63 Tools Expert Witnesses Found

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...His research includes both basic and applied forensic studies to develop fundamental understandings of fire dynamics, pattern formation and damage assessment as well as to develop practical forensic tools for fire scene investigations and analyses. Dr. Gottuk has been active in and a member of the NFPA 921 Fire Investigations Technical Committee for over 20 years. He is a contributing author and editor of the SFPE Handbook of Fire Protection Engineering and an author of chapters in NFPA Fire Protection Handbook, and the National Fire Alarm and Signaling Code Handbook. Topics of Dr. Gottuk’s research include compartment fires; liquid fuel fires; flammable gas fires; electrical fire analysis (beading and other signatures); tools and methods for calcination measurements and analysis; the development and analysis of clean burn; ignitable liquid residue sampling; and effects of accelerants on fire development. Dr....

Statistics - Statistician, Data Analytics, Criminal Justice Data, Police Data, Neighborhood Association Data, Gun Death Data, Public Health Data, Opioid Overdose Data, Census Data, Medical Data, Biostatistics, Proportions, Discrimination

...This includes, but is not limited to, criminal justice data experience regarding police stops, traffic stops, large jail data, prosecution data, and risk assessment tool validation. Other experience entails expertise with Violent Death Reporting System data including gun death data, drug overdose death data, accidental death data, and violence prevention. Homelessness data experience. Experience in biostatistics research methodology for various medical topics including brain tumors, effectiveness of neurological medical devices, hospital trauma department research, and gynecological diagnoses such as endometriosis and pudendal nerve damage. Litigation support experience in cases regarding neighborhood associations, race and demographics in housing discrimination, large bank failures, police data and Brady list data, county prosecutor data and disclosure, and Department of Justice consent decree measurement requirements.

Biomechanics, Premises Liability - Slip, Trips, and Falls Analyses, Slip-Resistance Testing (tribometers), OSHA/ADA/ASTM Pertaining to Walkway Safety, Vehicular/Pedestrian Accident Reconstruction and Injury Biomechanics (bones, tissues, causation).

...Notably, he co-authored the groundbreaking research that shaped the ASTM F2508-16e standard for tribometers, a critical tool in understanding and measuring floor friction – a key factor in slip-and-fall cases. Legislative Impact: Dr. Lee-Confer’s expertise extends beyond academia into the legislative arena. He played a pivotal role in the biomechanical development and implementation for Arizona State Senate Bill (SB1373), addressing critical aspects of fall prevention. Educational Background: His educational journey, culminating in a PhD from the highly acclaimed University of Southern California, focused on biomechanics with a specialization in slip dynamics. His research delved into the nuances of body movement during slips, slip severity assessment, detection of slips, motor control during slips and floor slip resistance evaluation – all areas of significant interest in legal disputes involving falls....

Biomechanics, Accident Reconstruction - Accident Reconstruction, Biomechanical Analysis of Injury, Premises Liability, Slips/Trips and Falls, Crash Data Retrieval, Heavy Vehicle EDRs, Blackbox Download, Photogrammetry, Computer Simulations, Failure Analysis, Human Factors, Laboratory Testing, 3D Laser Scanning, Expert Witness Testimony

...- Accident Reconstruction - Premises Liability; Slips/Trips and Falls - Crash Data Retrieval; Heavy Vehicle EDRs - Photogrammetry and 3D Computer Simulations - Vehicle Systems Analysis Services: - Accident Reconstruction - Biomechanical Analysis of Injury - Premises Liability; Slips/Trips and Falls - Crash Data Retrieval - Heavy Truck Blackbox/EDR Downloads - Failure Analysis - Human Factors - Laboratory Testing - 3D Laser Scanning - Computer Simulations - Expert Witness Testimony - Litigation Support Incident Types: The following are examples of types of incidents that I investigate: -Transportation Accidents: Automotive, Motorcycles, Bicycles, Scooters, Golf Carts, Boats, Jet Skis, Buses, Heavy Trucks - Recreational Accidents: Exercise Equipment, Amusement Parks, Playground Incidents, Sports Injuries, Helmets/Personal Protective Equipment - Premises Liability: Slips/Trips and Falls, Falling Objects, Code Compliance - Industrial Accidents: Heavy Equipment, Rotating Machinery, Hand Tools...

Accident Reconstruction, Safety - Vehicle collisions, Premises liability including slip/trip & fall, Safety, Code Compliance, Construction & Industrial Accidents, Failure Analysis, Human Factors, Biomechanics, Mechanical Engineering, OSHA, ADA compliance, Products Liability, Criminal, Licensed Safety Engineer by State of California

...Applications to manual & power tools, heavy machinery: woodworking, metal working, cutting, shearing, power presses, die casting, injection molding, food machinery, PPE (e.g., safety goggles); consumer products (e.g., chairs, tables, water dispensers, pot handles, exercise equipment, lawnmowers); conveyors; fasteners and connections (e.g., bolts, welds, handles); mechanisms; etc. Criminal Cases
: Vehicular homicide, gross negligence, shooting reconstruction, DUI-related accidents; vandalism, other cases requiring expertise in engineering and the physical sciences.

Aviation & Aerospace, Human Factors - Aviation Crash, Airline & General Aviation, Flight Crew Error, Flight Training, Airplane Crash, Aviation Safety, InFlight Emergency, FAA, Maintenance Negligence, Crash Investigation, Aircraft Safety, Corporate Jet Accidents, Pilot Error, Controlled Flight Into Terrain, Loss of Control, Weather

...Louis, MO, 1989-1996 As an Aviation Expert, Captain Botta has 35 years of Aviation Experience: • General Aviation Background • A Major Airline Captain with • International, Multi-Cultural experience • Designated FAA Line Check Captain • Pilot Instructor • Captain for NetJets • Certified FAA Flight Instructor (Current 3/24) • Aircraft Simulator instructor, General Aviation, 2016-2018 As a former Licensed Professional Counselor with a private & group practice, Bert combines Aviation Expert skills with • Psychological and Emotional tools • That Provide Valuable Insights into the cause and effect of Aviation Accidents and Incidents TWA CAPTAIN: 1966-1992: 20000 hours flying experience, Captain, First Officer, Flight Engineer....

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

.... • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii. Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/Trenching, Crush, Traffic Control, Multi-Employer, Cranes, Confined Space, Demolition, Directional Drilling, Electric, Equipment, Machine Guarding, Excavation, Paving, Power Tools, Rigging, Shoring. Successfully implemented numerous nationally and internationally accepted safety management systems involving multiple training programs, inspection tools and accident investigation methods....

Intellectual Property, Electronics - Software, Electronic Design Automation, EDA, Semiconductor, GDS, GDSII, OASIS

...His sharp eyes plus his understanding of semiconductor processing and design tools mean that if it's there, he can find it.

