115 Engineering Structural Expert Witnesses Found

Construction, Engineering - Construction Delay, Forensic Engineering, Construction Defects, Construction Claims, Construction Management, Structural Engineer, Roof Consultant, Foundation Engineer, Building Envelope Specialist, EIFS, Scheduling Engineer, Planning Engineer, Mechanical Engineer

Experienced forensic engineer and construction claims expert with residential, commercial, and industrial experience. Capable of evaluating structural failures, construction defects and delay claims by contractors. Has firm with experts in mechanical engineering, electrical engineering, plumbing, HVAC, roofing and EIFS. Testifying experience in depositions and courtroom. Extensive experience in the engineering and construction of large industrial plants, both manufacturing and petrochemical type facilities.

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.

PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Mechanical Engineering, Failure Analysis - Accident Reconstruction, Automotive Engineering, Fire, Explosions, Plumbing, Premises Liability, Slip-Trip & Fall, Bicycle, Motorcycle, Products Liability, Transportation, Recreational Vehicles, Heavy Equipment, Industrial Equipment & Machinery, HVAC

...Behrens has 40 years of experience in mechanical engineering, with the last 36 years primarily devoted to failure analysis and forensic engineering. His forensic engineering practice is diverse and has included conducting over a thousand engineering investigations involving a wide range of fires, explosions, accidents, and product failures. Mr. Behrens has conducted hundreds of full-scale vehicle crash, fire and component-level tests, which has provided a practical basis for his extensive knowledge and expertise in the analysis of automotive fires, failures and accidents. Mr. Behrens also has expertise in fire and failure analysis involving appliances, plumbing systems, fire sprinkler systems, HVAC, and commercial/industrial equipment. Mr....

Structural Engineering, Engineering - Wood, masonry, steel, concrete structures. Construction defect, insurance litigation, professional liability claims. Seismic/wind design, code review, standard of care analysis. Also foundations, underpinning, retaining walls, and tie-backs. Extensive graphics and animations capabilities.

Josephson-Werdowatz & Associates (JWA), founded in 1988 and with licenses in thirty states, has provided structural design and construction defect investigations/evaluations across the United States and abroad. Structural evaluations included wood, masonry, steel, and concrete structures, with particular emphasis on seismic and wind design. JWA has experience working with specialty materials such as acrylic, aluminum, and glass as well. Evaluations also include code review and analysis, and standard of care analysis. JWA has extensive experience with geotechnical structures such as special foundations, underpinning, retaining walls, tie-backs, and soil nails, among others. JWA strives for a reasoned, accurate, and practical solution to structural engineering problems and deficiencies. Principal Structural Engineers Carl H. Josephson, PE, SE; Dan R. Werdowatz PE, SE; and Stephen P....

Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.

...Justin Hall, PE is a licensed professional engineer providing a broad range of services in forensic engineering to insurance companies and law firms, construction, energy, mining, and technology, engineering and architectural firms, governmental and educational institutions, property owners, builders and individuals. With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi....

Accident Reconstruction, Safety - Vehicle collisions, Premises liability including slip/trip & fall, Safety, Code Compliance, Construction & Industrial Accidents, Failure Analysis, Human Factors, Biomechanics, Mechanical Engineering, OSHA, ADA compliance, Products Liability, Criminal, Licensed Safety Engineer by State of California

...Premises Liability: Code Compliance, Slip, trip, floor friction testing, stairway & ramp accidents, glass injuries, guardrails; illumination issues; manual & electronic gates, ladders, door closing mechanisms, falling objects, structural failures. Occupancies include single- and multi-family residences, retail stores, office buildings, garages, sidewalks, parks and other public access. Industrial & Construction accidents: Walking-working surfaces including ramps, hoisting & conveying, powered lifts, work platforms, forklifts, construction vehicles, materials handling & storage, machine guarding, ladders, scaffolding, trenching & shoring, Cal-OSHA compliance, lockout/tagout, IIPP analysis, human factors & ergonomics issues. Products Liability: Liability regarding design, manufacturing, maintenance, failure to warn....

Accounting, Business Operations - Financial, operational turnarounds, restructurings, mergers, acquisitions, CEO, CFO, CRO, governance, forensic, fraud, corporate investigations, certified, turnaround, insolvency, restructuring, CPA, chartered global management accountant, credentialed, fraud examiner, board, best practices

...Consumer products, services; franchising; retail, wholesale distribution; food processing, packaging; restaurants; agribusiness; real estate; engineering, construction; industrial manufacturing, assembly; trucking, transportation; aerospace, defense; waste management; energy – oil & gas, shale, mining; chemicals; fertilizers; lending; dealerships, service, repair; education; telecom, media, technology....

Video, Accident Reconstruction - Visibility, Daytime Visibility, Nighttime Visibility, Visibility Study, Visibility Analysis, Video, Video Analysis, Photography, Photo Analysis, Photogrammetry, Mapping, Visual, Drone, UAV, Aerial, GIS, Animation, Photomodeling, 3D, Audio, Enhancement, Authentication, Lighting, Human Factors

...CASES WORKED: Accidents (cars, truck, tractor trailer, farm machinery and implements of husbandry, bus, cargo, train, vessel, pedestrian, bicycle, motorcycle), Slip, Trip & Fall, Wrongful Death, Police Shootings, Property Damage, Defamation, Personal Injury, Criminal, Civil Rights, Maritime, Train, Product Misrepresentation, Construction Defect, Elder Care, Wildland Fire, Structure Fire, Obstructed View. SERVICE AREA: Services are offered nationwide. Video and photo analysis work can often be completed remotely, without the necessity of a site visit. PRESENTATIONS: Paul provides introductory and advanced technical presentations to law firms and forensic science professional groups. MEMBERSHIPS: Member of the Society of Forensic Engineers and Scientists- SFES.us. Member and former editor of the California Association of Accident Reconstruction Specialists- CA2RS.org.

Structural Engineering, Engineering - Wood, masonry, steel, concrete structures. Construction defect, insurance litigation, professional liability claims. Seismic/wind design, code review, standard of care analysis. Also foundations, underpinning, retaining walls, and tie-backs. Extensive graphics and animations capabilities.

Josephson-Werdowatz & Associates (JWA), founded in 1988 and with licenses in thirty states, has provided structural design and construction defect investigations/evaluations across the United States and abroad. Structural evaluations included wood, masonry, steel, and concrete structures, with particular emphasis on seismic and wind design. JWA has experience working with specialty materials such as acrylic, aluminum, and glass as well. Evaluations also include code review and analysis, and standard of care analysis. JWA has extensive experience with geotechnical structures such as special foundations, underpinning, retaining walls, tie-backs, and soil nails, among others. JWA strives for a reasoned, accurate, and practical solution to structural engineering problems and deficiencies. Principal Structural Engineers Carl H. Josephson, PE, SE; Dan R. Werdowatz PE, SE; and Stephen P....

Civil Engineering, Engineering - Water related system modeling and construction defect analyses, Design and PS&E, Drinking water flow and pressure, Wastewater and sewer backup, Storm water drainage and flooding, Groundwater and seepage, Tidal hydrodynamics, Water pumping and storage, Hydraulic and hydrologic analyses, Irrigation

...Lewandowski is a registered professional engineer in the State of California, and has over 35 years of professional experience in water related systems analysis, modeling and construction defect review, including: Drinking Water Systems – Wide range of project size and experience, from analyzing low water pressure conditions in HOA water distribution systems potentially caused by construction defects to City wide water distribution system master planning of piping, pumping and storage facilities to maintain water pressure and quality. Wastewater Systems – District Engineer services for a Sanitary District, including Master Plan review and development, modeling of peak wet weather flows, and project management of design and construction. Identified causes and resolutions for sewer backup and overflow conditions....

Construction, Construction Defects - Construction Claim, Construction Engineering Contractor, Construction Cost, Construction Schedule, Construction Accident, Construction Management, Construction GC, Concrete Contractor, Concrete, Steel Construction, Construction Hospital, Construction Public Works, Construction Indian Gaming & Hotels

...Construction Engineer with 40 + years of continuous construction experience as a general, sub and concrete contractor. Career positions progressing from: laborer, field engineer, superintendent, estimator, project manager, project executive to principal. Licensed contractor with classifications in: “A” Engineering, “B” Building & “C-8” Concrete. Product Type Experience: Residential, commercial, health care, education, light industrial, military, public works, and site development including: offices, retail, restaurants, food service, multifamily high-rise, apartments, condos, hospitals, medical office buildings (MOB), hotels, schools, stadium, theater, parking, power / co-generation, waste water treatment, zoos, Indian gaming and casinos. Concrete Expertise: High-rise (to 51 floors), slip form, jump form, tilt-up, precast, pre-stressed, post tension slab, mat slab, caisson, underpinning, shoring and foundation....

Medical Devices, Intellectual Property - Mechanical Engineering, Forensic, Medical Device, Nitinol, Biomedical, Patent,IP, Consumer Products, Failure Analysis,Fracture,Fatigue, Truck Rollover, Crashworthiness, Finite Element, FEA, Reliability, Cell Phone,IVC, Composite Material,Piping,Equipment,Machinery,Food Processing,Personal Injury

...Kim Parnell, PhD, PE is Principal & Founder of Parnell Engineering & Consulting (PEC). Dr. Parnell holds PhD and MSME degrees in Mechanical Engineering from Stanford University, a BES from Georgia Tech, and is a registered Professional Mechanical Engineer (PE) in the State of California. He is an ASME Fellow, an IEEE Senior Member, and a Member of ASM and SAE. Dr. Parnell is Past-Chair of the IEEE Santa Clara Valley Section (IEEE-SCV) (over 13,000 members) and Past-Chair/Board Member of the IEEE Consultants' Network of Silicon Valley (IEEE-CNSV). Dr.Parnell is an experienced Expert Witness, has provided testimony in both trial and deposition, and has authored numerous expert reports, ITC and IPR declarations. He has worked extensively as an expert in medical devices, patents, product failure, product liability, and personal injury. Dr. Parnell has been retained in medical device litigation cases that are in the news.  ...

Aquatics Safety, Construction - Drownings, Swimming Pool and Aquatic Related Accidents, Aquatic Accident Reconstruction, Swimming Pools, Spas / Hot Tubs, Waterslides / Aquatic Amusement Rides, Swimming Pool Design / Construction, Swimming Pool Operation / Maintenance, Swimming Pool Equipment, Aquatic Codes and Standard of Care

...Reynolds is a Registered Professional Engineer in 16 states. He has extensive experience designing and overseeing the construction administration of swimming pools and investigating the spectrum of mechanical system and structural failures. Reynolds has designed more than 200 major commercial and residential swimming pools and spas nationwide. In obtaining his Bachelor of Science in Civil Engineering and through his professional experience designing swimming pools and investigating structural failures, Reynolds is accustomed to reviewing the often-complex seismic and geotechnical issues that play a major role in swimming pool projects. As a youth, he swam competitively and played water polo through college, which he later coached at both the high school and collegiate level. He trained as a junior lifeguard then qualified and served as a lifeguard. He is also an experienced swim instructor and aquatic sport camp counselor....

Mechanical Engineering, Real Estate - plumbing, pipe, re-pipe, leaks, failures, Inspection, construction, water damage, feasibility, epoxy liner, CPVC, Aquatherm, PEX, Galvanized, copper, risk assessment, machinery, insurance, defect, standard of care, Blockchain, smart contract adjudication.

Thirty-five years of practical engineering experience across the aerospace, building construction, and technology industries. Bachelors of Science in Mechanical Engineering and Masters degree in International Business Administration. Expert Witness at the intersection of mechanical engineering, business practices, and standard of care.  Technical specialties include plumbing systems (failures, leaks, defects and corrosion), building envelope failures resulting in mold or water damage, Real Estate transactions, mechanical failures due to improper maintenance or operation, Investigation, testing, and report writing. Excellent public speaking skills with the ability to explain complex matters in simple and accessible terms. Knowledgable in recent technologies such as blockchain, digital twin, and digital twin applications for the engineering professions. Experienced in cross border and international engineering practices....

