involving flow accelerated corrosion, stress corrosion, corrosion fatigue, pitting, weld defects, and fitness for service of large industrial components, commercial products, and consumer products. Mr....

Edward S. George E & S Consulting, Inc.

Saint Augustine, Florida
Metallurgy, Failure Analysis - Metallurgy, Products Liability, Coatings Inspection, Welding Inspection, Slip and Falls, Material Science, Forensic Engineering, Corrosion, Fatigue, Fractures, Bolt Failures, Weld Failures, Construction Defects
...Extensive experience in the field of failure analysis involving a variety of products, components, and materials utilized in both industrial and consumer applications. Experience in inspection and failure analysis of building materials. Proficient in microscopic analysis techniques and digital imagery. Proficient in destructive and non-destructive testing techniques and procedures in accordance with the applicable American Society of Testing Materials Standards. Direct experience in the field of materials thermal processing and procedures. Expert in material science, forensic engineering, corrosion, fatigue, fractures, bolt failures, weld failures andconstruction defects. Professional Licenses  Registered Professional Engineer: P.E. #51375 Florida (1997- Present)  Certified Welding Inspector: C.W.I #07060051 (2007-Present)  Certified AMPP Coating Inspector Level 1: #104381 (2021-Present)

Michael P. Lawler, MS, CSP, ASP, CHST Safewit, Inc.

Orland Park, Illinois
OSHA, Construction - OSHA, Construction, Fall Protection, Multi-Emplyer, Fall Prevention, Slips, Trips, Falls, Scaffold, Work Zone, MUTCD, Crane, Steel Erection, Excavation, Silica, Lead, Tunnel, Confined Space, MEWP, scissor lift, aerial lift, Struck by Equipment, back over, catastrophic injury, amputation, crush
...Army Corps of Engineers • Excavation, Trenching, & Soil Mechanics • Slip, Trip, Falls, Stirs & Floor Safety Certified Walkway Auditor, Certified Forensic Slip Expert (CFSE) • Fall Protection, Fall Prevention, Personal Fall Arrest Systems (PFAS), • Forklift & Lull Safety • Hand & Arm Safety • Hand Tool Safety • Heavy Construction Equipment back over, run over, and struck by • High Visibility Safety Apparel • Marine & Barge Safety • NFPA 101 • NFPA 70E • OSHA Crane Signals • OSHA Whistle Blower protections for safety related matters • Permit Required Confined Space & Rescue Planning • Pile Driver Operations • Rapid Water Rescue • Respirator Fit Testing and Use • Roadway & Work zone Safety, Flaggers, and Temporary Traffic Control Devices (MUTCD) Construction Signage • Safety Training, Failure to train, inadequate training, and other safety training issues....

Robert E. Burnham, PE Burnham Engineering Associates, LLC

PLYMOUTH, Michigan
Engineering, Transportation - Failure Analysis, Automotive Design Analysis, Accident Reconstruction, Material Handling, Trailer Loading, Forensic Logistics Analysis, OSHA Compliance/Standards, Warning Labels, Machine Guarding, Stamping Presses, Injection Molding Presses, Backhoes, Loaders, Industrial Accidents, Appliance Leaks.
...In-plant Quality Manager, Senior Manufacturing Engineer, Senior Engineer of Manufacturing Process Analysis, including metal stamping presses, robotic welding equipment, injection molding presses. Member, National Society of Professional Engineers, Michigan Society of Professional Engineers, and National Academy of Forensic Engineers. 11 patents. 27 years Adjunct Professor in Manufacturing Engineering, Schoolcraft College. Forensic Engineering, investigation of mechanical design defects, product and design failure analysis, patent disputes, product liability, product defects. Vice President of Design and Manufacturing Engineering for 3 major corporations....

Lamar T. Hawkins, PE, JD PEG, Inc.

Mississippi
Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.
PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Brett Pond, PhD, PE, CWI Pond Industries LLC

Omaha, Nebraska
Failure Analysis, Metallurgy - Derailment Investigation, Certified Welding Inspector (CWI), Professional Engineer (PE), Forensic Metallurgy, Railroad, AREMA Rail Testing, Mechanical Testing, Metallurgical Testing, Mechanical Engineering, Corrosion, API Fitness for Service (FFS) Evaluation
Brett has over 13 years of experience as a mechanical engineering and metallurgical consultant specializing in forensic metallurgy (failure analysis). He has a strong background in the rail industry, having participated in hundreds of derailment investigations and rail related failure analyses. Brett has earned international recognition for his failure analysis capabilities and has a wide range of experience, including: API Fitness for Service (FFS) Evaluations, field testing, mechanical/metallurgical laboratory management, legal expert witness services, and failure analysis for Rail, Food, Manufacturing, Oil and Gas, Medical, and Transportation industries. Brett obtained his Doctor of Science degree in Mechanical Engineering from Washington University in St. Louis, has obtained Professional Engineering (PE) licensure in 48 states, and is an AWS Certified Welding Inspector (CWI)....

D.R. Foster, PhD, PE Expert Welding Engineering and Inspection

Swedesboro, New Jersey
Failure Analysis, Safety - Welding Engineering, Weld Failures, Welding Design, Industrial Safety, 3D Printing of Metals, Welding, Welding Safety, Inspection, Welding Metallurgy, Welding Defects, Torch cutting, Forensics, Codes Compliance, Non-Destructive Testing, Manufacturing, Marine, Navy, Aerospace, Military, ASME, AWS
...Foster is the Principal Engineer at Expert Welding Engineering and Inspection, where he focuses on welding engineering consulting, inspection, and the training of engineers and technicians. Dr. Foster is an expert in regard to the design, manufacture, testing, and safety associated with welded structures. In addition to Dr. Foster’s significant experience in the field of welding engineering in both academia and industry, Dr. Foster possesses a BS, MS, and PhD in Welding Engineering. Strongly dedicated to his craft, Dr. Foster has earned multiple certifications related to fields of welding engineering and inspection. These certifications include Certified Welder (CW), Certified Welding Inspector (CWI), Certified Welding Supervisor (CWS), Certified NDT Level III Inspector (NDT III) and Licensed Professional Engineer (PE), all of which have prepared Dr. Foster exceptionally well to properly analyze failures and other welding problems that are the subject of litigation. Dr....

Barry Formisano Formisano & Associates, Inc.

Gardiner, New York
Failure Analysis, Metallurgy - Weld Failures, Welding Safety, Welding Processes, Weld Inspection and testing, Weld Engineering, Weld Metallurgy, Brazing and soldering, Manufacturing Weld Defects, Weld Structural Fabrication, Pipeline Weld Failures, Welding Codes Compliance, Construction Weld Failures, Welding Consulting
I have been an independent welding consultant since 1992, with 30+ years experience in the welding industry involving research and development and industrial applications of welding procedure qualifications of record, welding procedure specifications, welding fabrication, welder performance qualifications, nondestructive and destructive inspection and testing of welds, and weld failure analysis. As a consulting and testifying expert witness I have been qualified by Courts in several states; and have been retained by both plaintiffs and defendants for lawsuits involving product liability, manufacturing defects, personal injury and code compliance. I hold degrees in Welding Technology, Mathematics and Science; in addition to college level teaching credentials in the field of welding. Previous employment includes positions with the United States Department of Energy (DOE) and the Naval Nuclear Propulsion Laboratory; these positions required a high level security "Q" clearance....