Legal Nurse Consulting, Orthopedic Surgery - Operating Room Nurse, Circulator Nurse, Scrub Nurse, Orthopedic Surgery, Neurosurgery, General Surgery, ENT Surgery, Plastic Surgery, DaVinci Robotic Surgery, GYN Surgery, Urological Surgery, and Pediatric Surgery, SPD, Pre-Op, PACU/Recovery, Surgery Center, GI, Nursing Leadership, Patient Safety

...Chaudron worked in healthcare consulting roles for Premier Inc. and DGA Partners (now Veralon), where she utilized her business expertise to perform financial projections and ROI and competitor analyses, as well as design a modeling tool to assess patient flow. Ms. Chaudron is currently a member of the Association of PeriOperative Registered Nurses, the American Organization for Nursing Leadership, the American College of Healthcare Executives, and the American Association of Legal Nurse Consultants.

Accident Reconstruction, Police Practices & Procedures - Cars, SUV, light trucks, pedestrians, motorcycles, bicycles, scooters, Bosch CDR EDR Tool, black box, Tesla, Hyundai, Kia, qualified immunity, Code 3 driving, emergency vehicle operations, police pursuit driving, police practices & procedures, DUI FSTs, DUI arrests, TV and media consulting.

Provides forensic analysis and litigation support to attorneys, insurance companies and municipalities in the field of accident reconstruction. Has qualified as a court recognized expert in traffic accident reconstruction for jury trials in Orange, Los Angeles and Riverside Counties. Has performed work in many other jurisdiction including Rimini, Italy. Has been practicing accident reconstruction since 1999 and collision investigation since 1989. Has worked privately for criminal prosecution & defense as well as civil plaintiff & defense. Also teaches intro to criminal law, traffic enforcement, DUI investigations, field sobriety tests & arrests at a Southern California based police academy. Retired after 30 years of service from the Irvine (CA) Police Department in November of 2019 where he was assigned to the Field Operations Division as a Detective responsible for traffic-related cases. Worked as the “Team Leader” for the Irvine Police Department’s M.A.I.T. (Major Accident Investigation...

Psychiatry - Standard of Care, Traumatic Injury, PTSD, Sexual Offender Risk Assessment, Testamentary Capacity, Intentional Infliction of Emotional Distress, Mental Impairment, Disability, Adjustment Disorder, Depression, Psychosis, Personality Disorders, Anxiety, Inpatient Care, Institutional Care, Suicide Risk

...These methodologies are used to better understand our patients, identify patterns and trends and create tools for mentoring clinical staff. The process supports the Clinical Operations Division’s “ground up” change model where executive level decision making is based on input from unit staff at each facility. It also assists the department in identifying, designing and developing training programs based on the facilities’ needs. Prior to joining COAC, Dr. Heckman was a Senior Psychiatrist, Supervisor, for Coalinga State Hospital (DSH-Coalinga) and continues to provide direct patient care at DSH-Coalinga. He was also a staff psychiatrist prior to his senior role and part of the telepsychiatry program. He provided forensic services and expert testimony. Dr....

Automotive, Slip Trip & Fall - Auto accident, car crashes, auto and motorcycle crash reconstruction, vehicle ergonomics, vehicular dynamics, Performance driving, defensive driving, human factors, Slip, trip and fall, human physicality, wire rigging and safety, climbing rigging and safety.

...Accident Scenario Recreation: Henry has the tools and a network of professionals necessary to recreate a multitude of accident scenarios with precision. With his network and expertise he’s able to provide an accurate and detailed analysis of the causes and contributing factors of accidents. Henry Kingi Jr. will provide expert testimony in the following areas: Physical Performance Evaluation: Henry can evaluate the execution of stunts involving slip, trip, falls, and (un)orthodox safety or stunt rigging, assessing compliance with industry standards if applicable and identifying potential negligence or safety concerns. Vehicular Dynamics and Vehicle Ergonomics: With his profound knowledge of vehicle dynamics and drivers ergonomics, Henry can analyze the feasibility and safety of car action and performance scinarios. He can evaluate whether industry standards were followed and identify any factors that may have contributed to accidents....

Architecture, Construction - Healthcare Architecture, OSHPD, BIM, Integrated Project Delivery, Lean Construction, Construction Defects, Construction Claims, Quality Control/Quality Assurance, Hospitals, Schools, Slip and Fall, ADA, Contractor Non-Conformance, NAVFAC, Change Orders, Owner Payment Claims.

...Facility Management in the 21st Century,” International Facility Management Association (IFMA) Conference, San Francisco, California, 2010 “TWI—Training Within Industry,” Lean Construction Congress, San Francisco, California, 2009 “Creating Quality Systems for the Architectural Practice,” AIA, Boston, Massachusetts, 2008 “Making the Most of Your Millennials,” AIA National, Training Podcast, 2008 “Project Staff Training Using Training Within Industry (TWI) Tools,” AIA National, Podcast, 2007 “Beyond Redlines: Quality Management in the Architecture Firm,” AIA, San Antonio, Texas,

Failure Analysis, Risk Management - Power Grid, Energy Infrastructures, Marine Industry, Accident Investigation, Power Tools, Patent Litigation, Construction Safety, Utilities, Oil & Gas, Wildfire, Public Safety, Root Cause Analysis, Failure, Accident, Energy, Climate Change, Renewable Energy, Disaster, Catastrophic Injury, Safety.

Dr. Parhizkar is a distinguished expert witness renowned for her profound expertise in root cause analysis and quantitative risk assessment of complex systems. With over 16 years of professional experience, Dr. Parhizkar has emerged as a leading authority in the fields of safety assessments, fault tree analysis, failure mode and effect analysis, and common cause failure assessment. Her career trajectory reflects a profound commitment to unraveling the complexities of various industries, including energy, transportation, and environmental safety, through meticulous research and innovative methodologies. With a wealth of experience and a meticulous approach, she has established herself as a go-to expert witness in litigation and consulting contexts necessitating profound expertise in accident reconstruction, root cause assessment, and patent litigation analysis. Dr. Parhizkar's renown extends beyond these domains, encompassing mechanical and environmental engineering, as well as specialized...

Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle,Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe, HVAC, CPVC, Oil & Gas, Welding

.... • Fracture analysis of Metals, Plastics & Glass • Corrosion & Degradation of Materials • Mechanical Behavior of Materials • Fasteners • Fire Sprinkler Systems • Mechanical Failures • Weld, Braze, & Solder failures • Plumbing Pipes, fittings & Valves • Aircraft • Automobile components • Turbine Blades • Amusement Rides • Copper, CPVC, PEX Tubing/Pipes • Household Appliances & Consumer Products • Construction Equipment & Machinery • Construction Tools • Process Piping • Electrical Connectors, Wires & Devices • Medical Devices & Instruments • Fitness Equipment

Social Work, Child Abuse - Child Protective Services, Department of Children and Family Services, Investigations, Standard of Care, Removal, Exigency, Physical Abuse, Sexual Abuse, Neglect, Child Death, Child Fatality, Child Welfare

...Focus Areas Include; Child Welfare Expert Child Abuse Investigations Clinical Social Worker Expert Witness Child Fatality Investigations CPS /DCFS Expertise Therapist Coach Consultation Psychotherapy Crisis Counseling Mental Health Counseling Forensic Interviewer Case Management Community Outreach Group Therapy Record/Case Review Structured Decision-Making Tools Testimony

Video, Animations - Photogrammetry, Video Analysis, 3D Scene Reconstruction, Forensic 3D Analyst, Videogrammetry, Laser Scanning, Body worn camera, Video reenactments, Virtual Reality, Shooting reconstruction, Reverse Camera Projection, Onsite Photogrammetry, Use of Force, Surveillance, Body-Worn Cameras

...Terpstra also serves as a peer reviewer for SAE, ACSR, and the Association of Firearm and Tool Mark Examiners (AFTE). He is a certified Forensic Video Technician through the Law Enforcement and Emergency Services Video Association International (LEVA). He is currently the lead instructor for an ACTAR (Accreditation Commission for Traffic Accident Reconstruction) accredited, three-day course offered by SAE titled: “Photogrammetry and Digital Media Analysis”, and an instructor for the Basic Laser Scanning Certification course offered by the International Association of Forensic Security and Metrology (IAFSM). Mr. Terpstra currently serves as a member of the Forensic Metrology Task Group within the Crime Scene Investigation and Reconstruction Subcommittee in the Organization of Scientific Area Committees (OSAC), which is administered by the National Institute of Standards and Technology (NIST)....

Psychology, Behavioral and Social Sciences - coercive control, domestic violence, child abuse, workplace bullying, batterers, battered women syndrome, grooming, coercion, psychological manipulation, psychological maltreatment, abuse, alienation, undue influence, consent, cults, toxic workplace, hostile workplace, psychological maltreatment

...Amber's lived experience of coercive control in multiple contexts is critical to her understanding of the pattern of behaviors coercive controllers exhibit, and this experience has been integrated into the QSM™ to provide mental health, law enforcement and legal professionals with the tools needed to detect, intervene in and prevent coercive control. While current legislation on coercive control in the US is relatively new, Ms. Amber understands the foundational aspects of the pattern, which are closely related to terrorism, torture and kidnapping, and which date back in research more than 70 years. The QSM™ integrates the fields of neuroscience, trauma, partnership and domination systems, psychology, sociology, biology, human rights, and intimate terrorism to effectively and holistically address and dismantle discrimination and oppression within families, organization, groups and systems worldwide. Ms....

Video, Photography & Imaging - Forensic Video Analysis, Image Clarification, Security Video, Surveillance Video, Cell Phone Video, Photogrammetry, Reverse Projection, Video Production, Day in the Life Video, Drone Video & Drone Photography, Digital Media, 3D Representation & 3D Graphics

...He is LEVA certified and constantly learning new tools and techniques. Last year he adding 3D laser scanning for scene processing and height analysis to his tool set, as well as site capture and analysis as an FAA certified Drone Pilot. Additionally, Steve has over 35 years experience in Martial Arts and is a certified Master Instructor of Tang Soo Do. As an instructor, competitor and judge for most of that time, Steve has experience in Confrontational Analysis which helps elicit detail and information about the actions observed in video. Though not trained in Use of Force work, he offers experience and insights that goes well beyond the average viewer. This has proven helpful in assault cases captured on video which don't require Use of Force investigations. In the words of an Assistant CT State Attorney, "In addition to preparing court exhibits, [Steve Kline] has appeared as a witness....

Information Technology, Forensic Science - Data Science, Digital Forensics, Analysis, Examination, Investigation, Collection, Preservation, eDiscovery, Discovery, Aggregate, Presentation, Communication, Education, Legal Technology, Litigation Support, Diversity, Equity, Inclusion, DEI

EDUCATION & PROFESSIONAL CERTIFICATIONS Current: • GCFE – (Global Information Assurance Certification) Certified Forensic Examiner Legacy: • EnCE – EnCase Certified Forensic Examiner • AA in Graphic Design, University of the District of Columbia • A+ CompTia Certification • Network+ CompTia Certification PUBLICATIONS • The Art of Consultation: Creativity in Forensic Investigations (July 2021) • The Main Event: Windows Event Logs are Tools for Investigators – Issue #6 of the Finely Tuned Series – Corporate Counsel Business Journal (November 2020) • Upward Mobility: The Important of Mobile Device Management – Issue #5 of the Finely Tuned Series – Corporate Counsel Business Journal (November 2020) • Retention Attention – Issue #4 of the Finely Tuned Series – Corporate Counsel Business Journal (November 2020) • Deploy the Asset – Issue #3 of the Finely Tuned Series – iDS Blog (September 2020) • Puzzle Pieces – Issue #2 of the Finely Tuned Series – Corporate Counsel Business Journal (November...

Investigation, Security - Death, Murder, Suicide, Homicide, Drowning, Accidental Death, Crime Scene Reconstruction, Ballistics, Negligent Security, False Arrest, False Confession, Overdose, Medicolegal Investigations, Blood Spatter, Video Analysis, Scene Staging, Human Smuggling, Scene Management, Case Management, Testimony

...Exceedingly skilled in Interview & Interrogation, cold case review, crime scene management, crime scene reconstruction, processing, evidence collection, preservation, evaluating, interpreting and determining negligence on crime scenes, double-blind line-ups, witness identifications and statements, confessions, false confessions, police policies, and examining the human body for trace and biological evidence, wounds caused by gunshots, blunt objects, edged weapons, and patterned injuries caused by tool marks and evaluate blood spatter, tire wear, footwear, time of death and crime scene staging. Expended Countless hours for courtroom preparation, depositions, motions to suppress, and presented testimony in over one hundred misdemeanor, felony, and capital felony hearings, depositions, and trials....

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...His research includes both basic and applied forensic studies to develop fundamental understandings of fire dynamics, pattern formation and damage assessment as well as to develop practical forensic tools for fire scene investigations and analyses. Dr. Gottuk has been active in and a member of the NFPA 921 Fire Investigations Technical Committee for over 20 years. He is a contributing author and editor of the SFPE Handbook of Fire Protection Engineering and an author of chapters in NFPA Fire Protection Handbook, and the National Fire Alarm and Signaling Code Handbook. Topics of Dr. Gottuk’s research include compartment fires; liquid fuel fires; flammable gas fires; electrical fire analysis (beading and other signatures); tools and methods for calcination measurements and analysis; the development and analysis of clean burn; ignitable liquid residue sampling; and effects of accelerants on fire development. Dr....