Mechanical Engineering, Motorcycle - ATV, specialty machinery, hydraulic brakes, drive train, zip line brakes, Quads, construction machinery, suspensions, steering, accidents, off road vehicle, side by side, off road tires, theme park ride, utility vehicle, on road vehicle, recreational vehicle, vehicle dynamics, themed show equipment

Degreed mechanical engineer with 30+ years of continuous design experience. Licensed P.E. in CA and NV Extensive experience with: ATV and side by side suspension design, calibration and testing. ATV and side by side steering and brake system and component design and testing. ATV and side by side drive train design and testing. On road truck suspension design. Specialty equipment design. Theme Park Ride design experience Theme Park Ride 3rd party review experience with significant finds. Theme Park Show Equipment design. Zip Line Brake system design. Extensive knowledge of materials, finishes, manufacturing methods. Experienced in stress analysis and rigid body dynamics analysis. Experienced in structural carbon fiber design and analysis.

Energy, Engineering - Solar,PV,Photovoltaics,Energy,Batteries,Construction,Electric Utility,Intellectual Property,Patent,Project Development,Electrical Engineering,Asset Management,Contracts,Electricity,Generation,Renewable Energy,Solar Energy,Solar Power,Solar Installation

...Areas of Expertise: Energy Technologies Solar Batteries & Energy Storage Microgrids Markets Utility-Scale Commercial & Industrial Agricultural Residential Policy Tariff Rates Net Energy Metering (NEM) Interconnection Agreements Finance Incentive Programs & Structures Financing Programs & Structures Project Development Performance Modeling & Simulation Financial Modeling Contract Structures Ownership Models Project Planning & Execution Construction Management Sales Proposals, Pro Formas & Cash Flow Statements Technical Design Project Engineering Owner’s Engineering Independent Engineering System Design & Architecture Control Strategies & Microgrid Operations Project Management Technology Due Diligence Product & Vendor Selection Product Warranties, Guarantees & Liabilities Operations & Maintenance Data Acquisition & Monitoring Codes & Standards Health & Safety National Electrical Code UL Municipal Permits Industry Codes & Standards Solar Rights Act Expert Witness experience: In addition...

Construction, Construction Defects - Contract Compliance, Scope of Work, Cost Analysis, Change Orders, Schedule Delays, Punch Lists, Punchlists, Project Administration, Defects, Permit Inspection, Termination, Architecture, A&E MEP Engineering Design, Specifications, Constructability, Industry Standard Practices, Personal Injury

...Wilson offers 45+ Years of Experience and Expertise in the following Construction Categories: • Structural and Seismic Rehabs, Shell and Core, Base Building, Tenant Improvements, • Prelim Design Drawing Plan Checking & Review, Constructability Analysis, Value Engineering, • Conceptual Estimating and Budgeting, • Bid Solicitations, Contractor Prequalification, Union and Non-Union Considerations, • Plans & Spec Hard Cost Bidding, • Build To Suit & Design Build, • Bid Comparisons, Leveling and Analysis, • Lump Sum, Cost Plus, Time and Material, GMP, Procedures, Requirements, • Contract Documentation, Forms, Details, Exhibits, and Assembly, • Subcontract Documentation, Forms, and Assembly, • Project Commencement Procedures, Documentation, Plans, Schedules, OAC Project Meetings, • Project Management Software, • Permit Filing, Plan Check, Review, Inspections, • RFIs and Submittals, • Jobsite Superintendent, Jobsite Staffing, Assistant Staff, Site Management, Project Engineer, Assistant Project...

Products Liability, Mechanical Engineering - Accident Reconstruction, Failure Analysis, FMEA, Material Characterization and Testing, Material Properties, Metallurgy, Manufacturing, Aviation & Aerospace, 3D printing, Automotive, Slip Trip & Fall, Warnings & Labels, Oil and Gas, Product Development, Laboratories & Testing

Mingxi is a Licensed Professional Mechanical Engineer in the state of California with expertise in materials development and mechanical engineering across a broad range of industries. With a specialty in metallurgy, fracture mechanics and failure analysis, she has experience in materials testing and process development in the aerospace and manufacturing industries, Prior to joining Berkeley Engineering And Research, Inc., she held engineering roles at SpaceX, Virgin Orbit, and Carbon 3D, where she worked on integrating Mil, ASTM, ISO, and NASA specifications into the product development process during transitions from R&D to production. In addition to knowledge of traditional materials and processing methods, she has developed characterization methods for additive manufacturing of metallic and polymeric materials. Her skills take a big picture approach, centering on the intersection of materials science and mechanical design, among other fields....

Hydrology, Civil Engineering - Water Resources, Hydraulics, Floodplain, Flood Forensics, Hydrologist, Hydraulic Modeling, Transportation Drainage, Roadway Drainage, Rainfall, Runoff, Design Storms, Sedimentation, Sediment Transport, Stormwater, Culvert, Stormsewer, Urban Hydrology, Urban Flooding, Construction

...I am an expert in hydrology, hydraulics, the engineering of drainage systems, including culverts, transportation drainage, bridge scour, bridge hydraulics, floodplain management, transportation hydraulics, water resources, and accidental death or drowning near hydraulic structures. My work routinely produces technical evidence that is hard to dispute and easy to understand. My background and experience in consulting and teaching allows me to produce complicated information in a format that is easy to digest, such as video files, and images that explain the complicated physical interactions of hydrology and hydraulics. Some of my past litigation work produced evidence that was not disputed by opposing experts. My approach is to first understand the case, then to discuss one on one what technical aspects are needed, what may be missing or is not yet discovered....

Engineering, Construction - Construction defects litigation, property analysis, rehabilitation, design review, subrogation, allocation, premise liablity, catastrophic claim analysis

...Fronapfel, MSCE, PE, D-IBFES, DFE, CBIE, CFCC, CBCP, EDI, PTI1, F.NAFE, F.ASCE has a Bachelor of Science in Civil Engineering and a Master of Science in Civil Engineering with an emphasis in structural and forensic engineering. Ed's a Certified Level 2 Infrared Thermographer, Certified 3rd Party EIFS Inspector, Certified Forensic Claims Consultant, Board Certified Building Inspection Engineer, and Certified Building Commissioning Professional. He is a registered engineer in the States of AL, AR, AZ, CO, FL, GA, ID, IL, IN, IA, KS, LA,MA, MD, MI, MN, MS, MT, MO, NE, NJ, NV, NM, NC, ND, OH, OK, OR,PA, SC, SD, TN, TX, UT, VA, WA, WI, WV, WY . Edward has been deposed nearly 800 times, and admitted into trial settings over 110 times. He has been used as an expert in arbitration and mediations over 500 times since the late 1990's....

Failure Analysis, Products Liability - Metallurgy, Materials Science, Forensic Engineering, Corrosion, Fatigue, Fracture, Pipe/Tube/PEX/CPVC, Valve, Bolt, Coupling, Boiler, Power Plant, Quality, Weld, Aerial Lift, Hoist, Wire Rope, Fire Protection, Plumbing, Construction Defects

...Anderson is the founder of Advantec Engineering LLC and provides expert consultation, laboratory testing and analysis, and litigation support regarding materials failure analysis, forensic engineering investigations, corrosion, and structural analysis. He has more than forty years of professional engineering experience. Mr. Anderson has provided engineering support and/or testimony for cases involving product liability, industrial accidents and equipment failures, commercial and residential accidents and equipment failures, bridge structures, and aircraft, marine, and vehicle accidents. He has also provided expert testimony and/or litigation support in cases involving flow accelerated corrosion, stress corrosion, corrosion fatigue, pitting, weld defects, and fitness for service of large industrial components, commercial products, and consumer products. Mr....

Mechanical Engineering, HVAC - Appliance malfunctions, Building assessments, Carbon-monoxide incidents, Electrical equipment failures, Fire sprinkler system malfunctions, Forklift/machine accident evaluations, HVAC, HVAC design, Industrial accidents, Pipe failures, Solar panel failures, Wind/flood damage, Winter Freeze-ups.

Provide professional engineering consulting services for the residential, commercial, and industrial sectors. Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. PROFESSIONAL LICENSURE: ~ Registered Professional Engineer: AZ, CA, CO, CT, FL, HI, IL, MA, MD, ME, MI, MN, NC, NH, NJ, NY, NV, OH, PA, RI, VA, VT, & WI ~ Certified Energy Manager (CEM) as endorsed by the Association of Energy Engineers ~ Certified Energy Auditor (CEA) as endorsed by the Association of Energy Engineers ~ LEED Accredited Professional as endorsed by the U. S....

Premises Liability, Construction Defects - OSHA, construction, slips/trips/falls, storm damage, water intrusion, roofing systems, warranty inspections, civil engineering, structural engineering, building collapse, property condition assessment, building codes, forensic engineering, engineering expert, construction accidents, personal injury

Since 2010, the President and Managing Member of CLM Engineering Associates, LLC, which concentrates its focus on forensic engineering/expert witness work for the insurance industry and legal community. In addition, we offer construction management, civil engineering and building inspection services. Prior experience includes extensive construction management work on both commercial and residential projects. Performed safety inspections on both civilian and military projects through application of OSHA regulations. Designed drainage systems for the government while an officer with the United States military. Cost estimating for various projects exceeding $500 million. Design document creation and management of high-rise construction in Manhattan. marketplace. Management of telecommunications projects for Verizon in Manhattan including CPM schedule creation and updating....

Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build

...Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder....

Construction Defects, Construction - Forensic investigation, building pathology, failure analysis, technical reporting, construction claims, litigation support, insurance, building code, EIFs, stucco, building envelope, facades, rainscreen, infrared, moisture, structural capability, energy conservation, contract analysis.

...Matthew Furlong specializes in construction defect and failure analysis, forensic engineering, scientific investigations, technical report writing and expert witness testimony for construction claims and litigation matters. Mr. Furlong has 21 years of experience with construction, project coordination and design, remodeling, and field inspections of building systems for residential, and commercial low and high-rise properties. He has successfully completed more than 600 unique and custom projects while as a general contractor. His builder background experience ranges from high-end new custom home construction, interior renovations and additions, to green building and energy efficient homes, historical renovations, timber-framing, and creating elaborate custom interiors in prestigious estate-sized homes. This experience gives Mr. Furlong the unique qualifications to testify as an expert in construction matters. As a professional consultant, Mr....

Construction Defects, Engineering - Building Enclosures, Exterior Walls and Cladding Systems, Fenestrations and Glazing Systems, Waterproofing Systems, Roofing Systems, Water Intrusion Investigations, and Wind Damage Investigations

I am a Professional Engineer and a Certified General Contractor with 20 years of consulting and engineering experience, specializing in the design, evaluation, inspection, and testing of building envelope systems, including exterior wall claddings, glazing systems, fenestrations, waterproofing systems, and roofing systems, for new and existing structures. I am a member of various industry organizations and an accredited LEED professional. I have worked on hundreds of projects throughout North America and the Caribbean. I enjoy providing technical expertise on all types of building projects to develop and construct high-performance building enclosure systems. I have extensive experience conducting forensic evaluations on buildings with envelope performance problems, which often lead to remedial design and management of restoration programs and expert witness testimony.

Structural Engineering, Building Inspection - Structural failures, structural engineering, Structural design, design errors, structural inspections, building collapse, building codes, structural repairs, forensic engineering, special inspector, special inspection, threshold inspection

...Barrow has been practicing structural engineering for the past 35 years. He founded Barrow Engineering, LLC which focuses on forensic engineering and the associated repairs and claim investigations. Mr. Barrow has performed numerous forensic investigations involving structural failures, design deficiencies, faulty construction, construction pay applications, failure to disclose defects, grading issues, cladding failures, roof damage, site plans, pool leaks, water intrusion, fire, wind, subsidence, and vehicular impact. Design of shoring, and other remedial actions have been provided as part of forensic projects where there are conditions that may become unsafe or need repair. Mr. Barrow is experienced in insurance claim work, litigation, and testimony involving legal issues. He has testified under oath in court and in depositions and has presented at mediation and arbitration hearings. Prior to Barrow Engineering, LLC, Mr....

