13 Electrical Fires And Explosions Expert Witnesses Found

Results Sorted Below by State

Daniel . Gottuk, PhD Gottuk Engineering

Alabama
Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Joseph Quinn, M.S., P.E. Materials FACT

Los Angeles, California
Failure Analysis, Metallurgy - Automobile, Aviation & Aerospace, Motorcycle,Appliance, Engineering, Construction, Construction Defects, Corrosion, Maritime, Equipment & Machinery, Mining, Bicycles, Transportation, Medical Devices, Manufacturing, Plumbing, Products Liability, Fire, Electricity, Pipe, HVAC, CPVC, Oil & Gas, Welding
Joseph Quinn, MS, PE, is a Forensic Metallurgy and Metallurgical Engineering consultant. He is a Licensed Professional Engineer in Metallurgical Engineering and is registered in 7 states (CA, PA, UT, NV, AZ, CO, WA). He has provided over 1,000 Failure Analysis investigations on metallic and non-metallic (glass, plastic, rubber, and composite) materials or products. Mr. Quinn provides metallurgical and materials consultation, expert witness testimony, and forensic failure analysis for civil litigation with retentions by defendants and plaintiffs. He has received awards in the International Metallographic Contest and has conducted several presentations on metallurgical engineering and failure analysis subjects at universities, ASM meetings, and industry events. He is President of the National Society of Professional Engineers in California (NSPE-CA) and is active in several technical societies....

Taylor A. Russell, P.E., CAP, CFEI Engineering Design & Testing Corp.

Concord, California
Electrical Engineering, Industrial Design - Industrial Automation, Building Automation, Power Systems, Electrical Design & Construction, Battery Technology, Power Electronics, Control Systems, Manufacturing, Water Treatment, Wastewater Treatment, Arc Flash, Fires and Explosions, Code Compliance
Forensic Electrical Engineer with over a decade of experience in the design, construction, testing, and commissioning of power and automation systems for utilities, industry, and commercial applications. Expert in determining the cause of electrical and control system failures, electrical fires, arc-flash incidents, battery fires, and utility power systems. Licensed in most western states. Certified Automation Professional (ISA), Certified Fire & Explosion Investigator (NAFI).

Daniel . Gottuk, PhD Gottuk Engineering

Florida
Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Joseph J Jaskulski, PE Project Performance Group LLC

Evanston, Illinois
Mechanical Engineering, Energy - Power, generation, power plant, operation, maintenance, commissioning, testing, performance, insurance, construction, defect, efficiency, turbine, boiler, contractor, design build, EPC, infrastructure, gas, coal, steam, failure, wind, solar, boiler, turbine, wood, waste, root cause, cost, estimate
Expert witness on multiple technical and commercial issues in arbitration, state and federal court, and in front of regulatory commission environments. Deep expertise in power plant development, construction, operating and maintenance, and asset management. Numerous evaluations and audits of generating portfolios, including review of business processes and identifying/quantifying improvement opportunities/potential threats. Technologies include coal, oil, natural gas, wood, and waste-fueled facilities, simple and combined cycle power stations, and spark and diesel reciprocating engine-based power plants. Green energy experience, including, wind energy construction, smart grid implementation, building energy conservation measures, battery storage, and both concentrated and photo-voltaic solar generation....

John A Williams, PhD, PE, ASA, MBA, CFEI, AIChE Fellow EPS, Inc.

South Bend, Indiana
Energy, Intellectual Property - Intellectual Property, Appraisals & Valuations, Commercial Damages, Renewable Energy, Biogas, Biofuels, Wind, Solar, Geothermal, Biomass, Waste-to-Energy, Oil & Gas, Oil Refining, Fires, Explosions, Chemical Release, Product Contamination, Electricity, Coal Technologies, Chemistry & Chemicals
...Williams is a recognized expert in the engineering analysis and financial appraisals of energy, electricity, and process technologies; and intellectual property (patents, trade secrets, proprietary technology), licensing, royalty structures, market analysis, infringement, invalidity, pricing economics, and lost profit damages. Dr. Williams provides expert engineering, detailed technical and financial appraisals, licensing and royalties analysis, quantification of damages, litigation support, due diligence, and understandable testimony involving renewable energies including biogas, ethanol and butanol biofuels, wind, solar, geothermal, biomass and waste-to-energy; oil and gas, petroleum refining, and storage; electrical power generation, trading, and storage; and coal, char, steel and metals, agricultural and chemicals technologies. Dr. Williams analyzes the complex and expresses it in understandable technical, environmental, and financial terms. Dr....

Randy Gray, CHST, CSHM, GSP, OHST, BS, MS Grayhawk Advantage, Inc., dba. Grayhawk Safety & Health Consulting Company

Benton, Kentucky
OSHA, Safety - OSHA, Industrial Accidents, Safety, Industrial Hygiene, Loss Control, Risk Management, Slip Trip & Fall, Construction Accidents, Manufacturing Accidents, Insurance, Investigations
...Gray provides expert witness services in defense and plaintiff litigation matters, safety and health on-site audits, customized OSHA safety and health training, OSHA 10 and 30-hour construction and general industry training, and assistance for employers who have been issued citations that they need assistance with obtaining better citation settlement agreements and working in conjunction with legal counsel with litigation assistance contesting OSHA citations....