Engineering - Mechanical Engineering, Electrical Engineering, Structural Engineering, and Forensic Engineering

...Our constant exposure to construction and development problems in our forensics practice allows us to sharpen our design skills on a daily basis, and our design experience completes our problem solving tools in our forensics tasks. The overall benefit comes in the form of a quality, efficient, and effective design. M2E has a track record of successfully completed real estate projects. The Firm also provides real estate owners, developers, contractors, condominium associations, and management companies throughout the country with plan review, construction observations, due diligence inspections and reporting services. The Firm provides design engineering services to the construction industry and arbitration, litigation, mitigation and trial support, expertise and testimony to attorneys and their clients. As such, the Firm has been used by foremost law firms such as Greenberg Traurig, Ackerman Senterfitt and others.

Intellectual Property, Economics - Damages Calculations, Lost Profits, Business Interruption, Intellectual Property Infringement, Products Liability, Earnings Loss, Lost Earnings, Patent Infringement, Trade Secrets, Trademark, Wrongful Death, Employment Disputes

Application of economic, accounting and statistical analysis tools to assess damages in products liability, contract breach, wrongful death, personal injury, business interruption, intellectual property, construction defects and employment disputes. Clients in manufacturing, airlines, real estate, oil and gas industry, hospitals, food services, and boat sale industries. Specialty is damages assessments in complex litigation.

Locksmith, Forensic Science - Automatic-doors, Accident, Investigator, licensed, evidence, Fire-doors, Injury, door-malfunctions, break-in, toolmarks, Forensic, expert, locks, bypass, identification, Architectural, witness, certified, inspector, code-compliance, examination, hardware-failure

...MEMBERSHIPS: IAIL- International Association of Investigative Locksmiths 2023 ALOA - Associated Locksmiths of America 2022-Present NFPA – National Fire Protection Association 2020-Present DHI – Door and Hardware Institute - 2018-Present ALA- Alabama Locksmith Association – 2016-Present TECHNICAL EDUCATION AND TRAINING: CFDAI – Certified Fire and Egress Door Assembly Inspector AAADM Certified Inspector 2022-2023 by American Association of Automatic Door Manufacturers Completed Investigative Locksmithing Courses Completed Course in Photography for Locksmith Completed Course– How to Prepare to be a Forensic Investigator Passed CFL national exam for Forensic Investigative Locksmith Fulfilled all requirements for CFL Certification Completed Aurora Access Control E-Plex Automatic Door Training Certificate of Completion – Hardware Training Program Completed Basic Photography Course Completed Safe and Safe Lock Servicing Course Completed Automotive 101 X-Horse Training Completed VVDI Key Tool...

Aviation & Aerospace - Commercial Aircraft Maintenance, Modification, Storage, and Repair (Major and Minor), Structural repairs, Lease acceptance & return language, FAA, FARS, Regulatory compliance, AC records, Documentation, STC's, Tool use and safety, MRO Performance and Procedures, Maintenance Tracking, Logbooks

...Proper Use of Tooling 6. Maintenance Tracking 7. Federal Aviation Regulations (FAA FARs) 8. Commercial Aircraft Maintenance 9. Commercial Aircraft Storage 10. MRO Performance and Procedures 11. Regulatory Compliance, Aircraft Records 12. Maintenance Documentation 13. Logbooks & Maintenance Sign-offs 14. STCs and Major repairs 15. Structural Repairs.

Safety, OSHA - Construction, Mining, Workplace Inspections, Crane, Rigging, EM 385-1-1, First Aid/CPR/AED, General Industry, Accident Investigation, Safety Training, Compliance, Workplace Conditions, Fall Protection, Powered Industrial Trucks, Machine Guarding, Excavation, Trenching, Scaffolds, Multi-Employer

.... • Construction training and safety standards for power tool injury. Safety and Slip Trip & Fall, EM 385-1-1, OSHA, (SSHO), Competent Person, First Aid/CPR/AED Instructor Trainer, Certified Safety Professionals (CSP) designation with the Board of Certified Safety Professionals, Certified Safety and Health Professional (CSHP) in the State of Hawaii. Construction and General Industry, Accident Investigation, Fall Protection, Forklift, Aerial Lift, Boom Lift, Scissor Lift, Machine Guarding, Amputation, Struck By, Caught Between, Scaffold, Ladder, Roofing Safety, Amputation, Excavation/Trenching, Crush, Traffic Control, Multi-Employer, Cranes, Confined Space, Demolition, Directional Drilling, Electric, Equipment, Machine Guarding, Excavation, Paving, Power Tools, Rigging, Shoring. Successfully implemented numerous nationally and internationally accepted safety management systems involving multiple training programs, inspection tools and accident investigation methods....

Information Technology, Computers - Digital Forensics, Cell Phone Forensics, Data Recovery, eDiscovery, Video/Audio Forensics, Computer Forensics, DVR Forensics, Password Recovery, Social Media Forensics, Email Forensics, Spyware, Embezzlement, Trade Secret Theft, Fraud, Cyberstalking, Deleted File Recovery, Document Authentication

...I am an EnCase Certified Examiner (EnCE), a Certified Computer Examiner (CCE), an Oxygen Forensic Expert (OFE), and a Certified Data Recovery Specialist (CDRS) with experience in all industry-recognized commercially available digital forensic tools.

Transportation, Management - Accidents, Product Liability, Fleet Maintenance,Tractors, Trailers, Trucks, Cars, Airplanes, Sanitation Trucks, Procurement, DOT & FMCSR Regulations, Transportation Industry Best Practices.

...He has provided world class Fleet Maintenance Management by developing methodical policies and procedures monitored by performance metrics ensuring regulatory compliance while simultaneously providing leadership with the tools and authority to effectively assist their customers. Subject Matter Expert / Litigation Support - MCB Consulting consistently decreases deposition and trial preparation time and increases the probability of successful judgments. He has assisted attorneys for both plaintiffs and defendants in gaining a greater settlement or mitigating a client’s losses. Litigation Procedure – Once we have exchanged a signed NDA (Non-Disclosure) Agreement, I will make an initial review case and determine if and how the case can be supported. An initial report will be tendered defining these key points. An interrogatory (report) will be developed outlining in explicit detail how the case will be supported for the client (Plaintiff or Defendant)....