Transportation, Safety - Slip Trip & Fall, Pedestrian & Bicycle Safety, Railroad Safety, Bus Safety, Biomechanics & Human Factors, FELA & OSHA, Elevators & Escalators, Traffic Engineering, Transportation Engineering, Transportation Safety, Transportation Rules & Regulations, Transportation Expert Witness

...Berkowitz has extensive multi-modal experience in planning, design, engineering, safety, security, construction, maintenance, operations and management. Dr. Berkowitz has written and edited numerous reports, studies, articles and columns for major publications, journals, newspapers and scholarly periodicals....

Structural Engineering, Construction Engineering - Structural Failure / Collapse, Structural design, Structural Analysis, Structural Inspections, Building Code Analysis, Construction Defects, Forensic Engineering, Hurricane Engineering, Failure Analysis, Wind Engineering, Flood Engineering

...Bradford has been a practicing structural engineer for the past 27 years. Dr. Bradford is the president and founder of TSG Engineering, located in Tampa, Florida. TSG Engineering provides structural engineering for new construction projects as well as forensic investigations. Since our inception as The Structures Group, Inc. in 1999, we have worked on over 9,000 projects. In the area of new construction, we provide structural engineering for projects in the areas of custom residential, production builder residential, multi-family residential, retail/commercial construction, churches, industrial facilities and warehouses. We provide specialty structural engineering services such as controlled demolition and accessory structures (stairs, handrails, light poles). Our engineering projects include coastal construction projects involving high wind loading, wave loading, flooding, and scour analysis....

Transportation, Safety - FMCSA, FMCSR, DOT, OSHA, Tank Truck, Loading, Unloading, Forklifts, Driver Qualifications, Drug & Alcohol, Hours of Service, Hazardous Materials, Training, Standard of Care, Vehicle Inspection, Fleet Safety, Commercial Drivers, CDL, Driver Hiring Standards, Record Retention, ELD, Cargo, Accidents

...Here he established and managed the corporation’s Safety, Training and Risk Management and Claims Departments with a staff of 20+ professional Safety Engineers and trainers, 5 licensed claims adjusters and 8 clerical staff members. He has specialized training from the U.S. DOT, Office of Motor Carrier Safety, Environmental Protection Agency, Penn State University, OSHA, Northwestern University, Purdue University, Georgia Tech, and University of South Florida to name a few. In April 1995, he was one of 200 North American Safety Experts invited to participate in President Clinton’s 1994 Tank & Bus Safety Summit held in Kansas City, Missouri, to develop and propose new safety legislation. In April of 1995, the National Tank Truck Association honored him for his achievements in safety....

Civil Engineering, Structural Engineering - Property Damages/Loss Consultant, Moisture Intrusion Cause & Origin, Construction Defects & Delays, Construction Claims Consultant, Flooding Root Cause & Damages, Building Consultant, Pavements & Parking Lots, Real Estate Due Diligence, Stormwater & Drainage Consultant, Storms/Disaster Damages

Licenced Professional Engineer in the following states: Virginia District of Columbus Maryland Florida Georgia Texas North Carolina South Carolina West Virginia Kentucky Tennessee Alabama Mississippi

Construction, Premises Liability - Defects, personal injury, insurance, codes, commercial, residential, accidents, falls, asbestos, ADA, sewer, water, liability, damages, general contractor, fire, flood, contracts, subcontractors, engineer

...General Contractor - President of Buckhead Classic (2006 – presen): Projects include defective construction repair, new construction, fire and floods, structural defects, water damage, offices, demolition, sewer, water, drainage, and historic structures. Owner/Developer and General Contractor – President, MilbCorp. (1984 – 2014): Projects include condominiums, roads and drainage, zoning, subdivisions, sewer, outfalls, water, drainage, for-sale homes, energy compliance, and professional offices, with cradle-to-grave responsibility for all projects. Education: University of North Carolina at Chapel Hill - Economics and English, Summa Cum Laude Johnston Scholar, Phi Beta Kappa - 1983. Thesis on Disintermediation and Economic Cycles received Highest Honors The Westminster Schools – 1979. Cum Laude, recipient of Special Award for Service, awarded only in select years....

Structural Engineering, Construction Engineering

...Diaz has more than 10 years of experience providing structural engineering design, construction administration, and forensic services to private-sector clients on a wide range of projects. As a forensic engineer, Rossana investigates structural failures, building construction defects, and code compliance on behalf of attorneys, and insurance companies. Rossana’s design portfolio includes development, from conceptual design and plan preparation through construction and final inspection. Her areas of expertise include building castin-place concrete, steel, masonry, and timber design for commercial and residential structures, educational and hospitality facilities, marinas, and industrial plants.

Structural Engineering, Construction Defects - Building Inspections, UAS (Drone) Inspections, Post-tensioning, Doors and Windows, Building Enclosures & Cladding, Waterproofing, Roofing, Insurance Claims, Wind & Water Damage, Stucco

...Duckstein has over 22 years of experience designing, constructing, and inspecting civil and structural projects. He is a results-oriented consultant with extensive experience in construction defect litigation support and expertise in commercial UAS “drone” operations in central/south Florida. He has a proven track record of providing high-level technical analysis and support for complex projects. His experience includes design and field support for south FL water-control structures and leading movable and fixed bridge inspections on the Ohio, Mississippi, Hudson, and St. Clair rivers.

Construction, Premises Liability - Appraisal & Valuation, Arbitration/Mediation, Building Inspection, Construction, Construction Defects, Environmental, Indoor Air Quality, Mold, OSHA, Premises Liability, Safety, Slip Trip & Fall

...Number 30003330 Georgia Insurance Non-Resident Casualty & Property Adjuster #763839 IAUA Certified Property Appraiser & Umpire (CPAU) Xactimate Estimating Software user since 2004 Construction: National Floor Safety Institute (NFSI), since 2020 State of Florida Certified General Contractor CGC 020554 since 1981 State of Florida Certified Roofing Contractor CCC 056639 since 1992 State of Florida Certified Home Inspector #HI1006 Equivalent Certification to Design Professional for Engineering of One or Two-Family Structures under FS 489.115(4) (b) & Florida Building Code 104.2.2.1 EPA Certified Lead Renovator Certification No. R-I-8865-10-10166 by the Environmental Management Institute, Inc....

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Building Inspection, Appraisal & Valuation - General contractor, roofing contractor, plumbing contractor, mold assessor, mold remediator, insurance adjuster, wind damage, hurricane damage, tile roof, plumbing, cause & origin, water intrusion, storm created openings, residential, commercial, industrial, mitigation, estimating, scope & pricing

...Evaluated residential, commercial, and governmental structures, buildings, roads, parks, and golf courses. Experience with losses including fire, water, vandalism, vehicle impact, theft, mold, and sinkholes. Regularly inspect, investigate, and document losses and advise client of scope and proper reserve amounts. Recommend client if further investigation is required by experts and set appropriate reserve amounts. Obtain recorded statements with public adjusters and/or attorneys present, when necessary. Prepare thorough and professional itemized estimates utilizing the Xactimate Estimating System, XactAnalysis, Symbility, and/or MSB Integri-claim DDS. Proficient with CMS, CTS, iLogs, and ImageRight systems - claims management software. Review policy and applicable forms to determine coverage and also review any prior claims history. Continually interact with insured(s), public adjuster(s), consultant(s), engineer(s) and attorney(s)....

Structural Engineering, Construction Defects - Building Inspection, construction, civil engineering, milestone inspections, structural integrity inspections, Building Enclosures, Exterior Walls and Cladding Systems, Waterproofing Systems, Roofing Systems, Water Intrusion Investigations

...Harvey-Lewis has more than 17 years of experience providing structural engineering design, construction administration, and forensic services to public and private-sector clients on various projects. As a forensic engineer, Scott investigates structural failures, building construction defects, and code compliance on behalf of attorneys, owners, developers, and insurance companies. Scott’s design portfolio includes significant phases of project development, from conceptual design and plan preparation through construction and final inspection. His expertise includes building envelope systems, cast-in-place concrete, steel, masonry, and timber design for commercial and residential structures, telecommunication and educational facilities, marinas, industrial plants, warehouses, storage and containment, and land development.

Construction Defects, Structural Engineering - Building Construction, Building Envelope, Building Forensics, Concrete, Construction, Construction Accident, Foundations Building, High-rise Building Construction Analysis, Hurricane Damage, Parking Decks, Personal Injury Building, Structural Steel, Construction Contract Administration

...Head has more than 40 years of structural engineering analysis, design and project/construction management experience throughout Saudi Arabia and the United States ranging from the design of new facilities, strengthening, renovation, retrofitting and repair of existing structures in the GMP, Design/Bid and Design/Bid/Build delivery method and conducting forensic investigations as an Expert Witness. He has been primarily engaged in the design and construction of building structures. During that time he has seen the good and the bad, what works and what doesn't and has seen the design and the construction processes change dramatically. Mr....

Engineering - Mechanical Engineering, Electrical Engineering, Structural Engineering, and Forensic Engineering

M2E Consulting Engineers is a full service Mechanical, Electrical, Plumbing, and Structural Engineering Firm located in South Miami, Florida and services the tri-county area. The Firm specializes in design and forensic engineering services, thus our clients benefit from the combination of those two skill sets. Our constant exposure to construction and development problems in our forensics practice allows us to sharpen our design skills on a daily basis, and our design experience completes our problem solving tools in our forensics tasks. The overall benefit comes in the form of a quality, efficient, and effective design. M2E has a track record of successfully completed real estate projects. The Firm also provides real estate owners, developers, contractors, condominium associations, and management companies throughout the country with plan review, construction observations, due diligence inspections and reporting services....

Construction, Engineering - Opinion of Probable Cost (All Construction Disciplines), Electrical Engineering, Forensic Engineering, Construction Defects, Construction Claims & Construction Management

Jose Roman Ramos “Roman” has nearly ten years of experience in project estimating, construction, and inspection of civil, electrical, and structural projects. He has successfully estimated multi-million commercial and residential projects. His early field experience allows him to estimate not only the hard costs of a project but soft costs too. Roman’s expertise extends to construction and restoration management, forensic investigations, and commercial UAS “drone” flight inspections in South Florida. As a multi-disciplinary engineer, Roman’s areas of expertise include concrete, electrical, steel, and masonry design, construction defect inspections, and building code forensic services for commercial and residential structures from the ground and air.

Electrical Engineering, Construction Defects - Construction Defects of Electrical, Fire Alarm, Lighting, and Telecommunications Systems in Commercial and Residential buildings, including Condominiums, Laboratories, Museums, Office Towers, and University Campuses

**Providing Electrical Engineering Expert Witness services in Arizona, California, and New York only** Nicholas Strachan is a licensed Professional Engineer (Electrical) in Arizona, California, and New York, and a licensed Plans Examiner in Florida. He has over 25 years of experience in engineering design and quality assurance inspections of electrical systems for construction projects in the US and abroad. These projects included commercial and residential structures, laboratories and higher educational facilities, museums and cultural facilities, and sports arenas. His technical knowledge and experience are predominantly focused on electrical, fire alarm, lighting, and telecommunication systems’ design in new and existing buildings. Nicholas has more recently provided Expert Witness testimony and construction litigation support.

Construction, Premises Liability - Defects, personal injury, insurance, codes, commercial, residential, accidents, falls, asbestos, ADA, sewer, water, liability, damages, general contractor, fire, flood, contracts, subcontractors, engineer

...General Contractor - President of Buckhead Classic (2006 – presen): Projects include defective construction repair, new construction, fire and floods, structural defects, water damage, offices, demolition, sewer, water, drainage, and historic structures. Owner/Developer and General Contractor – President, MilbCorp. (1984 – 2014): Projects include condominiums, roads and drainage, zoning, subdivisions, sewer, outfalls, water, drainage, for-sale homes, energy compliance, and professional offices, with cradle-to-grave responsibility for all projects. Education: University of North Carolina at Chapel Hill - Economics and English, Summa Cum Laude Johnston Scholar, Phi Beta Kappa - 1983. Thesis on Disintermediation and Economic Cycles received Highest Honors The Westminster Schools – 1979. Cum Laude, recipient of Special Award for Service, awarded only in select years....