Daniel . Gottuk, PhD Gottuk Engineering

Ellicott CIty, Maryland
Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Robert (Rob) C Hoffman Jr, PE, CFEI Creative Product Solutions, LLC

Coloma, Michigan
Engineering, Safety - fire, shock, burn, appliance, product, design, test, code, safety, failure, analysis, warning, instruction, literature, product safety, containment, inspection, litigation, product liability, expert
Specialize in design for safety, force failure testing, and product litigation support for the consumer goods industry. Knowledge source in the US on appliance fires, with specific detailed knowledge on dryer fires and their causes. Qualifications: Registered professional engineer in the state of Michigan Certified fire and explosion investigator (CFEI) Master certified in design for safety Master certified in force failure testing Certified in experimental statistics and statistical process control Member of the UL Standards Technical Panel for appliance codes related to clothes washers and dryers I worked in the consumer goods industry in appliances for over 28 years, which gave me the opportunity to serve on the dryer safety committee for the American Home Appliance Manufacturers (AHAM), as well as work extensively with Underwriters Laboratory ( UL) and CSA....

James M. Miller, PE, PhD J.M. Miller Engineering, Inc.

Ann Arbor, Michigan
Safety, Agriculture Engineering - Accidents, Auto ADAS, Agriculture, Battery Fires, Cannabis Processing, Chemical Exposure, Child Safety, Construction, Electrocution, Ergonomics, Fitness Equip, Fires/Explosions, HazCom, Human Factors, HVAC, Mechatronics/Nano, Medical Devices, OSHA, Recalls, RV/ATV, Slip/Fall, Vapes, Warnings/Label
There are four PhD and registered Professional Engineers at Miller Engineering who are celebrating 40 years of Professorships at three universities along with providing services to Government, Insurance, and Industry—through research, publications, presentations, and expert testimony. These co-founders and associates are James M. Miller, PE, PhD; Mark R. Lehto, PhD; David R. Clark, PE, PhD; Adam M. Olshove, PE, MSE; and Jeffrey D. Rupp, MSE. Miller Engineering has a dedicated office with a full-time staff of engineers, researchers, and technical writers. The span of our collective academic and experiential expertise includes the Mechanical, Electrical, Chemical, Agricultural, Industrial, Human Factors, Ergonomic and Safety fields of engineering....

Steven Pietropaolo, MS, P.E., CFEI LGI Forensic Engineering, PC

North White Plains, New York
Engineering, Forensic Science - Forensic Engineering, Explosions, Electrical Engineering, Mechanical Engineering, Product Liability, Fires, Fire Protection, Appliances, Construction, Building Defects, Failure Analysis, Laboratories & Testing, Building Defects, Plumbing
Steven Pietropaolo has a Bachelor Degree of Engineering in Electrical Engineering and a Master of Science Degree in Mechanical Engineering from Manhattan College. Mr. Pietropaolo is a Licensed Professional Engineer (P.E.) in the State of New York, amongst many others. He is a Certified Fire and Explosion Investigator, a Certified Fire Investigator Instructor, a Certified Forensic Consultant and Certified Forensic Professional Engineer. He is a Fellow of the American College of Forensic Examiners Institute. He is Board Certified in Forensic Engineering by the National Academy of Forensic Engineers. He has 30+ years of hands on engineering experience including electrical, mechanical, materials, safety, human factors, fire protection, and construction. He has knowledge of codes and standards used in construction and industry including building codes and safety codes....

Daniel . Gottuk, PhD Gottuk Engineering

Texas
Fire, Engineering - Fire Protection Engineering, Arson, Smoke Detection, Fire Alarm, Fire detection, Smoke and CO alarms, Forensic engineering, Fire spread analysis, Fire recreation, Origin and cause investigation, Consumer products, Failure Analysis, Modeling
...Dan Gottuk is the President of Gottuk Engineering after a 30 year career with Jensen Hughes, with which he still maintains a relationship with a team of over 100 experts providing expert witness and failure analysis services for a range of specialties associated with fires and explosions, mechanical, electrical, construction, codes and standards, materials, chemical, metallurgical, process safety and concrete. Other specific service areas include: Arson Investigation, Origin & Cause Investigations; Fire Spread Analysis; Fire Modeling; Fire Testing; Sprinkler Systems; Inadvertent Discharge; Corrosion; Fire Alarm Systems; Smoke Alarms; Carbon Monoxide; Kitchen Hood Suppression; Battery Fires (including Lithium and Lithium Ion); Building Insulation Fires; Spray-Applied Fire-Resistive Materials (SFRM); Structural Fire Protection; Combustible Dust Hazards; Dust Explosions; Laboratory & Evidence Examination. Dr....

Johnie P. Spruiell, P.E. Integrity Forensics and Engineering, LLC

Sanger, Texas
Mechanical Engineering, Forensic Science - Electrical Engineering, Energy, Equipment & Machinery, Failure Analysis, Fire, Laboratories & Testing, Oil and Gas, Products Liability, Product, Plumbing, Leak, Warnings & Labels, Guarding, CSST, Gas Explosions, Natural Gas, Propane, LPG, Forensic Engineering, Expert Witness
LICENSURE: -Texas Professional Engineer License #57023 -Colorado Professional Engineer License #24555 -Mississippi Professional Engineer License #17888 -Alabama Professional Engineer License #35693 -North Carolina Professional Engineer License #049314 -South Carolina Professional Engineer License #37169 -Virginia Professional Engineer License #0402061315 -Michigan Professional Engineer License #6201069726 -Minnesota Professional Engineer License #58020 EDUCATION: -BSME, University of Texas at Arlington, 1978 AFFILIATIONS: -MEMBER, American Society of Mechanical Engineers (ASME) -SENIOR MEMBER, National Academy of Forensic Engineers (NAFE) -MEMBER, National Council of Examiners for Engineering and Surveying (NCEES) -MEMBER, National Society of Professional Engineers (NSPE) -MEMBER, Texas Society of Professional Engineers (TSPE) -Pi Tau Sigma -Tau Beta Pi PRIMARY AREAS OF EXPERTISE: -Fire and Explosion Analysis Fuel Gas Fires and Explosions Residential, Commercial, Industrial...