OSHA, Construction - OSHA, Construction, Fall Protection, Multi-Emplyer, Fall Prevention, Slips, Trips, Falls, Scaffold, Work Zone, MUTCD, Crane, Steel Erection, Excavation, Silica, Lead, Tunnel, Confined Space, MEWP, scissor lift, aerial lift, Struck by Equipment, back over, catastrophic injury, amputation, crush

...Army Corps of Engineers • Excavation, Trenching, & Soil Mechanics • Slip, Trip, Falls, Stirs & Floor Safety Certified Walkway Auditor, Certified Forensic Slip Expert (CFSE) • Fall Protection, Fall Prevention, Personal Fall Arrest Systems (PFAS), • Forklift & Lull Safety • Hand & Arm Safety • Hand Tool Safety • Heavy Construction Equipment back over, run over, and struck by • High Visibility Safety Apparel • Marine & Barge Safety • NFPA 101 • NFPA 70E • OSHA Crane Signals • OSHA Whistle Blower protections for safety related matters • Permit Required Confined Space & Rescue Planning • Pile Driver Operations • Rapid Water Rescue • Respirator Fit Testing and Use • Roadway & Work zone Safety, Flaggers, and Temporary Traffic Control Devices (MUTCD) Construction Signage • Safety Training, Failure to train, inadequate training, and other safety training issues....

Mechanical Engineering, Equipment & Machinery - Cranes & Hoists, Printing & Packaging Equip, Bowling Machinery, Agricultural Equip, OSHA, Machinery Maintenance Practices, Conveyors, Hand & Power Tools, Ladders, Workplace Safety, Slip Trip & Fall, Premises Liability, Safety, Warnings & Label Evaluation, Metalworking Equip, Aerial Work Platforms

I have served on the ANSI A14 Ladder Safety Committee since 1995 and currently Chair the Mobile Ladder Stands and Mobile Ladder Stand Platforms Sub-committee. In addition, I serve on the Executive committee which reviews and votes on all ladder-related standards in the A14 family, the A14 Steering Committee, the Labeling Task Force and the Ladder Accessories Sub-committee. I have an extensive background in the Bowling Industry having served my Mechanical Engineering internship with the Brunswick Corp. Automatic Pinsetter division. I have also had ownership interest in two Chicagoland bowling centers. I have performed mechanical and electrical maintenance on Automatic Pinsetters since 1974 in addition to having provided instruction to several dozen apprentice mechanics in the operation of the Pinsetter and related bowling equipment and continue to do so today. I continue to provide expert witness and consulting services to both major bowling equipment manufacturers including Brunswick...

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...His research includes both basic and applied forensic studies to develop fundamental understandings of fire dynamics, pattern formation and damage assessment as well as to develop practical forensic tools for fire scene investigations and analyses. Dr. Gottuk has been active in and a member of the NFPA 921 Fire Investigations Technical Committee for over 20 years. He is a contributing author and editor of the SFPE Handbook of Fire Protection Engineering and an author of chapters in NFPA Fire Protection Handbook, and the National Fire Alarm and Signaling Code Handbook. Topics of Dr. Gottuk’s research include compartment fires; liquid fuel fires; flammable gas fires; electrical fire analysis (beading and other signatures); tools and methods for calcination measurements and analysis; the development and analysis of clean burn; ignitable liquid residue sampling; and effects of accelerants on fire development. Dr....

Financial, Pediatric Hematology Oncology - Appraisal and Valuation, Banking, Business Valuation, DNA, Financial, Securities and Investments, Biotechnology, Medical Devices, Healthcare Services, Life Science Tools , Pharmaceuticals , Entrepreneurial Companies, Start-up companies

Ilonna Rimm can provide expert witness services related to valuation and financial analysis of Healthcare Companies, including Biotech, Medical Device, Healthcare Services and Life Science Tools companies. Ilonna Rimm, MD PhD CFA, is a healthcare investor who provides strategic advice on raising early-stage capital. As the CEO and Founder of Morninglight Healthcare Capital, LLC, a family office, she invests in small cap public companies (0 to $4B market cap). She also serves as an Advisor to Life Sciences CEO’s who are raising a Seed or Series A Round of capital, as Rimm Healthcare Capital Advisory, LLC. She can fully understand the biological science of an emerging company. Then she can organize and polish the science to present it in a way that is attractive to life science investors. She recently provided services to Immuneering Corp., who raised a Series A round of $20M in January, 2020, and a Series B round of $62M in January, 2021....

Motorcycle, Failure Analysis - Accident Reconstruction, All Terrain Vehicle, UTV, Side by Side, Electrical Engineer, Throttle Design, Dealership, Snowmobile, Power Steering, Consultant, Fire, Electronics, Accessory, Rollover, Polaris, Ranger, Speed Sensor, Root Cause Analysis, Trade Practices, Patent, Arctic Cat, Trademark, ATV

...I use diagnostic tools to aid with root cause analysis, data capture and accident reconstruction. Decades of experience in developing blueprints and other specifications and can interpret them at an expert level. I have developed technology for dozens of OEMs and tier 1 suppliers and can readily identify alternative designs to flawed ones that were implemented.

Economics, Business Damages - economic damages, business damages, personal injury, medical malpractice, wrongful death, business valuation, present value, statistics, stochastic simulation

...Jackson is qualified to calculate economic damages using the appropriate tools to match the details of each specific case. He authors a quarterly Economic Outlook report which is heavily cited by the media.

Ophthalmology - Retina Specialist, vitreo-retinal specialist, retinopathy of prematurity, diabetic retinopathy, retinal detachment, macular degeneration, endophthalmitis,

...I also introduced a retina knowledge assessment tool that improved our resident OKAP (Ophthalmic Knowledge and Assessment Program)

Metallurgy, Failure Analysis - Design Defects, Material Selection, Engineering, Manufacturing Defects, Manufacturing, Quality Control, Mechanical Failure, Corrosion, Fitness for Use, Equipment Operation, Equipment Maintenance, Trade Secrets

...Cases have involved hand tools, recreational and exercise equipment, fire fighting apparatus, rotating machinery, construction hardware, fasteners, joints, piping, tubing, lighting fixtures. 40+ yrs designing, manufacturing and quality assurance of components for consumer & industrial products including safety and performance-critical applications for aircraft, automotive safety systems, medical products, construction machinery, defense arms and munitions. Mr. Caldwell has testified in patent infringement and trade secret misappropriation cases. He has lectured in the USA, Europe and India on manufacturing premium quality metal products. He has published in the areas of batteries, materials selection and materials processing. Licensed Professional Engineer, Ohio. US Patent holder.

Safety, Industrial Hygiene - Construction, Research and Development, Environmental, Occupational Health, Noise, Accident Investigations, Risk Management, Fatality Investigations, ISO Management Systems, Insurance, Emergency Management, Drug/Alcohol Use Management, Behavioral Management, Training, Contractor Safety, Owners Rep.

...Accomplished a 45% increase in the use of a project auditing tool by all project team members across the Division, management and integration of projects associated with a major acquisition (and a different safety culture) and achieved over a 70% and 60% reduction, respectively, in Total and Lost time incident rates. Vice President Loss Control and Safety – 2013 - 2015 - Silverstein Properties Inc. New York, New York • Recruited into the position of Vice President of Loss Control and Safety in the Risk Management group of the Silverstein Properties organization. Responsibilities include liaison with general contractors and insurance brokers and insurance companies providing Owner controlled Insurance program coverage for multiple high rise construction projects throughout New York City including three buildings at the world trade center redevelopment site and other sites around the greater New York area as well as sites throughout the United States and Asia Pacific region....