Engineering, Construction - Civil, structural and construction engineering consultant, specializing in the evaluation of construction defects. Provides expert witness testimony for defects, building foundations, roofing systems, drainage concerns, building envelope leaks, structural systems, ADA, trip and fall cases.

...Davis is a Registered Professional Engineer in Georgia and has been practicing engineering since 1993. She provides expert witness testimony for all clients to include both plaintiffs and defendants. Her background includes 17 years with the US Army and extensive, hands-on construction experience. She is a member of the National Academy of Forensic Engineers, American Society of Civil Engineers, Society of American Military Engineers, National Society of Professional Engineers, Georgia Society of Professional Engineers, Institute of Roofing, ASTM International, Order of the Engineer and Chi Epsilon Civil Engineering Honor Society.

Construction Defects, Structural Engineering - Building Construction, Building Envelope, Building Forensics, Concrete, Construction, Construction Accident, Foundations Building, High-rise Building Construction Analysis, Hurricane Damage, Parking Decks, Personal Injury Building, Structural Steel, Construction Contract Administration

...Head has more than 40 years of structural engineering analysis, design and project/construction management experience throughout Saudi Arabia and the United States ranging from the design of new facilities, strengthening, renovation, retrofitting and repair of existing structures in the GMP, Design/Bid and Design/Bid/Build delivery method and conducting forensic investigations as an Expert Witness. He has been primarily engaged in the design and construction of building structures. During that time he has seen the good and the bad, what works and what doesn't and has seen the design and the construction processes change dramatically. Mr....

Maritime, Engineering - Marine Engineering, Loss of propulsion, Engine Failure, Bunker Fuels, Allisions, Fire Investigations, Equipment Failures, OWS

...Daly is an accomplished marine engineer with nearly 40 years of experience in the maritime industry. Mr. Daly has been contracted as an expert witness on behalf of vessel owners and other interested parties and as a consulting expert on behalf underwriters and on behalf of the U.S. Department of Justice. Mr. Daly is a marine surveyor and the owner of, and principal surveyor for, Daly Marine Services LLC. Daly Marine Services LLC specializes in Hull & Machinery surveys. He has conducted investigations and reported on issues including loss of propulsion, engine failures, fuel quality disputes and fuel related casualties, equipment failures, machinery space fires, structural damage, vessel sinkings, emission cases, personal injuries and other casualties on behalf of ship owners and underwriters....

Civil Engineering, Construction Engineering - Right-of-Way, Grading & Drainage, Hillside Homes, Due Diligence, Inverse Condemnation, Construction Defects, Wood Engineering, High-end Homes, Eminent Domain, Residential Structural, Land Use & Zoning, Permitting & Entitlements, Road & Highway Design, Land Use Planning, Local Government, Forensics

...Wall possesses the ideal skill set for Expert Witness work, grounded in his pursuit of lifelong learning, business acumen, Civil Engineering practice, graduate level forensic research and writing, and entrepreneurial mastery. This superlative skill set gives Mr. Wall the ability to write high impact Expert Reports and provide expert testimony that explains complex concepts in plain easy to understand language that settles cases. Mr. Wall serves as an Expert Witness, Forensic Engineer, and Consulting Engineer for the Civil and Structural Engineering, Land Planning, and Construction industries. As a Professional Civil Engineer and Educator, Mr. Wall utilizes his experience to provide high quality professional consulting services....

Human Factors, Safety - Applied Human Performance, Ergonomics, Human Behavior, Human Capabilities, Human Limitations, Air-and-Surface Vehicle Control, Slips, trips, and falls, Safety Evaluations, Instructions and Warnings, Human/Machine Interface, Expert Testimony, Accident Investigation

...Dave Curry is the Chief Scientist and Principal Consultant for the Human Factors and Safety practice area of the Solution Engineering Group. He consults on all aspects of human factors, applied human performance, ergonomics, and safety. Areas of particular expertise include: human-machine interface design and evaluation, human capabilities and limitations in applied environments, industrial ergonomics, instructions and warnings, perception/vision/visibility, slips/trips/falls, the evaluation of equipment/facilities/structures from a human use standpoint, and safety-related issues in general. He is recognized as an expert in operator-vehicle interaction and is a Certified Human Factors Professional. He is the author of over fifty technical papers dealing with various issues relating to applied human performance, safety, and accident investigation....

Engineering, Failure Analysis - Structural Engineering, Construction defects, water infiltration, storm damage, fire damage, explosion damage, structural collapse, failure of temporary shoring, construction site accidents, roofing failure, windows, handrail failures, masonry, concrete, steel, failure analysis, façade failure

...My expert witness experience includes cases dealing with issues such as defective construction, water infiltration, storm/fire/explosion damage assessment, structural collapse, failure of temporary shoring, construction site accidents, roofing failure, improper design and manfacture of windows and handrail failures.

Structural Engineering, Building Inspection - Parking Structures, Concrete Cracking, Concrete Deterioration, Leak Analysis, Waterproofing, Corrosion Damage, Precast Concrete, Post-Tensioned Concrete, Post-Tensioning Failure, Expansion Joint, Deck Coating, Construction Defects

...Kennedy's practice is focused on condition assessments, damage assessments, repair design, forensic investigations and expert witness consulting related to concrete parking structures, building facades, and other exterior-exposed facilities. Other related areas of expertise include structural strengthening design utilizing CFRP & GFRP, waterproofing design and leak investigations and corrosion control methods such as corrosion inhibitive treatments and cathodic protection. Mr. Kennedy has over 20 years of structural engineering consulting experience and over 15 years of construction management experience, with the majority of that focused on repair and renovation of structures.

Energy, Intellectual Property - Intellectual Property, Appraisals & Valuations, Commercial Damages, Renewable Energy, Biogas, Biofuels, Wind, Solar, Geothermal, Biomass, Waste-to-Energy, Oil & Gas, Oil Refining, Fires, Explosions, Chemical Release, Product Contamination, Electricity, Coal Technologies, Chemistry & Chemicals

...Williams is a recognized expert in the engineering analysis and financial appraisals of energy, electricity, and process technologies; and intellectual property (patents, trade secrets, proprietary technology), licensing, royalty structures, market analysis, infringement, invalidity, pricing economics, and lost profit damages. Dr. Williams provides expert engineering, detailed technical and financial appraisals, licensing and royalties analysis, quantification of damages, litigation support, due diligence, and understandable testimony involving renewable energies including biogas, ethanol and butanol biofuels, wind, solar, geothermal, biomass and waste-to-energy; oil and gas, petroleum refining, and storage; electrical power generation, trading, and storage; and coal, char, steel and metals, agricultural and chemicals technologies. Dr. Williams analyzes the complex and expresses it in understandable technical, environmental, and financial terms. Dr....

Aviation & Aerospace, Engineering - Aerospace, Aviation, Engineering, Aircraft Design, Aerodynamics, Structures, Smart Structures, Stability and Control, Propulsion, UAV, UAM and UAS, Drone, Missile, Munition, Helicopter, Electric Flight, Flying Toys, Flight Testing, Aircraft Crashworthiness, Cost Analysis, Patents

I am a Full Professor of Aerospace Engineering at the University of Kansas (KU) and Director of the Aircraft Design Laboratory (ADL). When not working for the university, I run a small business, Barrett Aerospace Technologies, which is typically centered on transitioning KU technologies to the commercial world. • Winner of the Discover Magazine Award for Aerospace and Aviation • Led more award winning American Institute of Aeronautics and Astronautics (AIAA) Aircraft and Missile Design teams than any other in the world • Associate Fellow, AIAA • Listed by Stanford/Elsevier as one of the world’s top 2% most cited Technologists • Most cited member of the AIAA Aircraft Design Technical Committee • Published more than 400 professional works • Holder of 20 patents • Worked on projects for all of the branches of the US DoD, NASA, NSF, DARPA, all major US aerospace corporations and many minor....

Structural Engineering, Construction Defects - Codes, Concrete Failures, Steel Failures, Masonry Failures, Wood Failures, Corrosion, Seismic Design, Wind Design, Partial/Full Collapse, Prestressed Concrete, Post-tensioned Concrete, Facade performance, Cladding Failures, Vibration, Timber Construction, Timber Decay, Wood Decay, Tall Buildings

As an engineer, I am fascinated by complexity and understanding new and different situations. I love to talk about engineering and explaining engineering processes and principles to young engineers and lay persons is personal passion. Examining a structural failure brings out my inner researcher, and explaining the cause and physics to a jury or arbitration panel channels my teacher personality. I work as a forensic engineer with the intent of helping the legal industry understand engineering principles and to help citizens resolve their disputes justly. Though I have worked as a scientific programmer and chemical engineer, my primary expertise is in structural engineering. I began professional practice at kpff in Portland, OR in 1998. In 2001, I was hired by DCI Engineers. In 2003, I started my own consulting engineering firm which I continue to operate. I have designed concrete, steel, masonry and wood structures, generally commercial, government or schools....

Structural Engineering, Geotechnical Engineering - investigative engineering, forensic engineering

Structural Engineering, Civil Engineering - civil, railroad, accident, cranes, failures, foundations, structures, drainage, culverts, washouts, hydrology, concrete pump trucks, corrosion, chemical, industrial, building codes, inspections, construction, OSHA Compliance, swimming pools, structural, tornado, earthquake, railroad, highway, stone

...Hlinka has worked over 40 years in the Engineering, Procurement and Construction Management market with experience in numerous industries: Chemical, Oil Refinery, Pulp & Paper, Adhesives, Nuclear Power Generation, Nuclear Feed Stock, and Steel. His work has overlapped with residential and commercial industries. Throughout his career he has engineered and managed a myriad of projects in these industries and has provided leadership to the various companies in the capacities of: Site Manager, Design Manager, Project Manager, Construction Supervisor, and currently as President. Design engineering, analysis, and inspection experience includes structural steel, reinforced concrete, stone, masonry, wood, and stormwater drainage.

Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build

...Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder....

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation

...Kiddy is a principle at Aither Forensics Engineering, LLC, a forensics consulting firm located in central Maryland. Dr. Kiddy spent over 20 years in various industries prior to becoming a full-time expert witness providing a broad industry experience base from which to draw extensive knowledge on a wide variety of topics. Dr. Kiddy's work experience includes the oil and gas industry, aircraft and helicopter design, marine structures, wind turbines, and telecommunications. From a technical perspective, Dr. Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr....

Structural Engineering, Civil Engineering - Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis

Civil/Structural Engineering Construction Defects Building Codes OSHA Failure Analysis Strength of Materials Concrete/Steel/Wood/Masonry Design Concrete/Steel/Wood/Masonry Analysis Seismic Design and Analysis Wind Design and Analysis Foundations and Retaining Structures Grading and Soil Properties Field Repair Designs Stormwater Management Component/Connection Design and Analysis Construction Cost Estimates Building Envelope (Moisture Barriers) Construction Management Registered Professional Engineer, State of New York, License No.087752 Registered Professional Engineer, State of Maryland, License No.42640 Registered Professional Engineer, Commonwealth of Virginia, License No.051210 Registered Professional Engineer, State of New Jersey, License No.24GE05239300

HVAC, Plumbing - Mechanical, HVAC, Heating, Plumbing, Building Systems, Freeze Losses, Pipe Failures, Water Heating, Appliance Failures, Water Leaks, Combustion Equipment, Building Assessments, Damage Assessments, Cost Estimates, Energy, Ventilation, Air Conditioning and Cooling, Process Systems, Product Liability

Licensed Professional Engineer: MA, CT, RI, ME, NH, VT, PA. Provided Forensic Engineering Services on hundreds of cases with a specific focus in the areas of Building Systems and Equipment, Heating Ventilation and Air Conditioning (HVAC), Failure Analysis of Mechanical Systems and Components, Failure Modes & Effects Analysis, Energy Systems, Industrial Process Systems. Substantial experience in the Design and Manufacturing of Mechanical Systems and Components. Design and Operation of Energy Systems and Power Plants, including Nuclear, Fossil and Renewable Energy. Also provide services in the areas of Project Management and Construction Administration for the entire duration of a project or on an interim basis, or for the purposes of Claim Damage Mitigation. Detailed knowledge of Construction Management Processes and Organizational Structure. U.S. Patent: 7,631,820 B2 Experienced Arbitrator for FINRA and Massachusetts Office of Consumer Affairs and Business Regulation.