OSHA, Safety - Fall Protection, Construction, Construction Safety, Industrial Safety, Slip/Trip/Fall, Construction Accidents, Scaffold safety, Ladders, Ladder Safety, Trenching & Excavation, Excavation Safety, Trench Safety, Power Tools, Forklifts, Powered Industrial Trucks, Standard of Care, Machine Guarding

Cheryl Scanlon-Zinner is a board-certified safety professional with over twenty-five years of experience developing and implementing occupational safety programs in construction and general industry for employers, corporations and government agencies. She has trained thousands of management representatives, supervisors, and competent persons on the principles and practices of safety management, hazard identification, hazard evaluation and the implementation of the hierarchy of controls. She specializes in hazards that are likely to cause serious injuries and fatalities (SIFs), including falls from elevation, and other construction hazards, machinery hazards, forklifts, and ladders. She was the technical editor of Nigel's Ellis's textbook Introduction to Fall Protection. Cheryl is a member of several professional safety organizations. She was the president of the Philadelphia chapter of the American Society of Safety Professionals and is active in that organization. She was awarded the...

Telecommunications, Software Engineering - cell tower records, call detail records, call records, historical cell site analysis, cell site location information, CSLI, CAST, cellhawk, sting-ray, drt box, GPS, coverage, patents, software, telecom, cellphones, triangulation, SIMs

...David was the primary author of OpenBTS, a widely used tool for cellular technology education, cellphone testing, cellular security research, and basic cellular service in some public networks. He developed the signal analysis and target location algorithms and software for cellphone tracking systems used successfully by US special forces in combat operations, and worked on several US government projects in the area of telecommunications intelligence collection.

Hospitalist - Adult hospital Medicine, hospital acquired conditions, medication errors, pressure ulcers, post-ICU care, chronic respiratory failure, tracheostomy, prolonged mechanical ventilation, falls, delirium.

...Furthermore, I have acquired proficiency in Point of Care Ultrasound (POCUS), utilizing this valuable tool to aid in diagnosis and treatment decisions.

Accident Reconstruction, Firearms & Ballistics - Ammunition Reloading, Hunter and Bowhunter Safety, Tree Stands, Hunting Accident Investigation, Shooting Accidents, Firearms and Ballistics, Firearms Safety, Shooting Scene Reconstruction, Hunting, Hunting Laws, Archery, Crossbow, Hunting Related Shooting Incidents, Natural Resource Officer Training

...We also served as Directors of the International Hunting Incident Investigation Academy, teaching over 1200 wildlife officers the specific “CSI in the Woods” skills necessary to properly investigate and document these incidents, many of the methods and tools were created by us. Co-authored the book, “ Blood On The Leaves, Real Hunting Accident Investigations - And Lessons In Hunter Safety”. Over 60 years combined experience teaching the Hunter Education and Bowhunter Education classes required in all 50 states. Experienced in using and teaching the safe use of a wide variety of archery equipment, crossbows, handguns, rifles, shotguns, airguns, muzzleloaders and related hunting and shooting equipment such as tree stands and decoys. As retired Wildlife Officer Supervisors we offer insight into reviewing forms and investigations and finding all the facts.

Economics, Business Damages - economic damages, business damages, personal injury, medical malpractice, wrongful death, business valuation, present value, statistics, stochastic simulation

...Jackson is qualified to calculate economic damages using the appropriate tools to match the details of each specific case. He authors a quarterly Economic Outlook report which is heavily cited by the media.

Cybersecurity, Technology - Digital Forensics, Cell Phones, Call Data Records, Digital Security, Hacking, Intellectual Property, Password Cracking, Mobile Forensics, E-Discovery, Cyber Security, Investigation, Computer Hacking

...Skilled in network management, Digital Forensics, Blacklight forensic software, AccessData AD lab forensics software, Internet Evidence Finder (IEF), Griffeye modular digital investigation platform, Cellibrite UFED 4PC mobile device forensics, evidence collection and chain of custody procedures, write-blocking forensic imaging hardware tools. Strong professional currently enrolled in a M.S in Digital Forensics program at Champlain College. Holds a B.S. in Communications from Liberty University and a A.S. focused on Information Systems Technology from Community College of the United States Air Force....

Accident Reconstruction, Transportation - Commercial Vehicle Accident,Truck ECM Imaging, Trucking Accidents, Certified DOT Inspector, Bus Accidents, Passenger Vehicles, Pedestrian/Bicycle, Motorcycle Reconstruction, Bosch/Hyundai/Kia Crash Data Retrieval, Occupant Kinematics, Aerial Drone Forensic Mapping, 3-D Animation, ACTAR Accredited

...We are equipped to image and evaluate Engine computer data (ECM) as well as Airbag Control Modules utilizing the Bosch CDR tool and the Hyundai/Kia Tool. Our firm is staffed with a certified DOT Inspector and State Inspection Mechanic. Each investigation and reconstruction includes an inspection of the involved vehicles to document damage and check for mechanical failures. Proper scene documentation and measuring is essential to a through crash reconstruction. Our 24 hour quick response team will respond and document the crash scene before evidence disappears. Our FAA Licensed Drone Pilot will provide aerial documentation to be utilized in 3-D scale modeling. Mr. Connolly is a Court Certified Expert Witness in Local Court, Commonwealth Court and Federal Court. He assesses the evidence and provides opinions based on the facts. He has testified for both plaintiff and defense in Depositions, Meditations and Civil and Criminal trials. Mr....

Medical Devices, Intellectual Property - Patent Infringement, Inter-party review, Infringement contentions, Claim Construction, Medical hand tools, CMOS Camera, Endoscope, Electrosurgical Generator, Laser, Urological Stent, Stone Basket, Guide Wire, Cysto-resection, Lithotriptor, Ureteroscope,

40+ years of experience in the development and market introduction of engineering intensive (hardware, software, mechanical, optical) products including multiple class II medical devices. -- Generated and defended expert reports on validity (IPR and district) and infringement. Prepared and delivered training material for presentation to judge. Worked closely with counsel on claim construction, infringement contentions, and rebuttal of invalidity reports. Prepared for hearings on motion for summary judgement. Prepared for trial with favorable settlement. -- Worked with counsel on the preparation of patent applications and responses to office actions. Conferenced with the patent examiner on prior art citations and claim amendment. -- Led multi-site R&D organizations of up to 40+ people & $8MM+ budgets. -- Brought diverse products to market including endoscopic and laparoscopic video cameras: urological wires, stents, and baskets; flexible, rigid, and semi-rigid scopes (conventional...