Mechanical Engineering, HVAC - Appliance malfunctions, Building assessments, Carbon-monoxide incidents, Electrical equipment failures, Fire sprinkler system malfunctions, Forklift/machine accident evaluations, HVAC, HVAC design, Industrial accidents, Pipe failures, Solar panel failures, Wind/flood damage, Winter Freeze-ups.

Provide professional engineering consulting services for the residential, commercial, and industrial sectors. Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. PROFESSIONAL LICENSURE: ~ Registered Professional Engineer: AZ, CA, CO, CT, FL, HI, IL, MA, MD, ME, MI, MN, NC, NH, NJ, NY, NV, OH, PA, RI, VA, VT, & WI ~ Certified Energy Manager (CEM) as endorsed by the Association of Energy Engineers ~ Certified Energy Auditor (CEA) as endorsed by the Association of Energy Engineers ~ LEED Accredited Professional as endorsed by the U. S....

Chemical Engineering, Failure Analysis - polymer, plastic, rubber, coating, materials, material science, material engineering, thermoplastic, thermoset, composite, design, manufacturing, adhesive, ink, automotive, medical device, aerospace, packaging, accident, defect

...He specializes in material structure, properties, and processing. His work emphasizes thermoplastics, thermosets, blends, composites, and multicomponent formulations. He has extensive experience with manufacturing, product development, product design, and failure analysis. Systems investigated include plastics, composites, coatings, paints, adhesives, rubbers, fibers, suspensions, emulsions, and pastes. In particular, Dr. Scott has published extensively on the topics of polymer processing and structure relationships, compounding and mixing in multiphase polymer systems, and structure and morphology development during polymer processing. He is the inventor on 11 U.S. patents, author of more than 30 articles in peer reviewed journals, author of 40 conference proceedings, and has presented more than 50 seminars to industry and government organizations. Dr....

Architecture, Construction Defects - Forensic Architect, Building Inspection, Architectural Professional Liability, Water Intrusion & Damage, ADA Consulting, Slip Trip and Fall, Building Code, Building Envelope, Waterproofing, Roofs, Fenestration, Construction Administration, Construction Standards, Standard of Care, Design Errors

...Provide quality assurance, evaluation and observation of in-progress construction of commercial and residential structures for conformance to design, material and workmanship standards. Provide expert services for Architecturally related personal Injury matters. NCARB National Council of Architectural Registration Boards Certified Certified as a Building Official by the Council of American Building Officials. Certified as a Building Official, Master Plans Examiner, Building Inspector, Plumbing Inspector and Residential Building Official by the State of Ohio. Numerous Ohio Board of Building Standards Approved Courses and Presenter. Appearances and testimony before the Ohio Board of Building Appeals. Professional Experience Principle Architect in a firm established in 1983, providing design services on a wide range of projects, including civic, recreational, commercial, educational, medical, and code consultation work....

Mechanical Engineering, Accident Reconstruction - Automotive, Vehicle Fires, Crash Data, Failure Analysis, Origin and Cause, Vehicle Mechanical, Farm Equipment, CDR, EDR, Heavy Truck Data, Motorcycle Crash, Infotainment

I am a Licensed Professional Engineer in ten states with over twenty-nine years combined experience in materials research, mechanical engineering and design, crash testing research and crash investigation and reconstruction, vehicle fire research and investigation, automotive mechanics and forensic mechanical and materials investigation. I hold degrees in mechanical engineering (BS) and materials science and engineering (MS). I work on a wide variety of forensic mechanical and forensic metallurgical investigations. These investigations have included but are not limited to an elevator failure involving materials and design issues, a personal injury involving a paper shredder, multiple cases involving farm equipment and personal injuries, machine guarding cases, chair collapse cases, bolted joint failures, patient lifter failures, vehicle hand control issues, and tipped telehandler and boom crane cases....

Engineering, Premises Liability - Civil Engineering, Fall Protection, Construction, Analysis, Industrial Safety including OSHA and NFPA. See www.peginc.biz for Structural Engineering, Environmental Engineering, Geo technical Engineering, Mechanical Engineering and Electrical Engineering.

PEG, Inc. offers consultation and expert testimony in many specialized areas, such as the following: Accident Reconstruction & Investigations Building Codes Concrete Failures Construction & Environmental Construction Equipment Accidents Construction Safety & Related Codes Cooling Towers & Hydraulics Electrical Engineering Excavation, Blasting & Trenching Exhibit Reconstruction & Investigations Fall Protection Highway & Transportation Problems Mechanical Engineering Metallurgy & Welding / Failure Studies OSHA Issues Paints, Coatings & Lead Abatement Premise Liability Product Failure & Liability Issues Safety Issues (Construction, Industrial & Product) Slips, Trips & Falls Software Engineering Studies Structural Steel & Building Failure Studies

Civil Engineering, Structural Engineering - zipline engineering, zip lines, aerial adventure challenge courses, ASTM, structure fire repair design evaluation, NAARSO, ACCT, wood structures, amusement ride inspections, pre manufactured wood trusses, ASTM F2959, IBC wind snow seismic design

...Krupa is a principal engineer at K2 Engineering and Structural Design, LLC (K2). He holds a Bachelor of Science degree in Civil Engineering from the University of Nevada, Reno, and Professional Engineering licenses in multiple US states. Jared started his structural engineering career in 1999 and has since advanced his profession into more specialized fields such as the amusement ride industry and design/analysis of buildings damaged by fire. Founded in February 2005, K2 is a medium-sized engineering firm located in Reno, Nevada, that focuses on the structural design of commercial buildings, residential homes, and amusement rides and attractions. K2 provides quality engineering services to architects, designers, owners, building contractors and developers with a focus on efficiency and constructability. K2’s staff has over 60 years of experience in the design of projects both large and small in Northern California, Northern Nevada and Lake Tahoe....

Failure Analysis, Safety - Welding Engineering, Weld Failures, Welding Design, Industrial Safety, 3D Printing of Metals, Welding, Welding Safety, Inspection, Welding Metallurgy, Welding Defects, Torch cutting, Forensics, Codes Compliance, Non-Destructive Testing, Manufacturing, Marine, Navy, Aerospace, Military, ASME, AWS

...Foster is the Principal Engineer at Expert Welding Engineering and Inspection, where he focuses on welding engineering consulting, inspection, and the training of engineers and technicians. Dr. Foster is an expert in regard to the design, manufacture, testing, and safety associated with welded structures. In addition to Dr. Foster’s significant experience in the field of welding engineering in both academia and industry, Dr. Foster possesses a BS, MS, and PhD in Welding Engineering. Strongly dedicated to his craft, Dr. Foster has earned multiple certifications related to fields of welding engineering and inspection. These certifications include Certified Welder (CW), Certified Welding Inspector (CWI), Certified Welding Supervisor (CWS), Certified NDT Level III Inspector (NDT III) and Licensed Professional Engineer (PE), all of which have prepared Dr. Foster exceptionally well to properly analyze failures and other welding problems that are the subject of litigation. Dr....

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client....

Construction Defects, Architecture - stucco, building envelope, architecture, ADA, moisture intrusion, WUFI analysis, space frames, stairways, windows, building codes, roofing, delay claims, vapor barriers, air barriers, slip trip & fall, OSHA

...His career has included: full time work for a structural systems (space-frames) manufacturer, doing project engineering and later management; management of a hundred person architecture, engineering, landscape architecture, interior design firm; capital budgeting and owner led improvements of city government buildings; and the independent practice of architecture. Direct hands on experience includes construction inspections across North America, CADD contract documents, 3D computer modeling and animations. Management experience includes capital budgeting, project management and firm management. He is a voting member of ASTM Committee E:06 Performance of Buildings. He can bring building sciences to the table, as he has attended many WUFI advanced seminars and RCI conventions.. He started expert witness work in 2004 and has been a player in cases from ADA to trip and fall to architectural malpractice.

Structural Engineering, Building Inspection - Forensic Engineering, Structural Failure, Construction Issues, Special Inspections, Building Evaluation, Building Defects, Trips and Falls, Building Preservation, Building Repair, Retaining Walls, Foundations, Building Codes

...Alvi, PE is a Civil, Structural, and Forensic Engineering Consultant, and Principal of za/engineering. He is a graduate of State University of New York, Farmingdale State College, and holds a dual Bachelors of Science degree in Architectural Technology and Construction Management, along with an Engineering Leadership Certificate from Cornell University, and earned his Master of Engineering from SUNY Buffalo. He is a Licensed Professional Engineer (P.E.) and maintain licensure in New York and multiple other states. He has extensive experience in the evaluation, repair, and rehabilitation of existing structures and historic buildings, verifying construction compliance with applicable building codes and contract specifications, evaluating impact of construction errors, change orders, and damages during construction....

Engineering, Forensic Science - Forensic Engineering, Building Structures and Systems, Structural Engineering, Mechanical Engineering, Civil Engineering, Foundations, HVAC, Plumbing, Electrical, Construction, Construction Defects, Investigations, Fires, Floods, Insurance, Property Casualty, Disaster Recovery, Premises Liability.

Expert Engineering Staff with Interdisciplinary Experience Client base consists of Insurance Professionals, Building Owners, and Attorneys representing Plaintiff's and Defendants. Retained as Experts in Over 10,000 cases. National Academy of Forensic Engineers Certified Safety Professional Certified Fire and Explosion Investigator National Society of Professional Engineers American Society of Civil Engineers American Society of Mechanical Engineers OSHA and Suspended Scaffold Certifications New York City Special Inspection Agency Licensed in New York, New Jersey, Pennsylvania, Connecticut, Florida, US Virgin Islands Qualified as Experts in State Supreme and Federal Courts FAA Certified Drone Pilot

Structural Engineering, Construction Defects - Construction, construction site safety, concrete, open web joist, light gage steel, underpinning, mechanical engineering, product defects, failure analysis, finite elements, design build

...Bramel has over 30 years of broad Engineering experience in all aspects of the construction process: from design through construction and service. Dr. Bramel has effectively served as an Expert Witness and a litigation advisor on hundreds of cases in the past 10 years. He has advised in Construction Defect, Building and Material Failures, Product Liability, Personal Injury, Construction Work Site Injuries, Multi-Employer Worksite Matters, as well as building code compliance and insurance claims throughout the mid-Atlantic region. His expertise in Civil, Mechanical, and Structural Engineering allows a broad perspective of potential matters beyond the traditional Engineering solutions. Dr. Bramel is a practicing Licensed Professional Engineer in Virginia, Maryland, West Virginia, Pennsylvania, Ohio, New York, and Delaware, a practicing Licensed Structural Engineer in Washington, D.C., and a Model PE NCEES record holder....

Failure Analysis, Metallurgy - Weld Failures, Welding Safety, Welding Processes, Weld Inspection and testing, Weld Engineering, Weld Metallurgy, Brazing and soldering, Manufacturing Weld Defects, Weld Structural Fabrication, Pipeline Weld Failures, Welding Codes Compliance, Construction Weld Failures, Welding Consulting

I have been an independent welding consultant since 1992, with 30+ years experience in the welding industry involving research and development and industrial applications of welding procedure qualifications of record, welding procedure specifications, welding fabrication, welder performance qualifications, nondestructive and destructive inspection and testing of welds, and weld failure analysis. As a consulting and testifying expert witness I have been qualified by Courts in several states; and have been retained by both plaintiffs and defendants for lawsuits involving product liability, manufacturing defects, personal injury and code compliance. I hold degrees in Welding Technology, Mathematics and Science; in addition to college level teaching credentials in the field of welding. Previous employment includes positions with the United States Department of Energy (DOE) and the Naval Nuclear Propulsion Laboratory; these positions required a high level security "Q" clearance. I have been...

Mechanical Engineering, HVAC - Appliance malfunctions, Building assessments, Carbon-monoxide incidents, Electrical equipment failures, Fire sprinkler system malfunctions, Forklift/machine accident evaluations, HVAC, HVAC design, Industrial accidents, Pipe failures, Solar panel failures, Wind/flood damage, Winter Freeze-ups.