Architecture, Construction - Healthcare Architecture, OSHPD, BIM, Integrated Project Delivery, Lean Construction, Construction Defects, Construction Claims, Quality Control/Quality Assurance, Hospitals, Schools, Slip and Fall, ADA, Contractor Non-Conformance, NAVFAC, Change Orders, Owner Payment Claims.

...Facility Management in the 21st Century,” International Facility Management Association (IFMA) Conference, San Francisco, California, 2010 “TWI—Training Within Industry,” Lean Construction Congress, San Francisco, California, 2009 “Creating Quality Systems for the Architectural Practice,” AIA, Boston, Massachusetts, 2008 “Making the Most of Your Millennials,” AIA National, Training Podcast, 2008 “Project Staff Training Using Training Within Industry (TWI) Tools,” AIA National, Podcast, 2007 “Beyond Redlines: Quality Management in the Architecture Firm,” AIA, San Antonio, Texas,

Accident Reconstruction, Products Liability - Truck, Vehicle, Animations, Night Lighting, Crime Scene Reconstructions, Whiplash, Product Liability, Pedestrians, Motorcycle, Fork lift , Crane, Dart Out Accident, Slip and Fall, Fires Simulations, Explosion, Rain, Fog, Snow, Train, Crane, Lift, Vault, medical malpractice, Patent, Sun glare

...It is difficult to imagine a more effective tool (than animations) for enhancing your case presentation." The Judge also stated in a trial transcript- "animation would show in approximately two minutes the... entire theory of the case and the testimony of the expert, along with that of numerous other eye witnesses which would otherwise probably take two days of trial time." An American Bar Association study discovered that, "after three days...the combination of verbal and visual delivery of information is remembered six times as effectively as verbal delivery alone." 6- Scott's fee is 51% less than 2021 American Re-constructionists averages 7- Clients have received large financial savings for cases, because almost all attorneys postpone deposition costs until after the usual 87% which settle early with animations (2010 study)....

Economics, Business Damages - economic damages, business damages, personal injury, medical malpractice, wrongful death, business valuation, present value, statistics, stochastic simulation

...Jackson is qualified to calculate economic damages using the appropriate tools to match the details of each specific case. He authors a quarterly Economic Outlook report which is heavily cited by the media.

Mechanical Engineering, Failure Analysis - Mechanical Engineering, Materials, Failure Analyis, Forensic Engineering, Manufacturing, Design, Warnings - Marketing Defect, Oil & Gas, Metallurgy, Stress, Root Cause, Safety Hierarchy Application, Laboratory Analysis, Inspection, Firearms, Electronics, Field Investigations, Fracture Surface

...The first 8 years were in industry engineering roles involving process development and tooling design, as well as extensive laboratory failure analysis. During his over 20+yr. academic career he has held multiple industry appointments simultaneous with his academic role, in addition to his independent consulting work. He provides forensic engineering services involving product design, manufacturing defects, and warnings/instructions (marketing defects). He is a licensed professional engineer (P.E.) in Texas and has an active NCEES record to facilitate licensing in other states. Dr....

Psychology, Mental Health - Video Games, Clinical Psychology, Psychological Assessment, Forensic Psychology, Anime, Technology, Video Game Addiction, Parenting, Therapy, Research, Social Media, Methods, Geek Therapy, Security Clearance, Popular Culture

...Bean utilizes validated assessment tools to provide objective and thorough evaluations, contributing valuable information to legal decision-making. His testimony is not only informed by professional competence but also by a commitment to clarity and accuracy, ensuring a robust foundation for legal deliberations. Dr. Bean has been published in national and international journals, news reports, and books. He is the well known editor of the Geek Psychology Series exploring how popular culture impacts us via a multi-modal approach. His website can be found here: https://anthonymbean.com/#

Telecommunications, Software Engineering - cell tower records, call detail records, call records, historical cell site analysis, cell site location information, CSLI, CAST, cellhawk, sting-ray, drt box, GPS, coverage, patents, software, telecom, cellphones, triangulation, SIMs

...David was the primary author of OpenBTS, a widely used tool for cellular technology education, cellphone testing, cellular security research, and basic cellular service in some public networks. He developed the signal analysis and target location algorithms and software for cellphone tracking systems used successfully by US special forces in combat operations, and worked on several US government projects in the area of telecommunications intelligence collection.

Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling

...His research includes both basic and applied forensic studies to develop fundamental understandings of fire dynamics, pattern formation and damage assessment as well as to develop practical forensic tools for fire scene investigations and analyses. Dr. Gottuk has been active in and a member of the NFPA 921 Fire Investigations Technical Committee for over 20 years. He is a contributing author and editor of the SFPE Handbook of Fire Protection Engineering and an author of chapters in NFPA Fire Protection Handbook, and the National Fire Alarm and Signaling Code Handbook. Topics of Dr. Gottuk’s research include compartment fires; liquid fuel fires; flammable gas fires; electrical fire analysis (beading and other signatures); tools and methods for calcination measurements and analysis; the development and analysis of clean burn; ignitable liquid residue sampling; and effects of accelerants on fire development. Dr....

OSHA, Slip Trip & Fall - Fall Prevention , Material Handling , Electrical Safety, Signs Signals Barricades, Ladders, Stairways , Working at Heights, Hand Tools, Steel Erection, Excavation, General Safety, Welding, Scaffolding, Confined Space, PPE, HazMat, Aerial Man Lifts, Respirators, Fire Prevention, Cranes and Rigging

30 plus years in construction of which14 years in construction safety. Achieved a Certified Safety and Health Official from Texas A&M University College of Engineering TEEX in 2013. Employed by TEEX from 2013-2015 as an Adjunct Professor teaching OSHA related course. Subject Mater Expert Student Fall Prevention/Protection Textbook TEEX. Train the Trainer OSHA CFR 1926 Train the Trainer industrial and Extendable-boom Forklifts, Aerial Manlifts, Structural and Aerial Suspension Scaffolding. Served in the USAF 3 years 3 months and 15 days as a C130 Aircraft Electrical Tech. Received an Honorable Discharge. Expert Witness Construction Fall Protection Cause 37360 223 District Court Gray County Settled prior to trial. Oilfield Crane-Rigging-Signaling Cause B192-633 District Court Jefferson County Settled prior to trial. Construction Motorized Manlift Cause 67795-A Smith County Settled prior to trial. Constuction Concrete Pumping Cause DC-17-10426 284th Judicial District Court Settled prior...