Provide professional engineering consulting services for the residential, commercial, and industrial sectors. Design, engineer, and construct HVAC systems, plumbing systems, and utility conservation products; boiler and chiller design. Evaluate building mechanical and structural infrastructure. Provide forensic engineering services for attorneys and the insurance industry. Advocate for utility conservation and more equitable electric, natural gas, water, and sewer tariffs. PROFESSIONAL LICENSURE: ~ Registered Professional Engineer: AZ, CA, CO, CT, FL, HI, IL, MA, MD, ME, MI, MN, NC, NH, NJ, NY, NV, OH, PA, RI, VA, VT, & WI ~ Certified Energy Manager (CEM) as endorsed by the Association of Energy Engineers ~ Certified Energy Auditor (CEA) as endorsed by the Association of Energy Engineers ~ LEED Accredited Professional as endorsed by the U. S....

Construction, Premises Liability - Defects, personal injury, insurance, codes, commercial, residential, accidents, falls, asbestos, ADA, sewer, water, liability, damages, general contractor, fire, flood, contracts, subcontractors, engineer

...General Contractor - President of Buckhead Classic (2006 – presen): Projects include defective construction repair, new construction, fire and floods, structural defects, water damage, offices, demolition, sewer, water, drainage, and historic structures. Owner/Developer and General Contractor – President, MilbCorp. (1984 – 2014): Projects include condominiums, roads and drainage, zoning, subdivisions, sewer, outfalls, water, drainage, for-sale homes, energy compliance, and professional offices, with cradle-to-grave responsibility for all projects. Education: University of North Carolina at Chapel Hill - Economics and English, Summa Cum Laude Johnston Scholar, Phi Beta Kappa - 1983. Thesis on Disintermediation and Economic Cycles received Highest Honors The Westminster Schools – 1979. Cum Laude, recipient of Special Award for Service, awarded only in select years....

Architecture, Construction Defects - Forensic Architect, Building Inspection, Architectural Professional Liability, Water Intrusion & Damage, ADA Consulting, Slip Trip and Fall, Building Code, Building Envelope, Waterproofing, Roofs, Fenestration, Construction Administration, Construction Standards, Standard of Care, Design Errors

...Provide quality assurance, evaluation and observation of in-progress construction of commercial and residential structures for conformance to design, material and workmanship standards. Provide expert services for Architecturally related personal Injury matters. NCARB National Council of Architectural Registration Boards Certified Certified as a Building Official by the Council of American Building Officials. Certified as a Building Official, Master Plans Examiner, Building Inspector, Plumbing Inspector and Residential Building Official by the State of Ohio. Numerous Ohio Board of Building Standards Approved Courses and Presenter. Appearances and testimony before the Ohio Board of Building Appeals. Professional Experience Principle Architect in a firm established in 1983, providing design services on a wide range of projects, including civic, recreational, commercial, educational, medical, and code consultation work....

Structural Engineering, Civil Engineering - Personal injuries, slip & fall, Construction Defects, Code review, structural assessments for conservatorship cases, Property condition assessments, Floor collapse, Building envelope assessments & consulting, panels failures, Structural distress, Fire damage structural assessment, Foundation defects

An accomplished and award winning structural engineer and experienced expert witness, I hold a Bachelor of Science degree in Structural Engineering and a Master of Science in Structural Engineering from FAU. As a licensed Professional Engineer (PE) with active licensure in Pennsylvania and several other states, my professional credentials are further reinforced by a current NCEES record. Drawing from a wealth of experience, my expertise lies in the evaluation, repair, and rehabilitation of existing structures. This encompasses a spectrum of tasks, including load-bearing wall removals, addressing floor sags, and managing foundation movements and failures. Additionally, I possess the capability to accurately pinpoint the cause and origin of structural deficiencies and damages resulting from accidents....

Business Damages, Economics - fraud, business valuation, business interruption, lost profits, product recall, personal injury, employment cases, discrimination, contract disputes, dispute resolution, economic damages, construction defects, insurance claims, class action, shareholder disputes, bankruptcy, commercial litigation.

...Product Liability: Economic damages to an international manufacturer of diesel locomotives due to defects in supplied engine components. Economic damages arising from the recall of pet food due to contaminated wheat gluten imported from China. Construction: Economic damages to a resort from defects in structural material resulting in additional costs to construct and lost profits due to delay in opening. Fraud and Arson: Amounts embezzled by a bank manager and methods used. Discrimination and Personal Injury: Class Action damages from wrongful discharge due to discrimination.

Architecture, Construction Defects - Architect, ADA compliance, Zoning, Building codes, Building product liability, Slip Trip Fall, Construction defects, Building envelope, Building materials, Construction accidents, Building demolition, Fire damage, Water damage, Structure collapse, Building personal injury

...His responsibilities and duties have included project acquisition and marketing; Project Development from concept ideas thru to construction; Client interaction, communication, and proposal writing; Zoning and Construction drawings for building permits; Managing structural and MEP engineers for the project; and problem-solving during construction. Mr. Bruttaniti was honored with an award for Excellence in Planning & Design from the Montgomery County Planning Commission, PA for an adaptive building re-use and sustainable design for a new Public Library in North Wales, PA. Litigation Support - Mr. Bruttaniti has Architect licenses in Pennsylvania, New Jersey, and Delaware, and has vast experience and knowledge of the architectural profession, with the expertise and qualifications to speak with integrity and proficiency in all aspects of building design and construction....

Structural Engineering, Construction Defects - Building Inspections, UAS (Drone) Inspections, Post-tensioning, Doors and Windows, Building Enclosures & Cladding, Waterproofing, Roofing, Insurance Claims, Wind & Water Damage, Stucco

...Duckstein has over 22 years of experience designing, constructing, and inspecting civil and structural projects. He is a results-oriented consultant with extensive experience in construction defect litigation support and expertise in commercial UAS “drone” operations in central/south Florida. He has a proven track record of providing high-level technical analysis and support for complex projects. His experience includes design and field support for south FL water-control structures and leading movable and fixed bridge inspections on the Ohio, Mississippi, Hudson, and St. Clair rivers.

Geology, Environmental - Groundwater, Hydrogeology, Geology, Geo-Hazards, Mining, Stormwater, Oil & Gas, Bedrock Aquifer, Groundwater Contamination, Environmental Forensics, Environmental Evaluation, Environment, Water Resources, Water Supply, Karst, Karst Geology, Karst Hydrogeology, Sinkholes

...His recognition as a geologic expert was acknowledged when he was selected by his peers to be the representative of the community of licensed professional geologists on the Pennsylvania Registration Board for Professional Engineers, Land Surveyors and Geologists in which he served two terms as board President. He represented Pennsylvania in the National Association of State Boards of Geology, where he was elected to the executive committee and still serves as a subject matter expert in hydrogeology, structural geology and engineering geology. Mr. Gillespie's unique insights into environmental management have been recognized by multiple organizations which retain him to provide continuing professional education to environmental professionals on strategic environmental managers and consultants. Mr....

Architecture, Construction Defects - Forensic Architect, Building Inspection, Architectural Professional Liability, Water Intrusion & Damage, ADA Consulting, Slip Trip and Fall, Building Code, Building Envelope, Waterproofing, Roofs, Fenestration, Construction Administration, Construction Standards, Standard of Care, Design Errors

...Provide quality assurance, evaluation and observation of in-progress construction of commercial and residential structures for conformance to design, material and workmanship standards. Provide expert services for Architecturally related personal Injury matters. NCARB National Council of Architectural Registration Boards Certified Certified as a Building Official by the Council of American Building Officials. Certified as a Building Official, Master Plans Examiner, Building Inspector, Plumbing Inspector and Residential Building Official by the State of Ohio. Numerous Ohio Board of Building Standards Approved Courses and Presenter. Appearances and testimony before the Ohio Board of Building Appeals. Professional Experience Principle Architect in a firm established in 1983, providing design services on a wide range of projects, including civic, recreational, commercial, educational, medical, and code consultation work....

Mechanical Engineering, Products Liability - Plumbing, Construction Defects, Premises Liability, Industrial Accidents, Heavy Equipment, Hunting Equipment, Manufacturing, Aviation, Origin and Cause, Pressure Vessels, Intellectual Property, Fire and Explosion Investigation

...Kiddy is a principle at Aither Forensics Engineering, LLC, a forensics consulting firm located in central Maryland. Dr. Kiddy spent over 20 years in various industries prior to becoming a full-time expert witness providing a broad industry experience base from which to draw extensive knowledge on a wide variety of topics. Dr. Kiddy's work experience includes the oil and gas industry, aircraft and helicopter design, marine structures, wind turbines, and telecommunications. From a technical perspective, Dr. Kiddy has expertise in mechanical design, engineering materials, plumbing/HVAC systems, corrosion, fire origin and cause, codes and standards, and warnings/instructions. From a product design standpoint, Dr. Kiddy's experience includes all aspects of a product life cycle such as early stage R&D, product development and qualification, manufacturing, quality control, and failure analysis. Dr....

Engineering, Construction Defects - Standard of care, construction defect, construction delay, engineering, mechanical engineering, HVAC, project management, construction schedule analysis, manufacturing, product liability, power, refrigeration, fire, explosion, automotive, forensics, failure analysis, engineering standard of care

Registrations • Professional Engineer: PA (PE075410) • American Bar Association (ABA) – Construction Forum • Environmental Protection Agency (EPA) Clean Air Act Certification – Universal (includes Chillers, HVAC & Refrigeration) • United States Patent & Trademark Office Registered (USPTO) Professional Affiliations • American Society of Mechanical Engineers (ASME) • American Society of Heating, Refrigeration, Air Conditioning Engineering (ASHRAE) • American Arbitration Association (AAA) • Certified Energy Manager (CEM) • Product Developers and the Manufacturers Association PDMA Supermarket Heating Ventilation, Air Conditioning & Refrigeration (HVACR) Matter – Florida - Provided expert witness field inspection and investigation of relevant HVACR and mechanical systems causing wet conditions via condensation. Guided counsel in deposition questions and developed the case strengths and weaknesses yielding a negotiated settlement favorable to our client....

Civil Engineering, Construction - Americans with Disabilities Act (ADA), Building Codes, Civil Engineering, Construction, Stucco, OSHA Ramp & Stairs, Scheduling Delay & Analysis, Structural Engineering, Waterproofing, Storm water

A construction and engineering expert with over 20 years of construction industry experience as a civil engineer, forensic engineer, CPM scheduler, cost estimator, general contractor, subcontractor, and project management consultant. Strong expertise gained through projects that ranged from $100,000 to over $1 Billion and have included commercial, residential, government, and institutional markets. Mr. Poole has been retained as an expert witness on litigation cases and testified at deposition, arbitration, and trial. He is a licensed Professional Engineer in Pennsylvania, New York, Maryland, and Florida.

Civil Engineering, Transportation - Railroad Track, Railroad Equipment, Streetcar Track, Railroad Grade Crossings, Railroad Structures, Railroad Bridges, Surface Transportation Board, Coal Rate Cases, Shortline Railroad, Tourist Railroad, Overhead Contact System, Track Related Injuries

With 50+ years of engineering experience and 20+ years of railroad experience, I have experience with railroad track design and inspection as well as most aspects of railroading regarding rail operations, streetcars, rail related injuries, railroad grade crossings and railroad structures. I have inspected numerous railroad bridges in many states as well as investigating derailments. In addition, my firm, Stone Consulting, Inc. has completed railroad line appraisals, rail equipment inspections and appraisals, and track assessments, for both shortline and tourist railroads. I am licensed as a Professional Engineer in AR; CO; FL; GA; IL; MD; ME; MI; MN; MO; MT; NC; NH; NY; OK; PA; TN; TX; UT; VA; WI; IA; MA; NE; NV; OR; RI; SC; VT; WA; WY. I have been accepted as an expert witness by the Surface Transportation Board (STB) for railroad track design, construction and maintenance of way.