Accident Reconstruction, Biomechanics - Accident reconstruction, Biomechanics, Event Data Recorder (EDR) Analysis, Engine Control Module (ECM) Analysis, Low-speed analysis, Site survey, Vehicle damage analysis, Photogrammetry, Acceleration force analysis, Delta-V determination, Momentum analysis, Lane change analysis, computer animation

...His consulting specialties are commercial (18-wheeler), private vehicle and forklift accident reconstruction, biomechanics, fatigue failure analysis, mechanical failure analysis, and machine tools failure analysis. Mr. Holloman also has trial and deposition testimony experience, having testified in trial or deposition in over 25 cases. Mr. Holloman’s continuing education includes biomechanics, commercial vehicle accident reconstruction I & II, commercial vehicle accident investigation courses, forklift operation and safety, OSHA compliance, and event data retrieval report analysis. Mr. Holloman has given presentations on insurance fraud and motor vehicle collisions to the Texas Farm Bureau, and commercial vehicle accident reconstruction to law firms, the American Association for Justice (AAJ), and the Tennessee Trial Lawyers Association.

Business Operations, Aviation & Aerospace - International Business Development, International Trade, International Arms Trade, Manufacturing, Environmental and safety compliance, Plant Management, Business Practices, Corporate Investigations, Business Practices, Business Administration

...Functions included metal fabrication, composites, aircraft wiring, assembly, tooling, and systems integration of components such as horizontal stabilizers, nacelles, flight controls, wings, and assembly of the aircraft. - Electronics manufacturing: PCB manufacturing, “black” box assembly, test, and sub-system integration. - Aircraft modification, integration and testing: design, development, test and delivery of highly complex systems including airborne and ground-based avionics, weapons and surveillance systems. - Operational maintenance of aircraft. He has been engaged as an expert witness for business practices and executive management. In addition, he was a fact-witness in intellectual property, trade secrets, and anti-trust cases before becoming a consultant. The manufacturing plants he over saw had significant environmental considerations and he is well versed in the obligations of compliance and management duties for all aspects of plant management.

OSHA, Safety - construction safety, accident investigation, safety training, OSHA disputes, job-site audits, fall protection, stairways and ladders, OSHA authorized trainer, employee rights, employer requirements, documentation, safety policies, OSHA inspections, scaffolds, boom lift, scissor lift, forklift, PPE

...Inspect tool and equipment for safe and proper use and condition, engage with employees in discussions about their personal safety and health, correct issues found during the inspection, produce a report detailing my findings. Corporate safety manual implementation Write the safety manual for a corporation that encompasses the safety and health concerns of the company. Policy/procedure implementation Analyze an area of concern, observe the current method for this task, research best practices and what leaders and colleagues in the industry are doing, then, with this information, write and implement the new policy/procedure. Safety Training Conduct trainings in all aspects of safety, including Competent Person training, OSHA Outreach 10 and 30 hour- Construction, First Aid, CPR, AED, heavy equipment operator training. Documentation Review Review documentation from clients. From review of their safety manual, to OSHA citation paperwork, to depositions for my opinion. Mr....

Software Engineering, Intellectual Property - Software Industry, Source Code, Software Patents, Software Trade Marks, Software Antitrust, Software Trade Secrets, Source Code Review, Source Code Comparison, Source Code Misappropriation, Open Source Licensing, Source Code, Computer Forensics

.... • Regular use of proprietary and licensed tools and software to assist with source code analysis and performance testing, load testing, data recovery and extraction, metadata review and management, and e-discovery. • Experience performing analyses supporting matters involving alleged evidence destruction where negative inferences, death penalty sanctions, or other relief is sought by a party. Practical Implementations of Expertise: • Review and comparison of software source code and functionality in relation to contractual commitments and requirements and/or protected intellectual property including, trade secrets, copyrights, and patents. • Computer/software forensics – able to reverse engineer and reconstruct hardware and software environments from backups, remnants, and fragments of deprecated software....

Mechanical Engineering, Metallurgy - Product Liability, Failure Analysis, HVAC, Oilfield, Heavy Equipment, Cranes, Cables, Medical Devices, Plastics, Boilers, Water Heaters, Plumbing

...Assignments have involved mechanical equipment, appliances, oil and gas transmission equipment, plumbing, HVAC, heavy equipment, machine tools, cranes and wire cables, manufacturing processes, and thermal processes, among many others.

Mechanical Engineering, Structural Engineering - Ziplines & Trampoline Courts: Physics, engineering, industry standards, safety & rescue procedures, state and local regulations, and testing. Over 70 expert engagements and zipline building projects in over 30 U.S. states; Several more in Puerto Rico, Mexico, and Canada; 100% in the last four years.

...Brigham Young University 2015-2020 BS—Engineering Design & Technology University or College Name 2011-2014 2-yr—Machine Tooling Utah Valley University 1992-1994 CERTIFICATIONS Aerial Adventure Park-3rd Party Trainer & Inspector, 2017- present National-Board Certified Welder, 1998-2015 Utah Steel Construction Contractor, 1998-2008

Products Liability, Warnings & Labels - Injury, Illness, Product Liability, Premises Liability, Industrial Accidents, Warnings and Labels, OSHA, Worker's Compensation, Human Factors, Safe Equipment Design, Respiratory Protection, Respiratory Illness, Chemical Exposures, Dust, Asbestos, Silica, Lead, Temperature Extremes, Laboratory Safety

...Prevention through Design (PtD) emphasizes the elimination of hazards associated with the design of products, equipment, tools, materials, and systems. I have been involved in Prevention through Design efforts at the national level. I have served on an advisory committee of the National Institute for Occupational Safety and Health (NIOSH) concerning the development of PtD initiatives. I am the author of a textbook chapter on the subject in the Handbook of Industrial and Systems Engineering.

Computers, Internet - Cell Phone Forensics, Smart Phone Forensics, Computer Forensics, Cellular Location Data Analysis, E-Discovery, iPhone Forensics, Mobile Forensics, Criminal Defense, Civil Litigation

...Authored chapter on Mobile Forensic Analysis Tools in academic text

Accident Reconstruction, Products Liability - intersection crash, motorcycle safety training, throttle, brakes, engine, rollover, EDR, surveillance video, dashcam, telematics, ATV UTV SxS, snowmobile, watercraft, PWC, skateboard, scooter, off-road, OHV, racetrack, OHRV, motocross, ABS, ESC, failure, drivetrain, BMX, bike, Harley-Davidson

...He uses advanced tools for site and vehicle documentation, retrieval of electronic crash data (CDR), forensic video analysis, and computer simulations / animations. He is a skilled mechanic and adept at testing products or vehicles to collect objective data. An experienced instructor, he has testified as an expert witness in depositions, trials, and mediations since 2008. His engineering career with motorcycles and ATVs spans two decades of product development at OEM suppliers, crash analysis at forensic firms, and defect evaluations at a vehicle testing firm. He has evaluated large-scale recalls and crashes involving vehicle stability, controls, electronic aids, suspension, and overall vehicle design. He has consulted manufacturers on product design and the US Border Patrol on ATV safety. He is a lifelong powersports enthusiast and enjoys applying insights gained from off-road racing, performance vehicle tuning, and his first-hand experiences of vehicle crash behavior. Mr....