Construction Defects, Architecture - stucco, building envelope, architecture, ADA, moisture intrusion, WUFI analysis, space frames, stairways, windows, building codes, roofing, delay claims, vapor barriers, air barriers, slip trip & fall, OSHA

...His career has included: full time work for a structural systems (space-frames) manufacturer, doing project engineering and later management; management of a hundred person architecture, engineering, landscape architecture, interior design firm; capital budgeting and owner led improvements of city government buildings; and the independent practice of architecture. Direct hands on experience includes construction inspections across North America, CADD contract documents, 3D computer modeling and animations. Management experience includes capital budgeting, project management and firm management. He is a voting member of ASTM Committee E:06 Performance of Buildings. He can bring building sciences to the table, as he has attended many WUFI advanced seminars and RCI conventions.. He started expert witness work in 2004 and has been a player in cases from ADA to trip and fall to architectural malpractice.

Architecture, Construction Defects - Architectual Errors & Omissions, Construction Defects, Building Inspection, Building Condition & Damage, Property Damage Cause, Dispute Resolution, Arbitration & Mediation, Disaster Recovery & Restoration, Environmental, Expert Witness, Slip, Trip, & Fall Injury, Forensics

...As an Emeritus Architect, with over fifty years’ experience, he provides building condition assessment & damage analysis as to cause & origin, and planning, design, and construction management of a wide variety of building types that include commercial office and retail, institutional, government, healthcare, airport terminals, warehouses, parking structures, single and multi-family residential, including high-rise buildings, and prototype resort housing. Professional experience includes working for Architect/Engineer firms, Texas state government agencies, and public and private clients, providing building design, production of construction document drawings & specifications, and construction contract administration, as well as serving as a referee on a variety of construction dispute mediation cases....

Construction, Construction Defects - Construction Claims, Roof Consultant, Construction Delay, Construction Management, Workmanship Claims, Change Order Disputes, Costs to Complete, Contract Disputes, Safety Issues, Design Build Claims, Construction Failures, Structural Failures, Construction Fault, Construction Expert

...Waine provides a broad range of services to insurance companies and law firms as well as construction, engineering and architectural firms that includes structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting and management, and expert testimony for construction claims and disputes. Responsible for field investigations, establish and coordinate expert teams for investigations, provides quality assurance, evaluation and supervision of in-progress construction for residential and commercial structures. Waine is a recognized expert in assessing, evaluating, remediating and testimony and is proven to be influential....

Biomechanics, Biomedical Engineering - Injury, Accident Reconstruction, Physiology, Traumatic Brain Injury, Concussion, Neck, Spine

...I hold faculty appointments in the College of Health Sciences at the University of Memphis and in the Department of Orthopaedic Surgery and Biomedical Engineering within the College of Medicine at the University of Tennessee Health Science Center (Memphis, TN). Further, I am a member of the research staff in the Musculoskeletal Analysis Laboratory, Human Performance Center and Breast Biomechanics Research Center in the College of Health Sciences at the University of Memphis and the BioRobotics Laboratory in the Department of Orthopaedic Surgery and Biomedical Engineering within the College of Medicine at the University of Tennessee Science Center. A central focus of my research pertains to musculoskeletal injury and rehabilitation, including spine injury and treatment. In this research, I have consulted for world leading companies involving structural and biomechanical causes of pain and injury including Dr. Scholl’s (Bayer/Merck/Schering-Plough), adidas USA and Nike Inc....

Geotechnical Engineering, Construction Defects - Civil Engineering, Expansive Soil, Foundation Analysis and Design, Settlement, Heave, Pavement, Retaining Walls, Slope Stability, Numerical Modeling, Seepage, Drainage, Erosion, Hydrology, Seismic, Earthquake Engineering, Laboratory Testing, Structural Engineering, Construction Defects

...He also performed structural inspections at numerous residences across the state of Texas to evaluate the distress patterns at these structures and to develop possible causes for the distress condition. Dr. Abdelhamid is responsible for directing and managing the geotechnical and geophysical forensic projects in BC’s Texas office, which includes selecting, developing, training and supervising staff of the forensic engineering department. He also coordinates and directs projects, monitors budgets, and makes detailed plans to accomplish goals and directs the integration of technical activities. He also directs and executes geotechnical project assignments including, engineering analysis and report preparation, field exploration and laboratory services.

Mechanical Engineering, Failure Analysis - Mechanical Engineering, Materials, Failure Analyis, Forensic Engineering, Manufacturing, Design, Warnings - Marketing Defect, Oil & Gas, Metallurgy, Stress, Root Cause, Safety Hierarchy Application, Laboratory Analysis, Inspection, Firearms, Electronics, Field Investigations, Fracture Surface

...Scott Anson has been practicing and teaching engineering for over 28 years. The first 8 years were in industry engineering roles involving process development and tooling design, as well as extensive laboratory failure analysis. During his over 20+yr. academic career he has held multiple industry appointments simultaneous with his academic role, in addition to his independent consulting work. He provides forensic engineering services involving product design, manufacturing defects, and warnings/instructions (marketing defects). He is a licensed professional engineer (P.E.) in Texas and has an active NCEES record to facilitate licensing in other states. Dr....

Hydrology, Civil Engineering - Water Resources, Hydraulics, Floodplain, Flood Forensics, Hydrologist, Hydraulic Modeling, Transportation Drainage, Roadway Drainage, Rainfall, Runoff, Design Storms, Sedimentation, Sediment Transport, Stormwater, Culvert, Stormsewer, Urban Hydrology, Urban Flooding, Construction

...I am an expert in hydrology, hydraulics, the engineering of drainage systems, including culverts, transportation drainage, bridge scour, bridge hydraulics, floodplain management, transportation hydraulics, water resources, and accidental death or drowning near hydraulic structures. My work routinely produces technical evidence that is hard to dispute and easy to understand. My background and experience in consulting and teaching allows me to produce complicated information in a format that is easy to digest, such as video files, and images that explain the complicated physical interactions of hydrology and hydraulics. Some of my past litigation work produced evidence that was not disputed by opposing experts. My approach is to first understand the case, then to discuss one on one what technical aspects are needed, what may be missing or is not yet discovered....

Geotechnical Engineering, Hydrology - forensic, geotechnical, geo-structural, and geophysical modeling and testing, expert witness testimony, arbitrations, court cases, soil-structure interaction, geophysics, and hydrological modeling.

...John Bryant is the principal in charge of all engineering operations including forensic, geotechnical, geo-structural, and geophysical modeling and testing. Dr. Bryant coordinates the operations of the company with other affiliated technical experts when required. He has provided expert witness testimony in over 300 arbitrations and court cases over the past 25 years. Dr. Bryant’s expertise includes soil-structure interaction, geophysics, and hydrological modeling. Noteworthy projects include Millennium Tower, State Highway 130, and Allen Eagle Stadium.

Products Liability, Manufacturing - Testing, Failure Analysis, Ergonomics, Product Design, Manufacturing, Mechanical Engineering, Premises Liability, Structural Engineering, Warnings and Labels, Slip, Trip & Fall, Metallurgy, Machinery/Equipment

I have 37 years of engineering design experience in multiple industries. I have developed designs for aerospace, consumer products, industrial machinery and products for use in retail environments. Strong manufacturing background and familiarity with all types of manufacturing equipment and processes. These include CNC cutting equipment, roll forming, stamping and progressive dies, Mig, Tig, and high frequency welding, robotics and automated manufacturing processes, assembly, finishing and packaging systems. I have the ability and resources to do physical testing of products, materials, including destructive and non-destructive testing. Strong analytical skills to assess product design and performance empirically and theoretically relative to specific industry standards. I am well versed in safety warnings and labels, and the responsibilities these requirements place on manufacturers of products and equipment.

Civil Engineering, Engineering - Wave modeling, subsidence, scour, vessel wakes and propeller wash,, Environmental fluid mechanics , Fluid-sediment-structure interactions, Coastal processes, Field measurements, Hydraulic engineering, Coastal protection, Hydrology, Sedimentation, Coastal Erosion

Jens Figlus is a coastal engineering expert with 12 years of experience. He works with Bryant on expert witness cases and projects related to sediment erosion, coastal flooding, water waves, fluid-soil-structure interactions, and issues related to ship-induced hydrodynamics, such as vessel wakes and propeller wash. His background is in applied coastal research and engineering, hydraulic engineering, and environmental fluid mechanics. Dr. Figlus is an Associate Professor in the Ocean Engineering Department at Texas A&M University. He heads the Coastal Engineering Laboratory (CEL) on A&M’s Galveston Campus and is a distinguished partner with the A&M Institute for a Disaster Resilient Texas (IDRT)....

Engineering, Construction - Construction defects litigation, property analysis, rehabilitation, design review, subrogation, allocation, premise liablity, catastrophic claim analysis

...Fronapfel, MSCE, PE, D-IBFES, DFE, CBIE, CFCC, CBCP, EDI, PTI1, F.NAFE, F.ASCE has a Bachelor of Science in Civil Engineering and a Master of Science in Civil Engineering with an emphasis in structural and forensic engineering. Ed's a Certified Level 2 Infrared Thermographer, Certified 3rd Party EIFS Inspector, Certified Forensic Claims Consultant, Board Certified Building Inspection Engineer, and Certified Building Commissioning Professional. He is a registered engineer in the States of AL, AR, AZ, CO, FL, GA, ID, IL, IN, IA, KS, LA,MA, MD, MI, MN, MS, MT, MO, NE, NJ, NV, NM, NC, ND, OH, OK, OR,PA, SC, SD, TN, TX, UT, VA, WA, WI, WV, WY . Edward has been deposed nearly 800 times, and admitted into trial settings over 110 times. He has been used as an expert in arbitration and mediations over 500 times since the late 1990's....

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Engineering, Construction Defects - Civil Engineering, mechanical engineering, engineering, construction, construction fault, forensic engineering, structural failure, structural inspection. Licensed in AR, TX, OK, MO, KS, MS.

...Justin Hall, PE is a licensed professional engineer providing a broad range of services in forensic engineering to insurance companies and law firms, construction, energy, mining, and technology, engineering and architectural firms, governmental and educational institutions, property owners, builders and individuals. With over 20 years of experience in engineering and forensic consulting, design, construction assessments, international codes and research, Justin Hall, PE has provided clients with structural analysis and design, condition assessment, damage investigations, failure analysis, construction consulting & management, and expert testimony. States include Arkansas, Missouri, Oklahoma, Texas, Tennessee, Louisiana and Mississippi....

OSHA, Slip Trip & Fall - Fall Prevention , Material Handling , Electrical Safety, Signs Signals Barricades, Ladders, Stairways , Working at Heights, Hand Tools, Steel Erection, Excavation, General Safety, Welding, Scaffolding, Confined Space, PPE, HazMat, Aerial Man Lifts, Respirators, Fire Prevention, Cranes and Rigging

...Achieved a Certified Safety and Health Official from Texas A&M University College of Engineering TEEX in 2013. Employed by TEEX from 2013-2015 as an Adjunct Professor teaching OSHA related course. Subject Mater Expert Student Fall Prevention/Protection Textbook TEEX. Train the Trainer OSHA CFR 1926 Train the Trainer industrial and Extendable-boom Forklifts, Aerial Manlifts, Structural and Aerial Suspension Scaffolding. Served in the USAF 3 years 3 months and 15 days as a C130 Aircraft Electrical Tech. Received an Honorable Discharge. Expert Witness Construction Fall Protection Cause 37360 223 District Court Gray County Settled prior to trial. Oilfield Crane-Rigging-Signaling Cause B192-633 District Court Jefferson County Settled prior to trial. Construction Motorized Manlift Cause 67795-A Smith County Settled prior to trial. Constuction Concrete Pumping Cause DC-17-10426 284th Judicial District Court Settled prior to trial....

Engineering, Security - Information Technology, Low Voltage Systems, HVAC, HVAC Controls, Building Automation Systems, Fire Alarm Systems, Risk Assessments, Audio-Visual Systems, Commissioning, SCADA, Video Surveillance Systems, Access Control Systems, CATV, Integrated Systems, Smart Building Technologies, Cabling Systems

John is a registered professional engineer in AZ, CA, CO, DC, FL, GA, IL, KY, LA, MA, MD, MI, MN, MO, NC, NV, NY, OH, PA, TX, VA, WA and WI. He is a Certified Protection Professional (CPP) by ASIS International, a Building Commissioning Professional (BCxP) by the American Society of Heating, Refrigerating and Air-Conditioning Engineers, a Leadership in Energy and Environmental Design (LEED) Accredited Professional by the US Green Building Council, and a Certified Homeland Security (CHS) III by the American Board for Certification in Homeland Security. John has been involved in the design of highly integrated and smart technology systems for buildings for several decades. He has overseen the implementation of hundreds of high profile and iconic facilities across the world....

Construction, Structural Engineering - Building Information Modeling (BIM), Level Of Development (LOD), Structural Engineering, 3D Modeling, Laser Scanning, LiDAR, scan-to-BIM, Metrology, Failure Analysis, Forensic Engineering, Architecture, MEP, mechanical, construction defects, concrete, steel, wood, timber, masonry, civil engineering.

...The firm focuses in the areas of engineering, laser scanning, Virtual Design and Construction (VDC) and Building Information Modeling (BIM). Mr. Ikerd is currently on the board of directors of the BIMForum and chairs three of their Taskforces; BIM Execution Plan (BxP), Reality Capture / Laser scanning and Level Of Development (LOD). He graduated with his bachelor’s in civil engineering and masters in structural engineering in 1998 from Washington University in St. Louis with a focus on 3D parametric modeling and is currently a University of Denver PhD candidate in BIM research.

Business Operations, Aviation & Aerospace - International Business Development, International Trade, International Arms Trade, Manufacturing, Environmental and safety compliance, Plant Management, Business Practices, Corporate Investigations, Business Practices, Business Administration

...These businesses included: - Turbine engine components: Blisks/Integrated Bladed Rotors, blades, vanes, engine structural components, and compressor section assembly. - Aircraft structures: the design, manufacture, assembly, and final aircraft assembly. Functions included metal fabrication, composites, aircraft wiring, assembly, tooling, and systems integration of components such as horizontal stabilizers, nacelles, flight controls, wings, and assembly of the aircraft. - Electronics manufacturing: PCB manufacturing, “black” box assembly, test, and sub-system integration. - Aircraft modification, integration and testing: design, development, test and delivery of highly complex systems including airborne and ground-based avionics, weapons and surveillance systems. - Operational maintenance of aircraft. He has been engaged as an expert witness for business practices and executive management....

Software Engineering, Intellectual Property - Software Industry, Source Code, Software Patents, Software Trade Marks, Software Antitrust, Software Trade Secrets, Source Code Review, Source Code Comparison, Source Code Misappropriation, Open Source Licensing, Source Code, Computer Forensics

.... • Computer/software forensics – able to reverse engineer and reconstruct hardware and software environments from backups, remnants, and fragments of deprecated software....

Structural Engineering, Civil Engineering - Engineering Design, Consulting Engineering, Structural Analysis, Infrastructure, Concrete, Steel Structures, Engineering, Construction, Grading, Drainage, Steel, Concrete, Foundation, Brick, Building, Structure, Frame, Masonry, Flooding, Flood, Damage, Pool, Leaking, Roof, EIFS, Stucco

...Patrick is a Technical Consultant at Apollo BBC and a licensed professional engineer with over 15 years of experience. Ms. Patrick has a background in structural and civil engineering, including civil site development, structural design, structural forensics, highway and associated structure analysis and evaluation, retaining wall evaluation, flood mitigation and floodproofing, building envelope consulting, and finite element analysis of structural systems. Amy is a licensed professional engineer in Texas and California and has been an adjunct professor at the University of Houston-Downtown's Structural Analysis and Design program since 2013. She is an experienced expert witness in construction defect litigation.

Structural Engineering, Civil Engineering - Forensic engineering, construction defects, structural failure and retrofits, bridge engineering, fall protection, building codes, project management, fire, water, wind, snow, hurricane, impact, damage analysis, hydrologic and hydraulic flood studies, electrical power line structures

...Marcor Platt is a licensed civil and/or structural engineer (PE/SE) in 21 US states or territories - namely Alabama, Arizona, Arkansas, California, Colorado, Florida, Hawaii, Illinois, Kentucky, Louisiana, Nebraska, Nevada, New Mexico, North Carolina, Oregon, South Carolina, Tennessee, Texas, Utah, the US Virgin Islands, and Washington. He is a Project Management Professional (PMP) and Agile Certified Practitioner (PMI-ACP). He provides expert opinion reports and testimony for structural and civil projects involving both forensic engineering, design engineering, and project management. He has conducted over 600 forensic investigations involving roof failures, wall failures, foundation issues, corrosion, or other forms of damage resulting from rain, hail, wind, snow, tornado, hurricane, earthquake, lightning, fire, volcano, tropical storm, vehicle impact, construction defect, or other natural or man-made events....

Mechanical Engineering, Structural Engineering - Ziplines & Trampoline Courts: Physics, engineering, industry standards, safety & rescue procedures, state and local regulations, and testing. Over 70 expert engagements and zipline building projects in over 30 U.S. states; Several more in Puerto Rico, Mexico, and Canada; 100% in the last four years.

...Richardson is the President of Momentum Engineering, LLC; he's designed and built aerial adventure rides, and devices since 1988. He is working on a Master's degree at Utah TECH University. Bachelor of Science in Engineering and 30+ semester hours of Physics. Building ziplines for 20+ years, where he has designed, evaluated, and patented multiple safety elements and devices. In 2000, Park City Mountain Resort Zipline designed, testing, prototypes, and Patents for passive braking trolleys, a series of springs as the emergency arrest device, and built the towers for a 4000+ foot long zipline. In 2009 he built and designed his commercial zipline in Spanish Fork, Utah. He has three U.S. Patents for zip line safety trolleys and springs with at least one pending. He is on two advisory and voting committees with the American Society for Testing and Materials (ASTM)....

Construction Defects, Construction - Forensic investigation, building pathology, failure analysis, technical reporting, construction claims, litigation support, insurance, building code, EIFs, stucco, building envelope, facades, rainscreen, infrared, moisture, structural capability, energy conservation, contract analysis.

...Matthew Furlong specializes in construction defect and failure analysis, forensic engineering, scientific investigations, technical report writing and expert witness testimony for construction claims and litigation matters. Mr. Furlong has 21 years of experience with construction, project coordination and design, remodeling, and field inspections of building systems for residential, and commercial low and high-rise properties. He has successfully completed more than 600 unique and custom projects while as a general contractor. His builder background experience ranges from high-end new custom home construction, interior renovations and additions, to green building and energy efficient homes, historical renovations, timber-framing, and creating elaborate custom interiors in prestigious estate-sized homes. This experience gives Mr. Furlong the unique qualifications to testify as an expert in construction matters. As a professional consultant, Mr....

Construction, Construction Defects - Engineering Design, Building Codes, construction management, structural engineering, infrastructure engineering, reinforced concrete, steel structures, bridges, Structure engineer, foundations, piers, abutments, and soil analysis.

...LICENSES: He is a licensed professional engineer in the states of Virginia and Texas. He is also licensed contractor in the state of Virginia and District of Colombia (Washington DC). He is certified by the Supreme Court of Virginia as a Mediator. He is admitted in Virginia, West Virginia and Washington DC Court Systems. CONSTRUCTION EXPERT: Experienced in construction disputes between owners and general contractors, contractors and subcontractors, Contractors and suppliers, Excellent in analysis of project cost, project quality and project time completion. Familiar with building codes, construction industry labor, material and equipment costs.

Mechanical Engineering, Accident Reconstruction - Accident investigation and reconstruction, forensic engineering, personal injury, highway safety, structural analysis, Computer Simulation, Finite Element Analysis (FEA), airbag & seatbelt, guardrails, patent infringement; slip, trip & falls; crashworthiness, fuel tank, and pipelines analysis

Experts in our consulting firm (ART, LLC) have more than 28 years of superior expertise in the areas of Mechanical Engineering, accident investigation and reconstruction, personal injury, highway safety, forensic engineering, automotive/vehicular engineering, Computer Simulation, Finite Element Analysis (FEA), and structural analysis. We also conducted lots of research on guardrails, airbag & seatbelt fatalities/injuries; slip, trip & falls; patent infringement, crashworthiness, failure analysis, fuel tank, and pipelines. ART experts are widely recognized as world leaders in advanced computer simulations of complicated structural, crashes, and impact-related problems. We conducted a wide variety of successful projects and accident reconstruction analyses for many government agencies, private industry, and engineering and law firms....

Structural Engineering, Civil Engineering - Construction Defect, Concrete, Seismic, Retaining Walls, OSHA, Building Codes, Steel, Earthquake, Stormwater Management, Civil Engineering, Failure Analysis, Wood, Wind, Construction, Structural Engineering, Strength of Materials, Masonry, Foundations, Construction Accident, Design and Analysis

Civil/Structural Engineering Construction Defects Building Codes OSHA Failure Analysis Strength of Materials Concrete/Steel/Wood/Masonry Design Concrete/Steel/Wood/Masonry Analysis Seismic Design and Analysis Wind Design and Analysis Foundations and Retaining Structures Grading and Soil Properties Field Repair Designs Stormwater Management Component/Connection Design and Analysis Construction Cost Estimates Building Envelope (Moisture Barriers) Construction Management Registered Professional Engineer, State of New York, License No.087752 Registered Professional Engineer, State of Maryland, License No.42640 Registered Professional Engineer, Commonwealth of Virginia, License No.051210 Registered Professional Engineer, State of New Jersey, License No.24GE05239300

Structural Engineering, Civil Engineering - Highway Bridge Design, Transit Guideway Design, Structural Bridge Design, Concrete Segmental Bridge Design, Design-Build, Value Engineering

I serve as President and Chief Technical Specialist for Caprock Engineering, PLLC, and as a Principal Engineer with Systra-IBT. I have over thirty years of experience in structural bridge design. My LinkedIn profile is at https://www.linkedin.com/in/scottphelan-caprock. I serve on the international American Society of Civil Engineers (ASCE) Transportation & Development Institute (T&DI) Economics & Finance Committee, the national Precast/Prestressed Concrete Institute (PCI) Bridges Committee, and the regional American Council of Engineering Companies/ Washington Department of Transportation (ACEC/WSDOT) Structures & Geotech Subcommittee. I recently was inducted as an ASCE Fellow. I have participated in the design and construction of numerous concrete segmental bridge projects, including the final design of two world-record bridges and the construction of the first precast concrete segmental bridges in the State of Washington....

Mechanical Engineering, Real Estate - plumbing, pipe, re-pipe, leaks, failures, Inspection, construction, water damage, feasibility, epoxy liner, CPVC, Aquatherm, PEX, Galvanized, copper, risk assessment, machinery, insurance, defect, standard of care, Blockchain, smart contract adjudication.

Thirty-five years of practical engineering experience across the aerospace, building construction, and technology industries. Bachelors of Science in Mechanical Engineering and Masters degree in International Business Administration. Expert Witness at the intersection of mechanical engineering, business practices, and standard of care.  Technical specialties include plumbing systems (failures, leaks, defects and corrosion), building envelope failures resulting in mold or water damage, Real Estate transactions, mechanical failures due to improper maintenance or operation, Investigation, testing, and report writing. Excellent public speaking skills with the ability to explain complex matters in simple and accessible terms. Knowledgable in recent technologies such as blockchain, digital twin, and digital twin applications for the engineering professions. Experienced in cross border and international engineering practices....

Premises Liability, Dispute Resolution - Building construction, litigation, apartment, fire, damage, stair, starway, slip, fall, injury, public, private, accessibility, ADA, trip, ramp, sidewalk, forensic, government, inspection, investigation, dispute resolution, asbestos, lead, swimming pool, condominium, site development, case support.

Company Principle Steven Wilcox has a Bachelor of Science in Building Construction from the University of Washington (1984) with minor studies in architecture, civil engineering and drafting. He trains regularly with professional and trade organizations. Council of American Building Officials Certified Building Official and International Council of Building Official Certified Building Inspector (since 1994). General Studies, drafting and emergency management certifications. Steve is a Court Appointed Special Advocate (CASA) for children in King County, WA. Over 25 years as a premises and construction defect consultant, 30 years as a municipal building official, and 38 years of building inspections and related management experience....